2017 Ford F 150 Suspension Parts
Choose your Part Name for your 2017 Ford F-150
Air Suspension Compressor Kit
Air Suspension Helper Spring
Air Suspension Helper Spring Kit
Alignment Caster / Camber Kit
Axle Spindle
Coil Spring Set
Coilover Adjustable Spring Lowering Kit
Coilover Spring and Shock Assembly
Leaf Helper Spring
Leaf Spring
Leaf Spring Shackle Kit
Leaf Spring Shackle Lowering Kit
Shock Absorber
Shock Absorber Set
Suspension Ball Joint
Suspension Ball Joint Nut / Washer
Suspension Control Arm
Suspension Control Arm Bushing
Suspension Control Arm Bushing Kit
Suspension Control Arm Kit
Suspension Control Arm Nut
Suspension Control Arm and Ball Joint Assembly
Suspension Kit
Suspension Leaf Spring Block Kit
Suspension Leveling Kit
Suspension Lift Kit
Suspension Lowering Kit
Suspension Rubber Helper Spring Kit
Suspension Shock Absorber
Suspension Shock Absorber Bushing
Suspension Shock Absorber Kit
Suspension Shock Absorber Mount
Suspension Shock Absorber Reservoir Mount
Suspension Stabilizer Bar Assembly
Suspension Stabilizer Bar Bushing
Suspension Stabilizer Bar Link
Suspension Stabilizer Bar Link Kit
Suspension Stabilizer Bar Link Nut
Suspension Strut
Suspension Strut Assembly
Suspension Strut Bellows
Suspension Strut Mount Kit
Suspension Strut Nut
Suspension Strut Spacer
Suspension Strut and Coil Spring Assembly
Suspension Subframe Reinforcement Bracket
Suspension Traction Bar
Image
Product
Price
- Strut-Mate Suspension Strut Bellows
- Monroe Shocks & Struts Strut-Mate 63631 Suspension Strut Bellows
- Monroe Strut-Mate Strut Boot Kit
- Heavy-duty construction and unique design features make the Monroe® Strut-Mate® boot kit the quality choice for maximum rod protection and improved strut life. Damaged boots may not protect the rod finish. A pitted piston rod can lead to premature strut failure. Deteriorated OE bumpers may not offer adequate protection from severe suspension movement, leading to premature strut failure.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
143057, 143059, 5171132AB, 5171132AC, SB103, SB129
Additional Fitment Information:
| Vehicle | Position | Sub Model | Drive Type |
|---|---|---|---|
| 2017 - Ford F-150 | Front | King Ranch | 4WD |
- Coil Spring Set
- Standard Duty 1st Digit of Spring Code on Door is U, T, S, 3, R OR 2 Constant Rate Spring
- MOOG 81118 Coil Spring Set
- Product Attributes:
- Spring Color: Black
- Rear Spring Relaxed Length:
- 17.14
- 435.36
- Wire Diameter:
- 0.75
- 19.05
- Front Spring Compressed Length: 9.53
- Rear Spring Compressed Length: 9.53
- Front Spring Outside Diameter: 5.180
- Front Spring Relaxed Length:
- 17.14
- 435.36
- Rear Spring Outside Diameter: 5.180
-
Features:
- 100% Load tested
- Easy to install
- Provides like-new steering
- Designed to lower stresses for longer service life
- Worn or sagging coil springs can cause premature tire wear due to vehicle misalignment
- By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry's Problem Solver.
This Part Fits the Following OEM/Substitute Numbers:
277-3493, 45H0383, 45H0384, 4L345310CA, 4L3Z5310BA, 585-1383, 585-1384, 8L3Z5310R, 8L3Z5310S, 8L3Z5310T, 8L3Z5310U, 8L3Z5310V, CS81118, FCS20592S, SMS81118
Additional Fitment Information:
| Vehicle | Position | Drive Type |
|---|---|---|
| 2017 - Ford F-150 | Front | 4WD |
- Coil Spring Set
- Standard Duty 1st Digit of Spring Code on Door is S Constant Rate Spring
- MOOG 81118 Coil Spring Set
- Product Attributes:
- Spring Color: Black
- Rear Spring Relaxed Length:
- 17.14
- 435.36
- Wire Diameter:
- 0.75
- 19.05
- Front Spring Compressed Length: 9.53
- Rear Spring Compressed Length: 9.53
- Front Spring Outside Diameter: 5.180
- Front Spring Relaxed Length:
- 17.14
- 435.36
- Rear Spring Outside Diameter: 5.180
-
Features:
- 100% Load tested
- Easy to install
- Provides like-new steering
- Designed to lower stresses for longer service life
- Worn or sagging coil springs can cause premature tire wear due to vehicle misalignment
- By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry's Problem Solver.
