2005 Mitsubishi Lancer Transmission Parts
Choose your Part Name for your 2005 Mitsubishi Lancer
Automatic Transmission Control Solenoid
Automatic Transmission Oil Pump Seal
Automatic Transmission Output Shaft Seal
Automatic Transmission Speed Sensor
Clutch Flywheel
Clutch Master Cylinder
Clutch Pilot Bushing
Clutch Release Bearing
Clutch Release Bearing and Slave Cylinder Assembly
Clutch Slave Cylinder
Manual Transmission Drive Axle Seal
Manual Transmission Mount
Manual Transmission Output Shaft Seal
Transmission Clutch Friction Plate
Transmission Clutch Kit
Transmission Clutch Pressure Plate
Image
Product
Price
- XACT Flywheel Streetlite
- XACT Flywheel Streetlite
- Product Attributes:
- California Proposition 65: Warning: This Product Can Expose You To Chemicals Including Carbon Black, Glass Wool Fibers, Or Silica (in Clutch Discs), Chromium And Nickel, Which Are Known To The State Of California To Cause Cancer Or Birth Defects Or Other Reproductive Harm. For More
- Friction Surface Diameter:
- 240
- 9.4
- Tooth Quantity: 114
- SFI: 1.1
- Mounting Hole Quantity: 7
- Product Weight (lbs.): 13.0
-
Features:
- Excellence in Performance", backed by the best one-year warranty in the industry!
- 600205 is a Streetlite flywheel, which is considerably lighter than stock and is the most durable flywheel offering from ACT. Materials are properly distributed for maximum strength, lower inertia, good heat tolerance and rigidity. ACT's Streetlite flywheels are preferred for street or drag racing. ACT flywheels are serviceable and can be resurfaced with no need to purchase additional parts.
This Part Fits the Following OEM/Substitute Numbers:
2-645-STU, 700920, FW-645-SF, MF04, SM08A
Additional Fitment Information:
| Vehicle | Block | CC | Transmission | Cylinder Head Type | Engine | Sub Model | CID |
|---|---|---|---|---|---|---|---|
| 2005 - Mitsubishi Lancer | L | 1997 | Manual | DOHC | 4 Cyl 2.0L | Evolution RS | 122 |
- Heavy Duty Pressure Plate
- Heavy Duty Pressure Plate
- Product Attributes:
- California Proposition 65: Warning: This Product Can Expose You To Chemicals Including Carbon Black, Glass Wool Fibers, Or Silica (in Clutch Discs), Chromium And Nickel, Which Are Known To The State Of California To Cause Cancer Or Birth Defects Or Other Reproductive Harm. For More
- Diameter:
- 240
- 9.4
- SFI: 1.1
- Product Weight (lbs.): 12.3
- Part Fitment Requirement: Includes Act Monoloc.
-
Features:
- Excellence in Performance", backed by the best one-year warranty in the industry!
- MB018 is an ACT pressure plate that uses exclusive diaphragm design to increase clamp load, reduce deflection and maximize clutch life. All diaphragms endure a four-stage, heat-treating process for unparalleled performance. ACT pressure plates have precision cover stampings to provide rigidity and consistency. ACT's Heavy Duty pressure plates increase clamp load by 20 to 50 percent. ACT's Heavy Duty pressure plates are recommended for use with a street or race disc. Monoloc is a one-piece, direct replacement or upgrade to the standard, two-piece wedge collar and wire ring featured in pull-type clutches. The spring tension of the segmented retaining ring is carefully calculated and tested for optimal performance. It provides uniform loading on the bearing and pressure plate to assure proper alignment, regardless of driver influence or vehicle modifications. Monoloc's hardened chrome-moly steel construction will provide years of service.
Additional Fitment Information:
| Vehicle | Block | CC | Transmission | Cylinder Head Type | Engine | Sub Model | CID |
|---|---|---|---|---|---|---|---|
| 2005 - Mitsubishi Lancer | L | 1997 | Manual | DOHC | 4 Cyl 2.0L | Evolution RS | 122 |
- Mod-Twin 225 HD Sprung Street
- Mod-Twin 225 HD Sprung Street
- Product Attributes:
- California Proposition 65: Warning: This Product Can Expose You To Chemicals Including Carbon Black, Glass Wool Fibers, Or Silica (in Clutch Discs), Chromium And Nickel, Which Are Known To The State Of California To Cause Cancer Or Birth Defects Or Other Reproductive Harm. For More
- Torque Capacity Over OE: 97%
- Torque Capacity (ft/lbs.): 700
- Alignment Tool Included: Yes
- Disc Material: Organic
- Pilot Bushing Included: Yes
- Input Shaft Diameter: 1
- Input Spline Quantity: 23
- Pressure Plate Type: Heavy Duty
- SFI: 1.2
- Release Bearing Included: Yes
- Product Weight (lbs.): 28.1
- Clutch Disc Diameter:
- 225
- 8.8
- Flywheel Included: Yes
-
Features:
- Excellence in Performance", backed by the best one-year warranty in the industry!
