2023 Jeep Wrangler Suspension Parts
Choose your Part Name for your 2023 Jeep Wrangler
Air Suspension Compressor Kit
Air Suspension Helper Spring
Alignment Cam Bolt
Coil Spring Set
Jounce Bumper
Suspension Control Arm
Suspension Control Arm Bracket
Suspension Control Arm Link
Suspension Leveling Kit
Suspension Lift Kit
Suspension Shock Absorber
Suspension Shock Absorber Conversion Kit
Suspension Shock Absorber Extender
Suspension Stabilizer Bar Hardware Kit
Suspension Stabilizer Bar Link Kit
Suspension Track Bar
Suspension Track Bar Bracket
Image
Product
Price
- Coil Capacity Increase 15-30 Percent; Fill Out Coil SumoSprings Inspection before Ordering; Do Not Exceed GVWR; Inner Wall Height 0.94 in.
- Coil SumoSprings; Coil Capacity Increase 15-30 Percent; Fill Out Coil SumoSprings Inspection before Ordering; Do Not Exceed GVWR; Inner Wall Height 0.94 in.;
- Coil SumoSprings
-
Features:
- Sold as a pair left and right
- Requires no maintenance
- Proudly made in the U.S.A.
- Fit Both Front And Rear Coil Springs
- Coil SumoSprings Simply Slide Between The Turns Of Coil Springs
- Enhance Front Suspension When Fitting Snow Plow/Winch/Bumper
- Enhance Rear Suspension When Adding Tow Hitch
- Reduces Side To Side Body Roll And Front End Dip
- Produced From SumoSprings Closed Cell Microcellular Urethane
- Progressive Spring Rate
- Coil Capacity Increased By 15 To 30 Percent
- Typical Installation Completed In Less Than 30 Minutes
- Never Load Any Vehicle Beyond The Manufacturers GVWR
- Coil SumoSprings(R) improve the load leveling ability of original equipment front and rear coil springs. Manufactured from micro-cellular urethane, the material's progressive spring rate creates a cushion effect, enhancing capacity and ride comfort. They install by simply being slid between the turns of the coil spring.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2023 - Jeep Wrangler | Front |
- B8 5100-Shock Absorber
- For Rear Lifted Height: 2-3"
- 46mm Monotube Shock Absorber
- B8 5100
- Product Attributes:
- California Proposition 65: Warning: Cancer & Reproductive Harm - Www.p65warnings.ca.gov
- Internal Design: Monotube
- Collapsed Length:
- 18.330 In.
- 465.5mm
- Upper Mount Type: Eye 12.8mm
- Extended Length (MM): 746.2
- Reservoir: No
- Body Inside Diameter: 46mm
- WARNING CA Proposition 65: Yes
- Body Design: Smooth Body (non-coilover)
- Spring Seat Included: No
- WARNING CA Proposition 65 Message: Warning: Cancer & Reproductive Harm - Www.p65warnings.ca.gov
- Reservoir Included: No
- Collapsed Length (MM): 465.5
- Boot Included: Black Bellows
- Lower Mount Type: Eye 12.8mm
- Adjustable Damping: Non-adjustable
- Extended Length:
- 29.380 In.
