2011 Nissan Armada Suspension Parts
Choose your Part Name for your 2011 Nissan Armada
Air Suspension Compressor
Air Suspension Compressor Kit
Alignment Caster / Camber Kit
Shock Absorber
Strut Bushing
Suspension Ball Joint
Suspension Control Arm
Suspension Control Arm Bolt
Suspension Control Arm Bushing
Suspension Control Arm and Ball Joint Assembly
Suspension Leveling Kit
Suspension Ride Height Sensor
Suspension Rubber Helper Spring Kit
Suspension Shock Absorber
Suspension Shock Absorber / Strut Mount Bushing
Suspension Stabilizer Bar Bushing
Suspension Stabilizer Bar Link
Suspension Stabilizer Bar Link Kit
Suspension Stabilizer Bar Link Nut
Suspension Strut Assembly
Suspension Strut Bellows
Suspension Strut Mount
Suspension Strut and Coil Spring Assembly
Image
Product
Price
- Ball Joint
- Both New and Original Designs can be Installed on Vehicle
- MOOG K80647 Ball Joint
- Product Attributes:
- Adjustable: No
- Maximum Outside Diameter: 2.380
- Mounting Hole Quantity: 0
- Castle Nut Included: No
- Mounting Type: Press-in
- Greaseable: Yes
-
Features:
- PROBLEM SOLVER® GUSHER BEARING -- Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
- STRONG AND DURABLE -- Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
- GREASEABLE SOCKET -- Reduces corrosion and wear by allowing new lubricant to flush contaminants
- KEEPS DIRT AND WATER OUT -- Pre-installed dust boot shields socket components from wear-causing contaminants
- ABSORBS IMPACT -- Belleville preload washer helps keep the bearing package tight as bearings wear
- EASY TO INSTALL -- Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
- COMPREHENSIVE COVERAGE -- Available for foreign and domestic nameplates
- Backed by superior materials and rigorous testing, MOOG® ball joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2011 - Nissan Armada | Front Lower |
- Ball Joint
- Includes Powdered-Metal Gusher Bearing To Allow Grease To Penetrate Bearing Surfaces New Pre-Installed Integral Dust Boot Allows For Ease Of Installation Both New and Original Designs can be Installed on Vehicle
- MOOG K80647 Ball Joint
- Product Attributes:
- Adjustable: No
- Maximum Outside Diameter: 2.380
- Mounting Hole Quantity: 0
- Castle Nut Included: No
- Mounting Type: Press-in
- Greaseable: Yes
-
Features:
- PROBLEM SOLVER® GUSHER BEARING -- Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
- STRONG AND DURABLE -- Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
- GREASEABLE SOCKET -- Reduces corrosion and wear by allowing new lubricant to flush contaminants
- KEEPS DIRT AND WATER OUT -- Pre-installed dust boot shields socket components from wear-causing contaminants
- ABSORBS IMPACT -- Belleville preload washer helps keep the bearing package tight as bearings wear
- EASY TO INSTALL -- Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
- COMPREHENSIVE COVERAGE -- Available for foreign and domestic nameplates
- Backed by superior materials and rigorous testing, MOOG® ball joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
10480647, 260-1734, 45D2423, 46D2423A, 505-1426, 505-1426B, 531-348, 54500-7S001, 54500-ZR00A, 545009CD0A, 54500EA000, 54500EA00A, 54501-7S001, 54501-ZR00A, 54501EA00A, 54501ES00A, 610.42017, 61142017...VIEW MORE
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2011 - Nissan Armada | Front Lower |
- Rear Kit Required to Level the Rear to the Front Height. without Automatic Rear Air Leveling System Raises Front 1.75 IN
- Rancho Loaded quickLIFT Complete Strut Assembly
This Part Fits the Following OEM/Substitute Numbers:
561107S025, 561107S026, 561107S125, 561107S126, 561107S225, 561107S226, 561107S325, 561107S326, 561107S625, 561107S626, 56110ZC025, 56110ZC085, 562007S003, 562007S023, 562007S225, 562007S226, 562007S325, 562007S326...VIEW MORE
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2011 - Nissan Armada | Front Right |
- Rear Kit Required to Level the Rear to the Front Height. without Automatic Rear Air Leveling System Raises Front 1.75 IN
- Rancho Loaded quickLIFT Complete Strut Assembly
This Part Fits the Following OEM/Substitute Numbers:
561107S025, 561107S026, 561107S125, 561107S126, 561107S225, 561107S226, 561107S325, 561107S326, 561107S625, 561107S626, 56110ZC025, 56110ZC085, 562007S003, 562007S023, 562007S225, 562007S226, 562007S325, 562007S326...VIEW MORE
