1976 Dodge W200 Transmission Parts
Choose your Part Name for your 1976 Dodge W200
Automatic Transmission Extension Housing Seal
Automatic Transmission Kickdown
Automatic Transmission Oil Pump Seal
Automatic Transmission Shift Lever Kit
Automatic Transmission Torque Converter
Clutch Flywheel Bolt
Clutch Flywheel Bolt Set
Clutch Release Bearing
Manual Transmission Input Shaft Bearing
Manual Transmission Input Shaft Race
Transmission Clutch Kit
Transmission Clutch Pressure Plate
Transmission Clutch Pressure Plate Bolt
Transmission Filter Kit
Transmission Oil Pan
Image
Product
Price
- U-Cut-To-Fit; Includes Aluminum Fittings w/Ferrule/Instructions; Stainless Steel Housing; Stainless Steel Finish
- Hi-Tech Kickdown Kit; U-Cut-To-Fit; Includes Aluminum Fittings w/Ferrule/Instructions; Stainless Steel Housing; Stainless Steel Finish;
- Hi-Tech Kickdown Kit
- Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov.
- Trans Model: Chrysler- Torqueflite A727 (auto) 3 Speed
-
Features:
- U-Cut-To-Fit Design Works In Any Application
- Specially Extruded Liner For Extended Cable Life
- Aluminum Ferrule To Eliminate Fraying
- Made In The U.S.A.
- Lifetime Warranty
- Lokars U-Cut-to-Fit Kickdown Cables are available in either stainless steel braided housing, black stainless steel braided housing or black housing. They are designed with a specially extruded liner for extended life of the cable – not to be confused with ordinary brake hose. Kickdown features aluminum fittings with ferrule to eliminate frayed cable ends. Kickdowns are adaptable for all types of manifolds including tunnel ram, blower manifolds and Weber induction systems. Mount our kickdown with our Stainless Steel Carburetor Bracket and Return Springs (sold separately). Complete instructions included in kit. Polished kickdown cables will include polished aluminum fittings. Black Hi-Tech stainless cables will include black anodized aluminum fittings.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Transmission Manuf. Code | CID |
|---|---|---|---|---|---|
| 1976 - Dodge W200 | V | 7211 | 8 Cyl 7.2L | A727 (36RH) | 440 |
- Centerforce(R) Accessories; Throw Out Bearing/Clutch Release Bearing
- Flat Face; 1.625 in. Height; 2.740 in. Major Outside Diameter; 1.255 in. Inside Diameter; Clip Retension
- Each Throw Out Bearing (Release Bearing) sold by Centerforce is the highest quality available. In most application the bearing is a direct Original Equipment (O.E.) replacement.
- Throwout Bearing
- Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warnings: This Product Can Expose You To Chemicals Including Nickel Compounds And Dusts; Which Are Known To The State Of California To Cause Cancer. For More Information; Visit Www.p65warnings.ca.gov. Wash Hands Following Installation.
-
Features:
- Throwout Bearing
- Throw Out Bearing (Release Bearing) sold by Centerforce is the highest quality available. In most application the bearing is a direct Original Equipment (O.E.) replacement. Centerforce recommends changing the pilot bearing/bushing and release bearing during every clutch install.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1976 - Dodge W200 | V | 7211 | 8 Cyl 7.2L | 440 |
- Centerforce(R) I; Clutch Pressure Plate
- 11 in. Dia.; 3 Bolt Pattern; 522 ft/lbs Torque; Flat; Nodular Iron Pressure Plate
- The Centerforce(R) I Clutch Pressure Plate has been designed as a high-quality entry-level performance pressure plate for those in need of a superior stock replacement (disc sold separately).
- Centerforce I Clutch Pressure Plate
- Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warnings: This Product Can Expose You To Chemicals Including Nickel Compounds And Dusts; Which Are Known To The State Of California To Cause Cancer. For More Information; Visit Www.p65warnings.ca.gov. Wash Hands Following Installation.
- Diameter (in.): 11.000 In.
