2008 Ford Expedition Suspension Parts
Choose your Part Name for your 2008 Ford Expedition
Active Suspension Control Module
Air Spring to Coil Spring Conversion Kit
Air Suspension Compressor
Air Suspension Helper Spring
Air Suspension Spring
Alignment Caster / Camber Kit
Coil Spring Insulator
Suspension Ball Joint
Suspension Camber Strut
Suspension Control Arm
Suspension Control Arm and Ball Joint Assembly
Suspension Leveling Kit
Suspension Lift Kit
Suspension Shock Absorber
Suspension Stabilizer Bar Assembly
Suspension Stabilizer Bar Bracket Nut
Suspension Stabilizer Bar Bushing
Suspension Stabilizer Bar Link
Suspension Stabilizer Bar Link Kit
Suspension Strut Bellows
Suspension Strut Mount
Suspension Strut Mount Kit
Suspension Strut and Coil Spring Assembly
Image
Product
Price
- Ball Joint
- Includes Powdered-Metal Gusher Bearing To Allow Grease To Penetrate Bearing Surfaces New Pre-Installed Integral Dust Boot Allows For Ease Of Installation Both New and Original Designs can be Installed on Vehicle
- MOOG K500008 Ball Joint
- Product Attributes:
- Cotter Pin Hole: Yes
- Adjustable: No
- Suspension Grade Type: Standard
- Maximum Outside Diameter: 2.500
- Mounting Hole Quantity: 0
- Castle Nut Included: Yes
- Mounting Type: Press-in
- Greaseable: Yes
-
Features:
- PROBLEM SOLVER® GUSHER BEARING -- Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
- STRONG AND DURABLE -- Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
- GREASEABLE SOCKET -- Reduces corrosion and wear by allowing new lubricant to flush contaminants
- KEEPS DIRT AND WATER OUT -- Pre-installed dust boot shields socket components from wear-causing contaminants
- ABSORBS IMPACT -- Belleville preload washer helps keep the bearing package tight as bearings wear
- EASY TO INSTALL -- Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
- COMPREHENSIVE COVERAGE -- Available for foreign and domestic nameplates
- Backed by superior materials and rigorous testing, MOOG® ball joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
104500008, 2601745, 45D2430, 46D2430A, 505-1434, 505-1434B, 535-588, 610.65006, 7L1Z3050B, 9L3Z3050A, BJ85225, FA2384, FA2384E, JBJ1041, K500008, MK500008
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2008 - Ford Expedition | Front Lower |
- Ball Joint
- Both New and Original Designs can be Installed on Vehicle
- MOOG K500008 Ball Joint
- Product Attributes:
- Cotter Pin Hole: Yes
- Adjustable: No
- Suspension Grade Type: Standard
- Maximum Outside Diameter: 2.500
- Mounting Hole Quantity: 0
- Castle Nut Included: Yes
- Mounting Type: Press-in
- Greaseable: Yes
-
Features:
- PROBLEM SOLVER® GUSHER BEARING -- Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
- STRONG AND DURABLE -- Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
- GREASEABLE SOCKET -- Reduces corrosion and wear by allowing new lubricant to flush contaminants
- KEEPS DIRT AND WATER OUT -- Pre-installed dust boot shields socket components from wear-causing contaminants
- ABSORBS IMPACT -- Belleville preload washer helps keep the bearing package tight as bearings wear
- EASY TO INSTALL -- Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
- COMPREHENSIVE COVERAGE -- Available for foreign and domestic nameplates
- Backed by superior materials and rigorous testing, MOOG® ball joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2008 - Ford Expedition | Front Lower |
- Coil Capacity Increase 15-30 Percent; Fill Out Coil SumoSprings Inspection before Ordering; Do Not Exceed GVWR; Inner Wall Height 0.94 in.
- Coil SumoSprings; Coil Capacity Increase 15-30 Percent; Fill Out Coil SumoSprings Inspection before Ordering; Do Not Exceed GVWR; Inner Wall Height 0.94 in.;
- Coil SumoSprings
-
Features:
- Sold as a pair left and right
- Requires no maintenance
- Proudly made in the U.S.A.