- 746.2mm
- Body Diameter (ID): 46mm
-
Features:
- Designed As A Direct Fit Solution For Lifted Trucks And SUVs
- Monotube Design Which Provides Consistent Fade Free Performance
- Tuned For Each Application To Assure Optimal Performance
- Offer A Significant Improvement In Ride Quality/Handling/Comfort
- Bilstein B8 5100 shock absorbers are designed as a direct fit solution for lifted trucks and SUV's. These shock absorbers feature a monotube design which provides consistent fade free performance. B8 5100 shock absorbers utilize a unique, velocity sensitive, digressive piston which reacts to changing road conditions. All B8 5100 shock absorbers are tuned for each specific application to assure optimal performance is achieved. B8 5100 shock absorbers offer a significant improvement in ride quality, handling, and comfort.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
Additional Fitment Information:
| Vehicle | Position | Sub Model |
|---|---|---|
| 2023 - Jeep Wrangler | Rear | Rubicon |
- B8 5160 - Suspension Shock Absorber
- For Rear Lifted Height: 2-3"
- 46mm Monotube Shock Absorber
- B8 5160
- Product Attributes:
- California Proposition 65: Warning: Cancer & Reproductive Harm - Www.p65warnings.ca.gov
- Internal Design: Monotube
- Upper Mount Type: Eye 12.8mm
- Extended Length (MM): 746.2
- Reservoir: Yes
- Billet Reservoir Clamp Included: Yes
- Body Design: Smooth Body (non-coilover)
- Spring Seat Included: No
- Collapsed Length (MM): 442.0
- Boot Included: No
- Lower Mount Type: Eye 12.8mm
- Adjustable Damping: Non-adjustable
- Body Diameter (ID): 46mm
- Bilstein B8 5160 remote reservoir shock absorbers are designed as a direct fit solution for lifted trucks and SUV’s. The remote reservoir will offer increased cooling capacity and wheel travel to optimize overall performance compared to a traditional shock absorber. These shock absorbers feature a monotube design for consistent fade free performance and utilize velocity sensitive digressive valve settings which are tuned for each specific application. Each shock absorber is fitted with a unique 360 degree swivel banjo hose fitting, providing a clean, low profile installation. B8 5160 remote reservoir shock absorbers will increase overall durability of your vehicle allowing you to conquer the harshest of off-road environments.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
25-287523
Additional Fitment Information:
| Vehicle | Position | Sub Model |
|---|---|---|
| 2023 - Jeep Wrangler | Rear | Rubicon |
- B8 5160 - Suspension Shock Absorber
- For Front Lifted Height: 3-4.5" Requires appropriate bump stop extensions and aftermarket driveshaft
- 46mm Monotube Shock Absorber
- B8 5160
- Product Attributes:
- California Proposition 65: Warning: Cancer & Reproductive Harm - Www.p65warnings.ca.gov
- Internal Design: Monotube
- Upper Mount Type: Eye 12.8mm
- Extended Length (MM): 746.2
- Reservoir: Yes
- Billet Reservoir Clamp Included: Yes
- Body Design: Smooth Body (non-coilover)
- Spring Seat Included: No
- Collapsed Length (MM): 436.5
- Boot Included: No
- Lower Mount Type: Eye 12.8mm
- Adjustable Damping: Non-adjustable
- Body Diameter (ID): 46mm
- Bilstein B8 5160 remote reservoir shock absorbers are designed as a direct fit solution for lifted trucks and SUV’s. The remote reservoir will offer increased cooling capacity and wheel travel to optimize overall performance compared to a traditional shock absorber. These shock absorbers feature a monotube design for consistent fade free performance and utilize velocity sensitive digressive valve settings which are tuned for each specific application. Each shock absorber is fitted with a unique 360 degree swivel banjo hose fitting, providing a clean, low profile installation. B8 5160 remote reservoir shock absorbers will increase overall durability of your vehicle allowing you to conquer the harshest of off-road environments.
This Part Fits the Following OEM/Substitute Numbers:
25-297812
Additional Fitment Information:
| Vehicle | Position | Sub Model |
|---|---|---|
| 2023 - Jeep Wrangler | Front Right | Rubicon |
- B8 5160 - Suspension Shock Absorber
- For Front Lifted Height: 2-3"
- 46mm Monotube Shock Absorber
- B8 5160
- Product Attributes:
- California Proposition 65: Warning: Cancer & Reproductive Harm - Www.p65warnings.ca.gov
- Internal Design: Monotube
- Upper Mount Type: Eye 12.8mm
- Extended Length (MM): 682.7
- Reservoir: Yes
- Billet Reservoir Clamp Included: Yes
- Body Design: Smooth Body (non-coilover)
- Spring Seat Included: No
- Collapsed Length (MM): 416.0
- Boot Included: No
- Lower Mount Type: Eye 12.8mm
- Adjustable Damping: Non-adjustable
- Body Diameter (ID): 46mm
- Bilstein B8 5160 remote reservoir shock absorbers are designed as a direct fit solution for lifted trucks and SUV’s. The remote reservoir will offer increased cooling capacity and wheel travel to optimize overall performance compared to a traditional shock absorber. These shock absorbers feature a monotube design for consistent fade free performance and utilize velocity sensitive digressive valve settings which are tuned for each specific application. Each shock absorber is fitted with a unique 360 degree swivel banjo hose fitting, providing a clean, low profile installation. B8 5160 remote reservoir shock absorbers will increase overall durability of your vehicle allowing you to conquer the harshest of off-road environments.
