2001 Jeep Wrangler TJ Suspension Parts
Choose your Part Name for your 2001 Jeep Wrangler TJ
Image
Product
Price
- Quicker Disconnect Sway Bar Links
- Min. Adjusted Length - 8" Max Adjusted Length - 11.625" *See Instructions for further details. Not compatible with aftermarket sway bars. Some vehicles may require extended front brake hoses or other modifications to compensate for additional suspension travel.
- Get up to 30% better articulation on uneven terrain. Quick-release pins make it easy to decouple your sway bar. The adjustable-length design is 100% bolt-on and attaches to your sway bar and axle housing. Made in the USA, JKS Quicker Disconnects are powder-coated and built to last. Sold in pairs. JKS Quicker Disconnect sway bar end links fits various models and lift heights. See list below
- In the box: All Necessary Mounting / Installation Hardware Sway Bar Links
- Product Attributes:
- California Proposition 65: ! Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Minimum Adjusted Length: 8.00
- For Use With Lift Heights: 2.5"-6"
- Installation Time: 1-2
- Horizontal Position: Front
- Installation Difficulty: Moderately Easy
- Is Adjustable: Yes
- Length: 8 To 11-5/8
- Maximum Adjusted Length: 11.625
- Title: Quicker Disconnect Sway Bar Links
- Installation Tools Requirements: 15/16" X 18tpi Tap; Angle Measuring Tool; Grease Gun With Zerk Fitting Coupler; Tie Rod End Separator (recommended); Torque Wrench; Wheel Bearing Grease
-
Features:
- Gain 30 percent more axle articulation by disconnecting your front sway bar
- Dramatically improve off-road performance on stock or modified Jeeps
- Variable length design adapts to your vehicle and future modifications
- Convenient grease fittings ensure easy bushing lubrication for smooth, silent operation
- Stainless tapered mounting posts and self-align bushings allow you to connect or disconnect on unlevel surfaces
- Spherical bushings provide unrestricted 360 degrees of rotation and 11 degrees of misalignment capability
- Get up to 30% better articulation on uneven terrain. Quick-release pins make it easy to decouple your sway bar. The adjustable-length design is 100% bolt-on and attaches to your sway bar and axle housing. Made in the USA, JKS Quicker Disconnects are powder-coated and built to last. Sold in pairs.
Additional Fitment Information:
| Vehicle |
|---|
| 2001 - Jeep Wrangler TJ |
- Adjustable Front Track Bar
- Suggested Starting Length - 32" Min. Adjusted Length - 30.2" Max Adjusted Length - 33.2" *See Instructions for further details. Vehicles with Dana 30 axle, aftermarket diff. cover and less than 3.0 in. lift may require bump stop adjustment to prevent interference. Not compatible with right hand drive vehicles.
- Improve handling on and off road with a JKS adjustable front track bar for the Jeep Wrangler TJ or LJ. Designed for Jeeps with 1-3.5" lift, JKS track bars controls lateral movement of the axle housing. They feature rubber and poly bushings to isolate noise and vibration. CNC bent DOM tubing is powder coated and zinc coated. Vehicles with Dana 30 axle, aftermarket diff. cover and less than 3.0 in. lift may require bump stop adjustment to prevent interference.
- In the box: Bushings Jam Nut Track Bar
- Product Attributes:
- California Proposition 65: ! Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Minimum Adjusted Length: 30.20
- For Use With Lift Heights: 1-3.5"
- Installation Time: 2-3
- Horizontal Position: Front
- Installation Difficulty: Moderate
- Is Adjustable: Yes
- Maximum Adjusted Length: 33.20
- Title: Adjustable Front Track Bar
- Suggested Starting Length: 32.00
-
Features:
- Superior quality replacement for original fixed length panhard rod
- Variable length design properly aligns axle housing with chassis and prevents undue stress on related components
- Fine adjustment threads enable ultra precise axle positioning
- Extremely strong DOM tube construction utilizes OE bends for correct geometry and clearance
- Spherical urethane bushing for unrestricted travel and premium rubber bushing for comfort and quietness
- Zinc plated and powder coated for protection from corrosion and debris
- Improve handling on and off road with a JKS adjustable front track bar for the Jeep Wrangler TJ or LJ. Designed for Jeeps with 1-3.5" lift, JKS track bars controls lateral movement of the axle housing. They feature rubber and poly bushings to isolate noise and vibration. CNC bent DOM tubing is powder coated and zinc coated. Vehicles with Dana 30 axle, aftermarket diff. cover and less than 3.0 in. lift may require bump stop adjustment to prevent interference.