Additional Fitment Information:
| Vehicle | Position | Drive Type |
|---|---|---|
| 2017 - Ford F-150 | Front | RWD |
- 2015-2020 FORD F-150 4WD 0-2.63" STAGE 1 SUSPENSION SYSTEM
- Raises Front 0 (in) - 2.63 (in) Use Up To 33 (in) x 11.50 (in) Tires with 1 (in) Maximum Lift Rear ; Recommended Aftermarket Wheel Size: 17x8.5" with 5” Backspace / 6mm Offset Lift heights above 2” over stock may require aftermarket front upper control arms to maintain proper alignment
- 2015-2020 FORD F-150 4WD 0-2.63" LIFT STAGE 1 SUSPENSION SYSTEM
- 2015-2020 FORD F150 4WD 0-2.63" STAGE 1 SUSPENSION SYSTEM
- Product Attributes:
- California Proposition 65: Warning: This Product Contains Chemicals Known To The State Of California To Cause Cancer, And Birth Defects Or Other Reproductive Harm.
- Recommended Aftermarket Tires: 33" X 11.50" (larger Tires May Fit But Fender Trimming And Modifications Will Be Required.)
- Recommended Aftermarket Wheels:
- Icon Alloys | 17x8.5" W/ 5” Backspace / 6mm Offset
- Icon Alloys | 18x9" W/ 5.25" Backspace / 6mm Offset
- Icon Alloys | 20x9" W/ 5.625" Backspace / 16mm Offset
- Grade Type: Performance
- Mounting Hardware Included: Yes
- Bushings Included: No
- Spring Color: Black
- Maximum Lift: 2.63
- Title: 2015-2020 Ford F-150 4wd 0-2.63" Stage 1 Suspension System
- Coils Quantity Front: 2
- Spring Material: Steel
- Shocks Included: Yes
- OEM Wheels & Tires Fitment: Yes
-
Features:
- Increased wheel travel and ride quality over stock with no change in towing capacity
- Unique valving developed for the lighter weight of the 2015-2020 F-150
- Vehicle specific tuned front and rear shocks for superior damping and vehicle control
- Adjustable coilovers from 0-2.63" of lift height
- 6061 Aircraft grade aluminum CNC machined components
- Corrosion resistant CAD plated coilover shock body with 7/8 shaft
- High strength alloy CNC machined lower bar pin
- FK rod end bearings for extended longevity and minimal deflection
- 2.0 aluminum body rear IFP shock with 5/8" polished shaft
- 100% Bolt-on system - no drilling, cutting, or welding necessary for install
- ICON Vehicle Dynamics 2015-2020 Ford F-150 4WD suspension systems are designed with maximum performance and the serious driver in mind. ICON engineers’ primary focus is to increase wheel travel and damping ability, which translates into outstanding vehicle control and ride quality both on and off-road. The Stage 1 system includes vehicle-specific tuned 2.5” coilover shocks featuring an internal reservoir for exceptional cooling properties and ICON-engineered Eibach coil springs for superior vehicle “feel” through the range of travel. These coilovers are also height adjustable from 0-2.63” allowing the use of larger, more aggressive wheel and tire combinations. ICON 2.0 Aluminum Series monotube rear shocks utilize a vehicle-specific valving that balances the performance of the truck from front to rear. The ICON Vehicle Dynamics 2015-2020 F-150 4WD Stage 1 suspension system is an excellent choice for those drivers looking to enhance the capabilities of their pickup on the road as well as in the dirt.
