2023 GMC Yukon Suspension Parts
Image
Product
Price
- Rear Sway Bar Kit
- Stock Height.
- 1-1/4" Rear Sway Bar Kit GM 21-23 1500 SUV Suburban, Yukon, Denali, Tahoe, Escalade 2WD/4WD
- Sway Bars
- Product Attributes:
- Grade Type: Performance
- Bushing Color: Black
- Bushing Material: Polyurethane
- For your money, the best aftermarket investment you can make! Hellwig Sway Bars are an extremely effective handling upgrade you can make to your vehicle. Hellwig sway bars offer quick bolt on installation that are engineered to perform. An immediate improvement will be felt when you drive through the first corner with a Hellwig sway bar installed. Though most vehicles come equipped with factory installed sway bars, they are often insufficient for today?s load and tow demands. Hellwig sway bars feature larger than stock diameters and precision engineered components to optimize handling and reduce body roll.
Additional Fitment Information:
| Vehicle | Drive Type |
|---|---|
| 2023 - GMC Yukon | 4WD |
- Use Up To 33 (in) x 12.50 (in) Tires Raises Front 2.5 (in) - 3.25 (in) 0 (mm) Offset Aftermarket Wheels Recommended
- ICON's 2.5 Series coilover shocks are designed and built to give your vehicle outstanding performance off-road and a smooth ride on the street. These shocks are configured specifically for each application in both length and damping tune.
- 19-24 GM 1500 FRONT 2.5 VS IR COILOVER KIT
- Product Attributes:
- California Proposition 65: Warning: This Product Contains Chemicals Known To The State Of California To Cause Cancer, And Birth Defects Or Other Reproductive Harm.
- AAP_UDA_22: 1
- Cylinder Color: Silver
- Grade Type: Performance
- Active or Passive Suspension: Passive
- Self-Leveling: No
- Adjustable Compression: No
- AAP_UDA_4: 55
- Damping Type: Oil
- Maximum Lift: 3.5
- Adjustable Damping: No
- Adjustable: No
- Adjustable Rebound: No
- Material:
- Aluminum
- Steel
- Service Parts:
- 252001 - 2.5 Fixed Spanner Wrench
- 252002 - Universal Spanner Wrench (2.0/2.5/3.0)
- 252003 - Seal Install Tool 2.5/3.0
- 252004 - Economy Needle Charging Tool
- 252010 - 2.5 Ifp Rebuild Kit
- 254100g - 1 Gallon Icon Performance Shock Oil
- 257339 - 7/8 Shaft 13.25 Oal, 9.00 Travel
- 611019 - Coilover Hardware Kit Pair
- Shaft Diameter: 0.875
- AAP_UDA_12: Ea
- Dust Shield: No
- Cylinder Finish: Cadmium Plated
- Recommended Aftermarket Tires:
- (sierra) 305/70r17 (larger Tires May Fit But Fender Trimming And Modifications Will Be Required)
- (silverado) 315/70r17 (larger Tires May Fit But Fender Trimming And Modifications Will Be Required)
- Upper Mount Type: Mounting Plate
- Coil Over Springs Included: Yes
- Recommended Aftermarket Wheels:
- Icon Alloys - 17x8.5" W/ 4.75” Backspace / 0mm Offset
- Icon Alloys - 18x9" W/ 5” Backspace / 0mm Offset
- Icon Alloys - 20x9" W/ 5” Backspace / 0mm Offset
- Body Diameter: 2.5
- Gas Charged: Yes
- Cylinder Material: Steel
- Internal Construction Type: Single Tube
- Spring Rate Type: Linear
- California Prop 65 Warning: Yes
- Boot Included: No
- Lower Mount Type: Bar Pin
- Shock Absorber Rod End Measuring Point: Flat On Bar Pin
- Adjustable Height: Yes
- Valving Type: Digressive
- Dust Shield Included: No
- Shock Absorber Body End Measuring Point: Top Of Upper Mount Plate
- Minimum Lift: 0
- Spring Material: Steel
- OEM Wheels & Tires Fitment: Yes
- Remote Reservoir: No
-
Features:
- 6061 Aircraft grade aluminum CNC machined components
