1967 Chevrolet G20 Van Transmission Parts
Choose your Part Name for your 1967 Chevrolet G20 Van
Automatic Transmission Dipstick
Automatic Transmission Extension Housing Seal
Automatic Transmission Flexplate
Automatic Transmission Oil Pump Seal
Clutch Flywheel
Clutch Flywheel Bolt
Clutch Fork
Clutch Pilot Bearing
Clutch Release Bearing
Manual Transmission Input Shaft Seal
Manual Transmission Output Shaft Seal
Transmission Clutch Kit
Transmission Filter Kit
Image
Product
Price
- Transmission Dipstick Kit; Locking; GM TH400 Trans; Includes Tube and Dipstick
- Locking; Includes Tube and Dipstick; THM400
- Transmission Dipstick Kit; Locking; Black Finish; Fits GM TH400 Transmissions; Includes Tube and Dipstick; Made from High-Quality Steel Material; Sold as One Kit
- Product Attributes:
- Transmission Type: Turbo 400
- Category: Transmission
- Feature/Benefit: ...because Nhra Says So.
- Applications: Gm Th400 Transmission
- Part Type: Transmission Dipstick
- Style: Locking
- Dipstick Location: Passenger Side
- Make: Gm
- ...because NHRA says so. No more tranny blowouts and fluid on the track with this affordable locking trans dipstick. Black finish. Computer formed for precise fit.
Additional Fitment Information:
| Vehicle |
|---|
| 1967 - Chevrolet G20 Van |
- Transmission Dipstick Kit; Locking; GM TH350 Trans; Includes Tube and Dipstick
- Locking; Includes Tube and Dipstick; THM350
- Transmission Dipstick Kit; Locking; Black CED Finish; Fits GM TH350 Transmissions; Includes Tube and Dipstick; Made from High-Quality Steel Material; Sold as One Kit
- Product Attributes:
- Transmission Type: Turbo 350
- Category: Transmission
- Feature/Benefit: ...because Nhra Says So.
- Applications: Gm Th350 Transmission
- Part Type: Transmission Dipstick
- Style: Locking
- Dipstick Location: Passenger Side
- Make: Gm
- ...because NHRA says so. No more tranny blowouts and fluid on the track with this affordable locking trans dipstick. Gold iridite finish. Computer formed for precise fit.
Additional Fitment Information:
| Vehicle |
|---|
| 1967 - Chevrolet G20 Van |
- Centerforce(R) II; Clutch Kit
- 12 in. Dia.; 3 Bolt Pattern; 10 Spline; 1 1/8 in. Input Shaft; 608 ft/lbs Torque; Includes Pressure Plate/Clutch Disc/Throw Out Bearing/Alignment Tool
- Centerforce(R) II Clutch Series utilizes our centrifugal weights and patented machining processes for superb holding power and maximum clutch life.
- Centerforce® II Clutch Kit
- Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warnings: This Product Can Expose You To Chemicals Including Nickel Compounds And Dusts Which Are Known To The State Of California To Cause Cancer. For More Information Visit Www.p65warnings.ca.gov. Wash Hands Following Installation.
-
Features:
- Patented Centrifugal Weight Design [where Applicable]
- Patented Ball Bearing Pressure Plate [where Applicable]
- Light Pedal Effort
- High Quality Friction Material
- Increased Holding Capacity
- Smooth Engagement
- The Centerforce(R) II Clutch Series utilizes a full facing disc with premium friction material and a pressure plate with centrifugal weights (where applicable). Furthermore, static clamp load is increased via our patented machining processes; this combination allows superb holding power and maximum clutch life, making this clutch ideal for selected street/strip, off-road and towing applications. Pressure plate and disc sold separately on some applications. The Torque Figures for Centerforce II Pressure Plates are based and calculated in conjunction with a Centerforce I & II Clutch Disc.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1967 - Chevrolet G20 Van | V | 4638 | 8 Cyl 4.6L | 283 |
- Bushing Oilite GM Stepped .400 Longer Than Stock .592 ID
- Bushing Oilite GM Stepped .400 Longer Than Stock .592 ID
- Product Attributes:
- NOTE: This Pilot Bushing Fits In The Outer Recess Of The Crank.
