2024 Jeep Gladiator Suspension Parts
Choose your Part Name for your 2024 Jeep Gladiator
Air Suspension Helper Spring
Suspension Control Arm
Suspension Leveling Kit
Suspension Lift Kit
Suspension Shock Absorber
Suspension Shock Absorber Kit
Suspension Stabilizer Bar Assembly
Suspension Stabilizer Bar Hardware Kit
Suspension Stabilizer Bar Kit
Suspension Track Bar
Suspension Trailing Arm
Image
Product
Price
- B8 5100 - Suspension Shock Absorber
- Fits Vehicles With 3-4.5" Front Lift Requires appropriate bump stop extensions and aftermarket driveshaft
- 46mm Monotube Shock Absorber
- B8 5100
- Product Attributes:
- Internal Design: Monotube
- Upper Mount Type: Eye 12.8mm
- Reservoir: No
- Segment: Light Truck
- Body Design: Smooth Body (non-coilover)
- Spring Seat Included: No
- PartType: Shocks / Struts
- Collapsed Length (MM): 470.5
- Boot Included: No
- Lower Mount Type: Eye 12.8mm
- Adjustable Damping: Non-adjustable
- Body Diameter (ID): 46mm
- Prop 65 (Y/N): Y
-
Features:
- 46mm monotube design ensures consistent, fade-free performance in all conditions
- Vehicle specific tuning
- Patented digressive valving instantly reacts to changing surface conditions
- Bilstein B8 5100 shock absorbers are designed as a direct fit solution for lifted trucks and SUV’s. These shock absorbers feature a monotube design which provides consistent fade free performance. B8 5100 shock absorbers utilize a unique, velocity sensitive, digressive piston which reacts to changing road conditions. All B8 5100 shock absorbers are tuned for each specific application to assure optimal performance is achieved. B8 5100 shock absorbers offer a significant improvement in ride quality, handling, and comfort.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
985-24-179, RS77067
Additional Fitment Information:
| Vehicle | Position | Sub Model |
|---|---|---|
| 2024 - Jeep Gladiator | Front | Rubicon X |
- B8 5160 - Suspension Shock Absorber
- Fits Vehicles With 3-4.5" Front Lift Requires appropriate bump stop extensions and aftermarket driveshaft
- 46mm Monotube Shock Absorber
- B8 5160
- Product Attributes:
- Internal Design: Monotube
- Upper Mount Type: Eye 12.8mm
- Reservoir: Yes
- Segment: Light Truck
- Billet Reservoir Clamp Included: Yes
- Body Design: Smooth Body (non-coilover)
- Spring Seat Included: No
- PartType: Shocks / Struts
- Collapsed Length (MM): 446.0
- Boot Included: No
- Lower Mount Type: Eye 12.8mm
- Adjustable Damping: Non-adjustable
- Body Diameter (ID): 46mm
- Prop 65 (Y/N): Y
-
Features:
- Remote reservoir increases shock oil capacity for greater heat dissipation
- Self-adjusting deflective disc valving reacts immediately to surface changes enabling maximum vehicle control
- 46mm monotube design ensures consistent, fade-free performance in all conditions
- Bilstein B8 5160 remote reservoir shock absorbers are designed as a direct fit solution for lifted trucks and SUVs. The remote reservoir will offer increased cooling capacity and wheel travel to optimize overall performance compared to a traditional shock absorber. These shock absorbers feature a monotube design for consistent fade free performance and utilize velocity sensitive digressive valve settings which are tuned for each specific application. Each shock absorber is fitted with a unique 360 degree swivel banjo hose fitting and an attractive billet reservoir mount where applicable providing a clean, low profile installation. B8 5160 remote reservoir shock absorbers will increase overall durability of your vehicle allowing you to conquer the harshest of off-road environments.