-
Features:
- Patented Centrifugal Weight Design [where Applicable]
- High Quality Friction Material
- Light Pedal Effort
- Smooth Engagement
- The Centerforce(R) I, Clutch Pressure Plate has been designed as a high-quality entry-level performance pressure plate for those in need of a superior stock replacement (disc sold separately). Using the Centerforce centrifugal weight system (where applicable). The Centerforce I clutch system is perfect for applications with stock engines or mild power increases from minor bolt-on modifications. The torque figures for Centerforce I Pressure Plates are based and calculated in conjunction with a Centerforce I & II clutch disc.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1976 - Dodge W200 | V | - | 8 Cyl 5.9L | 360 |
- Megashifter Automatic Shifter
- For GM TH400,350,250,200,700R4,2004R, Ford C4,C6 and AOD, Mopar 727 and 904
- Megashifter Automatic Shifter; Ratchet 3/4-Speed; Floor; Fits w/TH400/350/250/200/700R4/4L60/4L60E/4L65E/4L80E/C4/C5/C6/AOD/AODE/4R70W/E40D/4R100/1966-Up 727/904 Trans;
- Product Attributes:
- Automotive Item Grade: High Performance
- Backup Light Switch: Yes
- California Proposition 65 Chemical Name 4: Alprazolam
- California Proposition 65 Chemical Name 3: Acifluorfen Sodium
- Cover Included: Yes
- California Proposition 65 Chemical Name 2: Abiraterone Acetate
- Shift Lever Length: 12.610 In.
- California Proposition 65 Chemical Name 1: A-alpha-c (2-amino-9h-pyrido[2,3-b]indole)
- Mechanism: Ratchet
- WARNING CA Proposition 65: No
- Neutral Safety Switch Included: Yes
- Indicator Light Included: Yes
- NHRA Accepted: Yes
- Cable Included: Yes
- Trans Model:
- Chrysler- Torqueflite A727 (auto) 3 Speed
- Chrysler- Torqueflite A904 (auto) 3 Speed
- Ford- Aod (auto) 4 Speed
- Ford- C- 4 (auto) 3 Speed
- Ford- C- 6 (auto) 3 Speed
- Gm- Th200 (auto) 3 Speed
- Gm- Th200 4r (auto) 4 Speed
- Gm- Th250 (auto) 3 Speed
- Gm- Th350 (auto) 3 Speed
- Gm- Th400 (auto) 3 Speed
- Gm- Th700 R4 (auto) 4 Speed
-
Features:
- Universal Floor Mount
- Base Can Be Trimmed-Custom Fit
- Cable Operated
- Quick Installation
- Accurate Shifting
- Reverse Lockout Feature
- Includes Neutral Safety Switch
- Includes Backup Light Switch
- The B&M MegaShifter has it all, form, function and classic style. This all adds up to bring you a quality shifter thats been one of the most popular automatic shifters of all time. First off lets talk function. The MegaShifters positive ratcheting function wont allow you to over shift and miss a gear at that critical moment, along with the reverse lockout feature meets NHRA/IHRA safety rules for those weekend grudge races at the track. The look and feel of the T-handle and accordion style shift boot really shows off the racing heritage of the MegaShifter. Other features include a black console that you can trim to fit your vehicles floor for a perfect fit, 5 foot shifter cable, cable brackets, transmission shift levers, chrome plated top plate with lighted gear indicator and everything needed for an easy at home installation. An optional T-handle with a 12-volt button is available separately for actuating a trans-brake, nitrous oxide or other accessories for the hard-core performance enthusiast. This shifter comes with all necessary parts for use with three and four-speed automatic transmissions such as 1966 and later Chrysler Torqueflite A727, A904, A500, and A518 transmissions. Ford C4, C6 transmissions. GM models TH 200, TH250, TH350, TH400, 2004R, 700R4, 4L60, 4L60E - 4L85E without PRNDL switch transmissions. For Ford AOD transmissions you will need installation kit #40496, AODE and 4R70W require installation kit #40504, E40D and 4R100 require installation kit #40505 and GM 4L60E - 4L85E transmissions with PRNDL switch require cable bracket #70499. Overall Dimensions - 13L x 6.6W x 12.6H
Additional Fitment Information:
| Vehicle | Transmission | Trans. Speed | Transmission Manuf. Code |
|---|---|---|---|
| 1976 - Dodge W200 | Automatic | 3 | A727 (36RH) |
- Unimatic Automatic Shifter
- For GM TH400,350,250,200,700R4,2004R, Ford C4,C6 and AOD, Mopar 727 and 904
- Unimatic Automatic Shifter; Floor; Includes Shifter Assembly/Black Handle/5 ft. Cable/Boot; Chrome; Fits w/TH400/350/350/200/700R4/4L60/4L60E/4L65E/4L80E/C4/C5/C6/AODE/4R70W/727/904;
- Product Attributes:
- Automotive Item Grade: High Performance
- Backup Light Switch: No
- California Proposition 65 Chemical Name 4: Alprazolam
- California Proposition 65 Chemical Name 3: Acetochlor
- California Proposition 65 Chemical Name 2: Abiraterone Acetate
- Shift Lever Length: 12.720 In.
