1957 Chevrolet Corvette Transmission Parts
Choose your Part Name for your 1957 Chevrolet Corvette
Automatic Transmission Dipstick
Automatic Transmission Extension Housing Seal
Automatic Transmission Oil Pump Seal
Clutch Flywheel
Clutch Flywheel Bolt
Clutch Flywheel Bolt Set
Clutch Pilot Bearing
Clutch Pressure Plate and Disc Set
Clutch Release Bearing
Manual Transmission Input Shaft Seal
Manual Transmission Output Shaft Seal
Transmission Clutch Kit
Transmission Clutch and Flywheel Kit
Image
Product
Price
- steel flywheel
- 153 Teeth; 10.5 B/B And Diaphragm
- Lightweight Steel flywheel Chevy 305-350/63-85/0 balance/153T/10.5 B/B/Diaphragm
- Steel Flywheel
-
Features:
- Dynamically Balanced Within 1/2 oz./in. Of Factory Specifications
- Surface Ground For Optimum Disc Mating Surface
- Strictly Factory Warranty Only
- The flywheel accepts one half of the load of the clutch system. To realize the potential of the clutch system, the flywheel must be flat, parallel to the crankshaft flange, properly surface ground for maximum friction compatibility with the clutch disc, and balanced. Dyno testing proves that flywheel balance is critical to achieving maximum engine service. Every RAM flywheel is dynamically balanced to within ? ounce/inch of the factory specification. RAM aluminum flywheels have a .250 inch thick steel friction insert to handle the heat generated under extreme conditions, while allowing resurfacing without the need to replace the insert. All RAM flywheels are manufactured from SFI certified materials in our South Carolina facility.
Additional Fitment Information:
| Vehicle |
|---|
| 1957 - Chevrolet Corvette |
- pilot bushing/bearing
- 0.592 in. ID; 1.094 in. OD; 0.75 in. Length
- Pilot bushing/bearing AMC; General Motors; Jeep
- Product Attributes:
- Inside Diameter: 0.592 In.
-
Features:
- Pilot Bushing/Bearing
- Strictly Factory Warranty Only
- Premium replacement pilot bearings and bushings complete your clutch install for a long, trouble free life of operation.
Additional Fitment Information:
| Vehicle |
|---|
| 1957 - Chevrolet Corvette |
- Street Pro: Clutch Kit: GM 1955-83: 10.5 x 1-1/8 x 10
- Street Pro: Clutch Kit: GM 1955-83: 10.5 x 1-1/8 x 10 Spline
- Product Attributes:
- Pilot Bushing Material: Bronze Oilite
- Counterweight Assist: No
- Quantity: Sold As A Kit.
- Pressure Plate Style: Diaphragm
- Application: 1955-83 Gm
- Alignment Tool Included: Yes
- Disc Material: Organic
- Pilot Bushing Included: Yes
- Clutch Disc Quantity: 1
- Input Shaft Diameter: 1.125
- Horsepower Rating: 400
- Make: Gm
- Hub Style: Sprung
- Disc Diameter (in.): 10.500
- Clutch Usage: Performance
- Disc Diameter: 10.5in.
- Disc Style: Full Face
- Spline: 1-1/8 X 10
- Throwout Bearing Included: Yes
- Flywheel Included: No
-
Features:
- • High Performance Street Upgrade. • Organic Lined Sprung Hub Disc. • Excellent Street Drivability. • Smooth, Even Engagement.
- The Street Pro is the perfect choice for an entry level performance clutch for the street. We recommend it for cars up to 400hp (depending on part number) with mild engine mods and street tires. Included is a high clamp load pressure plate, an organic disc for smooth and even engagement with increased holding power over stock. Our kits are complete with Pressure Plate, Disc, throw out bearing (where applicable) pilot bushing (where applicable) and alignment tool. If you are looking for a clutch that's a great step up from your stock set up, the McLeod Street Pro is the clutch for you.
