1995 Honda Prelude Transmission Parts
Choose your Part Name for your 1995 Honda Prelude
Automatic Transmission Case Locator Pin
Automatic Transmission Control Shaft Seal
Automatic Transmission Oil Pump Seal
Automatic Transmission Output Shaft Seal
Automatic Transmission Shift Shaft Seal
Automatic Transmission Speed Sensor Seal
Automatic Transmission Torque Converter Housing Seal
Clutch Flywheel
Clutch Flywheel Bolt
Clutch Fork
Clutch Hydraulic Hose
Clutch Master Cylinder
Clutch Pedal Stop Pad
Clutch Release Arm
Clutch Release Bearing
Clutch Slave Cylinder
Manual Transmission Drive Axle Seal
Manual Transmission Input Shaft Seal
Manual Transmission Output Shaft Seal
Manual Transmission Shift Linkage Seal
Manual Transmission Shift Shaft Seal
Transmission Clutch Kit
Transmission Drain Plug
Image
Product
Price
- Ductile Casting; 220mm; 24T/26.0mm Spline Clamp Load: 1542 lbs.~Clutch Torque: 298 ft./lbs.~Torque At Flywheel: 238ft./lbs.~Torque Capacity At Wheels: 191 ft./lbs.
- Stage 1 Organic Clutch Kit; Ductile Casting; 220mm; 24T/26.0mm Spline;
- Stage 1 Organic Clutch Kit
-
Features:
- Clutch Cover Has Clamp Load 40 Perc. Above Genuine
- Organic Disc Has High Heat Resistant Properties
- Disc Has High Strength Copper Weave Fibers
- Disc Provides Superior Half-Engagement Feeling
- Ideal For Street/Circuit Or Drifting
- SFI Certified
- Drivability Is Similar To Stock Clutch
- Sprung Center Dampers To Reduce Drive Train Shock
- EXEDY Stage 1 Organic Racing Clutches only use premium friction materials that are resistant to slippage and burst. Increased clamp loads give the necessary capacity to handle modified engines. This is the ideal clutch for street and light horsepower track use. Drivability is similar to the stock clutch. Pedal efforts will be slightly higher because of the higher clamp loads. All of our Stage 1 clutch discs have spring center dampers to reduce drivetrain shock and provide smooth clutch engagement.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1995 - Honda Prelude | L | 2259 | 4 Cyl 2.3L | - |
- Ductile Casting; 220mm; 24T/26.0mm Spline Clamp Load: 1542 lbs.~Clutch Torque: 298 ft./lbs.~Torque At Flywheel: 238ft./lbs.~Torque Capacity At Wheels: 191 ft./lbs.
- Stage 1 Organic Clutch Kit; Ductile Casting; 220mm; 24T/26.0mm Spline;
- Stage 1 Organic Clutch Kit
-
Features:
- Clutch Cover Has Clamp Load 40 Perc. Above Genuine
- Organic Disc Has High Heat Resistant Properties
- Disc Has High Strength Copper Weave Fibers
- Disc Provides Superior Half-Engagement Feeling
- Ideal For Street/Circuit Or Drifting
- SFI Certified
- Drivability Is Similar To Stock Clutch
- Sprung Center Dampers To Reduce Drive Train Shock
- EXEDY Stage 1 Organic Racing Clutches only use premium friction materials that are resistant to slippage and burst. Increased clamp loads give the necessary capacity to handle modified engines. This is the ideal clutch for street and light horsepower track use. Drivability is similar to the stock clutch. Pedal efforts will be slightly higher because of the higher clamp loads. All of our Stage 1 clutch discs have spring center dampers to reduce drivetrain shock and provide smooth clutch engagement.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1995 - Honda Prelude | L | 2259 | 4 Cyl 2.3L | - |
- Oil Seal
- National 710315 Oil Seal
- Product Attributes:
- Shaft (Inch): 1.378
- Sealing Material: Nitrile
- Width (Inch): 0.315
- Overall Width with Side Lip (Inch): 0.492
- Overall Width with Side Lip (MM): 12.500
- Inside Diameter:
- 1.378
- 35.000
- Helix Type: Clockwise-spiral Lip Design
- Unit of Dimension: Metric
- Housing Bore (Inch): 2.205
- Outside Diameter:
- 2.213
- 56.200
- Outside Diameter (Inch): 2.213
- Shaft (MM): 35.000
- Part Description: Oil Seal
- National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
This Part Fits the Following OEM/Substitute Numbers:
052-3532, 052-3533, 12989, 14129, 19016558, 19016558B, 710315, 91205-611-003, 91205-611-005, 91205-639-005, 91205-PC5-005, 91205-PL3-A00, 91205-PL3-A01, 91205-PL3-A02, 91205-PX5-000, 91205-PX5-003, 91205-PX5-005, 91206-PL6-003...VIEW MORE
Additional Fitment Information:
| Vehicle | Transmission | Position | Trans. Speed | Transmission Manuf. Code |
|---|---|---|---|---|
| 1995 - Honda Prelude | Manual | Left | 5 | M2F4 |
- This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
- (40x56x9mm)
Additional Fitment Information:
| Vehicle | Transmission | Position |
|---|---|---|
| 1995 - Honda Prelude | Automatic | Left |
- This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
Additional Fitment Information:
| Vehicle | Position | Sub Model |
|---|---|---|
| 1995 - Honda Prelude | Left | Si |
- This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
- 35x56x8mm
Additional Fitment Information:
| Vehicle | Position | Sub Model |
|---|---|---|
| 1995 - Honda Prelude | Left | VTEC |
- This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
- 35x56x8mm
Additional Fitment Information:
| Vehicle | Position | Sub Model |
|---|---|---|
| 1995 - Honda Prelude | Left | VTEC |
- Pedal to switch plunger. Suitable for either the brake or clutch pedal.
Additional Fitment Information:
| Vehicle |
|---|
| 1995 - Honda Prelude |
- This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
- Input (44x68x8mm)
Additional Fitment Information:
| Vehicle | Sub Model |
|---|---|
| 1995 - Honda Prelude | Si |
- This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
- Mainshaft
- 44x68x8mm
Additional Fitment Information:
| Vehicle | Sub Model |
|---|---|
| 1995 - Honda Prelude | Si |
Showing 1 - 10 of 43 products
Loading...