2012 Nissan Frontier Suspension Parts
Choose your Part Name for your 2012 Nissan Frontier
Air Suspension Compressor
Air Suspension Compressor Kit
Air Suspension Helper Spring
Alignment Cam Bolt
Alignment Caster / Camber Kit
Coil Spring
Coil Spring Insulator
Jounce Bumper
Leaf Helper Spring
Leaf Spring Bushing
Leaf Spring Shackle
Leaf Spring Shackle Bushing
Leaf Spring Shackle Kit
Shock Absorber
Suspension Ball Joint
Suspension Control Arm
Suspension Control Arm Bolt
Suspension Control Arm Bushing
Suspension Control Arm Washer
Suspension Control Arm and Ball Joint Assembly
Suspension Leveling Kit
Suspension Lift Kit
Suspension Rubber Helper Spring Kit
Suspension Shock Absorber
Suspension Shock Absorber Mount Bracket
Suspension Shock Absorber Mount Plate
Suspension Shock Absorber Reservoir Mount
Suspension Stabilizer Bar Assembly
Suspension Stabilizer Bar Bushing
Suspension Stabilizer Bar Link
Suspension Stabilizer Bar Link Kit
Suspension Stabilizer Bar Link Nut
Suspension Strut Assembly
Suspension Strut Bellows
Suspension Strut Hardware Kit
Suspension Strut Spacer
Suspension Strut and Coil Spring Assembly
Image
Product
Price
- Ball Joint
- Both New and Original Designs can be Installed on Vehicle
- MOOG K80647 Ball Joint
- Product Attributes:
- Adjustable: No
- Maximum Outside Diameter: 2.380
- Mounting Hole Quantity: 0
- Castle Nut Included: No
- Mounting Type: Press-in
- Greaseable: Yes
-
Features:
- PROBLEM SOLVER® GUSHER BEARING -- Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
- STRONG AND DURABLE -- Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
- GREASEABLE SOCKET -- Reduces corrosion and wear by allowing new lubricant to flush contaminants
- KEEPS DIRT AND WATER OUT -- Pre-installed dust boot shields socket components from wear-causing contaminants
- ABSORBS IMPACT -- Belleville preload washer helps keep the bearing package tight as bearings wear
- EASY TO INSTALL -- Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
- COMPREHENSIVE COVERAGE -- Available for foreign and domestic nameplates
- Backed by superior materials and rigorous testing, MOOG® ball joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2012 - Nissan Frontier | Front Lower |
- Ball Joint
- Includes Powdered-Metal Gusher Bearing To Allow Grease To Penetrate Bearing Surfaces New Pre-Installed Integral Dust Boot Allows For Ease Of Installation Both New and Original Designs can be Installed on Vehicle
- MOOG K80647 Ball Joint
- Product Attributes:
- Adjustable: No
- Maximum Outside Diameter: 2.380
- Mounting Hole Quantity: 0
- Castle Nut Included: No
- Mounting Type: Press-in
- Greaseable: Yes
-
Features:
- PROBLEM SOLVER® GUSHER BEARING -- Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
- STRONG AND DURABLE -- Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
- GREASEABLE SOCKET -- Reduces corrosion and wear by allowing new lubricant to flush contaminants
- KEEPS DIRT AND WATER OUT -- Pre-installed dust boot shields socket components from wear-causing contaminants
- ABSORBS IMPACT -- Belleville preload washer helps keep the bearing package tight as bearings wear
- EASY TO INSTALL -- Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
- COMPREHENSIVE COVERAGE -- Available for foreign and domestic nameplates
- Backed by superior materials and rigorous testing, MOOG® ball joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
10480647, 260-1734, 45D2423, 46D2423A, 505-1426, 505-1426B, 531-348, 54500-7S001, 54500-ZR00A, 545009CD0A, 54500EA000, 54500EA00A, 54501-7S001, 54501-ZR00A, 54501EA00A, 54501ES00A, 610.42017, 61142017...VIEW MORE
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2012 - Nissan Frontier | Front Lower |
- OESpectrum Shock Absorber
- Recommended OE Application -Specific Replacement
- Monroe Shocks & Struts OESpectrum 37273 Shock Absorber
- Monroe OESpectrum Light Truck Shock Absorber
- Monroe® OESpectrum® shock absorbers and struts are available for popular for European, Asian and North American passenger cars, light trucks and SUVs featuring Tenneco’s latest global original equipment valving technologies designed with the right technology specific for each application. OESpectrum shocks and struts provide an exceptional level of handling precision and control while filtering out noise, vibration and harshness. They are backed by Monroe’s Limited Lifetime Warranty and Feel the Difference™ Guarantee.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