Additional Fitment Information:
| Vehicle | Position | Sub Model | Drive Type |
|---|---|---|---|
| 2017 - Ford F-150 | Front and Rear | SSV | 4WD |
- 2015-2020 FORD F150 4WD 0-2.63" STAGE 2 SUSPENSION SYSTEM W TUBULAR UCA
- Raises Front 1.75 (in) - 2.63 (in) Use Up To 33 (in) x 11.50 (in) Tires with OE Spindles with 1 (in) Maximum Lift Rear ; Recommended Aftermarket Wheel Size: 17x8.5" with 5” Backspace / 6mm Offset
- 2015-2020 FORD F-150 4WD 0-2.63" LIFT STAGE 2 SUSPENSION SYSTEM WITH TUBULAR UCA
- 2015-UP FORD F150 4WD 0-2.63" STAGE 2 SUSPENSION SYSTEM W TUBULAR UCA
- Product Attributes:
- California Proposition 65: Warning: This Product Contains Chemicals Known To The State Of California To Cause Cancer, And Birth Defects Or Other Reproductive Harm.
- Recommended Aftermarket Tires: 33" X 11.50" (larger Tires May Fit But Fender Trimming And Modifications Will Be Required.)
- Recommended Aftermarket Wheels:
- Icon Alloys | 17x8.5" W/ 5” Backspace / 6mm Offset
- Icon Alloys | 18x9" W/ 5.25" Backspace / 6mm Offset
- Icon Alloys | 20x9" W/ 5.625" Backspace / 16mm Offset
- Grade Type: Performance
- Mounting Hardware Included: Yes
- Bushings Included: No
- Spring Color: Black
- Maximum Lift: 2.63
- Title: 2015-2020 Ford F150 4wd 0-2.63" Stage 2 Suspension System W Tubular Uca
- Coils Quantity Front: 2
- Spring Material: Steel
- Shocks Included: Yes
- OEM Wheels & Tires Fitment: Yes
-
Features:
- Increased wheel travel and ride quality over stock with no change in towing capacity
- Unique valving developed for the lighter weight of the 2015-2020 F-150
- Vehicle specific tuned front and rear shocks for superior damping and vehicle control
- Adjustable coilovers from 0-2.63" of lift height
- Tubular Upper Control Arms for added strength, durability, and alignment spec range
- 6061 Aircraft grade aluminum CNC machined components
- Corrosion resistant CAD plated coilover shock body with 7/8 shaft
- High strength alloy CNC machined lower bar pin
- FK rod end bearings for extended longevity and minimal deflection
- 2.0 aluminum body rear IFP shock with 5/8" polished nitro steel shaft
- 100% Bolt-on system - no drilling, cutting or welding necessary for install
- This system features upper control arms with ICON's patented Delta Joint. The Delta Joint is a heavy-duty high angle ball joint that combines the durability of a ball joint with the performance characteristics of a traditional uniball. While the industry standard uniball does a great job of allowing the control arms of a vehicle to articulate with little bind, they do have an inherent weakness that leaves more to be desired when used in a daily driven application - exposure to the elements. The Delta Joint features a zinc plated housing providing the first layer of corrosion resistance, while a tough grease seal keeps potentially harmful elements out of the inner workings of the joint. Metal on metal construction and a greaseable design increase the longevity of the Delta Joint while at the same time allowing for noise-free operation. What makes the Delta Joint unique is that it brings the best of both worlds to ICON upper control arms with features that make it more robust than a uniball, and at the same time capable of greater angularity than a typical ball joint.
Additional Fitment Information:
| Vehicle | Position | Sub Model | Drive Type |
|---|---|---|---|
| 2017 - Ford F-150 | Front and Rear | SSV | 4WD |
- Raises Front 1.75 (in) - 2.63 (in) Use Up To 33 (in) x 11.50 (in) Tires with OE Spindles with 1 (in) Maximum Lift Rear ; Recommended Aftermarket Wheel Size: 17x8.5" with 5” Backspace / 6mm Offset
- 2015-2020 FORD F-150 4WD 0-2.63" LIFT STAGE 3 SUSPENSION SYSTEM WITH TUBULAR UCA
- 2015-2020 FORD F150 4WD 0-2.63" STAGE 3 SUSPENSION SYSTEM W TUBULAR UCA
- Product Attributes:
- California Proposition 65: Warning: This Product Contains Chemicals Known To The State Of California To Cause Cancer, And Birth Defects Or Other Reproductive Harm.