- ID (in): .590in.
- Secondary Step OD (in): 1.00in.
- OD (in): 1.709in.
- Thickness: .645in.
- Worn pilot bearings cause rough shifting, which can wear out your transmission. When you change your clutch, count on McLeod for high-quality pilot bearings and bushings to properly align your clutch with the crankshaft.
Additional Fitment Information:
| Vehicle | Block | CC | Transmission | Region | Engine | Sub Model | CID |
|---|---|---|---|---|---|---|---|
| 1967 - Chevrolet G20 Van | V | 4638 | Manual | United States | 8 Cyl 4.6L | Base | 283 |
- steel flywheel
- 168 Teeth; Zero Balance
- Steel flywheel Chevy 1955-85/262-427/0 bal./168T
- Steel Flywheel
-
Features:
- Dynamically Balanced Within 1/2 oz./in. Of Factory Specifications
- Surface Ground For Optimum Disc Mating Surface
- Strictly Factory Warranty Only
- The flywheel accepts one half of the load of the clutch system. To realize the potential of the clutch system, the flywheel must be flat, parallel to the crankshaft flange, properly surface ground for maximum friction compatibility with the clutch disc, and balanced. Dyno testing proves that flywheel balance is critical to achieving maximum engine service. Every RAM flywheel is dynamically balanced to within ? ounce/inch of the factory specification. RAM aluminum flywheels have a .250 inch thick steel friction insert to handle the heat generated under extreme conditions, while allowing resurfacing without the need to replace the insert. All RAM flywheels are manufactured from SFI certified materials in our South Carolina facility.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1967 - Chevrolet G20 Van | V | 4638 | 8 Cyl 4.6L | 283 |
- steel flywheel
- 153 Teeth; 10.5 B/B And Diaphragm
- Lightweight Steel flywheel Chevy 305-350/63-85/0 balance/153T/10.5 B/B/Diaphragm
- Steel Flywheel
-
Features:
- Dynamically Balanced Within 1/2 oz./in. Of Factory Specifications
- Surface Ground For Optimum Disc Mating Surface
- Strictly Factory Warranty Only
- The flywheel accepts one half of the load of the clutch system. To realize the potential of the clutch system, the flywheel must be flat, parallel to the crankshaft flange, properly surface ground for maximum friction compatibility with the clutch disc, and balanced. Dyno testing proves that flywheel balance is critical to achieving maximum engine service. Every RAM flywheel is dynamically balanced to within ? ounce/inch of the factory specification. RAM aluminum flywheels have a .250 inch thick steel friction insert to handle the heat generated under extreme conditions, while allowing resurfacing without the need to replace the insert. All RAM flywheels are manufactured from SFI certified materials in our South Carolina facility.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1967 - Chevrolet G20 Van | V | 4638 | 8 Cyl 4.6L | 283 |
- HDX clutch set
- 10.5 x 1 1/8-10 Spline
- HDX clutch set 1955-85 GM Diaphragm 10.5 x 1 1/8-10
- HDX Clutch Set
-
Features:
- Built With 30 Percent More Clamp Pressure Than Stock
- Smooth
- Chatter Free Operation
- Premium Organic Composite Disc Friction Material
- Exclusive 8-Spring Hub Assembly Where Applicable
- Great Drivability
- Use For Power Levels To 450 HP
- Includes Pressure Plate/Disc/Release Bearing/Alignment Tool
- The basic RAM concept of clutch performance is simple: Increased clamp pressure is the single most effective way to manage high horsepower or load, especially in street driven performance cars. We purpose build RAM HDX pressure plates with 30% more clamp pressure than stock. The second important feature is smooth, chatter free operation, which we achieve with premium organic composite disc friction material. Also, HDX discs feature our exclusive 8-spring hub assembly for added load capacity. HDX. Great driveability and control for power levels to 450 horsepower. Sets include pressure plate, disc, release bearing, and alignment tool unless otherwise noted.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1967 - Chevrolet G20 Van | V | 4638 | 8 Cyl 4.6L | 283 |