Additional Fitment Information:
| Vehicle |
|---|
| 2001 - Jeep Wrangler TJ |
- Control Arm Kit
- Jack / Jack Stands
- Upgrade your Jeeps weak factory stamped steel control arms for to these high strength lower control arms from Zone Offroad. Along with added strength, they offer caster correction and durable rubber bushings for a long life, improved flex and easy installation. Designed for use with 3-4" lift kits.
- In the box: Bushings Control Arms
- Product Attributes:
- For Use With Lift Heights: 3-4"
- Vertical Position: Lower
- Horizontal Position: Front Or Rear
-
Features:
- Designed for improved strength and axle positioning under your 3-4" lifted Jeep TJ
- 1-3/4" x 1/4" DOM steel constructed, formed for proper fitment and finished in durable textured black powdercoat
- Factory style rubber bushings for long, service free operation
- Improve suspension travel and provide added strength over the factory units with Zone control arms & components for lifted Trucks & Jeeps. Shop our upper control arms (UCA) and 4-Link control arms designed specifically to be paired with a Zone suspension lift kit. All Zone control arms feature replaceable high-quality greaseable ball joints and urethane bushings. All control arms are an easy bolt on installation that will prepare you for the next adventure!
Additional Fitment Information:
| Vehicle |
|---|
| 2001 - Jeep Wrangler TJ |
- Rear Track Bar Relocation Bracket
- This bracket is made for slip yoke eliminator (SYE) kits and dual cardan rear driveshafts, and is adjusted to provide the axle rotation necessary for proper driveshaft alignment when using a double cardan setup on TJ's with 4 - 4.5" of lift.
- In the box: All Necessary Mounting / Installation Hardware All Necessary Mounting / Relocation Brackets
- Product Attributes:
- For Use With Lift Heights: 4-4.5"
- Horizontal Position: Rear
-
Features:
- This bracket is made for TJ's with 4 - 4.5" of lift using slip yoke eliminator (SYE) kits and dual cardan rear driveshafts.
- This track bar bracket is adjusted for the axle rotation necessary for proper driveshaft alignment when using a double cardan setup.
- Properly align your lifted truck with Zone Offroad adjustable track bars and track bar relocation drop brackets. Fix the dreaded death wobble by correcting your steering geometry with a Zone track bar or bracket kit. Easy to install and affordable solutions to correct lifted suspension systems.
Additional Fitment Information:
| Vehicle |
|---|
| 2001 - Jeep Wrangler TJ |
- Rear Adjustable Sway Bar Links
- Min. Adjusted Length - 8.75" Max Adjusted Length - 15" *See Instructions for further details. Requires Front 2.5" to 6" of Lift. Not compatible with aftermarket swaybars. Although rare, some TJs with 4-6" of lift may require additional part # OGS915 for proper sway bar operating angle.
- Adjustable rear sway bar end links for Jeep Wrangler TJ and LJ with 2.5" to 6" lift. Highly responsive bushings reduce deflection for improved handling. Adjustable length allows you to set sway bar operating angle. Zinc plated for corrosion resistance. Not compatible with aftermarket sway bars. Sold in pairs.
- In the box: All Necessary Mounting / Installation Hardware Sway Bar Links
- Product Attributes:
- California Proposition 65: ! Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Minimum Adjusted Length: 8.75
- For Use With Lift Heights: 2.5"-6"
- Installation Time: 1-3
- Horizontal Position: Front
- Installation Difficulty: Moderate
- Is Adjustable: Yes
- Length: 7 To 10-1/2
- Maximum Adjusted Length: 15.00
- Title: Rear Adjustable Sway Bar Links
-
Features:
- Correct sway bar geometry on lifted vehicles and improve suspension performance on- and off-road
- Highly responsive bushings reduce loss of motion between chassis and suspension for improved handling
- Prevents sway bar from contacting axle housing at full suspension droop
- Variable length design allows you to accurately set sway bar operating angle
- Special zinc plating applied for corrosion resistance and long lasting protection
- Adjustable rear sway bar end links for Jeep Wrangler TJ and LJ with 2.5" to 6" lift. Highly responsive bushings reduce deflection for improved handling. Adjustable length allows you to set sway bar operating angle. Zinc plated for corrosion resistance. Not compatible with aftermarket sway bars. Sold in pairs.