- Fit Both Front And Rear Coil Springs
- Coil SumoSprings Simply Slide Between The Turns Of Coil Springs
- Enhance Front Suspension When Fitting Snow Plow/Winch/Bumper
- Enhance Rear Suspension When Adding Tow Hitch
- Reduces Side To Side Body Roll And Front End Dip
- Produced From SumoSprings Closed Cell Microcellular Urethane
- Progressive Spring Rate
- Coil Capacity Increased By 15 To 30 Percent
- Typical Installation Completed In Less Than 30 Minutes
- Never Load Any Vehicle Beyond The Manufacturers GVWR
- Coil SumoSprings(R) improve the load leveling ability of original equipment front and rear coil springs. Manufactured from micro-cellular urethane, the material's progressive spring rate creates a cushion effect, enhancing capacity and ride comfort. They install by simply being slid between the turns of the coil spring.
Additional Fitment Information:
| Vehicle | Position | Sub Model |
|---|---|---|
| 2008 - Ford Expedition | Front | Max Limited |
- Coil Capacity Increase 15-30 Percent; Fill Out Coil SumoSprings Inspection before Ordering; Do Not Exceed GVWR; Inner Wall Height 1.68 in.
- Coil SumoSprings; Coil Capacity Increase 15-30 Percent; Fill Out Coil SumoSprings Inspection before Ordering; Do Not Exceed GVWR; Inner Wall Height 1.68 in.;
- Coil SumoSprings
-
Features:
- Sold as a pair left and right
- Requires no maintenance
- Proudly made in the U.S.A.
- Fit Both Front And Rear Coil Springs
- Coil SumoSprings Simply Slide Between The Turns Of Coil Springs
- Enhance Front Suspension When Fitting Snow Plow/Winch/Bumper
- Enhance Rear Suspension When Adding Tow Hitch
- Reduces Side To Side Body Roll And Front End Dip
- Produced From SumoSprings Closed Cell Microcellular Urethane
- Progressive Spring Rate
- Coil Capacity Increased By 15 To 30 Percent
- Typical Installation Completed In Less Than 30 Minutes
- Never Load Any Vehicle Beyond The Manufacturers GVWR
- Coil SumoSprings(R) improve the load leveling ability of original equipment front and rear coil springs. Manufactured from micro-cellular urethane, the material's progressive spring rate creates a cushion effect, enhancing capacity and ride comfort. They install by simply being slid between the turns of the coil spring.
Additional Fitment Information:
| Vehicle | Sub Model | Drive Type |
|---|---|---|
| 2008 - Ford Expedition | EL King Ranch | 4WD |
- Coil Capacity Increase 15-30 Percent; Fill Out Inspection before Ordering; Do Not Exceed GVWR; Inner Wall Height 0.94 in.
- Coil SumoSprings; Coil Capacity Increase 15-30 Percent; Fill Out Coil SumoSprings Inspection before Ordering; Do Not Exceed GVWR; Inner Wall Height 0.94 in.;
- Coil SumoSprings
-
Features:
- Sold as a pair left and right
- Requires no maintenance
- Proudly made in the U.S.A.
- Fit Both Front And Rear Coil Springs
- Coil SumoSprings Simply Slide Between The Turns Of Coil Springs
- Enhance Front Suspension When Fitting Snow Plow/Winch/Bumper
- Enhance Rear Suspension When Adding Tow Hitch
- Reduces Side To Side Body Roll And Front End Dip
- Produced From SumoSprings Closed Cell Microcellular Urethane
- Progressive Spring Rate
- Coil Capacity Increased By 15 To 30 Percent
- Typical Installation Completed In Less Than 30 Minutes
- Never Load Any Vehicle Beyond The Manufacturers GVWR
- Coil SumoSprings(R) improve the load leveling ability of original equipment front and rear coil springs. Manufactured from micro-cellular urethane, the material's progressive spring rate creates a cushion effect, enhancing capacity and ride comfort. They install by simply being slid between the turns of the coil spring.
