1992 Chevrolet Suburban Suspension Parts
Choose your Part Name for your 1992 Chevrolet Suburban
Image
Product
Price
- SPINDLES
- 2" LOWERING SPINDLES FITS 92-98 GM 1500 2WD SINGLE CAB, 88-91 EXT CAB & 454 SS ALL CABS REQUIRES MINIMUM 15" WHEEL W/ 3.5" BACKSPACING OR LESS MAXTRAC SUSPENSION DOES NOT RECOMMEND USING WHEELS WIDER THAN 9" OR WHEELS WITH LESS THAN 4.5" BACKSPACING. DOING SO WILL RESULT IN VOIDING ANY AND ALL MANUFACTURER WARRANTIES
- MAXTRAC SUSPENSION'S PART# 100520H IS A PAIR OF 2" LOWERING SPINDLES CAST FROM STEEL & E-COATED BLACK
Additional Fitment Information:
| Vehicle | Drive Type |
|---|---|
| 1992 - Chevrolet Suburban | RWD |
- SHOCKS
- FRONT SHOCK - STOCK HEIGHT (1 PC) SHOCKS MUST BE MOUNTED WITH THE BODY OF THE SHOCK AT THE BOTTOM & THE SHAFT AT THE TOP INCLUDES QUANTITY 2, LARGE DIAMETER STEM BUSHINGS & WASHERS INCLUDES QUANTITY 1, BAR PIN FOR A 2.5-3" BOLT PATTERN FEATURES A VULCANIZED RUBBER LOWER BUSHING 15.0" EXTENDED, 9.5" COLLAPSED MAXTRAC SUSPENSION DOES NOT RECOMMEND USING WHEELS WIDER THAN 9" OR WHEELS WITH LESS THAN 4.5" BACKSPACING. DOING SO WILL RESULT IN VOIDING ANY AND ALL MANUFACTURER WARRANTIES
- MAXTRAC SUSPENSION'S PART# 1450SL IS A SINGLE STEM-TO-LOOP FRONT SHOCK: TWIN TUBE, STEEL BODY, BLACK
Additional Fitment Information:
| Vehicle | Drive Type |
|---|---|
| 1992 - Chevrolet Suburban | RWD |
- SHOCKS
- FRONT SHOCK - 3" DROP HEIGHT (1 PC) SHOCKS MUST BE MOUNTED WITH THE BODY OF THE SHOCK AT THE BOTTOM & THE SHAFT AT THE TOP INCLUDES QUANTITY 2, SMALL DIAMETER STEM BUSHINGS & WASHERS INCLUDES QUANTITY 1, BAR PIN FOR A 2.5-3" BOLT PATTERN 12.3" EXTENDED, 8.1" COLLAPSED MAXTRAC SUSPENSION DOES NOT RECOMMEND USING WHEELS WIDER THAN 9" OR WHEELS WITH LESS THAN 4.5" BACKSPACING. DOING SO WILL RESULT IN VOIDING ANY AND ALL MANUFACTURER WARRANTIES
- MAXTRAC SUSPENSION'S PART# 1200SL-1 IS A SINGLE STEM-TO-LOOP FRONT SHOCK: TWIN TUBE, STEEL BODY, BLACK
Additional Fitment Information:
| Vehicle | Drive Type |
|---|---|
| 1992 - Chevrolet Suburban | RWD |
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
15567821, 45G11073, 602.66016, FB776, GK6327, JBU909, K-6327, K6327, MK6327, SK6327
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1992 - Chevrolet Suburban | Front Lower |
- SHACKLES
- 1.5"-2" REAR SHACKLES COMES WITH SELF TAPPING GREASE FITTINGS BUSHINGS DO NOT COME GREASED AND REQUIRE A SYNTHETIC OR LITHIUM GREASE THESE WILL ACT AS 1.5"-2" LIFT SHACKLES ON THE 98-09 RANGERS MAXTRAC SUSPENSION DOES NOT RECOMMEND USING WHEELS WIDER THAN 9" OR WHEELS WITH LESS THAN 4.5" BACKSPACING. DOING SO WILL RESULT IN VOIDING ANY AND ALL MANUFACTURER WARRANTIES
- 1.5" - 2" REAR LOWERING SHACKLES
- MAXTRAC SUSPENSION'S PART# 410520 IS A PAIR OF 1.5"-2" REAR SHACKLES FABRICATED FROM STEEL & POWDER COATED GREY
Additional Fitment Information:
| Vehicle |
|---|
| 1992 - Chevrolet Suburban |
- EZ-990 Helper Spring Kit
- For Use on 2.5" Wide Spring without rear A/C
- EZ-990 Helper Spring Kit - Step Bracket Style Leaf 2.5
- Hellwig's medium-duty EZ-990 Helper Springs pack a lot of capability in every box. Packaged complete with the same heavy duty powder coated and plated components, hardware and installation instructions as our heavy duty helper spring products, these kits are designed for the vehicles that need lighter assistance in carrying a load. Simple bolt on design using common hand tools provide the installer ease of installation and the vehicle owner hassle free use. Ideally suited for light towing and loads, these units are fully adjustable using the heavy duty U-bolts included in the kit using simple hand tools. If your tow and haul needs change, simply adjust the heavy duty U-bolts to suit the new load requirements. Once installed and adjusted you are free to haul or tow with greater control and stability. Manufactured with heat treated ASTM 5160 alloy spring steel in our California based facility, these units are rated up to 2,000 lb. level load carrying capacity. They are a great cost effective spring solution and can be adjusted independently for uneven side to side loads.
Additional Fitment Information:
| Vehicle |
|---|
| 1992 - Chevrolet Suburban |
- SHOCKS
- FRONT SHOCK - 2" DROP HEIGHT (1 PC) SHOCKS MUST BE MOUNTED WITH THE BODY OF THE SHOCK AT THE BOTTOM & THE SHAFT AT THE TOP INCLUDES QUANTITY 2, SMALL DIAMETER STEM BUSHINGS & WASHERS INCLUDES QUANTITY 1, BAR PIN FOR A 2.5-3" BOLT PATTERN 13.3" EXTENDED, 8.6" COLLAPSED MAXTRAC SUSPENSION DOES NOT RECOMMEND USING WHEELS WIDER THAN 9" OR WHEELS WITH LESS THAN 4.5" BACKSPACING. DOING SO WILL RESULT IN VOIDING ANY AND ALL MANUFACTURER WARRANTIES
- MAXTRAC SUSPENSION'S PART# 1300SL-1 IS A SINGLE STEM-TO-LOOP FRONT SHOCK: TWIN TUBE, STEEL BODY, BLACK
Additional Fitment Information:
| Vehicle | Drive Type |
|---|---|
| 1992 - Chevrolet Suburban | RWD |
Showing 1 - 7 of 7 products
Loading...