- Recommended Aftermarket Tires: 33" X 11.50" (larger Tires May Fit But Fender Trimming And Modifications Will Be Required.)
- Recommended Aftermarket Wheels:
- Icon Alloys | 17x8.5" W/ 5” Backspace / 6mm Offset
- Icon Alloys | 18x9" W/ 5.25" Backspace / 6mm Offset
- Icon Alloys | 20x9" W/ 5.625" Backspace / 16mm Offset
- Grade Type: Performance
- Mounting Hardware Included: Yes
- Bushings Included: No
- Spring Color: Black
- Maximum Lift: 2.63
- Title: 2015-2020 Ford F150 4wd 0-2.63" Stage 3 Suspension System W Tubular Uca
- Coils Quantity Front: 2
- Spring Material: Steel
- Shocks Included: Yes
- OEM Wheels & Tires Fitment: Yes
-
Features:
- Increased wheel travel and ride quality over stock with no change in towing capacity
- Unique valving developed for the lighter weight of the 2015-2020 F-150
- Vehicle specific tuned front and rear shocks for superior damping and vehicle control
- Adjustable coilovers from 0-2.63" of lift height
- Tubular Upper Control Arms for added strength, durability, and alignment spec range
- 6061 Aircraft grade aluminum CNC machined components
- Corrosion resistant CAD plated coilover shock bodies with 7/8" shafts
- High strength alloy CNC machined lower bar pin
- FK rod end bearings for extended longevity and minimal deflection
- 2.5 Aluminum Series rear shocks feature one-piece impact extruded aluminum cylinders for excellent corrosion resistance and consistent finish
- Bolt-on system - No cutting or welding necessary for install
- ICON Vehicle Dynamics 2015-2020 Ford F-150 4WD suspension systems are designed with maximum performance and the serious driver in mind. ICON engineers’ primary focus is to increase wheel travel and damping ability, which translates into outstanding vehicle control and ride quality both on and off-road. The Stage 3 system includes vehicle-specific tuned 2.5” coilover shocks featuring an internal reservoir for exceptional cooling properties and ICON-engineered Eibach coil springs for superior vehicle “feel” through the range of travel. These coilovers are also height adjustable from 0-2.63” allowing the use of larger, more aggressive wheel and tire combinations. Tubular upper control arms on the F-150 not only add strength and durability, but help retain factory alignment spec range increasing caster over stock. ICON 2.5 Aluminum Series piggyback reservoir rear shocks utilize a vehicle-specific valving that balances the performance of the truck from front to rear. The ICON Vehicle Dynamics 2015-2020 F-150 4WD Stage 3 suspension system is an excellent choice for those drivers looking to enhance the capabilities of their pickup on the road as well as in the dirt.
Additional Fitment Information:
| Vehicle | Position | Sub Model | Drive Type |
|---|---|---|---|
| 2017 - Ford F-150 | Front and Rear | SSV | 4WD |
- 2015-2020 FORD F150 4WD 0-2.63" STAGE 2 SUSPENSION SYSTEM W TUBULAR UCA
- 0 (in) - 2.63 (in) Lift
- 2015-2020 FORD F-150 4WD 0-2.63" LIFT STAGE 2 SUSPENSION SYSTEM WITH TUBULAR UCA
- 2015-UP FORD F150 4WD 0-2.63" STAGE 2 SUSPENSION SYSTEM W TUBULAR UCA
- Product Attributes:
- California Proposition 65: Warning: This Product Contains Chemicals Known To The State Of California To Cause Cancer, And Birth Defects Or Other Reproductive Harm.
- Recommended Aftermarket Tires: 33" X 11.50" (larger Tires May Fit But Fender Trimming And Modifications Will Be Required.)