- California Proposition 65 Chemical Name 1: A-alpha-c (2-amino-9h-pyrido[2,3-b]indole)
- Mechanism: Detent
- WARNING CA Proposition 65: No
- Neutral Safety Switch Included: Yes
- Indicator Light Included: No
- NHRA Accepted: Yes
- Cable Included: Yes
- Trans Model:
- Chrysler- Torqueflite A727 (auto) 3 Speed
- Chrysler- Torqueflite A904 (auto) 3 Speed
- Ford- Aod (auto) 4 Speed
- Ford- C- 4 (auto) 3 Speed
- Ford- C- 6 (auto) 3 Speed
- Gm- Th200 (auto) 3 Speed
- Gm- Th200 4r (auto) 4 Speed
- Gm- Th250 (auto) 3 Speed
- Gm- Th350 (auto) 3 Speed
- Gm- Th400 (auto) 3 Speed
- Gm- Th700 R4 (auto) 4 Speed
-
Features:
- Ideal As Column Shift Replacement
- Includes Neutral Safety Switch
- Includes Black T-Handle
- Backup Light Not Available
- Includes 5 ft. Cable and Hardware
- Includes Boot and Plate
- The B&M Unimatic is one of our easiest shifters to install and operate. Our engineers designed this performance automatic shifter to resemble a manual 4-speed shifter. This shifter uses the factory transmission detents for easy positive shifts and is an ideal replacement for moving your column shift down to the floor for a sporty look and its capable of operating most popular 3 & 4-speed automatic transmissions (may require optional cable bracket and shift lever kits.) Dont let its simplistic look fool you, while it maybe not be as sophisticated or offer all the features of our line of proven race shifters, this unit is just as durable and trouble-free and is backed by our Lifetime Limited Warranty. Includes a shift boot, neutral safety switch, 5-foot Performance shift cable, cable brackets, shift levers and all necessary hardware for an easy installation you can do at home.