This Part Fits the Following OEM/Substitute Numbers:
25-287516
Additional Fitment Information:
| Vehicle | Position | Sub Model |
|---|---|---|
| 2023 - Jeep Wrangler | Front Left | Rubicon |
- B8 5100 - Suspension Shock Absorber
- For Front Lifted Height: 3-4.5" Requires appropriate bump stop extensions and aftermarket driveshaft
- 46mm Monotube Shock Absorber
- B8 5100
- Product Attributes:
- California Proposition 65: Warning: Cancer & Reproductive Harm - Www.p65warnings.ca.gov
- Internal Design: Monotube
- Upper Mount Type: Eye 12.8mm
- Extended Length (MM): 722.0
- Reservoir: No
- Body Design: Smooth Body (non-coilover)
- Spring Seat Included: No
- Collapsed Length (MM): 465.0
- Boot Included: No
- Lower Mount Type: Eye 12.8mm
- Adjustable Damping: Non-adjustable
- Body Diameter (ID): 46mm
- Bilstein B8 5100 shock absorbers are designed as a direct fit solution for lifted trucks and SUV’s. These shock absorbers feature a monotube design which provides consistent fade free performance. B8 5100 shock absorbers utilize a unique, velocity sensitive, digressive piston which reacts to changing road conditions. All B8 5100 shock absorbers are tuned for each specific application to assure optimal performance is achieved. B8 5100 shock absorbers offer a significant improvement in ride quality, handling, and comfort.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
Additional Fitment Information:
| Vehicle | Position | Sub Model |
|---|---|---|
| 2023 - Jeep Wrangler | Front | Rubicon |
- B8 5160 - Suspension Shock Absorber
- For Rear Lifted Height: 3-4.5" Requires appropriate bump stop extensions
- 46mm Monotube Shock Absorber
- B8 5160
- Product Attributes:
- California Proposition 65: Warning: Cancer & Reproductive Harm - Www.p65warnings.ca.gov
- Internal Design: Monotube
- Upper Mount Type: Eye 12.8mm
- Extended Length (MM): 809.2
- Reservoir: Yes
- Billet Reservoir Clamp Included: Yes
- Body Design: Smooth Body (non-coilover)
- Spring Seat Included: No
- Collapsed Length (MM): 475.5
- Boot Included: No
- Lower Mount Type: Eye 12.8mm
- Adjustable Damping: Non-adjustable
- Body Diameter (ID): 46mm
- Bilstein B8 5160 remote reservoir shock absorbers are designed as a direct fit solution for lifted trucks and SUV’s. The remote reservoir will offer increased cooling capacity and wheel travel to optimize overall performance compared to a traditional shock absorber. These shock absorbers feature a monotube design for consistent fade free performance and utilize velocity sensitive digressive valve settings which are tuned for each specific application. Each shock absorber is fitted with a unique 360 degree swivel banjo hose fitting, providing a clean, low profile installation. B8 5160 remote reservoir shock absorbers will increase overall durability of your vehicle allowing you to conquer the harshest of off-road environments.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
25-287547
Additional Fitment Information:
| Vehicle | Position | Sub Model |
|---|---|---|
| 2023 - Jeep Wrangler | Rear | Rubicon |
- 6 in. Lift; Front; w/6 in. Lift
- Adjustable Vertex Shocks; 6 in. Lift; Front;
- Adjustable Vertex Shocks
- Product Attributes:
- Collapsed Length: 18.350 In.
- Shock Stroke: 11.660 In.
- WARNING CA Proposition 65: No
- Extended Length: 30.000 In.
