2012 Ford Focus Suspension Parts
Choose your Part Name for your 2012 Ford Focus
Air Suspension Helper Spring
Alignment Camber Kit
Lateral Arm
Shock Absorber
Suspension Control Arm
Suspension Control Arm Bolt
Suspension Control Arm Bushing
Suspension Control Arm Nut
Suspension Control Arm and Ball Joint Assembly
Suspension Shock Absorber
Suspension Shock Absorber Nut
Suspension Shock Mounting Kit
Suspension Stabilizer Bar Bracket Bolt
Suspension Stabilizer Bar Bushing
Suspension Stabilizer Bar Link
Suspension Stabilizer Bar Link Kit
Suspension Strut
Suspension Strut Hardware Kit
Suspension Strut and Coil Spring Assembly
Suspension Trailing Arm Bushing
Image
Product
Price
- Coil Capacity Increase 15-30 Percent; Fill Out Coil SumoSprings Inspection before Ordering; Do Not Exceed GVWR; Inner Wall Height 2.25 in.
- Coil SumoSprings; Coil Capacity Increase 15-30 Percent; Fill Out Coil SumoSprings Inspection before Ordering; Do Not Exceed GVWR; Inner Wall Height 2.25 in.;
- Coil SumoSprings
-
Features:
- Sold as a pair left and right
- Requires no maintenance
- Proudly made in the U.S.A.
- Fit Both Front And Rear Coil Springs
- Coil SumoSprings Simply Slide Between The Turns Of Coil Springs
- Enhance Front Suspension When Fitting Snow Plow/Winch/Bumper
- Enhance Rear Suspension When Adding Tow Hitch
- Reduces Side To Side Body Roll And Front End Dip
- Produced From SumoSprings Closed Cell Microcellular Urethane
- Progressive Spring Rate
- Coil Capacity Increased By 15 To 30 Percent
- Typical Installation Completed In Less Than 30 Minutes
- Never Load Any Vehicle Beyond The Manufacturers GVWR
- Coil SumoSprings(R) improve the load leveling ability of original equipment front and rear coil springs. Manufactured from micro-cellular urethane, the material's progressive spring rate creates a cushion effect, enhancing capacity and ride comfort. They install by simply being slid between the turns of the coil spring.
Additional Fitment Information:
| Vehicle |
|---|
| 2012 - Ford Focus |
- Coil Capacity Increase 15-30 Percent; Fill Out Inspection before Ordering; Do Not Exceed GVWR; Inner Wall Height 2.25 in.
- Coil SumoSprings; Coil Capacity Increase 15-30 Percent; Fill Out Coil SumoSprings Inspection before Ordering; Do Not Exceed GVWR; Inner Wall Height 2.25 in.;
- Coil SumoSprings
-
Features:
- Sold as a pair left and right
- Requires no maintenance
- Proudly made in the U.S.A.
- Fit Both Front And Rear Coil Springs
- Coil SumoSprings Simply Slide Between The Turns Of Coil Springs
- Enhance Front Suspension When Fitting Snow Plow/Winch/Bumper
- Enhance Rear Suspension When Adding Tow Hitch
- Reduces Side To Side Body Roll And Front End Dip
- Produced From SumoSprings Closed Cell Microcellular Urethane
- Progressive Spring Rate
- Coil Capacity Increased By 15 To 30 Percent
- Typical Installation Completed In Less Than 30 Minutes
- Never Load Any Vehicle Beyond The Manufacturers GVWR
- Coil SumoSprings(R) improve the load leveling ability of original equipment front and rear coil springs. Manufactured from micro-cellular urethane, the material's progressive spring rate creates a cushion effect, enhancing capacity and ride comfort. They install by simply being slid between the turns of the coil spring.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2012 - Ford Focus | Rear |
- Support Bushing
- Product Attributes:
- Grade Type: Regular
- Mounting Hardware Included: No
- Package Contents: 1 Bushing
- Bushing 1 Width: 60 Mm
- Bushing 2 Inner Diameter: 12.2 Mm
- Length: 60
- Bushing 1 Outer Diameter: 39.3 Mm
- Bracket Included: No
- Bushing 2 Width: 66 Mm
- Bushing 1 Inner Diameter: 12.2 Mm
- Inside Diameter: 12.2
- Outside Diameter: 60
- Distance Between Mounting Holes: 44.9
- Bushing 2 Outer Diameter: 39.3 Mm
- Bushing Quantity: 2
- Mounting Type: Bushing
-
Features:
- Direct replacement - fits and performs like the original equipment bushing on specific vehicles
- Reliable fit - precision-engineered to match the design and dimensions of original components
- Durable construction - manufactured to strict standards using sturdy, safe materials
- Rigorously tested - thorough quality control measures ensure longevity
