1995 Dodge Ram 3500 Transmission Parts
Choose your Part Name for your 1995 Dodge Ram 3500
Automatic Transmission Control Module
Automatic Transmission Extension Housing Seal
Automatic Transmission Flexplate
Automatic Transmission Oil Pump Seal
Clutch Flywheel
Clutch Flywheel Bolt
Clutch Flywheel Bolt Set
Clutch Fork
Clutch Fork Spring
Clutch Master Cylinder
Clutch Pilot Bearing
Clutch Pilot Bushing
Clutch Pivot Ball
Clutch Release Arm
Clutch Release Bearing
Clutch Release Bearing and Slave Cylinder Assembly
Clutch Slave Cylinder
Manual Transmission Countershaft Bearing
Manual Transmission Countershaft Race
Manual Transmission Extension Housing Seal
Manual Transmission Input Shaft Bearing
Manual Transmission Input Shaft Race
Manual Transmission Input Shaft Seal
Manual Transmission Output Shaft Bearing
Manual Transmission Output Shaft Seal
Transmission Filter Kit
Transmission Oil Filter
Transmission Oil Pan
Transmission Oil Pan Gasket
Image
Product
Price
- Centerforce(R) Accessories; Throw Out Bearing/Clutch Release Bearing
- Flat Face; 1.623 in. Height; 2.737 in. Major Outside Diameter; 1.440 in. Inside Diameter; Clip Retension
- Each Throw Out Bearing (Release Bearing) sold by Centerforce is the highest quality available. In most application the bearing is a direct Original Equipment (O.E.) replacement.
- Throwout Bearing
- Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warnings: This Product Can Expose You To Chemicals Including Nickel Compounds And Dusts; Which Are Known To The State Of California To Cause Cancer. For More Information; Visit Www.p65warnings.ca.gov. Wash Hands Following Installation.
-
Features:
- Throwout Bearing
- Throw Out Bearing (Release Bearing) sold by Centerforce is the highest quality available. In most application the bearing is a direct Original Equipment (O.E.) replacement. Centerforce recommends changing the pilot bearing/bushing and release bearing during every clutch install.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1995 - Dodge Ram 3500 | V | - | 8 Cyl 5.9L | 360 |
- Clutch Release Pivot;
- Clutch Release Pivot
-
Features:
- Clutch Release Pivot
- Crown Automotive is the premiere manufacturer and distributor of quality replacement parts for Jeep(R) CJ(TM), Wrangler(TM), Cherokee(TM), Grand Cherokee(TM), Liberty(TM), and Commander(TM). With over 8,000 different parts in stock for Jeep(R) vehicles from 1942 on up, Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory-discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission and transfer case components. Crown Automotive also offers an exclusive line of component kits and accessory products. Because we know that Jeeps are driven harder than most other vehicles, we emphasize offering only quality parts. In fact, we test parts on Jeeps before distributing them to our dealers to insure that they meet our standards for quality. Crown also supports its entire line with a 12 month/12,000 mile warranty to insure our dealers and their customers of our commitment to offering quality parts.
Additional Fitment Information:
| Vehicle |
|---|
| 1995 - Dodge Ram 3500 |
- Pivot
- Clutch Fork Spring; Pivot;
- Clutch Fork Spring
-
Features:
- Clutch Fork Spring
- Crown Automotive is the premiere manufacturer and distributor of quality replacement parts for Jeep(R) CJ(TM), Wrangler(TM), Cherokee(TM), Grand Cherokee(TM), Liberty(TM), and Commander(TM). With over 8,000 different parts in stock for Jeep(R) vehicles from 1942 on up, Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory-discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission and transfer case components. Crown Automotive also offers an exclusive line of component kits and accessory products. Because we know that Jeeps are driven harder than most other vehicles, we emphasize offering only quality parts. In fact, we test parts on Jeeps before distributing them to our dealers to insure that they meet our standards for quality. Crown also supports its entire line with a 12 month/12,000 mile warranty to insure our dealers and their customers of our commitment to offering quality parts.
