1962 Chevrolet K20 Pickup Transmission Parts
Choose your Part Name for your 1962 Chevrolet K20 Pickup
Automatic Transmission Dipstick
Automatic Transmission Extension Housing Seal
Automatic Transmission Oil Pump Seal
Clutch Flywheel
Clutch Pilot Bearing
Clutch Pressure Plate and Disc Set
Clutch Release Bearing
Manual Transmission Input Shaft Seal
Transmission Clutch Friction Plate
Transmission Clutch Kit
Transmission Clutch Pressure Plate
Transmission Clutch and Flywheel Kit
Transmission Filter Kit
Image
Product
Price
- steel flywheel
- 168 Teeth; Zero Balance
- Steel flywheel Chevy 1955-85/262-427/0 bal./168T
- Steel Flywheel
-
Features:
- Dynamically Balanced Within 1/2 oz./in. Of Factory Specifications
- Surface Ground For Optimum Disc Mating Surface
- Strictly Factory Warranty Only
- The flywheel accepts one half of the load of the clutch system. To realize the potential of the clutch system, the flywheel must be flat, parallel to the crankshaft flange, properly surface ground for maximum friction compatibility with the clutch disc, and balanced. Dyno testing proves that flywheel balance is critical to achieving maximum engine service. Every RAM flywheel is dynamically balanced to within ? ounce/inch of the factory specification. RAM aluminum flywheels have a .250 inch thick steel friction insert to handle the heat generated under extreme conditions, while allowing resurfacing without the need to replace the insert. All RAM flywheels are manufactured from SFI certified materials in our South Carolina facility.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1962 - Chevrolet K20 Pickup | V | 4638 | 8 Cyl 4.6L | 283 |
- 11 x 1 1/8-10 Spline
- Replacement clutch set 1955-85 GM Diaphragm 11 x 1 1/8-10
- Replacement Clutch Set
-
Features:
- Replacement Clutch Set
- OEM Quality Replacement Components
- Includes Pressure Plate/Disc/Release Bearing/Alignment Tool
- RAM replacement clutch sets use oem components for a hassle free installation. Each set includes the pressure plate, clutch disc, release bearing (where applicable), and alignment tool. These clutches are for use in stock vehicles used solely on the street.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1962 - Chevrolet K20 Pickup | V | 4638 | 8 Cyl 4.6L | 283 |
- pilot bushing/bearing
- 0.592 in. ID; 1.094 in. OD; 0.75 in. Length
- Pilot bushing/bearing AMC; General Motors; Jeep
- Product Attributes:
- Inside Diameter: 0.592 In.
-
Features:
- Pilot Bushing/Bearing
- Strictly Factory Warranty Only
- Premium replacement pilot bearings and bushings complete your clutch install for a long, trouble free life of operation.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1962 - Chevrolet K20 Pickup | V | 4638 | 8 Cyl 4.6L | 283 |
- Powergrip clutch set
- 11 x 1 1/8-10 Spline
- Powergrip clutch set 1955-85 GM 11 Diaphragm 1 1/8-10
- Powergrip Clutch Set
-
Features:
- Effectively Increase The Clutch Capacity To The 550 HP Level
- 8 Spring Hub Is Equipped w/Ram Polycoil Damper Springs
- 900/300 Series Friction Material Has Great Drivability
- Meets SFI Specifications
- Includes Pressure Plate/Disc/Release Bearing/Alignment Tool
- As power levels move up to and beyond 500 horsepower. RAM POWERGRIP meets the challenge with a combination of organic and metallic disc friction surfaces that effectively increase the clutch capacity to the 550 horsepower level. The 8-spring hub is equipped with RAM POLYCOIL damper springs encapsulated in polyurethane. This spring can handle three times the shock load of just the coil spring, and is standard in all RAM competition discs. The RAM Competition pressure plate in this kit provides 30% more clamp pressure than stock, and meets SFI specifications. At this high level of performance RAM POWERGRIP provides surprisingly good driving characteristics with smooth, comfortable driver control. Sets include pressure plate, disc, release bearing, and alignment tool unless otherwise noted.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1962 - Chevrolet K20 Pickup | V | 4638 | 8 Cyl 4.6L | 283 |
- Flywheel: Steel: Chevrolet: 1955-85 SBC: 1970-90 BBC: 168T: 22 lbs.
- Flywheel: Steel: Chevrolet: 1955-85 SBC: 1970-90 BBC: 2pc Rear Main: Internal Balance: 168T: 22 lbs.
- Product Attributes:
- SFI 1.1 Approved: Yes
- Engine Balance: Internal
- Quantity: Sold Individually.