- PTFE lined spherical bearings for extended longevity and minimal deflection
- High strength alloy CNC machined lower bar pin and application specific mounting hardware
- Fully rebuildable and re-tunable
- Increased front wheel travel and improved ride quality over stock
- Vehicle specific tuned for superior shock damping and control
- Adjustable coilovers yield 1.5-3.5” or 2.5-3.25" of front lift height over stock, depending on vehicle
- Internal nitrogen reservoir ensures consistent performance under hard use
- ICON engineered coil springs
- Corrosion resistant CAD plated 2.5” diameter shock bodies
- 7/8" diameter hardened chrome plated shafts
- ICON Vehicle Dynamics V.S. Series 2.5” coilover shocks are an incredible upgrade for the front-end of 2019-2024 Chevrolet Silverado 1500/GMC Sierra 1500 trucks and 2021-2023 Chevrolet Tahoe & Suburban/GMC Yukon & Yukon XL SUVs. Their longer length offers an increase in total front wheel travel compared to stock, for a total of 9” front wheel travel (a 20% increase over stock) while still being compatible with the stock front upper control arms. ICON’s Vehicle-specific valving provides a sport tuned feel on and off-road while 1.5-3.5” of lift height adjustability on pickup trucks or 2.5-3.25” of lift height adjustability on SUVs, allows the use of larger, more aggressive wheel and tire combinations. The larger 2.5” diameter shock body and increased piston area over stock components provides improved damping ability and outstanding ride characteristics across varying types of terrain. When paired with ICON rear 2.0 Aluminum Series or 2.5 Series shocks vehicle control will be balanced front to rear, resulting in the best overall driving experience for your GM pickup truck or SUV.
Additional Fitment Information:
| Vehicle | Position | Fuel Type | Sub Model |
|---|---|---|---|
| 2023 - GMC Yukon | Front | GAS | SLT |
- Use Up To 33 (in) x 12.50 (in) Tires Raises Front 2 (in) - 2.75 (in) 0 (mm) Offset Aftermarket Wheels Recommended
- ICON's 2.5 Series coilover shocks are designed and built to give your vehicle outstanding performance off-road and a smooth ride on the street. These shocks are configured specifically for each application in both length and damping tune.
- 19-24 GM 1500 FRONT 2.5 VS IR COILOVER KIT
- Product Attributes:
- California Proposition 65: Warning: This Product Contains Chemicals Known To The State Of California To Cause Cancer, And Birth Defects Or Other Reproductive Harm.
- AAP_UDA_22: 1
- Cylinder Color: Silver
- Grade Type: Performance
- Active or Passive Suspension: Passive
- Self-Leveling: No
- Adjustable Compression: No
- AAP_UDA_4: 55
- Damping Type: Oil
- Maximum Lift: 3.5
- Adjustable Damping: No
- Adjustable: No
- Adjustable Rebound: No
- Material:
- Aluminum
- Steel
- Service Parts:
- 252001 - 2.5 Fixed Spanner Wrench
- 252002 - Universal Spanner Wrench (2.0/2.5/3.0)
- 252003 - Seal Install Tool 2.5/3.0
- 252004 - Economy Needle Charging Tool
- 252010 - 2.5 Ifp Rebuild Kit
- 254100g - 1 Gallon Icon Performance Shock Oil
- 257339 - 7/8 Shaft 13.25 Oal, 9.00 Travel
- 611019 - Coilover Hardware Kit Pair
- Shaft Diameter: 0.875
- AAP_UDA_12: Ea
- Dust Shield: No
- Cylinder Finish: Cadmium Plated
- Recommended Aftermarket Tires:
- (sierra) 305/70r17 (larger Tires May Fit But Fender Trimming And Modifications Will Be Required)