-
Features:
- Extended Length: 33.07in
- Collapsed Length: 19.92in
- Includes Driver And Passenger Side Front Coilovers
- 8-Stage Adjustable Damping
- Monotube Design
- Remote Reservoir With Steel Braided Reservoir Line
- 22mm Chrome-hardened Piston Rod
- Specifically Tuned For Each Application
- 3-stage Seal System
- Heat-Treated Alloy Bearing
- CNC-Machined Billet Aluminum Accents
- 3-Year Manufacturers Warranty
- Behold: The pinnacle of off-road performance and smooth ride quality in an affordable package has arrived with Rough Countrys 2.5 Vertex 8-Stage Adjustable Reservoir Shocks. These high-performance reservoir shocks offer an elite ride-quality in every situation you face, with an 8-stage adjustable damping system that lets you perfectly dial-in your ride for whatever lies ahead. Whether you want a smooth ride for city streets or the ultimate damping for off-road mayhem, a quick spin of the dial lets you adjust each shock to the exact performance specifications you desire.Rough Countrys Nitrogen-charged Vertex Shocks feature a monotube design with an external reservoir for increased oil capacity and damping sensitivity. Each shock features a massive 2.5in diameter piston and a high-flow 22mm chrome hardened piston rod that simply dwarfs the competition. When it comes to investing in a high-end shock, youll be pleased to find that Rough Countrys 2.5in piston design is beefier and offers an impressive 56% greater fluid capacity than the average reservoir shock.A 3-stage, fortified seal system ensures your Vertex shocks keep kicking while the beautifully designed honed steel body offers a long lifespan of reliable performance and killer good looks. This shock is designed to be a true eye-catcher, with a beautiful silver finish, laser-etched RC logo, matching in.Vertex in. decals, and CNC-machined Billet Aluminum accents. Rear shocks feature a durable bracket system with laser-etched logo and a premium braided steel reservoir line.Includes an Industry-leading 3-year Warranty!
Additional Fitment Information:
| Vehicle | Position | Sub Model |
|---|---|---|
| 2023 - Jeep Wrangler | Front | Unlimited Willys 4xe |
- Off Road; Solo Kits Are Replacements To Factory Bump Stops; Capacity 1400 lbs. At 50 Percent Compression; Do Not Exceed GVWR; No Drill Required
- SumoSprings; Off Road; Solo Kits Are Replacements To Factory Bump Stops; Capacity 1400 lbs. At 50 Percent Compression; Do Not Exceed GVWR; No Drill Required;
- SumoSprings
- Product Attributes:
- Max Load: 1400 Lbs.
-
Features:
- Sold as a pair left and right
- Requires no maintenance
- Proudly made in the U.S.A.
- Enhances Load Carrying Ability
- 1400 Pounds Capacity At 50 Pct Compression
- Reduces And Stabilizes Sway
- Improves Overall Driver Control And Ride Comfort
- Compress Up To 80 Pct Original Height With Full Memory Rebound
- One Pc. On One Side As Replacement/Upgrade To Fact. Bump Stops
- Progressive Spring Rate
- Made From Proprietary And Patented Microcellular Urethane
- Worlds Only Leak Proof Air Spring
- Never Load Any Vehicle Beyond The Manufacturers GVWR
- SumoSprings(R) are a patented suspension product designed to enhance load carrying ability, stabilize sway, and improve overall driver control and ride comfort. They are maintenance free, do not leak air, and do not require airlines or compressors. SumoSprings(R) are manufactured in a variety of heights, diameters and densities to support multiple front and rear applications. They are manufactured from proprietary closed micro-cellular urethane providing a smooth and progressive spring rate.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2023 - Jeep Wrangler | Front |
- Solo Kits Are Replacements To Factory Bump Stops; Capacity 1000 lbs. At 50 Percent Compression; Do Not Exceed GVWR; No Drill Required; For Use w/Lifted Vehicles
- SumoSprings; Solo Kits Are Replacements To Factory Bump Stops; Capacity 1000 lbs. At 50 Percent Compression; Do Not Exceed GVWR; No Drill Required; For Use w/Lifted Vehicles;
- SumoSprings
- Product Attributes:
- Max Load: 1000 Lbs.
-
Features:
- Sold as a pair left and right
- Requires no maintenance
- Proudly made in the U.S.A.
- Enhances Load Carrying Ability
- 2500 Pounds Capacity At 50 Percent Compression
- Reduces And Stabilizes Sway
- Improves Overall Driver Control And Ride Comfort
- Compress Up To 80 Pct Original Height With Full Memory Rebound
- One Pc. On One Side As Replacement/Upgrade To Fact. Bump Stops
- Progressive Spring Rate
- Made From Proprietary And Patented Microcellular Urethane
- Worlds Only Leak Proof Air Spring
- Never Load Any Vehicle Beyond The Manufacturers GVWR
- SumoSprings(R) are a patented suspension product designed to enhance load carrying ability, stabilize sway, and improve overall driver control and ride comfort. They are maintenance free, do not leak air, and do not require airlines or compressors. SumoSprings(R) are manufactured in a variety of heights, diameters and densities to support multiple front and rear applications. They are manufactured from proprietary closed micro-cellular urethane providing a smooth and progressive spring rate.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2023 - Jeep Wrangler | Rear |
Showing 1 - 10 of 177 products
Loading...