- Pressure Plate Pattern 2: 11 In, 12 In, Borg & Beck/diaphragm
- Pressure Plate Style: Borg & Beck/diaphragm
- Pressure Plate Pattern 1: 10 In, 10.5 In, Borg & Beck/diaphragm
- Rear Main Seal Style: 2-piece
- Crankshaft to Flywheel Bolt Quantity: 6-bolt
- Crankshaft Bolt Hole Quantity: 6
- Make: Chevrolet
- Disc Diameter (in.): 10.500/11.000/12.000 In.
- Tooth Quantity: 168
- Replaceable Friction Surface: No
- Engine 1: 1955-85 Sbc 2pc Seal (large Register)
- Engine 2:
- 1970-1990 Bbc 2pc Seal (large Register)
- 1991-up Bbc 1pc Seal 454, 502, 572 (large Register)
- Weight:
- 22 Lbs.
- 22.000 Lbs.
- Engine 3: 1991-up Bbc 1pc Seal 454, 502, 572 (large Register)
- Marine Use: No
- Material: Billet Steel
- Ring Gear Tooth Quantity: 168-tooth
- Additional Counter Weight Kit Required: 560222
-
Features:
- • Billet Steel. • 1045 Steel Hardened Ring Gear. • SFI rated.
- McLeod steel flywheels are perfect for street applications where easy stop light acceleration is desired. Steel flywheels come in various weights and dimensions. For race applications, a heavier steel unit is ideal for helping launch a heavy car with a smaller engine with less torque and horsepower. They are CNC machined from billet alloy steel and have 1045 hardened steel ring gears.
Additional Fitment Information:
| Vehicle | Block | CC | Region | Engine | Sub Model | CID |
|---|---|---|---|---|---|---|
| 1962 - Chevrolet K20 Pickup | L | 4278 | United States | 6 Cyl 4.3L | Base | 261 |
- DFX(R); Clutch Friction Disc
- 11 in. Dia.; 26 Spline; 1 1/8 in. Input Shaft; 6 Paddle Sprung; Cerametallic
- Centerforce(R) DFX Clutch Discs are paddle style discs using ceramic materials for more aggressive engagement. These discs are replacements for Centerforce DFX pressure plates.
- DFX Clutch Disc
- Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warnings: This Product Can Expose You To Chemicals Including Nickel Compounds And Dusts; Which Are Known To The State Of California To Cause Cancer. For More Information; Visit Www.p65warnings.ca.gov. Wash Hands Following Installation.
- Diameter (in.): 11.000 In.
- Spline Size: 1.125 In. - 26
-
Features:
- Added Durability
- Light Pedal Effort
- Patented Centrifugal Weight System [where Applicable]
- Patented Ball Bearing Pressure Plate [where Applicable]
- High Holding Capacity
- Heavy Duty Design
- Dampened Paddle Style Disc
- SFI Approved
- Centerforce(R) brings together high-quality friction materials and patented processes to give you top-of-the-line discs. Centerforce offers discs for the Centerforce I, Centerforce II, Dual Friction, LMC, and DFX series clutches. Each disc is designed to work best with a corresponding Centerforce pressure plate. DFX Discs are stronger paddle style discs using ceramic materials for more aggressive engagement. These discs are replacements for Centerforce DFX pressure plates.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1962 - Chevrolet K20 Pickup | V | 4638 | 8 Cyl 4.6L | 283 |
- Centerforce(R) I and II; Clutch Friction Disc
- 11 in. Dia.; 10 Spline; 1 1/8 in. Input Shaft; Organic Friction
- The Centerforce I and II Discs are made from full high-quality friction full facings. These discs are made for Centerforce I and II pressure plates.
- Clutch Disc
- Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warnings: This Product Can Expose You To Chemicals Including Nickel Compounds And Dusts; Which Are Known To The State Of California To Cause Cancer. For More Information; Visit Www.p65warnings.ca.gov. Wash Hands Following Installation.
- Diameter (in.): 11.000 In.
- Spline Size: 1.03125 In. - 10
-
Features:
- High Quality Friction Material
- Smooth Engagement
- Centerforce brings together high-quality friction materials and patented processes to give you top-of-the-line discs. Centerforce offers discs for the Centerforce I, Centerforce II, Dual Friction, LMC, and DFX series clutches. Each disc is designed to work best with a corresponding Centerforce pressure plate.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1962 - Chevrolet K20 Pickup | V | 4638 | 8 Cyl 4.6L | 283 |
- Centerforce(R) Flywheels; Steel
- 168 Teeth; Weight 31.2 lbs.; 2/3 Bolt Pattern; 14.096 in. Outside Diameter; w/o Counter Balance
- Centerforce(R) SFI-certified steel flywheels are CNC-machined from billet steel for precise; no-hassle; bolt-in installation.