- (silverado) 315/70r17 (larger Tires May Fit But Fender Trimming And Modifications Will Be Required)
- Upper Mount Type: Mounting Plate
- Coil Over Springs Included: Yes
- Recommended Aftermarket Wheels:
- Icon Alloys - 17x8.5" W/ 4.75” Backspace / 0mm Offset
- Icon Alloys - 18x9" W/ 5” Backspace / 0mm Offset
- Icon Alloys - 20x9" W/ 5” Backspace / 0mm Offset
- Body Diameter: 2.5
- Gas Charged: Yes
- Cylinder Material: Steel
- Internal Construction Type: Single Tube
- Spring Rate Type: Linear
- California Prop 65 Warning: Yes
- Boot Included: No
- Lower Mount Type: Bar Pin
- Shock Absorber Rod End Measuring Point: Flat On Bar Pin
- Adjustable Height: Yes
- Valving Type: Digressive
- Dust Shield Included: No
- Shock Absorber Body End Measuring Point: Top Of Upper Mount Plate
- Minimum Lift: 0
- Spring Material: Steel
- OEM Wheels & Tires Fitment: Yes
- Remote Reservoir: No
-
Features:
- 6061 Aircraft grade aluminum CNC machined components
- PTFE lined spherical bearings for extended longevity and minimal deflection
- High strength alloy CNC machined lower bar pin and application specific mounting hardware
- Fully rebuildable and re-tunable
- Increased front wheel travel and improved ride quality over stock
- Vehicle specific tuned for superior shock damping and control
- Adjustable coilovers yield 1.5-3.5” or 2.5-3.25" of front lift height over stock, depending on vehicle
- Internal nitrogen reservoir ensures consistent performance under hard use
- ICON engineered coil springs
- Corrosion resistant CAD plated 2.5” diameter shock bodies
- 7/8" diameter hardened chrome plated shafts
- ICON Vehicle Dynamics V.S. Series 2.5” coilover shocks are an incredible upgrade for the front-end of 2019-2024 Chevrolet Silverado 1500/GMC Sierra 1500 trucks and 2021-2023 Chevrolet Tahoe & Suburban/GMC Yukon & Yukon XL SUVs. Their longer length offers an increase in total front wheel travel compared to stock, for a total of 9” front wheel travel (a 20% increase over stock) while still being compatible with the stock front upper control arms. ICON’s Vehicle-specific valving provides a sport tuned feel on and off-road while 1.5-3.5” of lift height adjustability on pickup trucks or 2.5-3.25” of lift height adjustability on SUVs, allows the use of larger, more aggressive wheel and tire combinations. The larger 2.5” diameter shock body and increased piston area over stock components provides improved damping ability and outstanding ride characteristics across varying types of terrain. When paired with ICON rear 2.0 Aluminum Series or 2.5 Series shocks vehicle control will be balanced front to rear, resulting in the best overall driving experience for your GM pickup truck or SUV.
Additional Fitment Information:
| Vehicle | Position | Fuel Type | Sub Model |
|---|---|---|---|
| 2023 - GMC Yukon | Front | DIESEL | SLT |
- Up to 33x12.50 (in) Tire with Minor Fender Trimming with 2 (in) - 3.25 (in) Suspension Lift 0 (mm) Offset Aftermarket Wheels Recommended
- ICON tubular upper control arms feature 1026 DOM tube construction, polyurethane bushings, and ICON’s Delta Joint, a hardcore high-angle ball joint that combines the durability of a ball joint with the performance of a traditional uniball.
- 19-24 GM 1500 TUBULAR UCalifornia DJ KIT
- Product Attributes:
- California Proposition 65: Warning: This Product Contains Chemicals Known To The State Of California To Cause Cancer, And Birth Defects Or Other Reproductive Harm.