- Recommended Aftermarket Wheels:
- Icon Alloys | 17x8.5" W/ 5” Backspace / 6mm Offset
- Icon Alloys | 18x9" W/ 5.25" Backspace / 6mm Offset
- Icon Alloys | 20x9" W/ 5.625" Backspace / 16mm Offset
- Grade Type: Performance
- Mounting Hardware Included: Yes
- Bushings Included: No
- Spring Color: Black
- Maximum Lift: 2.63
- Title: 2015-2020 Ford F150 4wd 0-2.63" Stage 2 Suspension System W Tubular Uca
- Coils Quantity Front: 2
- Spring Material: Steel
- Shocks Included: Yes
- OEM Wheels & Tires Fitment: Yes
-
Features:
- Increased wheel travel and ride quality over stock with no change in towing capacity
- Unique valving developed for the lighter weight of the 2015-2020 F-150
- Vehicle specific tuned front and rear shocks for superior damping and vehicle control
- Adjustable coilovers from 0-2.63" of lift height
- Tubular Upper Control Arms for added strength, durability, and alignment spec range
- 6061 Aircraft grade aluminum CNC machined components
- Corrosion resistant CAD plated coilover shock body with 7/8 shaft
- High strength alloy CNC machined lower bar pin
- FK rod end bearings for extended longevity and minimal deflection
- 2.0 aluminum body rear IFP shock with 5/8" polished nitro steel shaft
- 100% Bolt-on system - no drilling, cutting or welding necessary for install
- This system features upper control arms with ICON's patented Delta Joint. The Delta Joint is a heavy-duty high angle ball joint that combines the durability of a ball joint with the performance characteristics of a traditional uniball. While the industry standard uniball does a great job of allowing the control arms of a vehicle to articulate with little bind, they do have an inherent weakness that leaves more to be desired when used in a daily driven application - exposure to the elements. The Delta Joint features a zinc plated housing providing the first layer of corrosion resistance, while a tough grease seal keeps potentially harmful elements out of the inner workings of the joint. Metal on metal construction and a greaseable design increase the longevity of the Delta Joint while at the same time allowing for noise-free operation. What makes the Delta Joint unique is that it brings the best of both worlds to ICON upper control arms with features that make it more robust than a uniball, and at the same time capable of greater angularity than a typical ball joint.
Additional Fitment Information:
| Vehicle | Position | Sub Model | Drive Type |
|---|---|---|---|
| 2017 - Ford F-150 | Front and Rear | Lariat | 4WD |
- 0 (in) - 2.63 (in) Lift
- 2015-2020 FORD F-150 4WD 0-2.63" LIFT STAGE 3 SUSPENSION SYSTEM WITH TUBULAR UCA
- 2015-2020 FORD F150 4WD 0-2.63" STAGE 3 SUSPENSION SYSTEM W TUBULAR UCA
- Product Attributes:
- California Proposition 65: Warning: This Product Contains Chemicals Known To The State Of California To Cause Cancer, And Birth Defects Or Other Reproductive Harm.
- Recommended Aftermarket Tires: 33" X 11.50" (larger Tires May Fit But Fender Trimming And Modifications Will Be Required.)