This Part Fits the Following OEM/Substitute Numbers:
25-305296, 885-24-248
Additional Fitment Information:
| Vehicle | Position | Sub Model |
|---|---|---|
| 2024 - Jeep Gladiator | Front Left | Rubicon X |
- B8 5100 - Suspension Shock Absorber
- Fits Vehicles With 0-1" Rear Lift
- 46mm Monotube Shock Absorber
- B8 5100
- Product Attributes:
- Internal Design: Monotube
- Upper Mount Type: Eye 14.1mm
- Reservoir: No
- Segment: Light Truck
- Body Design: Smooth Body (non-coilover)
- Spring Seat Included: No
- PartType: Shocks / Struts
- Collapsed Length (MM): 437.3
- Boot Included: Black Bellows
- Lower Mount Type: Eye 14.1mm
- Adjustable Damping: Non-adjustable
- Body Diameter (ID): 46mm
- Prop 65 (Y/N): Y
-
Features:
- Vehicle specific tuning
- Patented digressive valving instantly reacts to changing surface conditions
- 46mm monotube design ensures consistent, fade-free performance in all conditions
- Bilstein B8 5100 shock absorbers are designed as a direct fit solution for lifted trucks and SUV’s. These shock absorbers feature a monotube design which provides consistent fade free performance. B8 5100 shock absorbers utilize a unique, velocity sensitive, digressive piston which reacts to changing road conditions. All B8 5100 shock absorbers are tuned for each specific application to assure optimal performance is achieved. B8 5100 shock absorbers offer a significant improvement in ride quality, handling, and comfort.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
68465830AB, 68465831AF, 68465831AG, 68465832AF, 68465833AF, 68465837AB, 68466107AA, 68518228AG, 68518565AB, 68518566AB, 68518568AB, 68518569AC, 68518570AB, 68518571AB, 68525361AB, 68525363AB, 68660485AA, 68660545AA...VIEW MORE
Additional Fitment Information:
| Vehicle | Position | Sub Model |
|---|---|---|
| 2024 - Jeep Gladiator | Rear | Rubicon X |
- B8 5100 - Suspension Shock Absorber
- Fits Vehicles With 3-4.5" Rear Lift Requires appropriate extensions to bump stops, sway bar links, and brake lines
- 46mm Monotube Shock Absorber
- B8 5100
- Product Attributes:
- Internal Design: Monotube
- Upper Mount Type: Eye 14.1mm
- Reservoir: No
- Segment: Light Truck
- Body Design: Smooth Body (non-coilover)
- Spring Seat Included: No
- PartType: Shocks / Struts
- Collapsed Length (MM): 465.5
- Boot Included: Black Bellows
- Lower Mount Type: Eye 14.1mm
- Adjustable Damping: Non-adjustable
- Body Diameter (ID): 46mm
- Prop 65 (Y/N): Y
-
Features:
- Vehicle specific tuning
- Patented digressive valving instantly reacts to changing surface conditions
- 46mm monotube design ensures consistent, fade-free performance in all conditions
- Bilstein B8 5100 shock absorbers are designed as a direct fit solution for lifted trucks and SUV’s. These shock absorbers feature a monotube design which provides consistent fade free performance. B8 5100 shock absorbers utilize a unique, velocity sensitive, digressive piston which reacts to changing road conditions. All B8 5100 shock absorbers are tuned for each specific application to assure optimal performance is achieved. B8 5100 shock absorbers offer a significant improvement in ride quality, handling, and comfort.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
985-24-221, RS77070
Additional Fitment Information:
| Vehicle | Position | Sub Model |
|---|---|---|
| 2024 - Jeep Gladiator | Rear | Rubicon X |
- Coil-Rite Air Helper Springs - Gladiator
- Coil-Rite Air Helper Springs - Gladiator
- Firestone Ride-Rite Rear Kit
- Product Attributes:
- WARNING CA Proposition 65: Yes
-
Features:
- Assembled in the USA
- No Drill Installation - This kit uses existing holes in the frame to mount the upper and lower brackets. Modification of the frame or factory suspension is required. Installing this kit does not void the factory warranty
- Rated up to 1,000 lbs. of carry capacity
- Manual Fill - Compressor Not Included
- 5 psi minimum air pressure recommend for unloaded conditions
- 60 psi maximum for loaded conditions
- Installs in 1-2 hours
- Eliminates bottoming out, improves ride quality in loaded conditions by returning your vehichle back to factory ride height
- Ride-Rite kits can be installed on most light trucks, motor-homes, RVs, SUVs, CUV's and vans. Each application is specifically designed to maximize the vehicle's safe load-carrying capacity, stability, ride quality and brake effectiveness. Firestone Ride-Rite air helper springs provide load support through the use of air pressure that can be adjusted for changing loads. They enhance the ride by reducing inter-leaf friction. The system features individual inflation valves that allow for separate side-to-side or front-to-rear adjustment, which helps keep the vehicle level when carrying off-center loads and maintains ride quality under differing load conditions. Most Ride-Rite kits are no-drill systems, designed to use the vehicle's factory holes and mount between its frame and suspension. All the components are included in the kit for an easy installation that typically takes 1 to 2 hours. Kits come with a two-year limited warranty.