345067, 4160182Z00, 4160182Z10, 4170082Z10, 4500082Z00, 4600082Z00, 555051, 56110EA825, 56110ZP025, 56200EB025, 56200EB085, 56200ZP025, E6110ZL40A, E6110ZL60A, E6110ZP90A, E6200ZL40A, E6200ZL60A, E6200ZP50A...VIEW MORE
Additional Fitment Information:
| Vehicle | Position | Sub Model |
|---|---|---|
| 2012 - Nissan Frontier | Rear | SV |
- Active Off Road Bumpstops; Rear;
- Active Off Road Bumpstops
- Product Attributes:
- WARNING CA Proposition 65: No
-
Features:
- Designed To Maximize Axle Travel
- Progressive Spring Rate
- Absorbs Energy
- Allows Smooth Axle Engagement
- Easy Installation
- Satisfaction Guarantee
- The Active Off-Road Bumpstops offer off-road enthusiasts greater control over their vehicles' suspension travel. Using progressive-rate springs means that instead of a hard stop at the end of axle travel the axle energy will be absorbed when bottoming-out producing smooth, predictable and quiet axle engagement and disengagement. Unlike the OEM bumpstops, Timbren uses superior natural rubber compound ensuring the Active Off-Road Bumpstops will continue to operate even after a lifetime of off-road abuse. Similar to our Timbren SES line, Active Off-Road Bumpstops carry a lifetime warranty and a satisfaction guarantee. The ABSOSR replaces the rear bumpstops on the 2015-17 Chevrolet Colorado & GMC Canyon as well as the Nissan Frontier. This bumpstop kit can also be used on the 2005-2017 Toyota Tacoma without a U-bolt flip kit and 2000-17 Toyota Tundra. Install a bumpstop kit and experience the difference.
Additional Fitment Information:
| Vehicle | Position | Sub Model |
|---|---|---|
| 2012 - Nissan Frontier | Rear | PRO-4X |
- Weight Capacity 3000 lbs.; 3 Leaf OEM
- Suspension Enhancement System; Weight Capacity 3000 lbs.; 3 Leaf OEM; Rear;
- Suspension Enhancement System
- Product Attributes:
- Usage: Light Duty Truck
- Axle Style: N/a
-
Features:
- Eliminate Suspension Sag And Cushion Road Shock
- Reduce Sway And Improve Roll Stability
- Easy To Install With Basic Hand Tools
- Improves Roll Control
- Trouble And Maintenance Free
- Satisfaction Guarantee And Lifetime Warranty
- Used To Carry Heavy Cargo Or Towing Trailers
- Leaders In Rubber Spring Technology Since 1965
- Timbren Suspension Kits (SES Kits) are designed to enhance the suspension of your vehicle. Easiest to use: Rubber cushions absorb road shocks and automatically adjust to uneven loads or road conditions. Easiest to maintain: There are no airlines or fittings to allow leaks. Simply bolt the kit on and you are set for a lifetime of trouble free suspension.Easiest to install: There are no holes to drill, no airlines to route and SES Kits can be installed in a matter of minutes using basic hand tools. The softer ride quality of todays trucks and the mediocre suspensions found on most trailers can cause excessive trailer sway, instability and suspension settling.Timbrens high performance suspension packages will ensure added safety and peace of mind.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2012 - Nissan Frontier | Rear |
- Active Off Road Bumpstops; Rear;
- Active Off Road Bumpstops
- Product Attributes:
- WARNING CA Proposition 65: No
-
Features:
- Designed To Maximize Axle Travel
- Progressive Spring Rate
- Absorbs Energy
- Allows Smooth Axle Engagement
- Easy Installation
- Satisfaction Guarantee
- The Active Off-Road Bumpstops offer off-road enthusiasts greater control over their vehicles' suspension travel. Using progressive-rate springs means that instead of a hard stop at the end of axle travel the axle energy will be absorbed when bottoming-out producing smooth, predictable and quiet axle engagement and disengagement. Unlike the OEM bumpstops, Timbren uses superior natural rubber compound ensuring the Active Off-Road Bumpstops will continue to operate even after a lifetime of off-road abuse. Similar to our Timbren SES line, Active Off-Road Bumpstops carry a lifetime warranty and a satisfaction guarantee. The ABSOSR replaces the rear bumpstops on the 2015-17 Chevrolet Colorado & GMC Canyon as well as the Nissan Frontier. This bumpstop kit can also be used on the 2005-2017 Toyota Tacoma without a U-bolt flip kit and 2000-17 Toyota Tundra. Install a bumpstop kit and experience the difference.