Additional Fitment Information:
| Vehicle | Transmission | Trans. Speed | Transmission Manuf. Code |
|---|---|---|---|
| 1976 - Dodge W200 | Automatic | 3 | A727 (36RH) |
- 2300 - 2500 RPM Stall; 10 in. Bolt Circle
- Holeshot 2400 Torque Converter; 2300 - 2500 RPM Stall; 10 in. Bolt Circle;
- Holeshot 2400 Torque Converter
- Product Attributes:
- Lock Up Type: No
- Trans Year:
- 1967
- 1968
- 1969
- 1970
- 1971
- 1972
- 1973
- 1974
- 1975
- 1976
- 1977
- 1978
- 1979
- 1980
- 1981
- Automotive Item Grade: High Performance
- WARNING CA Proposition 65: No
- Flexplate Change Needed: Yes
- Stall Speed (RPM): 2300-2500
- Furnace-Brazed: Yes
- Trans Model: Chrysler- Torqueflite A727 (auto) 3 Speed
-
Features:
- Furnace Brazed Impeller
- Steel Alloy Pump Drive Tube
- Heavy Duty Needle Bearing
- Between Stator and Turbine
- Furnace Brazed Turbine
- New Turbine Hub
- New Springs/Rollers In Stator
- B&M Holeshot 2400 for 1967-81 Chrysler, Dodge, Plymouth Torqueflite A727 automatic transmissions (Non-lock-up) with 24 spline input and a 10-inch bolt circle. The Holeshot 2400 converter is good for vehicles with some performance engine modifications, particularly big cams that tend to reduce low-end power and torque. The higher stall speed of this converter will launch the car in a higher rpm range where more torque is readily available, resulting in quicker acceleration. Holeshot converters feature furnace brazed impeller fins and turbine, new precision alloy impeller hub and new heavy duty needle bearings. Other features include fully balanced and pressure tested by expert technicians. If your vehicle is equipped with a plate type nitrous system or supercharger, please refer to the Nitrous Holeshot line of converters. Notes: Stall speed listings are based on engines producing 230lb ft of torque at 2,500 rpm. More torque at 2,500 rpm will give you more stall speed, less torque at 2,500 rpm will give you less stall speed than the stall speed ratings indicated. Higher stall converters can generate more heat, so we highly recommend adding a transmission cooler. This converter is Not recommended for supercharged, plate-type nitrous oxide or trans-brake applications. The product images shown are for illustration purposes only and may not be an exact representation of the product.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Transmission Manuf. Code | CID |
|---|---|---|---|---|---|
| 1976 - Dodge W200 | V | 7211 | 8 Cyl 7.2L | A727 (36RH) | 440 |
- Street Pro: Clutch Kit: Mopar 1963-03: 10.5 x 1 x 23
- Street Pro: Clutch Kit: Mopar 1963-03: 10.5 x 1 x 23 Spline
- Product Attributes:
- Pilot Bushing Material: Bronze Oilite
- Counterweight Assist: No
- Quantity: Sold As A Kit.
- Pressure Plate Style: Diaphragm
- Application: 1963-03 Mopar
- Alignment Tool Included: Yes
- Disc Material: Organic
- Pilot Bushing Included: Yes
- Clutch Disc Quantity: 1
- Input Shaft Diameter: 1.000
- Horsepower Rating: 400
- Make: Mopar
- Hub Style: Sprung
- Disc Diameter (in.):
- 10.5 In.
- 10.500
- Input Shaft Quantity: 23
- Clutch Usage: Performance
- Disc Style: Full Face
- Throwout Bearing Included: Yes
- Flywheel Included: No
-
Features:
- • High Performance Street Upgrade. • Organic Lined Sprung Hub Disc. • Excellent Street Drivability. • Smooth, Even Engagement.
- The Street Pro is the perfect choice for an entry level performance clutch for the street. We recommend it for cars up to 400hp (depending on part number) with mild engine mods and street tires. Included is a high clamp load pressure plate, an organic disc for smooth and even engagement with increased holding power over stock. Our kits are complete with Pressure Plate, Disc, throw out bearing (where applicable) pilot bushing (where applicable) and alignment tool. If you are looking for a clutch that's a great step up from your stock set up, the McLeod Street Pro is the clutch for you.
Additional Fitment Information:
| Vehicle | Block | CC | Transmission | Engine | Sub Model | CID |
|---|---|---|---|---|---|---|
| 1976 - Dodge W200 | V | 6556 | Manual | 8 Cyl 6.6L | Base | 400 |
- Clutch Pressure Plate Bolt Kit: 3/8in x 16: Small Hex Head: Set of 6
- Clutch Pressure Plate Bolt Kit: 3/8in x 16: Small Hex Head: Set of 6
- Product Attributes:
- Thread Size: 3/8in X 16
- Nuts Included: No
- Quantity:
- Pack Of 6
- Sold As A Set Of 6.
- Fastener Color: Black
- Fastener Head Style:
- Hex
- Hex Head
- Washers Included: No
- Fastener Finish: Black Oxide
- Underhead Length: .910in.
- Fastener Style: Bolt
- Underhead Length (in.): 0.91
- Wrench Diameter: 1/2in.
