2005 Mitsubishi Lancer Suspension Parts
Choose your Part Name for your 2005 Mitsubishi Lancer
Alignment Cam Bolt Kit
Alignment Camber Kit
Jounce Bumper
Lateral Arm
Suspension Ball Joint
Suspension Control Arm
Suspension Control Arm Bushing
Suspension Control Arm and Ball Joint Assembly
Suspension Shock Absorber
Suspension Shock Absorber Bellows
Suspension Shock Absorber Mount
Suspension Shock Absorber Mounting Kit
Suspension Stabilizer Bar Bushing
Suspension Stabilizer Bar Link
Suspension Stabilizer Bar Link Bushing
Suspension Stabilizer Bar Link Kit
Suspension Strut
Suspension Strut Bellows
Suspension Strut Bumper
Suspension Strut Hardware Kit
Suspension Strut Mount
Suspension Strut and Coil Spring Assembly
Suspension Trailing Arm Bushing
Image
Product
Price
- Jounce Bumper and Bellows
- Strut Boots
- Product Attributes:
- Feature and Benefit 4: Protects The Upper Seal And Bushing
- Feature and Benefit 1: Superior Quality Boot Helps Protect The Strut Shaft From Leak-causing Dirt And Debris
- Feature and Benefit 3: Built With Design And Quality That Matches Or Exceeds Oe
- Feature and Benefit 2: Poly Foam Bumper Prevents The Strut From Bottoming Out
- KYB Strut Boot Kits keep your struts protected from dirt, dust, sand, salt and other road debris. These harmful elements cause abrasive wear to the polished shaft, upper seal and bushing. KYB Strut Boot Kits prevent these contaminants from entering the strut by covering the entire strut shaft in a highly durable plastic bellows. This can easily extend the life of the strut. The KYB Strut Boot Kit includes a poly foam travel-limiting bumper. Its designed to protect the strut from bottoming out and protects other components from extreme movement damage.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
143060, 63622
Additional Fitment Information:
| Vehicle | Position | Sub Model |
|---|---|---|
| 2005 - Mitsubishi Lancer | Front | Evolution RS |
- Ball Joint
- Includes Powdered-Metal Gusher Bearing To Allow Grease To Penetrate Bearing Surfaces Fits OE Arm and Aftermarket Arms with Maximum Press-Fit Diameter of 1.571 (in) Original Equipment (OE) Presses In From Below Requires Replacement Joint To Be Pressed In From Above Arm
- MOOG K500063 Ball Joint
- Product Attributes:
- Suspension Grade Type: Standard
- Mounting Hole Quantity: 0
- Mounting Type: Press-in
-
Features:
- PROBLEM SOLVER® GUSHER BEARING -- Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
- STRONG AND DURABLE -- Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
- GREASEABLE SOCKET -- Reduces corrosion and wear by allowing new lubricant to flush contaminants
- ABSORBS IMPACT -- Belleville preload washer helps keep the bearing package tight as bearings wear
- RESTORES LIKE-NEW STEERING -- Patented pressed-in cover plate seals out debris and minimizes looseness, reducing bearing wear and promoting longer life
- EASY TO INSTALL -- Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
- COMPREHENSIVE COVERAGE -- Available for foreign and domestic nameplates
- Backed by superior materials and rigorous testing, MOOG® ball joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
104500063, 260-1724, 45D2401, 46D2401A, 505-1417, 505-1417B, 5105040AA, 5105040AB, 5105040AC, 5105040AD, 5105040AE, 5105040AF, 5105040AG, 5105040AH, 5105040AI, 5105041AA, 5105041AB, 5105041AC...VIEW MORE
Additional Fitment Information:
| Vehicle | Position | Aspiration |
|---|---|---|
| 2005 - Mitsubishi Lancer | Front Lower | Naturally Aspirated |
- Ball Joint
- Fits OE Arm and Aftermarket Arms with Maximum Press-Fit Diameter of 1.571 (in)
- MOOG K500063 Ball Joint
- Product Attributes:
- Suspension Grade Type: Standard
- Mounting Hole Quantity: 0
- Mounting Type: Press-in
-
Features:
- PROBLEM SOLVER® GUSHER BEARING -- Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
- STRONG AND DURABLE -- Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
- GREASEABLE SOCKET -- Reduces corrosion and wear by allowing new lubricant to flush contaminants
- ABSORBS IMPACT -- Belleville preload washer helps keep the bearing package tight as bearings wear
- RESTORES LIKE-NEW STEERING -- Patented pressed-in cover plate seals out debris and minimizes looseness, reducing bearing wear and promoting longer life
- EASY TO INSTALL -- Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
- COMPREHENSIVE COVERAGE -- Available for foreign and domestic nameplates