Additional Fitment Information:
| Vehicle | Position | Sub Model |
|---|---|---|
| 2008 - Ford Expedition | Front | Max Limited |
- Coil Capacity Increase 15-30 Percent; Fill Out Inspection before Ordering; Do Not Exceed GVWR; Inner Wall Height 1.68 in.
- Coil SumoSprings; Coil Capacity Increase 15-30 Percent; Fill Out Coil SumoSprings Inspection before Ordering; Do Not Exceed GVWR; Inner Wall Height 1.68 in.;
- Coil SumoSprings
-
Features:
- Sold as a pair left and right
- Requires no maintenance
- Proudly made in the U.S.A.
- Fit Both Front And Rear Coil Springs
- Coil SumoSprings Simply Slide Between The Turns Of Coil Springs
- Enhance Front Suspension When Fitting Snow Plow/Winch/Bumper
- Enhance Rear Suspension When Adding Tow Hitch
- Reduces Side To Side Body Roll And Front End Dip
- Produced From SumoSprings Closed Cell Microcellular Urethane
- Progressive Spring Rate
- Coil Capacity Increased By 15 To 30 Percent
- Typical Installation Completed In Less Than 30 Minutes
- Never Load Any Vehicle Beyond The Manufacturers GVWR
- Coil SumoSprings(R) improve the load leveling ability of original equipment front and rear coil springs. Manufactured from micro-cellular urethane, the material's progressive spring rate creates a cushion effect, enhancing capacity and ride comfort. They install by simply being slid between the turns of the coil spring.
Additional Fitment Information:
| Vehicle | Position | Sub Model | Drive Type |
|---|---|---|---|
| 2008 - Ford Expedition | Front | EL King Ranch | 4WD |
- Suspension Ball Joint
- Product Attributes:
- Housing Press Fit Diameter: 44.62 Mm; 42.6 Mm
- Mounting Hardware Included: Yes
- Package Contents: 1 Ball Joint; 1 Nut; 1 Snap Ring; 1 Zerk Fitting; 1 Cotter Pin
- Mounting Hole Quantity: 0
- Castle Nut Included: Yes
- Greaseable: Yes
- Cotter Pin Hole: Yes
- Dust Boot Material: Rubber
- Attachment Type: Taper
- Adjustable: No
- Suspension Grade Type: Standard
- Bolts/Studs Included: Yes
- Bearing Material: Metal
- Mounting Type: Press
-
Features:
- Direct replacement - fits and performs like the original equipment on specific vehicles
- Reliable fit - precision-engineered to match the design and dimensions of original components
- Durable construction - manufactured to strict standards using sturdy, safe materials
- Rigorously tested - thorough quality control measures ensure longevity
- This suspension ball joint is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
1008017, 45D2430, 610.65006, 7L1Z3050B, FA2384, GK500008, JBJ1041, K500008, MCSOE87, MK500008, TC5489
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2008 - Ford Expedition | Front Lower |
- B6 4600-Shock Absorber
- 46mm Monotube Shock Absorber
- B6 4600
- Product Attributes:
- California Proposition 65: Warning: Cancer & Reproductive Harm - Www.p65warnings.ca.gov
- Internal Design: Monotube
- Upper Mount Type: Stem
- Reservoir: No
- WARNING CA Proposition 65: Yes
- Spring Seat Included: No - Reuse Oem
- WARNING CA Proposition 65 Message: Warning: Cancer & Reproductive Harm - Www.p65warnings.ca.gov
- Reservoir Included: No
- Boot Included: No
- Lower Mount Type: Eye 20.3mm
- Adjustable Damping: Non-adjustable
- Adjustable Length: No
-
Features:
- Bilstein 4600 Series
- Monotube Gas Pressure Construction
- Improved Ride And Handling
- Added Traction And Enhanced Stability
- Increased Performance Even When Towing Heavy Loads
- Vehicle Specific Ride Tuning