Additional Fitment Information:
| Vehicle | Position | Sub Model |
|---|---|---|
| 2012 - Nissan Frontier | Rear | PRO-4X |
- Weight Capacity 3000 lbs.; 3 Leaf OEM
- Suspension Enhancement System; Weight Capacity 3000 lbs.; 3 Leaf OEM; Rear;
- Suspension Enhancement System
- Product Attributes:
- Usage: Light Duty Truck
- Axle Style: N/a
-
Features:
- Eliminate Suspension Sag And Cushion Road Shock
- Reduce Sway And Improve Roll Stability
- Easy To Install With Basic Hand Tools
- Improves Roll Control
- Trouble And Maintenance Free
- Satisfaction Guarantee And Lifetime Warranty
- Used To Carry Heavy Cargo Or Towing Trailers
- Leaders In Rubber Spring Technology Since 1965
- Timbren Suspension Kits (SES Kits) are designed to enhance the suspension of your vehicle. Easiest to use: Rubber cushions absorb road shocks and automatically adjust to uneven loads or road conditions. Easiest to maintain: There are no airlines or fittings to allow leaks. Simply bolt the kit on and you are set for a lifetime of trouble free suspension.Easiest to install: There are no holes to drill, no airlines to route and SES Kits can be installed in a matter of minutes using basic hand tools. The softer ride quality of todays trucks and the mediocre suspensions found on most trailers can cause excessive trailer sway, instability and suspension settling.Timbrens high performance suspension packages will ensure added safety and peace of mind.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2012 - Nissan Frontier | Rear |
- Solo Kits Are Replacements To Factory Bump Stops; Capacity 1500 lbs. At 50 Percent Compression; Do Not Exceed GVWR; No Drill Required
- SumoSprings; Solo Kits Are Replacements To Factory Bump Stops; Capacity 1500 lbs. At 50 Percent Compression; Do Not Exceed GVWR; No Drill Required;
- SumoSprings
- Product Attributes:
- Max Load: 1500 Lbs.
-
Features:
- Sold as a pair left and right
- Requires no maintenance
- Proudly made in the U.S.A.
- Enhances Load Carrying Ability
- 1500 Pounds Capacity At 50 Percent Compression
- Reduces And Stabilizes Sway
- Improves Overall Driver Control And Ride Comfort
- Compress Up To 80 Pct Original Height With Full Memory Rebound
- One Pc. On One Side As Replacement/Upgrade To Fact. Bump Stops
- Progressive Spring Rate
- Made From Proprietary And Patented Microcellular Urethane
- Worlds Only Leak Proof Air Spring
- Never Load Any Vehicle Beyond The Manufacturers GVWR
- SumoSprings(R) are a patented suspension product designed to enhance load carrying ability, stabilize sway, and improve overall driver control and ride comfort. They are maintenance free, do not leak air, and do not require airlines or compressors. SumoSprings(R) are manufactured in a variety of heights, diameters and densities to support multiple front and rear applications. They are manufactured from proprietary closed micro-cellular urethane providing a smooth and progressive spring rate.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2012 - Nissan Frontier | Rear |
- Solo Kits Are Replacements To Factory Bump Stops; Capacity 2800 lbs. At 50 Percent Compression; Do Not Exceed GVWR
- SumoSprings; Solo Kits Are Replacements To Factory Bump Stops; Capacity 2800 lbs. At 50 Percent Compression; Do Not Exceed GVWR;
- SumoSprings
- Product Attributes:
- Max Load: 2800 Lbs.
-
Features:
- Sold as a pair left and right
- Requires no maintenance
- Proudly made in the U.S.A.
- Enhances Load Carrying Ability
- 2800 Pounds Capacity At 50 Percent Compression
- Reduces And Stabilizes Sway
- Improves Overall Driver Control And Ride Comfort
- Compress Up To 80 Pct Original Height With Full Memory Rebound
- 1 Pc. Attached On Top/Bottom Will Stretch 50 Pct Of Body Height
- Progressive Spring Rate
- Made From Proprietary And Patented Microcellular Urethane
- Worlds Only Leak Proof Air Spring
- Never Load Any Vehicle Beyond The Manufacturers GVWR
- SumoSprings(R) are a patented suspension product designed to enhance load carrying ability, stabilize sway, and improve overall driver control and ride comfort. They are maintenance free, do not leak air, and do not require airlines or compressors. SumoSprings(R) are manufactured in a variety of heights, diameters and densities to support multiple front and rear applications. They are manufactured from proprietary closed micro-cellular urethane providing a smooth and progressive spring rate.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2012 - Nissan Frontier | Rear |
- Caster/Camber Adjusting Kit
- Camber / Caster Plus or Minus 2 Degrees Non-Greasable
- MOOG K80276 Caster/Camber Adjusting Kit
-
Features:
- Can bring vehicles back to factory specification
- Can solve excessive tire wear and steering issues
- Shims and bushings provide precise camber, caster and toe adjustments
- Incorporates proven design and engineering features
- Cam bolts and adjustable ball joints provide alignment for non-adjustable vehicles
- By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry's Problem Solver.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
1380276A, 264-3699, 448202, 45K0192, 545511, 6111192, AA3699, MK80276, MS30007, VV80276A
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2012 - Nissan Frontier | Front |
Showing 1 - 10 of 144 products
Loading...