- aluminum flywheel
- 0 Balance; 168 Teeth
- Aluminum flywheel Chevy 1955-85/262-427/0 bal./168T
- Aluminum Flywheel
-
Features:
- Dynamically Balanced Within 1/2 oz./in. Of Factory Specifications
- .250 in. Thick Steel Friction Insert
- Surface Ground For Optimum Disc Mating Surface
- Strictly Factory Warranty
- The flywheel accepts one half of the load of the clutch system. To realize the potential of the clutch system, the flywheel must be flat, parallel to the crankshaft flange, properly surface ground for maximum friction compatibility with the clutch disc, and balanced. Dyno testing proves that flywheel balance is critical to achieving maximum engine service. Every RAM flywheel is dynamically balanced to within ? ounce/inch of the factory specification. RAM aluminum flywheels have a .250 inch thick steel friction insert to handle the heat generated under extreme conditions, while allowing resurfacing without the need to replace the insert. All RAM flywheels are manufactured from SFI certified materials in our South Carolina facility.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1967 - Chevrolet G20 Van | V | 4638 | 8 Cyl 4.6L | 283 |
- pilot bushing/bearing
- 0.592 in. ID; 1.094 in. OD; 0.75 in. Length
- Pilot bushing/bearing AMC; General Motors; Jeep
- Product Attributes:
- Inside Diameter: 0.592 In.
- Outside Diameter: 1.094 In.
- Overall Length: 0.750 In.
-
Features:
- Pilot Bushing/Bearing
- Strictly Factory Warranty Only
- Premium replacement pilot bearings and bushings complete your clutch install for a long, trouble free life of operation.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1967 - Chevrolet G20 Van | V | 4638 | 8 Cyl 4.6L | 283 |
- Standard SFI; Internal Balance; 168 Tooth; 10.75 in. and 11.5 in. Bolt Circle
- Automatic Transmission Flexplate; Standard SFI; Internal Balance; 168 Tooth; 10.75 in. and 11.5 in. Bolt Circle;
- Automatic Transmission Flexplate
- Product Attributes:
- California Proposition 65 Chemical Name 1: Cadmium And Cadmium Compounds
- WARNING CA Proposition 65: No
- SFI Certification Sticker: Included
- SFI Approved: Yes
- Crankshaft Bolt Hole Quantity: 6
- Dual Pattern: No
- Item Weight: 7.000 Lbs.
- Balance: Internal
- NHRA Accepted: Yes
- Outside Diameter: 14.100 In.
- IHRA Legal: Yes
- Timing Marks: 168
-
Features:
- NHRA/IHRA Legal For All Classes
- Includes SFI Certification Sticker
- Ideal For Street Applications
- To Extreme Duty Racing
- To High RPM Use
- As performance levels increase, an O.E. style flexplate just wont cut it and a stronger option is a necessity to prevent transmission and/or converter failure. B&M has you covered with our high performance SFI approved flexplate designed for 1955-1985 GM small block (internally balanced) V8 engines along with 4.3L V6 engines. Also fits 1965-up GM big block (internally balanced) V8 engines with two piece rear main seal. Features include high tensile strength steel construction to resist elongation and cracking, dual bolt pattern 10.75 or 11.5 inch converter mounting locations, 168 tooth ring gear with double-sided welds for added strength and comes with SFI 29.1 safety certification insuring the ultimate in safety and performance. The assembly is then Zinc plated and treated with a Chromate Conversion Coating for added corrosion resistance and durability. B&M SFI approved flexplates are ideal for extreme duty race applications as well as street cars, tow vehicles or other vehicles needing the added protection and toughness that B&M has been delivering since 1953.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Transmission Manuf. Code | CID |
|---|---|---|---|---|---|
| 1967 - Chevrolet G20 Van | V | 4638 | 8 Cyl 4.6L | Powerglide | 283 |
Showing 1 - 10 of 28 products
Loading...