- AAP_UDA_22: 1
- Ball Joint Included: Yes
- Grade Type: Performance
- Mounting Hardware Included: Yes
- Quantity: Pair
- Bushing Color: Black
- End 1 Type: Bushing
- Control Arm Material: Dom Steel
- Finish: Powdercoated
- AAP_UDA_4: 55
- Control Arm Construction: Tubular
- Ball Joint Stud Type: Threaded
- End 2 Type: Ball Joint
- Adjustable: No
- Suspension Grade Type: Performance
- Ball Joint Mounting Type: Press In
- Control Arm Color: Black
- Adjustable Control Arm: No
- Suspension Type:
- Air
- Spring
- Bushing Material: Polyurethane
- Material: Dom Steel
- Service Parts:
- 614519 - Delta Joint Install Press Adapter Tube
- 614523 - 78620dj Replacement Bushing And Sleeve Kit
- AAP_UDA_12: Ea
- Mounting Bracket Included: No
- California Prop 65 Warning: Yes
- Grease Fitting Included: Yes
- Pre-Greased: No
- Construction: Tubular
- Reinforced: Yes
-
Features:
- ICON Delta Joint
- 1026 DOM Steel Construction
- CNC Bent Tubing
- Serviceable Dual Stage Bushings
- CNC Machined Bushing Housings and Sleeves
- Built-In Caster Correction
- Black Semi-Gloss Powder Coat Finish
- Take the performance of your 2019-2024 GM Silverado/Sierra 1500 pickup or 2021-2023 GM SUV to new levels with the ICON Vehicle Dynamics Delta Joint tubular upper control arm kit. All ICON tubular upper control arms are constructed from CNC bent 1026 DOM steel tubing and then powder coated to a semi-gloss black finish for maximum strength and corrosion resistance. ICON upper control arms are engineered with built-in caster correction for optimal alignment specifications and confidence inspiring handling. A main benefit of ICON upper control arms is the potential for increased wheel travel when paired with our 2.5 Series coilovers, translating into superior performance and ride quality for your vehicle. These upper control arms feature ICON's patented Delta Joint. The Delta Joint is a heavy-duty high angle ball joint that combines the durability of a ball joint with the performance characteristics of a traditional uniball. While the industry standard uniball does a great job of allowing the control arms of a vehicle to articulate with little bind, they do have an inherent weakness that leaves more to be desired when used in a daily driven application - exposure to the elements. The Delta Joint features a zinc plated housing providing the first layer of corrosion resistance, while a tough grease seal keeps potentially harmful elements out of the inner workings of the joint. Metal on metal construction and a greaseable design increase the longevity of the Delta Joint while at the same time allowing for noise-free operation. What makes the Delta Joint unique is that it brings the best of both worlds to ICON upper control arms with features that make it more robust than a uniball, and at the same time capable of greater angularity than a typical ball joint.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2023 - GMC Yukon | Front Upper |
- Up to 33x12.50 (in) Tire with Minor Fender Trimming with 0 (in) - 3.25 (in) Suspension Lift Requires Trimming of Upper Control Arm Droop Stops 0 (mm) Offset Aftermarket Wheels Recommended
- ICON billet upper control arms feature 6061 aluminium construction, PTFE lined rodends, and ICON’s Delta Joint, a hardcore high-angle ball joint that combines the durability of a ball joint with the performance of a traditional uniball.
- 19-24 GM 1500 BILLET UCalifornia DJ KIT
- Product Attributes:
- California Proposition 65: Warning: This Product Contains Chemicals Known To The State Of California To Cause Cancer, And Birth Defects Or Other Reproductive Harm.
- AAP_UDA_22: 1
- Ball Joint Included: Yes
- Grade Type: Performance
- Mounting Hardware Included: Yes
- Quantity: Pair
- Bushing Color: Silver
- End 1 Type: Rod End Bearing
- Control Arm Material: Aluminum
- Finish: Anodized
- AAP_UDA_4: 55
- Control Arm Construction: Billet
- Ball Joint Stud Type: Threaded
- End 2 Type: Ball Joint
- Adjustable: Yes
- Suspension Grade Type: Performance
- Ball Joint Mounting Type: Press In
- Control Arm Color: Silver
- Adjustable Control Arm: Yes
- Suspension Type:
- Air
- Spring
- Bushing Material: Rod End Bearing
- Material: Aluminum
- Service Parts: 614519 - Delta Joint Install Press Adapter Tube
- AAP_UDA_12: Ea
- Mounting Bracket Included: No
- California Prop 65 Warning: Yes
- Grease Fitting Included: Yes
- Pre-Greased: No
- Construction: Billet
- Reinforced: Yes
-
Features:
- CNC machined 6061 billet aluminum construction for light weight and exceptional strength
- Features ICON's Patented Delta Joint (U.S. Patent No. 10,731,700)
- Camber and caster adjustability allows for precise wheel alignment
- ICON double adjuster sleeves allow for on-vehicle adjustment