Additional Fitment Information:
| Vehicle | Block | CC | Transmission | Engine | Transmission Manuf. Code | Sub Model | CID |
|---|---|---|---|---|---|---|---|
| 1957 - Chevrolet Corvette | V | 4638 | Manual | 8 Cyl 4.6L | T-10 | Base | 283 |
- Street Pro: Kit: Clutch Kit: GM 1957-85: 11 x 1-1/8 x 10
- Street Pro: Clutch Kit: GM 1957-85: 11 x 1-1/8 x 10 Spline
- Product Attributes:
- Pilot Bushing Material: Bronze Oilite
- Counterweight Assist: No
- Quantity: Sold As A Kit.
- Pressure Plate Style: Diaphragm
- Application: 1957-85 Gm
- Alignment Tool Included: Yes
- Disc Material: Organic
- Pilot Bushing Included: Yes
- Clutch Disc Quantity: 1
- Input Shaft Diameter: 1.125
- Horsepower Rating: 425
- Make: Gm
- Hub Style: Sprung
- Disc Diameter (in.): 11.000
- Clutch Usage: Performance
- Disc Diameter: 11in.
- Disc Style: Full Face
- Spline: 1-1/8 X 10
- Throwout Bearing Included: Yes
- Flywheel Included: No
-
Features:
- • High Performance Street Upgrade. • Organic Lined Sprung Hub Disc. • Excellent Street Drivability. • Smooth, Even Engagement.
- The Street Pro is the perfect choice for an entry level performance clutch for the street. We recommend it for cars up to 400hp (depending on part number) with mild engine mods and street tires. Included is a high clamp load pressure plate, an organic disc for smooth and even engagement with increased holding power over stock. Our kits are complete with Pressure Plate, Disc, throw out bearing (where applicable) pilot bushing (where applicable) and alignment tool. If you are looking for a clutch that's a great step up from your stock set up, the McLeod Street Pro is the clutch for you.
Additional Fitment Information:
| Vehicle | Block | CC | Transmission | Fuel Type | Engine | Sub Model | CID |
|---|---|---|---|---|---|---|---|
| 1957 - Chevrolet Corvette | V | 4638 | Manual | GAS | 8 Cyl 4.6L | Base | 283 |
- Super Street Pro: Clutch Kit: GM 1957-85: 11 x 1-1/8 x 10
- Super Street Pro: Clutch Kit: GM 1957-85: 11 x 1-1/8 x 10 Spline
- Product Attributes:
- Pilot Bushing Material: Bronze Oilite
- Counterweight Assist: No
- Quantity: Sold As A Kit.
- Pressure Plate Style: Diaphragm
- Application: 1957-85 Gm
- Alignment Tool Included: Yes
- Disc Material: Organic/ceramic
- Pilot Bushing Included: Yes
- Clutch Disc Quantity: 1
- Input Shaft Diameter: 1.125
- Horsepower Rating: 525
- Make: Gm
- Hub Style: Sprung
- Disc Diameter (in.): 11.000
- Clutch Usage: Performance
- Disc Diameter: 11in.
- Disc Style: Full Face/segmented
- Spline: 1-1/8 X 10
- Throwout Bearing Included: Yes
- Flywheel Included: No
-
Features:
- • Street/Strip High Performance Upgrade. • Dual Faced Disc. • Exceptional Holding. • Smooth Engagement.
- The Super Street Pro is ideal for both the street and the track. We recommend it for cars up to 550 Hp (depending on part number) with moderate engine mods and street tires. The kit is SFI approved. Included is a high clamp load pressure plate, a dual performance organic and ceramic disc for smooth engagement and awesome holding power. Our kits are complete with pressure plate, a dual performance organic/ceramic disc, throw out bearing (where applicable) pilot bushing (where applicable) and alignment tool. If you are looking for a street friendly yet track proven clutch, the McLeod Super Street Pro is your best choice.