- This suspension control arm bushing is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
BV6Z5500C, K201688, NI
Additional Fitment Information:
| Vehicle | Position | Aspiration |
|---|---|---|
| 2012 - Ford Focus | Rear Lower Outer | Naturally Aspirated |
- Suspension Control Arm
- w/Stamped Steel Arms Non-Adjustable Arm
- Product Attributes:
- Ball Joint Included: No
- Grade Type: Regular
- Mounting Hardware Included: No
- Package Contents: 1 Control Arm
- Bushing Color: Black
- Bushing Inside Diameter: 14.3
- Length: 262.5
- Overall Length: 262.5 Mm
- Bushing Length: 92
- Bushing Outside Diameter: 39.6 Mm
- Bushings Included: Yes
- Ball Joint Stud Type: Threaded
- Grease Fitting Included: No
- End 2 Type: Press In
- Adjustable: No
- Mounting Brackets Included: No
- Construction: Casting/forged
- Ball Joint Mounting Type: Welded
- Linkage End Type: Bushing
- Bushing Material:
- Rubber
- Steel
- Ball Joint Installed: No
-
Features:
- Direct replacement - fits and performs like the original equipment on specific vehicles
- Reliable fit - precision-engineered to match the design and dimensions of original components
- Durable construction - manufactured to strict standards using sturdy, safe materials
- Rigorously tested - thorough quality control measures ensure longevity
- This suspension control arm is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.
This Part Fits the Following OEM/Substitute Numbers:
1686184, CMS76109, RK643062
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2012 - Ford Focus | Rear Left Upper |
- Suspension Control Arm
- w/Stamped Steel Arms Non-Adjustable Arm
- Product Attributes:
- Ball Joint Included: No
- Grade Type: Regular
- Mounting Hardware Included: No
- Package Contents: 1 Control Arm
- Bushing Color: Black
- Bushing Inside Diameter: 14.3
- Length: 262.5
- Overall Length: 262.5 Mm
- Bushing Length: 92
- Bushing Outside Diameter: 39.6 Mm
- Bushings Included: Yes
- Ball Joint Stud Type: Threaded
- Grease Fitting Included: No
- End 2 Type: Press In
- Adjustable: No
- Mounting Brackets Included: No
- Construction: Casting/forged
- Ball Joint Mounting Type: Welded
- Linkage End Type: Bushing
- Bushing Material:
- Rubber
- Steel
- Ball Joint Installed: No
-
Features:
- Direct replacement - fits and performs like the original equipment on specific vehicles
- Reliable fit - precision-engineered to match the design and dimensions of original components
- Durable construction - manufactured to strict standards using sturdy, safe materials
- Rigorously tested - thorough quality control measures ensure longevity
- This suspension control arm is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2012 - Ford Focus | Rear Right Upper |
- Strut-Mate Suspension Shock Mounting Kit
- Monroe Shocks & Struts Strut-Mate 906981 Suspension Shock Mounting Kit
- Monroe Strut-Mate Shock Mounting Kit
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
8N6118A116AB, CV6Z18A161B
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2012 - Ford Focus | Rear |
- Trailing Arm Bushing
- MOOG K200064 Trailing Arm Bushing
- Product Attributes:
- Mount Hole Diameter: 0.550
- Mount Hole Quantity: 2
- Includes Hardware: No
- Length (Inch): 5.590
- Part Description: Trailing Link Bushing
- Outer Diameter (Inch): 2.400
-
Features:
- Easy to install
- Restores like-new steering and handling
- Engineered to meet or exceed OE requirements
- Construction and design validated by MOOG engineers
- Incorporates proven design and engineering features
- By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry's Problem Solver.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
12200064, 250C30666821, 250JC23628200C, 274-9353, 45G26034, 4S4Z5A968AC, 4S4Z5A969AC, 523-067, 531-612, 579-1034, 60261174, 905-303, 98AG5K896AB, 9S4Z5A968A, 9S4Z5A969A, BC65546, BD4S4Z5A969AC, BDBP4K28200J...VIEW MORE
Additional Fitment Information:
| Vehicle | Position | Sub Model |
|---|---|---|
| 2012 - Ford Focus | Rear | S |
- Coil Capacity Increase 15-30 Percent; Fill Out Coil SumoSprings Inspection before Ordering; Do Not Exceed GVWR; Inner Wall Height 1.25 in.