- Vehicle specific taper pin provides OE-like fitment
- PTFE Lined 7/8” FK Rod Ends for improved response
- Built in o-ring sealed dust cover cap
- These upper control arms feature ICON's patented Delta Joint. The Delta Joint is a heavy-duty high angle ball joint that combines the durability of a ball joint with the performance characteristics of a traditional uniball. While the industry standard uniball does a great job of allowing the control arms of a vehicle to articulate with little bind, they do have an inherent weakness that leaves more to be desired when used in a daily driven application - exposure to the elements. The Delta Joint features a zinc plated housing providing the first layer of corrosion resistance, while a tough grease seal keeps potentially harmful elements out of the inner workings of the joint. Metal on metal construction and a greaseable design increase the longevity of the Delta Joint while at the same time allowing for noise-free operation. What makes the Delta Joint unique is that it brings the best of both worlds to ICON upper control arms with features that make it more robust than a uniball, and at the same time capable of greater angularity than a typical ball joint.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2023 - GMC Yukon | Front Upper |
- Front And Rear Street Performance Struts
- BQ: Will not work with mag ride vehicles. CB: Part number 25121 required when going lower than 2" Lowering Rate: F: 0.0-2.0" / R: 1.0-2.0"
- Made up of a variety of combinations of our individual lowering components as well as all the installation and alignment pieces necessary to achieve the listed lowering, choosing your kit has never been simpler.
-
Features:
- Lower your Sport Truck or SUV right the first time. Belltech complete lowering kits include all the parts and pieces you need to achieve not only the look you WANT, but the alignment, and performance & safety you NEED
- Made up of a variety of combinations of our individual lowering components as well as all the installation and alignment pieces necessary to achieve the listed lowering, choosing your kit has never been simpler.
- Kit includes Street Performance struts
- Lower your Sport Truck or SUV right the first time. Belltech Street Performance complete lowering kits include all the parts, pieces and shock absorbers you need to achieve not only the look you WANT, but the ride quality, performance & safety you NEED. Belltech engineers have reviewed the most popular setups for each Sport Truck or SUV in our application range and developed the Belltech Complete Kit Line to simplify your purchase. These complete lowering kits are your all in one box solution. Made up of a variety of combinations of our individual lowering components as well as all the grade 8 installation hardware and alignment pieces necessary to achieve the advertised lowering amount, choosing your kit has never been simpler.
Additional Fitment Information:
| Vehicle | Region | Sub Model |
|---|---|---|
| 2023 - GMC Yukon | United States | SLE |
- STREET PERFORMANCE (FRONT, LOWERED)
- Lowering Rate: F: 0.0-2.0"
- Shocks features include: Height adjustability, Hardened Chrome 18mm piston rods, Triple lip NBR rod seal, Teflon guide bushing, 35mm pistons with low friction Teflon seals, 51mm wide body for increased oil volume & OEM quality rubber bushings
-
Features:
- Ride Height adjustable
- Independent performance tuned 35mm compression and rebound valves
- 18mm piston rods
- 50mm shock bodies
- Progressive rate Polymer bumpstops
- Application specific (Non universal)
- Belltech Street Performance Lowering Front Struts are designed as a performance replacement for today's Strut equipped Trucks and SUV's. In true Belltech style, the Street Performance Lowering Struts not only provide the performance & safety that you can only get from Belltech but offers the installer the choice on the amount of drop desired from one-part number. Thanks to our patented ring and perch system, you now have the ability to choose from oem stock height to as much as 3
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
Additional Fitment Information:
| Vehicle | Block | CC | Doors | Bed | Region | Engine | Body | Drive Type | Position | Bed Length | Sub Model | CID |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 2023 - GMC Yukon | V | 5328 | 4 | N/R | United States | 8 Cyl 5.3L | Sport Utility | 4WD | Front | N/R | SLE | 325 |
- 2" Drop Spindle Set
- BB: Minimum Wheel size 20" Lowering Rate: F: 2.0"
- The industry standard, Belltech drop spindles can be combined with coilover or air suspension set ups for the ultimate in street performance or frame laying stance. Lifetime warranty, direct bolt in, application specific.