Additional Fitment Information:
| Vehicle | Block | CC | Transmission | Fuel Type | Engine | Sub Model | CID |
|---|---|---|---|---|---|---|---|
| 1957 - Chevrolet Corvette | V | 4638 | Manual | GAS | 8 Cyl 4.6L | Base | 283 |
- Street Extreme: Clutch Kit: GM 1957-85: 11 x 1-1/8 x 10
- Street Extreme: Clutch Kit: GM 1957-85: 11 x 1-1/8 x 10 Spline
- Product Attributes:
- Pilot Bushing Material: Bronze Oilite
- Counterweight Assist: No
- Quantity: Sold As A Kit.
- Pressure Plate Style: Diaphragm
- Application: 1957-85 Gm
- Alignment Tool Included: Yes
- Disc Material:
- Ceramic
- Ceramic/ceramic
- Pilot Bushing Included: Yes
- Clutch Disc Quantity: 1
- Input Shaft Diameter: 1.125
- Horsepower Rating: 650
- Make: Gm
- Hub Style: Sprung
- Disc Diameter (in.): 11.000
- Clutch Usage: Performance
- Disc Diameter: 11in.
- Disc Style: Segmented
- Spline: 1-1/8 X 10
- Throwout Bearing Included: Yes
- Flywheel Included: No
-
Features:
- • Street/Strip High Performance Upgrade. • Ceramic Lined Sprung Hub Disc. • Exceptional Holding. • Excellent Street/Track Clutch.
- The Street Extreme is ideal for both the street and the track. We recommend it for cars up to 700 crank Hp/Tq (depending on part number) with moderate engine mods and street tires. The kit is SFI approved. Included is a high clamp load pressure plate, a dual face ceramic disc for smooth engagement and awesome holding power. Our kits are complete with Pressure Plate, Disc, throw out bearing (where applicable) pilot bushing (where applicable) and alignment tool.
Additional Fitment Information:
| Vehicle | Block | CC | Transmission | Fuel Type | Engine | Sub Model | CID |
|---|---|---|---|---|---|---|---|
| 1957 - Chevrolet Corvette | V | 4638 | Manual | GAS | 8 Cyl 4.6L | Base | 283 |
- Crank Bolts: 7/16in x 20: GM, Ford, Mopar: Set of 6
- Crank Bolts: 7/16in x 20: GM, Ford, Mopar: Set of 6
- Product Attributes:
- Material Finish: Black Oxide
- Washer Included: No
- Head Style: 6 Point
- Fastener Grade: Grade 8
- Quantity:
- Sold As A Set Of 6.
- Sold In Package Of 6 Bolts.
- Fastener Color: Black
- Bolt Location: Flywheel To Crankshaft
- Fastener Material: Steel
- Make: Gm, Ford, Mopar
-
Features:
- All McLeod Racing hardware is quality Grade 8 Hardware that is to made proprietary to McLeod Racings specs. We also are proud to use ARP the world wide leader in performance hardware in some parts numbers.
- Flywheel bolts play a very important role in the performance and safety of race cars and street machines alike. That's why McLeod offers flywheel bolt kits that are far superior to OEM hardware, so you can bolt in your flywheel with confidence. McLeqod steel bolt kits offer increased strength and improved flywheel register.
Additional Fitment Information:
| Vehicle | Block | CC | Transmission | Region | Engine | Sub Model | CID |
|---|---|---|---|---|---|---|---|
| 1957 - Chevrolet Corvette | V | 4638 | Manual | United States | 8 Cyl 4.6L | Base | 283 |
- Crank Bolts: 7/16in x 20: GM, Ford, Mopar: Set of 6
- Crank Bolts: 7/16in x 20: GM, Ford, Mopar: Set of 6
- Product Attributes:
- Washer Included: No
- Head Style: 6 Point
- Quantity: Sold As A Set Of 6.
- Fastener Color: Black
- Fastener Material: Steel
- Make: Gm, Ford, Mopar
-
Features:
- All McLeod Racing hardware is quality Grade 8 Hardware that is to made proprietary to McLeod Racings specs. We also are proud to use ARP the world wide leader in performance hardware in some parts numbers.