Additional Fitment Information:
| Vehicle |
|---|
| 1995 - Dodge Ram 3500 |
- Taper Bearing Cup
- National LM102910 Taper Bearing Cup
- Product Attributes:
- Cup Length (Inch): 0.6200
- Cup Bore (Inch): 2.8910
- Cup Radius (MM): 0.7870
- Cup Radius (Inch): 0.0310
- Cup Bore (MM): 73.4310
- Part Description: Taper Bearing Cup
- Manufactured with premium-grade steel, National® taper bearing cups feature crowned raceways to ensure even load distribution.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
051-3632, 0927273, 0K01A-33-047, 12350939, 15637265, 2881193, 38-01524, 38-91510, 399934C1, 399935C91, 400988C1, 400989C91, 408007C1, 408008C91, 4637691, 4637785, 4637961, 5-1021...VIEW MORE
Additional Fitment Information:
| Vehicle | Transmission | Position | Trans. Speed | Transmission Manuf. Code |
|---|---|---|---|---|
| 1995 - Dodge Ram 3500 | Manual | Front | 5 | NV4500 |
- Taper Bearing Cone
- National LM102949 Taper Bearing Cone
- Product Attributes:
- Cone Bore (Inch): 1.7812
- Cone Radius (Inch): 0.1400
- Cone Radius (MM): 3.5560
- Cone Length (Inch): 0.7800
- Cone Bore (MM): 45.2420
- Cone Length (MM): 19.8120
- Part Description: Taper Bearing Cone
- Manufactured with premium-grade steel, National® taper bearing cones feature crowned raceways and rollers to ensure even load distribution.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
0927270, 10033471, 15637269, 2881194, 399933C91, 400987C91, 408006C91, 4637705, 506056, 52009574, 52069915AA, 5356661, 550966, 565965, 7J8210, 9436776, 9440844, BC2Z4221A...VIEW MORE
Additional Fitment Information:
| Vehicle | Transmission | Position | Trans. Speed | Transmission Manuf. Code |
|---|---|---|---|---|
| 1995 - Dodge Ram 3500 | Manual | Front | 5 | NV4500 |
- WIX Automatic Transmission Filter Kit
- Product Attributes:
- California Proposition 65: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Inner Diameter Top: Closed
- Duty Type: Ld
- Class: A
- Automatic transmission filters feature design and construction that ensure no unfiltered fluid can bypass the application specific filtration media. Lock seamed and sealed assemblies and application specific sealing components ensure complete filtration. WIX transmission filter kits include sealing gaskets specifially designed for use with today's sophisticated transmission fluids
This Part Fits the Following OEM/Substitute Numbers:
0440226, 103, 104, 104B, 12339136, 12360660, 12776D, 14169, 14942, 14943, 14944, 17470, 17957, 18032, 19950, 19968, 2229017, 230...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Region | Engine | CID |
|---|---|---|---|---|---|
| 1995 - Dodge Ram 3500 | L | - | Canada | 6 Cyl 5.9L | 359 |
- Taper Bearing Cone
- with New Process 4500HD Transmission
- National M802048 Taper Bearing Cone
- Product Attributes:
- Cone Bore (Inch): 1.6250
- Cone Radius (Inch): 0.1400
- Cone Radius (MM): 3.5560
- Cone Length (Inch): 1.0100
- Cone Bore (MM): 41.2750
- Cone Length (MM): 25.6540
- Part Description: Taper Bearing Cone
- Manufactured with premium-grade steel, National® taper bearing cones feature crowned raceways and rollers to ensure even load distribution.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
02800484, 0927090, 1160037, 1314773, 153835, 15665236, 15665281, 18435, 2140285, 231340, 2800484, 3172563, 455387C1, 455387C91, 4723145, 566000, 597570C91, 62AX460...VIEW MORE
Additional Fitment Information:
| Vehicle | Transmission | Trans. Speed |
|---|---|---|
| 1995 - Dodge Ram 3500 | Manual | 5 |
- BD TorqLoc Ford 1990-2003 7.3L / Dodge 1994-2005 5.9L / Chevy 1992-2000 6.5LT
- BD TorqLoc Manual Converter Control Ford 1990-2003 7.3L / Dodge 1994-2005 5.9L / Chevy 1992-2000 6.5LT
- TorqLoc
- Product Attributes:
- Category: Shift & Pressure Controls
- Engine: 7.3l Powerstroke 99-03
- Suggested Product: 1030398
- Make: Ford
- Prop 65 (C, R or CR): Cr
-
Features:
- Maintains lock-up when the exhaust brake is activated
- Ensuring 100% of the retarding force is being transferred in 3rd and 4th gears
- Prevents slippage and subsequent high oil temperatures
- TorqLoc with its three position switch allows for manual command of the lock-up as well as AutoLoc and stock operations
- Exhaust brake usage can cause high temperatures in the automatic transmission due to torque converter slippage if a lockup device is not used. Only 10% to 80% of the retarding force is transferred through the fluid coupling of most torque converters. The BD TorqLoc commands the lock-up clutch of the torque converter to stay engaged when the BD Exhaust Brake is activated. This allows up to 100% of the retarding force to be transferred while in 3rd and 4th gear. Also, transmission oil temperatures will remain low because of little or no slippage occurring in the converter in these gears.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1995 - Dodge Ram 3500 | L | - | 6 Cyl 5.9L | 359 |
- Oil Seal
- with Chrysler 46RH Transmission
- National 331227H Oil Seal
- Product Attributes:
- Shaft (Inch): 1.875
- Sealing Material: Silicone
- Width (Inch): 0.375
- Flanged Outside Diameter (Inch): 2.868
- Inside Diameter:
- 1.875
- 47.630
- Flanged Outside Diameter (MM): 72.850
- Helix Type: Clockwise-spiral Lip Design
- Unit of Dimension: Inch
- Housing Bore (Inch): 2.624
- Outside Diameter (Inch): 2.628
- Shaft (MM): 47.630
- Part Description: Oil Seal
- National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
This Part Fits the Following OEM/Substitute Numbers:
052-3201, 15-09106, 15527598, 18508, 18592, 1942020, 211-2142, 211-6532, 240C15606C, 29399, 331227H, 3515137, 432802C91, 4531225, 46392, 57541R, 8122839, 8124869...VIEW MORE
Additional Fitment Information:
| Vehicle | Transmission | Position | Trans. Speed |
|---|---|---|---|
| 1995 - Dodge Ram 3500 | Automatic | Front | 4 |
- Oil Seal
- with Chrysler 47RH Transmission
- National 331227H Oil Seal
- Product Attributes:
- Shaft (Inch): 1.875
- Sealing Material: Silicone
- Width (Inch): 0.375
- Flanged Outside Diameter (Inch): 2.868
- Inside Diameter:
- 1.875
- 47.630
- Flanged Outside Diameter (MM): 72.850
- Helix Type: Clockwise-spiral Lip Design
- Unit of Dimension: Inch
- Housing Bore (Inch): 2.624
- Outside Diameter (Inch): 2.628
- Shaft (MM): 47.630
- Part Description: Oil Seal
- National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Additional Fitment Information:
| Vehicle | Transmission | Position | Trans. Speed |
|---|---|---|---|
| 1995 - Dodge Ram 3500 | Automatic | Front | 4 |
Showing 1 - 10 of 71 products
Loading...