- Coil SumoSprings; Coil Capacity Increase 15-30 Percent; Fill Out Coil SumoSprings Inspection before Ordering; Do Not Exceed GVWR; Inner Wall Height 1.25 in.;
- Coil SumoSprings
-
Features:
- Sold as a pair left and right
- Requires no maintenance
- Proudly made in the U.S.A.
- Fit Both Front And Rear Coil Springs
- Coil SumoSprings Simply Slide Between The Turns Of Coil Springs
- Enhance Front Suspension When Fitting Snow Plow/Winch/Bumper
- Enhance Rear Suspension When Adding Tow Hitch
- Reduces Side To Side Body Roll And Front End Dip
- Produced From SumoSprings Closed Cell Microcellular Urethane
- Progressive Spring Rate
- Coil Capacity Increased By 15 To 30 Percent
- Typical Installation Completed In Less Than 30 Minutes
- Never Load Any Vehicle Beyond The Manufacturers GVWR
- Coil SumoSprings(R) improve the load leveling ability of original equipment front and rear coil springs. Manufactured from micro-cellular urethane, the material's progressive spring rate creates a cushion effect, enhancing capacity and ride comfort. They install by simply being slid between the turns of the coil spring.
Additional Fitment Information:
| Vehicle |
|---|
| 2012 - Ford Focus |
- Coil Capacity Increase 15-30 Percent; Fill Out Inspection before Ordering; Do Not Exceed GVWR; Inner Wall Height 1.25 in.
- Coil SumoSprings; Coil Capacity Increase 15-30 Percent; Fill Out Coil SumoSprings Inspection before Ordering; Do Not Exceed GVWR; Inner Wall Height 1.25 in.;
- Coil SumoSprings
-
Features:
- Sold as a pair left and right
- Requires no maintenance
- Proudly made in the U.S.A.
- Fit Both Front And Rear Coil Springs
- Coil SumoSprings Simply Slide Between The Turns Of Coil Springs
- Enhance Front Suspension When Fitting Snow Plow/Winch/Bumper
- Enhance Rear Suspension When Adding Tow Hitch
- Reduces Side To Side Body Roll And Front End Dip
- Produced From SumoSprings Closed Cell Microcellular Urethane
- Progressive Spring Rate
- Coil Capacity Increased By 15 To 30 Percent
- Typical Installation Completed In Less Than 30 Minutes
- Never Load Any Vehicle Beyond The Manufacturers GVWR
- Coil SumoSprings(R) improve the load leveling ability of original equipment front and rear coil springs. Manufactured from micro-cellular urethane, the material's progressive spring rate creates a cushion effect, enhancing capacity and ride comfort. They install by simply being slid between the turns of the coil spring.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2012 - Ford Focus | Rear |
- OESpectrum Shock Absorber
- Recommended OE Application -Specific Replacement
- Monroe Shocks & Struts OESpectrum 5645 Shock Absorber
- Monroe OESpectrum Passenger Car Shock Absorber
- Monroe® OESpectrum® shock absorbers and struts are available for popular for European, Asian and North American passenger cars, light trucks and SUVs featuring Tenneco’s latest global original equipment valving technologies designed with the right technology specific for each application. OESpectrum shocks and struts provide an exceptional level of handling precision and control while filtering out noise, vibration and harshness. They are backed by Monroe’s Limited Lifetime Warranty and Feel the Difference™ Guarantee.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
349194, BV6Z18124C, BV6Z18124D, BV6Z18124E, BV6Z18124F, BV6Z18124G, BV6Z18124H, BV6Z18124J, BV6Z18124K, BV6Z18124L, BV6Z18124M, BV6Z18125A, BV6Z18125B, BV6Z18125C, BV6Z18125D, BV6Z18125E, BV6Z18125F, BV6Z18125G...VIEW MORE
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2012 - Ford Focus | Rear |
Showing 1 - 10 of 92 products
Loading...