- Recommended Aftermarket Wheels:
- Icon Alloys | 17x8.5" W/ 5” Backspace / 6mm Offset
- Icon Alloys | 18x9" W/ 5.25" Backspace / 6mm Offset
- Icon Alloys | 20x9" W/ 5.625" Backspace / 16mm Offset
- Grade Type: Performance
- Mounting Hardware Included: Yes
- Bushings Included: No
- Spring Color: Black
- Maximum Lift: 2.63
- Title: 2015-2020 Ford F150 4wd 0-2.63" Stage 3 Suspension System W Tubular Uca
- Coils Quantity Front: 2
- Spring Material: Steel
- Shocks Included: Yes
- OEM Wheels & Tires Fitment: Yes
-
Features:
- Increased wheel travel and ride quality over stock with no change in towing capacity
- Unique valving developed for the lighter weight of the 2015-2020 F-150
- Vehicle specific tuned front and rear shocks for superior damping and vehicle control
- Adjustable coilovers from 0-2.63" of lift height
- Tubular Upper Control Arms for added strength, durability, and alignment spec range
- 6061 Aircraft grade aluminum CNC machined components
- Corrosion resistant CAD plated coilover shock bodies with 7/8" shafts
- High strength alloy CNC machined lower bar pin
- FK rod end bearings for extended longevity and minimal deflection
- 2.5 Aluminum Series rear shocks feature one-piece impact extruded aluminum cylinders for excellent corrosion resistance and consistent finish
- Bolt-on system - No cutting or welding necessary for install
- ICON Vehicle Dynamics 2015-2020 Ford F-150 4WD suspension systems are designed with maximum performance and the serious driver in mind. ICON engineers’ primary focus is to increase wheel travel and damping ability, which translates into outstanding vehicle control and ride quality both on and off-road. The Stage 3 system includes vehicle-specific tuned 2.5” coilover shocks featuring an internal reservoir for exceptional cooling properties and ICON-engineered Eibach coil springs for superior vehicle “feel” through the range of travel. These coilovers are also height adjustable from 0-2.63” allowing the use of larger, more aggressive wheel and tire combinations. Tubular upper control arms on the F-150 not only add strength and durability, but help retain factory alignment spec range increasing caster over stock. ICON 2.5 Aluminum Series piggyback reservoir rear shocks utilize a vehicle-specific valving that balances the performance of the truck from front to rear. The ICON Vehicle Dynamics 2015-2020 F-150 4WD Stage 3 suspension system is an excellent choice for those drivers looking to enhance the capabilities of their pickup on the road as well as in the dirt.
Additional Fitment Information:
| Vehicle | Position | Sub Model | Drive Type |
|---|---|---|---|
| 2017 - Ford F-150 | Front and Rear | Lariat | 4WD |
- 2015-2020 FORD F-150 4WD 0-2.63" STAGE 1 SUSPENSION SYSTEM
- 0 (in) - 2.63 (in) Lift Use Up To 33 (in) x 11.50 (in) Tires with 1 (in) Maximum Lift Rear ; Recommended Aftermarket Wheel Size: 17x8.5" with 5” Backspace / 6mm Offset Lift heights above 2” over stock may require aftermarket front upper control arms to maintain proper alignment
- 2015-2020 FORD F-150 4WD 0-2.63" LIFT STAGE 1 SUSPENSION SYSTEM
- 2015-2020 FORD F150 4WD 0-2.63" STAGE 1 SUSPENSION SYSTEM
- Product Attributes:
- California Proposition 65: Warning: This Product Contains Chemicals Known To The State Of California To Cause Cancer, And Birth Defects Or Other Reproductive Harm.
- Recommended Aftermarket Tires: 33" X 11.50" (larger Tires May Fit But Fender Trimming And Modifications Will Be Required.)
- Recommended Aftermarket Wheels:
- Icon Alloys | 17x8.5" W/ 5” Backspace / 6mm Offset
- Icon Alloys | 18x9" W/ 5.25" Backspace / 6mm Offset
- Icon Alloys | 20x9" W/ 5.625" Backspace / 16mm Offset
- Grade Type: Performance
- Mounting Hardware Included: Yes
- Bushings Included: No
- Spring Color: Black
- Maximum Lift: 2.63
- Title: 2015-2020 Ford F-150 4wd 0-2.63" Stage 1 Suspension System
- Coils Quantity Front: 2
- Spring Material: Steel
- Shocks Included: Yes
- OEM Wheels & Tires Fitment: Yes
-
Features:
- Increased wheel travel and ride quality over stock with no change in towing capacity
- Unique valving developed for the lighter weight of the 2015-2020 F-150
- Vehicle specific tuned front and rear shocks for superior damping and vehicle control
- Adjustable coilovers from 0-2.63" of lift height
- 6061 Aircraft grade aluminum CNC machined components
- Corrosion resistant CAD plated coilover shock body with 7/8 shaft
- High strength alloy CNC machined lower bar pin
- FK rod end bearings for extended longevity and minimal deflection
- 2.0 aluminum body rear IFP shock with 5/8" polished shaft
- 100% Bolt-on system - no drilling, cutting, or welding necessary for install
- ICON Vehicle Dynamics 2015-2020 Ford F-150 4WD suspension systems are designed with maximum performance and the serious driver in mind. ICON engineers’ primary focus is to increase wheel travel and damping ability, which translates into outstanding vehicle control and ride quality both on and off-road. The Stage 1 system includes vehicle-specific tuned 2.5” coilover shocks featuring an internal reservoir for exceptional cooling properties and ICON-engineered Eibach coil springs for superior vehicle “feel” through the range of travel. These coilovers are also height adjustable from 0-2.63” allowing the use of larger, more aggressive wheel and tire combinations. ICON 2.0 Aluminum Series monotube rear shocks utilize a vehicle-specific valving that balances the performance of the truck from front to rear. The ICON Vehicle Dynamics 2015-2020 F-150 4WD Stage 1 suspension system is an excellent choice for those drivers looking to enhance the capabilities of their pickup on the road as well as in the dirt.