- Flywheel bolts play a very important role in the performance and safety of race cars and street machines alike. That's why McLeod offers flywheel bolt kits that are far superior to OEM hardware, so you can bolt in your flywheel with confidence. McLeqod steel bolt kits offer increased strength and improved flywheel register.
Additional Fitment Information:
| Vehicle | Block | CC | Transmission | Region | Engine | Sub Model | CID |
|---|---|---|---|---|---|---|---|
| 1957 - Chevrolet Corvette | V | 4638 | Manual | United States | 8 Cyl 4.6L | Base | 283 |
- Flywheel: Steel: Chevrolet: 1955-85 SBC: 1970-90 BBC: 168T: 22 lbs.
- Flywheel: Steel: Chevrolet: 1955-85 SBC: 1970-90 BBC: 2pc Rear Main: Internal Balance: 168T: 22 lbs.
- Product Attributes:
- SFI 1.1 Approved: Yes
- Engine Balance: Internal
- Quantity: Sold Individually.
- Pressure Plate Pattern 2: 11 In, 12 In, Borg & Beck/diaphragm
- Pressure Plate Style: Borg & Beck/diaphragm
- Pressure Plate Pattern 1: 10 In, 10.5 In, Borg & Beck/diaphragm
- Rear Main Seal Style: 2-piece
- Crankshaft to Flywheel Bolt Quantity: 6-bolt
- Crankshaft Bolt Hole Quantity: 6
- Make: Chevrolet
- Disc Diameter (in.): 10.500/11.000/12.000 In.
- Tooth Quantity: 168
- Replaceable Friction Surface: No
- Engine 1: 1955-85 Sbc 2pc Seal (large Register)
- Engine 2:
- 1970-1990 Bbc 2pc Seal (large Register)
- 1991-up Bbc 1pc Seal 454, 502, 572 (large Register)
- Weight:
- 22 Lbs.
- 22.000 Lbs.
- Engine 3: 1991-up Bbc 1pc Seal 454, 502, 572 (large Register)
- Marine Use: No
- Material: Billet Steel
- Ring Gear Tooth Quantity: 168-tooth
- Additional Counter Weight Kit Required: 560222
-
Features:
- • Billet Steel. • 1045 Steel Hardened Ring Gear. • SFI rated.
- McLeod steel flywheels are perfect for street applications where easy stop light acceleration is desired. Steel flywheels come in various weights and dimensions. For race applications, a heavier steel unit is ideal for helping launch a heavy car with a smaller engine with less torque and horsepower. They are CNC machined from billet alloy steel and have 1045 hardened steel ring gears.
Additional Fitment Information:
| Vehicle | Block | CC | Region | Engine | Sub Model | CID |
|---|---|---|---|---|---|---|
| 1957 - Chevrolet Corvette | V | 4638 | United States | 8 Cyl 4.6L | Base | 283 |
- Throw Out Bearing: GM Short 1.525" Tall
- Throw Out Bearing: GM Short 1.525" Tall
- Product Attributes:
- Bearing Retainer O.D.: 1.375in.
- Spline: 1 1/8in. X 10
-
Features:
- • OEM replacement. • Angular contact. • Constant running bearings. • General Motors, Ford & Chrysler applications.
- McLeod offers OEM replacement throwout bearings with angular contact, constant running bearings for long life and durabilty. Choose from General Motors, Ford & Chrysler applications. Mcleod also offers an exclusive adjustable height bearing for General Motors & Ford applications. These bearings are adjustable to three different height locations to help maintain proper mechanical linkage geometry.
Additional Fitment Information:
| Vehicle | Block | CC | Transmission | Engine | Sub Model | CID |
|---|---|---|---|---|---|---|
| 1957 - Chevrolet Corvette | V | 4638 | Manual | 8 Cyl 4.6L | Base | 283 |
Showing 1 - 10 of 21 products
Loading...