Additional Fitment Information:
| Vehicle |
|---|
| 2001 - Jeep Wrangler TJ |
- Quicker Disconnect Sway Bar Links
- Some vehicles may require extended front brake hoses or other modifications to compensate for additional suspension travel. Not compatible with aftermarket sway bars.
- Get up to 30% better articulation on uneven terrain. Quick-release pins make it easy to decouple your sway bar. The adjustable-length design is 100% bolt-on and attaches to your sway bar and axle housing. Made in the USA, JKS Quicker Disconnects are powder-coated and built to last. Sold in pairs.
- In the box: All Necessary Mounting / Installation Hardware Sway Bar Links
- Product Attributes:
- California Proposition 65: ! Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- For Use With Lift Heights: 0-4"
- Installation Time: 1-2
- Horizontal Position: Front
- Installation Difficulty: Moderate
- Is Adjustable: Yes
- Length: 6-5/8 To 9-3/8
- Title: Quicker Disconnect Sway Bar Links
-
Features:
- Stainless tapered mounting posts and self-align bushings allow you to connect or disconnect on unlevel surfaces
- Spherical bushings provide unrestricted 360 degrees of rotation and 11 degrees of misalignment capability
- Gain 30 percent more axle articulation by disconnecting your front sway bar
- Dramatically improve off-road performance on stock or modified Jeeps
- Variable length design adapts to your vehicle and future modifications
- Convenient grease fittings ensure easy bushing lubrication for smooth, silent operation
- Get up to 30% better articulation on uneven terrain. Quick-release pins make it easy to decouple your sway bar. The adjustable-length design is 100% bolt-on and attaches to your sway bar and axle housing. Made in the USA, JKS Quicker Disconnects are powder-coated and built to last. Sold in pairs.
Additional Fitment Information:
| Vehicle |
|---|
| 2001 - Jeep Wrangler TJ |
- Adjustable Front Track Bar
- Suggested Starting Length - 33" Min. Adjusted Length - 32.91" Max Adjusted Length - 35.91" *See Instructions for further details. Vehicles with Dana 30 axle, aftermarket diff. cover and less than 3.0 in. lift may require bump stop adjustment to prevent interference. Not compatible with right hand drive vehicles.
- Correct front axle centering on your lifted Jeep Wrangler TJ or LJ by installing a JKS Adjustable Track Bar. For use with Jeeps with a 4" plus lift, JKS front track bars feature rubber and poly bushings to isolate noise and vibration. CNC bent DOM tubing is powder coated and zinc coated. Vehicles with Dana 30 axle, aftermarket diff. cover and less than 3.0 in. lift may require bump stop adjustment to prevent interference.
- In the box: Bushings Jam Nut Track Bar
- Product Attributes:
- California Proposition 65: ! Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Minimum Adjusted Length: 32.91
- For Use With Lift Heights: Over 4"
- Installation Time: 2-3
- Horizontal Position: Front
- Installation Difficulty: Moderate
- Is Adjustable: Yes
- Maximum Adjusted Length: 35.91
- Title: Adjustable Front Track Bar
- Suggested Starting Length: 33.00
-
Features:
- Fits vehicles with more than 4" Lift
- Superior quality replacement for original fixed length panhard rod
- Variable length design properly aligns axle housing with chassis and prevents undue stress on related components
- Fine adjustment threads enable ultra precise axle positioning
- Extremely strong DOM tube construction utilizes OE bends for correct geometry and clearance
- Spherical urethane bushing for unrestricted travel and premium rubber bushing for comfort and quietness
- Zinc plated and powder coated for protection from corrosion and debris
- Correct front axle centering on your lifted Jeep Wrangler TJ or LJ by installing a JKS Adjustable Track Bar. For use with Jeeps with a 4" plus lift, JKS front track bars feature rubber and poly bushings to isolate noise and vibration. CNC bent DOM tubing is powder coated and zinc coated. Vehicles with Dana 30 axle, aftermarket diff. cover and less than 3.0 in. lift may require bump stop adjustment to prevent interference.
Additional Fitment Information:
| Vehicle |
|---|
| 2001 - Jeep Wrangler TJ |
Showing 1 - 7 of 7 products
Loading...