- Backed by superior materials and rigorous testing, MOOG® ball joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
Additional Fitment Information:
| Vehicle | Position | Aspiration |
|---|---|---|
| 2005 - Mitsubishi Lancer | Front Lower | Naturally Aspirated |
- Strut-Mate Suspension Strut Bellows
- Monroe Shocks & Struts Strut-Mate 63631 Suspension Strut Bellows
- Monroe Strut-Mate Strut Boot Kit
- Heavy-duty construction and unique design features make the Monroe® Strut-Mate® boot kit the quality choice for maximum rod protection and improved strut life. Damaged boots may not protect the rod finish. A pitted piston rod can lead to premature strut failure. Deteriorated OE bumpers may not offer adequate protection from severe suspension movement, leading to premature strut failure.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
143057, 143059, 5171132AB, 5171132AC, SB103, SB129
Additional Fitment Information:
| Vehicle | Position | Sub Model |
|---|---|---|
| 2005 - Mitsubishi Lancer | Front | OZ Rally |
- Suspension Control Arm And Ball Joint Assembly
- Product Attributes:
- Ball Joint Included:
- Oui
- S?¡
- Yes
- Control Arm Type: Casting/forged
- Grade Type:
- Reemplazo Est?índar
- Standard
- Mounting Hardware Included:
- Oui
- S?¡
- Yes
- Package Contents: Control Arm And Ball Joint Assembly
- Mounting Hole Diameter: 12.3
- Mounting Hole Quantity:
- 1
- 1 Ensamble De Manguera Del Calentador
- Control Arm Material:
- Acero
- Steel
- Ball Joint Stud Type:
- Pinch
- Pinchar
- Control Arm Maximum Length: 237
- Grease Fitting Included:
- No
- Non
- Tipo de brazo de control: Fundici??n/forjado
- Adjustable:
- No
- Non
- Pre-Greased:
- Oui
- S?¡
- Yes
- Ball Joint Thread Diameter: 14
- Contenidos del paquete: Conjunto De Articulaci??n De R??tula Y Brazo De Control
- Control Arm Color:
- Black
- Negro
- Noir
- Control Arm Maximum Width: 288.5
- Articulaci├│n de r├│tula instalada: S?¡
- Bushing Material:
- ?ëlastom?¿re
- Caucho
- Rubber
- Ball Joint Installed:
- Oui
- Yes
- Ball Joint Included:
-
Features:
- Trustworthy replacement - this control arm and ball joint assembly directly replaces the original assembly on specific vehicle applications
- Complete repair - each assembly includes pre-installed ball joint and bushings, saving time and labor
- Quality engineering - underwent industry-leading testing to ensure a smooth, stable and safe ride
- Durably designed - additional coatings offer long-lasting rust and corrosion resistance
- This suspension control arm and ball joint assembly is a direct replacement for the original equipment on specific vehicle applications. An industry-leading evaluation process ensures a smooth ride, directional stability and predictable dynamics.
This Part Fits the Following OEM/Substitute Numbers:
102-6328, 1515002, 2605742, 4013A256, 4013A274, 4013A404, 4013A462, 507-1454, 5CB80023, 623.46007, CA581B, CAK620345, CB67074, CB67074PR, CB80023, CK620345, CMS80122, FA4637...VIEW MORE
Additional Fitment Information:
| Vehicle | Position | Aspiration |
|---|---|---|
| 2005 - Mitsubishi Lancer | Front Right Lower | Naturally Aspirated |
- Suspension Lateral Arm
- Product Attributes:
- Ball Joint Included:
- No
- Non
- Control Arm Type: Tubular
- Grade Type: Regular
- Mounting Hardware Included:
- No
- Non
- Package Contents: 1 Suspension Control Arm
- Bushing Color:
- Black
- Negro
- Noir
- Mounting Hole Diameter: 12.4
- Pre Greased:
- No
- Non
- Length: 166
- Tipo de extremo 1: Buje
- End 1 Type: Bushing
- Attachment Type:
- Soldadas
- Welded
- Ball Joint Stud Type:
- Roscado
- Threaded
- Grease Fitting Included:
- No
- Non
- Mount Stud Quantity: 0
- Tipo de brazo de control: Tubular
- End 2 Type:
- Mounting Hole
- Orificio De Montaje
- Adjustable:
- No
- Non
- Contenidos del paquete: 1 Brazo De Control De La Suspensi??n
- Engrasado previamente: No
- Articulaci├│n de r├│tula instalada: No
- Bushing Material:
- ?ëlastom?¿re
- Caucho
- Rubber
- Ball Joint Installed:
- No
- Non
- Ball Joint Included:
-
Features:
- Direct replacement - fits and performs like the original equipment on specific vehicles
- Reliable fit - precision-engineered to match the design and dimensions of original components
- Durable construction - manufactured to strict standards using sturdy, safe materials
- Rigorously tested - thorough quality control measures ensure longevity
- This lateral arm is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.