Additional Fitment Information:
| Vehicle |
|---|
| 2024 - Jeep Gladiator |
- B8 5100 - Suspension Shock Absorber
- Fits Vehicles With 1.5-2.5" Rear Lift Requires appropriate bump stop extensions
- 46mm Monotube Shock Absorber
- B8 5100
- Product Attributes:
- Internal Design: Monotube
- Upper Mount Type: Eye 14.1mm
- Reservoir: No
- Segment: Light Truck
- Body Design: Smooth Body (non-coilover)
- Spring Seat Included: No
- PartType: Shocks / Struts
- Collapsed Length (MM): 455.0
- Boot Included: Black Bellows
- Lower Mount Type: Eye 14.1mm
- Adjustable Damping: Non-adjustable
- Body Diameter (ID): 46mm
- Prop 65 (Y/N): Y
-
Features:
- Vehicle specific tuning
- Patented digressive valving instantly reacts to changing surface conditions
- 46mm monotube design ensures consistent, fade-free performance in all conditions
- Bilstein B8 5100 shock absorbers are designed as a direct fit solution for lifted trucks and SUV’s. These shock absorbers feature a monotube design which provides consistent fade free performance. B8 5100 shock absorbers utilize a unique, velocity sensitive, digressive piston which reacts to changing road conditions. All B8 5100 shock absorbers are tuned for each specific application to assure optimal performance is achieved. B8 5100 shock absorbers offer a significant improvement in ride quality, handling, and comfort.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
985-24-220, RS77070
Additional Fitment Information:
| Vehicle | Position | Sub Model |
|---|---|---|
| 2024 - Jeep Gladiator | Rear | Rubicon X |
- B8 5100 - Suspension Shock Absorber
- Fits Vehicles With 2-3" Front Lift
- 46mm Monotube Shock Absorber
- B8 5100
- Product Attributes:
- Internal Design: Monotube
- Upper Mount Type: Eye 12.8mm
- Reservoir: No
- Segment: Light Truck
- Body Design: Smooth Body (non-coilover)
- Spring Seat Included: No
- PartType: Shocks / Struts
- Collapsed Length (MM): 433.5
- Boot Included: Black Bellows
- Lower Mount Type: Eye 12.8mm
- Adjustable Damping: Non-adjustable
- Body Diameter (ID): 46mm
- Prop 65 (Y/N): Y
-
Features:
- Vehicle specific tuning
- Patented digressive valving instantly reacts to changing surface conditions
- 46mm monotube design ensures consistent, fade-free performance in all conditions
- Bilstein B8 5100 shock absorbers are designed as a direct fit solution for lifted trucks and SUV’s. These shock absorbers feature a monotube design which provides consistent fade free performance. B8 5100 shock absorbers utilize a unique, velocity sensitive, digressive piston which reacts to changing road conditions. All B8 5100 shock absorbers are tuned for each specific application to assure optimal performance is achieved. B8 5100 shock absorbers offer a significant improvement in ride quality, handling, and comfort.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
985-24-177, RS77065
Additional Fitment Information:
| Vehicle | Position | Sub Model |
|---|---|---|
| 2024 - Jeep Gladiator | Front | Rubicon X |
- with Front Raised Height 2 (in) to 3 (in) Optional Front Extended Travel Shock Absorber(s) RS999067 available. Aftermarket Double Cardan Front Driveshaft Required To Use Optional Long Travel Shock Absorber(s)
- RS9000XL
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
68382606AB, 68382607AB, 68382828AB, 68382829AA, 68382850AB, 68382853AA, 68382855AA, 68382856AB, 68383632AB, 68383633AA, 68465828AF, 68465830AB, 68465831AF, 68465837AB, 68465847AC, 68465848AB, 68466107AA
Additional Fitment Information:
| Vehicle | Position | Sub Model |
|---|---|---|
| 2024 - Jeep Gladiator | Front | Rubicon X |
- with Front Raised Height 4 (in) Use with Rancho RS66128B System(s) Optional Front Extended Travel Shock Absorber(s) RS999067 available. Aftermarket Double Cardan Front Driveshaft Required To Use Optional Long Travel Shock Absorber(s)
- RS9000XL
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
Additional Fitment Information:
| Vehicle | Position | Sub Model |
|---|---|---|
| 2024 - Jeep Gladiator | Front | Rubicon X |
- with Front Raised Height 2 (in) to 3 (in) Optional Front Extended Travel Shock Absorber(s) RS77067 available. Aftermarket Double Cardan Front Driveshaft Required To Use Optional Long Travel Shock Absorber(s)
- RS7MT
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
Additional Fitment Information:
| Vehicle | Position | Sub Model |
|---|---|---|
| 2024 - Jeep Gladiator | Front | Rubicon X |
Showing 1 - 10 of 63 products
Loading...