- Bilstein B6 4600 shock absorbers are designed as a direct fit upgrade to OE shock absorbers on stock height light trucks and SUV's. These shock absorbers feature a monotube design which provides consistent fade free performance. B6 4600 shock absorbers utilize a unique, velocity sensitive, digressive piston which reacts to changing road conditions. All B6 4600 shock absorbers are tuned for each specific application to ensure optimal performance is achieved. B6 4600 shock absorbers offer a significant improvement in ride quality, handling, and comfort.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
24197717, 7L1Z 18124-A, 7L1Z 18124-B, 7L1Z 18124-C, 7L1Z 18124-CA, 7L1Z 18124-CB, 7L1Z 18124-CC, 7L1Z 18124-CD, 7L1Z 18124-CM, 7L1Z 18124-D, 8L1Z 18124-CB, 8L1Z 18124-CD, 8L1Z 18124-CM, 8L1Z 18124-DF, 8L1Z 18124-DH, 8L1Z 18124-DP, 8L1Z 18124-DR, AL1Z 18124-A...VIEW MORE
Additional Fitment Information:
| Vehicle | Position | Sub Model |
|---|---|---|
| 2008 - Ford Expedition | Front | EL Eddie Bauer |
- Adjustable; 2-3 in. Lift; 2.3 Hours Install Time; On Vehicle Adjustment
- LIFTmachine; Front; Adjustable; 2-3 in. Lift; 2.3 Hours Install Time; On Vehicle Adjustment;
- LIFTmachine
- Product Attributes:
- Lift/Drop Height: 2 In. To 3 In.
-
Features:
- High Strength Steel Components and 10.9 Hardware
- Does Not Require Removal Of OEM Components
- E-coated For Lasting Durable Finish
- Retains Original One Ride Quality And Comfort
- Allows Up To 35 inch Wheel
- Lifetime Warranty
- Against Manufacturer Defects to Original Purchaser
- LIFTmachine is the product that launched the adjustable lift kit revolution! While our competitors provide a non-adjustable solution, LIFTmachine is easily installed in the most compact position possible, then simply adjusted to your liking all the way to 3.0 in. (varying by make and model). Because LIFTmachine is installed on the top of the strut assembly, there is no time-consuming strut disassembly, and no ride-compromising spring preload associated with other products on the market. LIFTmachine adjustable front lift and leveling kits are available for a wide range of late model pickups and SUVs equipped with strut-type front suspensions.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2008 - Ford Expedition | Front |
- Strut Mount with Upper Spring Seat
- (Excludes Air Suspension )
- Mount Components
- Product Attributes:
- Feature and Benefit 5: Matched Grade Studs And Nuts
- Feature and Benefit 4: Mount Bearings Provide Smoother Steering And Help Retain Front End Alignment
- Feature and Benefit 1: The Highest Quality Replacement Strut Mount Available
- Feature and Benefit 3: Superior Rubber Reduces Noise, Vibration And Harshness
- Feature and Benefit 2: Optimizes Suspension Performance By Offering Original Equipment Quality Replacement Components Designed For Each Application
- KYB Strut Mounts eliminate the vibration and noise caused by old, hardened vibration insulators. They optimize suspension performance by offering OE quality replacement components designed for each application. KYB Strut Mounts cushion the impacts from road bumps to reduce the jarring effect, noise and vibration that old mounts transmit into the vehicle. Front bearing plates are the steering pivots and support vehicle weight. They are critical to steering performance and wheel alignment. KYB Strut Mounts and bearing plates have a reputation for providing the highest quality in the industry.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
Additional Fitment Information:
| Vehicle | Position | Drive Type |
|---|---|---|
| 2008 - Ford Expedition | Front | 4WD |
Showing 1 - 10 of 74 products
Loading...