Additional Fitment Information:
| Vehicle | Position | Sub Model |
|---|---|---|
| 2005 - Mitsubishi Lancer | Rear Right Lower Forward | Ralliart |
- Suspension Lateral Arm
- Product Attributes:
- Ball Joint Included:
- No
- Non
- Control Arm Type: Tubular
- Grade Type: Regular
- Mounting Hardware Included:
- No
- Non
- Package Contents: 1 Suspension Control Arm
- Bushing Color:
- Black
- Negro
- Noir
- Mounting Hole Diameter: 12.4
- Pre Greased:
- No
- Non
- Length: 166
- Tipo de extremo 1: Buje
- End 1 Type: Bushing
- Attachment Type:
- Soldadas
- Welded
- Ball Joint Stud Type:
- Roscado
- Threaded
- Grease Fitting Included:
- No
- Non
- Mount Stud Quantity: 0
- Tipo de brazo de control: Tubular
- End 2 Type:
- Mounting Hole
- Orificio De Montaje
- Adjustable:
- No
- Non
- Contenidos del paquete: 1 Brazo De Control De La Suspensi??n
- Engrasado previamente: No
- Articulaci├│n de r├│tula instalada: No
- Bushing Material:
- ?ëlastom?¿re
- Caucho
- Rubber
- Ball Joint Installed:
- No
- Non
- Ball Joint Included:
-
Features:
- Direct replacement - fits and performs like the original equipment on specific vehicles
- Reliable fit - precision-engineered to match the design and dimensions of original components
- Durable construction - manufactured to strict standards using sturdy, safe materials
- Rigorously tested - thorough quality control measures ensure longevity
- This lateral arm is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.
This Part Fits the Following OEM/Substitute Numbers:
1506081, 1CB25122, 1CB80189, 2606515, 502-1275, 5105270AA, 5105270AB, 5105270AC, 5105270AD, 800-596468, CA1198, CAK641226, CB25122, CMS251006, CMS251137, CMS801136, GS251006, JTC2328...VIEW MORE
Additional Fitment Information:
| Vehicle | Position | Sub Model |
|---|---|---|
| 2005 - Mitsubishi Lancer | Rear Left Lower Forward | Ralliart |
- Suspension Control Arm Bushing
- Product Attributes:
- Wall Thickness: 23.8
- Grade Type: Regular
- Mounting Hardware Included:
- No
- Non
- Package Contents: 1 Bushing
- Bushing 1 Width: 66.2 Mm
- Color Code:
- Grey
- Gris
- Mounting Hole Diameter: 18.4
- Length: 54
- Item Grade: Regular
- Width: 60
- Height: 66.2
- Bracket Included:
- No
- Non
- Inside Diameter: 14.2
- Outside Diameter: 25
- Distance Between Mounting Holes: 62.8
- Dust Boot Included:
- No
- Non
- Contenidos del paquete: 1 Buje
- Mounting Type:
- Buje
- Bushing
- Bushing Material:
- Acero, Goma
- Rubber
- Steel
-
Features:
- Direct replacement - fits and performs like the original equipment bushing on specific vehicles
- Reliable fit - precision-engineered to match the design and dimensions of original components
- Durable construction - manufactured to strict standards using sturdy, safe materials
- Rigorously tested - thorough quality control measures ensure longevity
- This suspension control arm bushing is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
BC82090PR, JBU182, K200254, K200800, K201357, MR403441, MS25441, MS80434, TD1253W, TD1621W
Additional Fitment Information:
| Vehicle | Position | Drive Type |
|---|---|---|
| 2005 - Mitsubishi Lancer | Front Lower Rearward | FWD |
- Stabilizer Bar Link Kit
- Product Attributes:
- End 2 Type: Male Threaded
- Grade Type: Regular
- Bushing Inside Diameter: 10
- Bearing Material: Polymer
- End 1 Type: Male Threaded
- Link Material: Steel
- Weight: 0.59 Lb
- Bushing Outside Diameter: 26
- Bolt Thread Size: 10
-
Features:
- Direct replacement - fits and performs like the original equipment on specific vehicles
- Reliable fit - precision-engineered to match the design and dimensions of original components
- Durable construction - manufactured to strict standards using sturdy, safe materials
- Rigorously tested - thorough quality control measures ensure longevity
- This suspension stabilizer bar link kit is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
1015000, 2115006, 4056A037, 606.46026, JTS7638, K80374, MK80374, SL611, TC2616
Additional Fitment Information:
| Vehicle | Position | Drive Type |
|---|---|---|
| 2005 - Mitsubishi Lancer | Rear | FWD |
- Camber Adjusting Kit
- From Minus 1-3/4 to Plus 1-3/4 Degrees of Change Single Offset Adjuster with 14 (mm) Bolts
- MOOG K90474 Camber Adjusting Kit
-
Features:
- Can bring vehicles back to factory specification
- Can solve excessive tire wear and steering issues
- Shims and bushings provide precise camber, caster and toe adjustments
- Incorporates proven design and engineering features
- Cam bolts and adjustable ball joints provide alignment for non-adjustable vehicles
- By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry's Problem Solver.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
13322A, 264-3642, 41214, 45K18036, 616-1030, 616-1036, 787504, AA3642, AK90399, K90474, MS50202, MS60005, VV13322A
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2005 - Mitsubishi Lancer | Front |
Showing 1 - 10 of 148 products
Loading...