Additional Fitment Information:
| Vehicle | Position | Sub Model | Drive Type |
|---|---|---|---|
| 2017 - Ford F-150 | Front and Rear | King Ranch | 4WD |
- 2015-2020 FORD F-150 4WD 0-2.63" STAGE 1 SUSPENSION SYSTEM
- 0 (in) - 2.63 (in) Lift
- 2015-2020 FORD F-150 4WD 0-2.63" LIFT STAGE 1 SUSPENSION SYSTEM
- 2015-2020 FORD F150 4WD 0-2.63" STAGE 1 SUSPENSION SYSTEM
- Product Attributes:
- California Proposition 65: Warning: This Product Contains Chemicals Known To The State Of California To Cause Cancer, And Birth Defects Or Other Reproductive Harm.
- Recommended Aftermarket Tires: 33" X 11.50" (larger Tires May Fit But Fender Trimming And Modifications Will Be Required.)
- Recommended Aftermarket Wheels:
- Icon Alloys | 17x8.5" W/ 5” Backspace / 6mm Offset
- Icon Alloys | 18x9" W/ 5.25" Backspace / 6mm Offset
- Icon Alloys | 20x9" W/ 5.625" Backspace / 16mm Offset
- Grade Type: Performance
- Mounting Hardware Included: Yes
- Bushings Included: No
- Spring Color: Black
- Maximum Lift: 2.63
- Title: 2015-2020 Ford F-150 4wd 0-2.63" Stage 1 Suspension System
- Coils Quantity Front: 2
- Spring Material: Steel
- Shocks Included: Yes
- OEM Wheels & Tires Fitment: Yes
-
Features:
- Increased wheel travel and ride quality over stock with no change in towing capacity
- Unique valving developed for the lighter weight of the 2015-2020 F-150
- Vehicle specific tuned front and rear shocks for superior damping and vehicle control
- Adjustable coilovers from 0-2.63" of lift height
- 6061 Aircraft grade aluminum CNC machined components
- Corrosion resistant CAD plated coilover shock body with 7/8 shaft
- High strength alloy CNC machined lower bar pin
- FK rod end bearings for extended longevity and minimal deflection
- 2.0 aluminum body rear IFP shock with 5/8" polished shaft
- 100% Bolt-on system - no drilling, cutting, or welding necessary for install
- ICON Vehicle Dynamics 2015-2020 Ford F-150 4WD suspension systems are designed with maximum performance and the serious driver in mind. ICON engineers’ primary focus is to increase wheel travel and damping ability, which translates into outstanding vehicle control and ride quality both on and off-road. The Stage 1 system includes vehicle-specific tuned 2.5” coilover shocks featuring an internal reservoir for exceptional cooling properties and ICON-engineered Eibach coil springs for superior vehicle “feel” through the range of travel. These coilovers are also height adjustable from 0-2.63” allowing the use of larger, more aggressive wheel and tire combinations. ICON 2.0 Aluminum Series monotube rear shocks utilize a vehicle-specific valving that balances the performance of the truck from front to rear. The ICON Vehicle Dynamics 2015-2020 F-150 4WD Stage 1 suspension system is an excellent choice for those drivers looking to enhance the capabilities of their pickup on the road as well as in the dirt.
Additional Fitment Information:
| Vehicle | Position | Sub Model | Drive Type |
|---|---|---|---|
| 2017 - Ford F-150 | Front and Rear | Lariat | 4WD |
Showing 1 - 10 of 494 products
Loading...