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2011 - Nissan Armada | Front Left |
- Suspension Ball Joint
- Product Attributes:
- Housing Press Fit Diameter: 41.2 Mm
- Mounting Hardware Included: No
- Package Contents: 1 Ball Joint; 1 Castle Nut; 1 Retaining Ring; 1 Zerk Fitting; 1 Cotter Pin
- Castle Nut Included: Yes
- Greaseable: Yes
- Cotter Pin Hole: Yes
- Dust Boot Material: Rubber
- Attachment Type: Taper
- Adjustable: No
- Stud Thread Diameter: 14
- Suspension Grade Type: Standard
- Bolts/Studs Included: Yes
- Bearing Material: Metal
- Mounting Type: Pressed
-
Features:
- Direct replacement - fits and performs like the original equipment on specific vehicles
- Reliable fit - precision-engineered to match the design and dimensions of original components
- Durable construction - manufactured to strict standards using sturdy, safe materials
- Rigorously tested - thorough quality control measures ensure longevity
- This suspension ball joint is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
1016006, 545257S000, 610.42021, FA2376E, GK80994, JBJ970, K80994, MK80994, TC5039
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2011 - Nissan Armada | Front Upper |
- Suspension Control Arm Bushing
- Product Attributes:
- Grade Type: Regular
- Mounting Hardware Included: No
- Package Contents: 1 Bushing
- Bushing 1 Width: 60 Mm
- Bushing 2 Inner Diameter: 12.2 Mm
- Mounting Hole Diameter: 14.2
- Length: 60
- Bushing 1 Outer Diameter: 39.3 Mm
- Bracket Included: No
- Bushing 2 Width: 66 Mm
- Bushing 1 Inner Diameter: 12.2 Mm
- Inside Diameter: 12.2
- Outside Diameter: 60
- Distance Between Mounting Holes: 54.5
- Bushing 2 Outer Diameter: 39.3 Mm
- Bushing Quantity: 2
- Mounting Type: Bushing
-
Features:
- Direct replacement - fits and performs like the original equipment bushing on specific vehicles
- Reliable fit - precision-engineered to match the design and dimensions of original components
- Durable construction - manufactured to strict standards using sturdy, safe materials
- Rigorously tested - thorough quality control measures ensure longevity
- This suspension control arm bushing is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2011 - Nissan Armada | Front Upper |
- B6 4600-Shock Absorber
- 46mm Monotube Shock Absorber
- B6 4600
- Product Attributes:
- California Proposition 65: Warning: Cancer & Reproductive Harm - Www.p65warnings.ca.gov
- Internal Design: Monotube
- Upper Mount Type: Stem
- Reservoir: No
- Body Inside Diameter: 46mm
- WARNING CA Proposition 65: Yes
- Body Design: Snap Ring Grooved Body (coilover)
- Spring Seat Included: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer & Reproductive Harm - Www.p65warnings.ca.gov
- Reservoir Included: No
- Boot Included: Blue Bellows
- Lower Mount Type: Eye 14.2mm
- Adjustable Damping: Non-adjustable
- Body Diameter (ID): 46mm
- Adjustable Length: No
-
Features:
- Bilstein 4600 Series
- Monotube Gas Pressure Construction
- Improved Ride And Handling
- Added Traction And Enhanced Stability
- Increased Performance Even When Towing Heavy Loads
- Vehicle Specific Ride Tuning
- Bilstein B6 4600 shock absorbers are designed as a direct fit upgrade to OE shock absorbers on stock height light trucks and SUV's. These shock absorbers feature a monotube design which provides consistent fade free performance. B6 4600 shock absorbers utilize a unique, velocity sensitive, digressive piston which reacts to changing road conditions. All B6 4600 shock absorbers are tuned for each specific application to ensure optimal performance is achieved. B6 4600 shock absorbers offer a significant improvement in ride quality, handling, and comfort.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
24-116237, 24197656, 56110-7S025, 56110-7S026, 56110-7S125, 56110-7S126, 56110-7S225, 56110-7S226, 56110-7S325, 56110-7S326, 56110-7S625, 56110-7S626, 56110-ZC025, 56110-ZC085, 56110-ZR50A, 930607, E6110-9FE0A, E6110-9FE0B...VIEW MORE
Additional Fitment Information:
| Vehicle | Position | Sub Model |
|---|---|---|
| 2011 - Nissan Armada | Front | Platinum |
- B8 5100 (Ride Height Adjustable)-Shock Absorber
- Front Lift Height: 0-2"
- 46mm Monotube Shock Absorber
- B8 5100 (Ride Height Adjustable)
- Product Attributes:
- California Proposition 65: Warning: Cancer & Reproductive Harm - Www.p65warnings.ca.gov
- Internal Design: Monotube
- Collapsed Length:
- 11.370 In.