- Fastener Material: Steel
-
Features:
- All McLeod Racing hardware is quality Grade 8 Hardware that is to made proprietary to McLeod Racings specs. We also are proud to use ARP the world wide leader in performance hardware in some parts numbers.
- McLeod pressure plate bolts fasten your pressure plate to your flywheel for durable bolt-on performance. The bolts come in various thread sizes and styles to ensure a correct fit for your specific vehicle application. They are manufactured from premium-grade steel and sport a black oxide finish to resist corrosion. When it comes to bolt-on performance, make McLeod your parts connection and get the most out of your ride.
Additional Fitment Information:
| Vehicle | Block | CC | Region | Engine | Sub Model | CID |
|---|---|---|---|---|---|---|
| 1976 - Dodge W200 | V | 7211 | United States | 8 Cyl 7.2L | Base | 440 |
- Stealth Pro Ratchet Automatic Shifter
- Stealth Pro Ratchet Automatic Shifter; 3/4 Speed; Floor; w/Cover; Includes Shifter Assembly/5 ft. Super Duty Race Cable/Brackets; Black Anodized;
- Product Attributes:
- California Proposition 65 Chemical Name 5: Altretamine
- Automotive Item Grade: High Performance
- Backup Light Switch: Yes
- California Proposition 65 Chemical Name 4: Alprazolam
- California Proposition 65 Chemical Name 3: Acifluorfen Sodium
- Cover Included: Yes
- California Proposition 65 Chemical Name 2: Abiraterone Acetate
- Shift Lever Length: 12.040 In.
- California Proposition 65 Chemical Name 1: A-alpha-c (2-amino-9h-pyrido[2,3-b]indole)
- Mechanism: Ratchet
- WARNING CA Proposition 65: No
- Neutral Safety Switch Included: Yes
- Indicator Light Included: No
- NHRA Accepted: Yes
- Cable Included: Yes
- Trans Model:
- Chrysler- Torqueflite A727 (auto) 3 Speed
- Chrysler- Torqueflite A904 (auto) 3 Speed
- Ford- Aod (auto) 4 Speed
- Ford- C- 4 (auto) 3 Speed
- Ford- C- 6 (auto) 3 Speed
- Gm- Th200 (auto) 3 Speed
- Gm- Th250 (auto) 3 Speed
- Gm- Th350 (auto) 3 Speed
- Gm- Th400 (auto) 3 Speed
- Gm- Th700 R4 (auto) 4 Speed
-
Features:
- Reverse Lockout Meets NHRA And IHRA Requirements
- Carbon Fiber Look Without The Cost
- Reliable And Race Proven Shifter Design
- The Magnum Grip Stealth Pro Ratchet shifter is one of our most popular and easiest to operate race shifters. Features include positive ratcheting design that self-centers the handle after each shift giving you maximum clearance behind the shifter and will not allow you to miss a shift by over-shifting a gear. The reverse lockout feature only requires one-hand to operate and meets both NHRA and IHRA safety regulations for racing. Other features include a neutral safety switch, backup light switch, along with a simulated carbon fiber wrapped aluminum cover. The cover is treated to a high quality hydro-dip process and material to add a high-tech and realistic carbon look to your vehicles interior, but at a substantial cost savings versus carbon fiber. This shifter includes our Magnum Grip shift handle with replaceable side grip plates, tough black anodized finish, 5-foot long Super-duty shift cable, gear indicator, cable brackets and transmission levers for use with most popular 3-speed transmissions. Comes with all necessary hardware and detailed instructions for an easy at home installation. Be sure to check out all the optional side grip Comes with all necessary parts for use with three and four-speed automatic transmissions such as 1966 and later Chrysler Torqueflite A727, A904, A500, A518, Ford C4, C5, C6, GM TH200, TH250, TH350, TH400, 2004R, 700R4, 4L60, 4L60E - 4L85E without PRNDL switch. Notes: Ford AOD transmissions require installation kit #40496, AODE and 4R70W require installation kit #40504, E40D and 4R100 require installation kit #40505 and GM 4L60E - 4L85E transmissions with PRNDL switch require cable bracket #70499. Overall dimensions - 10.75L x 2.9W x 12H
Additional Fitment Information:
| Vehicle | Transmission | Trans. Speed | Transmission Manuf. Code |
|---|---|---|---|
| 1976 - Dodge W200 | Automatic | 3 | A727 (36RH) |
- QuickSilver Automatic Shifter Assembly
- For GM TH400,350,250,200,700R4,2004R, Ford C4,C6 and AOD, Mopar 727 and 904
- QuickSilver Automatic Shifter Assembly; Ratchet 3/4-Speed; Floor; Fits w/TH400/350/250/200/700R4/4L60/4L60E/4L65E/4L80E/C4/C5/C6/AOD/AODE/4R70W/E40D/4R100/1966-Up 727/904 Trans;
- Product Attributes:
- Automotive Item Grade: High Performance
- Backup Light Switch: Yes
- California Proposition 65 Chemical Name 3: Acetochlor
- Cover Included: Yes
- California Proposition 65 Chemical Name 2: Abiraterone Acetate
- Shift Lever Length: 12.230 In.