-
Features:
- 2" Drop
- Direct bolt in
- Uses factory ball joints and tie rod ends
- Maintains factory suspension geometry and alignment
- Maintain factory ride quality
- In 1983, Belltech developed one of the industry's first revolutionary products to help jump start the Sport Truck craze, the Drop Spindle. By relocating the spindle pin (Note: Application, while improving handling and retaining factory ride quality. Belltech spindles maintain critical suspension geometry and eliminate excessive ball joint, shock and tire wear common to other methods of lowering. Each spindle is crafted from powdercoated, CNC machined, high strength ductile iron castings providing the structural integrity to meet and exceed all factory specifications & requirements.
Additional Fitment Information:
| Vehicle | Region | Sub Model |
|---|---|---|
| 2023 - GMC Yukon | United States | SLE |
- TRAIL PERFORMANCE (REAR, LIFTED)
- Lowering Rate: R: 0.0-2.0"
- Shocks features include: Height adjustability, Hardened Chrome 18mm piston rods, Triple lip NBR rod seal, Teflon guide bushing, 35mm pistons with low friction Teflon seals, 51mm wide body for increased oil volume & OEM quality rubber bushings
-
Features:
- Ride Height adjustable
- Independent performance tuned 35mm compression and rebound valves
- 18mm piston rods
- 50mm shock bodies
- Progressive rate Polymer bumpstops
- Application specific (Non universal)
- Belltech Trail Performance Lift Rear Struts are designed as a Performance replacement for today's Strut equipped Trucks and SUV's. In true Belltech style, the Trail Performance Lift Struts not only provide the Performance & safety that you can only get from Belltech but offers the installer the choice on the amount of lift desired from one-part number. Thanks to our patented ring and perch system, you now have the ability to choose from oem stock height to as much as 3" of lift in half inch increments. The Trail Performance lift strut lineup has been engineered to provide a premium ride quality for today's trucks and SUV's. By focusing their attention on the low speed compression and rebound characteristics, the Belltech engineers have developed a great balance between comfort for your everyday commute and overall Performance for those spirited drives or offroad adventures.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
Additional Fitment Information:
| Vehicle | Block | CC | Doors | Bed | Region | Engine | Body | Drive Type | Position | Bed Length | Sub Model | CID |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 2023 - GMC Yukon | L | 2993 | 4 | N/R | United States | 6 Cyl 3.0L | Sport Utility | 4WD | Rear | N/R | SLE | 183 |
- B8 5100 (Ride Height Adjustable) - Suspension Shock Absorber
- Provides 0-1.8" Rear Lift
- 46mm Monotube Shock Absorber
- B8 5100 (Ride Height Adjustable)
- Product Attributes:
- Internal Design: Monotube
- Upper Mount Type: Stem
- Extended Length (MM): 571.4
- Reservoir: No
- Segment: Light Truck
- Body Design: Snap Ring Grooved Body (coilover)
- Spring Seat Included: Yes
- PartType: Shocks / Struts
- Collapsed Length (MM): 384.0
- Boot Included: No
- Lower Mount Type: Eye 14.1mm
- Adjustable Damping: Non-adjustable
- Body Diameter (ID): 46mm
- Prop 65 (Y/N): Y
-
Features:
- 46mm monotube design ensures consistent, fade-free performance in all conditions
- Adjustable spring seat offers 0-2.75in of lift, depending on the application
- Practical alternative to coil spring spacers, with the benefit of Bilstein monotube technology
- Bilstein B8 5100 (Ride Height Adjustable) shock absorbers are designed for trucks and SUVs with a front OE coilover style suspension. Multiple snap-ring grooves in the body allow for different spring seat positions, providing 0-3 inches of front lift with OE springs (depending on application). The monotube shock absorbers feature a 46mm digressive piston a with self-adjusting deflective disc valve setting. Bilstein B8 5100 (Ride Height Adjustable) shock absorbers provide increased wheel travel and improved handling. Utilizing a B8 5100 (Ride Height Adjustable) shock absorber is the easiest way to level out your vehicle.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
84844870, 84844871, 84844873, 84844874, 84844875
Additional Fitment Information:
| Vehicle | Position | Sub Model |
|---|---|---|
| 2023 - GMC Yukon | Rear | SLE |
Showing 1 - 10 of 19 products
Loading...