- 288.7mm
- Upper Mount Type: Stem
- Extended Length (MM): 396.5
- Reservoir: No
- Body Inside Diameter: 46mm
- WARNING CA Proposition 65: Yes
- Body Design: Snap Ring Grooved Body (coilover)
- Spring Seat Included: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer & Reproductive Harm - Www.p65warnings.ca.gov
- Reservoir Included: No
- Collapsed Length (MM): 288.7
- Boot Included: Black Bellows
- Lower Mount Type: Eye 14.2mm
- Adjustable Damping: Non-adjustable
- Extended Length:
- 15.610 In.
- 396.5mm
- Body Diameter (ID): 46mm
-
Features:
- Bilstein 5100 Series
- Monotube Gas Pressure Construction
- Designed For Consistent Fade-Free Performance
- Self-Adjusting Deflective Disc Valving
- High-Flow Piston Reduces Harshness
- Available In Stem-To-Eye/Eye-To-Eye Mounting Configurations
- Zinc Coating For Resistance To Off-Road Elements
- Custom Valving Available
- Factory Rebuildable
- Made In The USA
- Bilstein B8 5100 (Ride Height Adjustable) shock absorbers are designed for trucks and SUVs with a front OE coilover style suspension. Multiple snap-ring grooves in the body allow for different spring seat positions, providing 0-2.75 inches of front lift with OE springs (depending on application). The monotube shock absorbers feature a 46mm digressive piston a with self-adjusting deflective disc valve setting. Bilstein B8 5100 (Ride Height Adjustable) shock absorbers provide increased wheel travel and improved handling. Utilizing a B8 5100 (Ride Height Adjustable) shock absorber is the easiest way to level out your vehicle.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
24-186759, 24197649, 450470
Additional Fitment Information:
| Vehicle | Position | Sub Model |
|---|---|---|
| 2011 - Nissan Armada | Front | Platinum |
- Caster/Camber Adjusting Kit
- Camber / Caster Plus or Minus 2 Degrees Non-Greasable
- MOOG K80276 Caster/Camber Adjusting Kit
-
Features:
- Can bring vehicles back to factory specification
- Can solve excessive tire wear and steering issues
- Shims and bushings provide precise camber, caster and toe adjustments
- Incorporates proven design and engineering features
- Cam bolts and adjustable ball joints provide alignment for non-adjustable vehicles
- By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry's Problem Solver.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
1380276A, 264-3699, 448202, 45K0192, 545511, 6111192, AA3699, MK80276, MS30007, VV80276A
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2011 - Nissan Armada | Front |
- Weight Capacity 1000 lbs.
- Suspension Enhancement System; Weight Capacity 1000 lbs.; Rear;
- Suspension Enhancement System
- Product Attributes:
- Usage: Light Duty Truck
- Axle Style: N/a
-
Features:
- Eliminate Suspension Sag And Cushion Road Shock
- Reduce Sway And Improve Roll Stability
- Easy To Install With Basic Hand Tools
- Improves Roll Control
- Trouble And Maintenance Free
- Satisfaction Guarantee And Lifetime Warranty
- Used To Carry Heavy Cargo Or Towing Trailers
- Leaders In Rubber Spring Technology Since 1965
- Timbren Suspension Kits (SES Kits) are designed to enhance the suspension of your vehicle. Easiest to use: Rubber cushions absorb road shocks and automatically adjust to uneven loads or road conditions. Easiest to maintain: There are no airlines or fittings to allow leaks. Simply bolt the kit on and you are set for a lifetime of trouble free suspension.Easiest to install: There are no holes to drill, no airlines to route and SES Kits can be installed in a matter of minutes using basic hand tools. The softer ride quality of todays trucks and the mediocre suspensions found on most trailers can cause excessive trailer sway, instability and suspension settling.Timbrens high performance suspension packages will ensure added safety and peace of mind.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2011 - Nissan Armada | Rear |
Showing 1 - 10 of 108 products
Loading...