- California Proposition 65 Chemical Name 1: A-alpha-c (2-amino-9h-pyrido[2,3-b]indole)
- Mechanism: Ratchet
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Neutral Safety Switch Included: Yes
- Indicator Light Included: Yes
- NHRA Accepted: Yes
- Cable Included: Yes
- Trans Model:
- Chrysler- Torqueflite A727 (auto) 3 Speed
- Chrysler- Torqueflite A904 (auto) 3 Speed
- Ford- Aod (auto) 4 Speed
- Ford- C- 4 (auto) 3 Speed
- Ford- C- 6 (auto) 3 Speed
- Gm- Th200 (auto) 3 Speed
- Gm- Th200 4r (auto) 4 Speed
- Gm- Th250 (auto) 3 Speed
- Gm- Th350 (auto) 3 Speed
- Gm- Th400 (auto) 3 Speed
- Gm- Th700 R4 (auto) 4 Speed
-
Features:
- Universal Floor Mount Application
- Base Trimmed For Custom Fit
- Cable Operated
- Quick Installation
- Accurate Shifting
- NHRA/IHRA Reverse Lockout Meets Requirements
- Includes Neutral Safety Switch
- Includes Backup Light Switch
- Easy to use, good looks and dependable ratcheting design makes the QuickSilver one of our most popular shifters. Features a trigger-less shift handle for a clean modern design. To access Reverse or Forward gears you simply lift the handle and pull back and let the handle drop in gear. Theres no need to lift the handle again to shift gears until you either need to access Reverse or Park. From Drive, lift the handle straight up and this will bypass the reverse lockout safety feature, then move the shift handle forward into Reverse or Park. Its just that easy! Also, the reverse lockout feature meets NHRA and IHRA safety regulations and wont allow you to accidentally over shift into reverse while making a pass at the strip. To use the ratcheting function at the strip, shift into low gear, launch the vehicle and hit the shifter forward when its time to shift. You cannot over-shift and miss a gear. The chrome bezel, shift stick, and knob are all accented by the black console, flat boot, and deep blue medallion, giving your vehicles interior that classic muscle car style while providing fast and smooth ratchet shifting. The shifter includes a lighted gear position indicator in the bezel, a micro-switch for back-up lights and a neutral safety switch preventing accidental starts when in gear. Includes a 5-foot long performance shift cable, cable bracket, trans shift lever, all hardware and detailed instructions for an easy installation you can do at home. Compatible with TH350, TH400, 700R4, 200R4, 4L60, 4L60E - 4L80E transmissions (w/o PRNDL switch) right out of the box. Notes: Ford AOD transmissions require installation kit #40496, AODE and 4R70W require installation kit #40504, E40D and 4R100 require installation kit #40505 and GM 4L60E - 4L85E transmissions with PRNDL switch require cable bracket #70499. Overall Dimensions - 12.25 x 6.21 x 12.25
Additional Fitment Information:
| Vehicle | Transmission | Trans. Speed | Transmission Manuf. Code |
|---|---|---|---|
| 1976 - Dodge W200 | Automatic | 3 | A727 (36RH) |
Showing 1 - 10 of 28 products
Loading...