- Billet Steel Flywheel
- Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warnings: This Product Can Expose You To Chemicals Including Nickel Compounds And Dusts; Which Are Known To The State Of California To Cause Cancer. For More Information; Visit Www.p65warnings.ca.gov. Wash Hands Following Installation.
-
Features:
- High Quality Billet Steel
- Cad/cam Designed And Cnc Machined
- Precision Balanced
- No-hassle Bolt-in
- Domestic And Import Applications
- Centerforce(R) steel flywheels are manufactured from high quality billet steel and match closely to the original equipment flywheel weight. Billet steel flywheels are available for popular import and domestic vehicles, including trucks. Centerforce steel flywheels are CAD/CAM-designed and CNC-machined from billet steel for precise, no-hassle, bolt-in installation. Centerforce billet steel flywheels are SFI-certified, so you know that you can count on them, on the street and on the track.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1962 - Chevrolet K20 Pickup | V | 4638 | 8 Cyl 4.6L | 283 |
- Centerforce(R) Accessories; Clutch Pilot Bearing
- 0.715 in. Height; 1.094 in. Major Outside Diameter; 0.615 in. Inside Diameter
- Each pilot bearing or bushing sold by Centerforce is the highest quality available. In most application the bearing is a direct Original Equipment (O.E.) replacement.
- Pilot Bearing
- Product Attributes:
- Inside Diameter: 0.612 In.
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warnings: This Product Can Expose You To Chemicals Including Nickel Compounds And Dusts; Which Are Known To The State Of California To Cause Cancer. For More Information; Visit Www.p65warnings.ca.gov. Wash Hands Following Installation.
-
Features:
- Pilot Bearing
- Pilot bearing or bushing sold by Centerforce is the highest quality available. In most application the bearing is a direct Original Equipment (O.E.) replacement. Centerforce recommends changing the pilot bearing/bushing and release bearing during every clutch install.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1962 - Chevrolet K20 Pickup | V | 4638 | 8 Cyl 4.6L | 283 |
- Flywheel: Steel: Chevrolet: 1955-85 SBC: 1970-90 BBC: 168T: 30 lbs.
- Flywheel: Steel: Chevrolet: 1955-85 SBC: 1970-90 BBC: 2pc Rear Main: Internal Balance: 168T: 30 lbs.
- Product Attributes:
- SFI 1.1 Approved: Yes
- Engine Balance: Internal
- Quantity: Sold Individually.
- Pressure Plate Pattern 2: 11 In, 12 In, Borg & Beck/diaphragm
- Pressure Plate Style: Borg & Beck/diaphragm
- Pressure Plate Pattern 1: 10 In, 10.5 In, Borg & Beck/diaphragm
- Rear Main Seal Style: 2-piece
- Crankshaft to Flywheel Bolt Quantity: 6-bolt
- Crankshaft Bolt Hole Quantity: 6
- Make: Chevrolet
- Disc Diameter (in.): 10.500/11.000/12.000 In.
- Tooth Quantity: 168
- Replaceable Friction Surface: No
- Engine 1: 1955-85 Sbc 2pc Seal (large Register)
- Engine 2:
- 1970-1990 Bbc 2pc Seal (large Register)
- 1991-up Bbc 1pc Seal 454, 502, 572 (large Register)
- Weight:
- 30 Lbs.
- 30.000 Lbs.
- Engine 3: 1991-up Bbc 1pc Seal 454, 502, 572 (large Register)
- Marine Use: No
- Material: Billet Steel
- Ring Gear Tooth Quantity: 168-tooth
- Additional Counter Weight Kit Required: 560222
-
Features:
- • Billet Steel. • 1045 Steel Hardened Ring Gear. • SFI rated.
- McLeod steel flywheels are perfect for street applications where easy stop light acceleration is desired. Steel flywheels come in various weights and dimensions. For race applications, a heavier steel unit is ideal for helping launch a heavy car with a smaller engine with less torque and horsepower. They are CNC machined from billet alloy steel and have 1045 hardened steel ring gears.
Additional Fitment Information:
| Vehicle | Block | CC | Region | Engine | Sub Model | CID |
|---|---|---|---|---|---|---|
| 1962 - Chevrolet K20 Pickup | L | 4278 | United States | 6 Cyl 4.3L | Base | 261 |
Showing 1 - 10 of 30 products
Loading...