- T1S-M01 Mod-Twin 225 HD Sprung Street Kit is designed for high powered AWD street cars. It unites uncompromised pedal feel, durability, engagement quality with very high torque capacity by combining twice the organic friction surfaces with an ultra-durable spring center Mono-Drive hub in a completely modular design. Each diaphragm spring endures an exclusive four-stage heat treating process providing a consistent light pedal feel. Steel-backed Friction Plates with high quality organic friction materials deliver stable friction coefficient, good heat capacity and long clutch life. These Friction Plates uniformly transfer torque to the Mono-Drive sprung hub assembly which extends input shaft life and reduces driveline shock from torsional vibration. This kit includes a CNC-machined and dynamically balanced flywheel, pressure plate cover, diaphragm spring, face, puck-style ceramic friction plates, sprung Mono-Drive hub assembly, floater, patented Monoloc Collar, release bearing, alignment tool and pilot bearing (if needed). Mod-Twin clutches are fully rebuildable and most components can be ordered separately.
Additional Fitment Information:
| Vehicle | Block | CC | Transmission | Cylinder Head Type | Engine | Sub Model | CID |
|---|---|---|---|---|---|---|---|
| 2005 - Mitsubishi Lancer | L | 1997 | Manual | DOHC | 4 Cyl 2.0L | Evolution RS | 122 |
- Mod-Twin 225 XT Sprung Street
- Mod-Twin 225 XT Sprung Street
- Product Attributes:
- California Proposition 65: Warning: This Product Can Expose You To Chemicals Including Carbon Black, Glass Wool Fibers, Or Silica (in Clutch Discs), Chromium And Nickel, Which Are Known To The State Of California To Cause Cancer Or Birth Defects Or Other Reproductive Harm. For More
- Torque Capacity Over OE: 146%
- Torque Capacity (ft/lbs.): 875
- Alignment Tool Included: Yes
- Disc Material: Organic
- Pilot Bushing Included: Yes
- Input Shaft Diameter: 1
- Input Spline Quantity: 23
- Pressure Plate Type: Xtreme
- SFI: 1.2
- Release Bearing Included: Yes
- Product Weight (lbs.): 28.1
- Clutch Disc Diameter:
- 225
- 8.8
- Flywheel Included: Yes
-
Features:
- Excellence in Performance", backed by the best one-year warranty in the industry!
- T2S-M01 Mod-Twin 225 HD Sprung Street Kit is designed for high powered AWD street cars. It unites uncompromised pedal feel, durability, engagement quality with very high torque capacity by combining twice the organic friction surfaces with an ultra-durable spring center Mono-Drive hub in a completely modular design. Each diaphragm spring endures an exclusive four-stage heat treating process providing a consistent light pedal feel. Steel-backed Friction Plates with high quality organic friction materials deliver stable friction coefficient, good heat capacity and long clutch life. These Friction Plates uniformly transfer torque to the Mono-Drive sprung hub assembly which extends input shaft life and reduces driveline shock from torsional vibration. This kit includes a CNC-machined and dynamically balanced flywheel, pressure plate cover, diaphragm spring, face, puck-style ceramic friction plates, sprung Mono-Drive hub assembly, floater, patented Monoloc Collar, release bearing, alignment tool and pilot bearing (if needed). Mod-Twin clutches are fully rebuildable and most components can be ordered separately.
Additional Fitment Information:
| Vehicle | Block | CC | Transmission | Cylinder Head Type | Engine | Sub Model | CID |
|---|---|---|---|---|---|---|---|
| 2005 - Mitsubishi Lancer | L | 1997 | Manual | DOHC | 4 Cyl 2.0L | Evolution RS | 122 |
- HD-M/Perf Street Sprung
- HD-M/Perf Street Sprung
- Product Attributes:
- California Proposition 65: Warning: This Product Can Expose You To Chemicals Including Carbon Black, Glass Wool Fibers, Or Silica (in Clutch Discs), Chromium And Nickel, Which Are Known To The State Of California To Cause Cancer Or Birth Defects Or Other Reproductive Harm. For More
- Torque Capacity Over OE: 45%
- Torque Capacity (ft/lbs.): 530
- Alignment Tool Included: Yes
- Disc Material: Organic
- Input Shaft Diameter: 1
- Part Fitment Requirement:
- Includes Act Monoloc.
- Includes Monoloc.
- Input Spline Quantity: 23
- Pressure Plate Type: Heavy Duty
- Release Bearing Included: Yes
- Product Weight (lbs.): 17.3
- Clutch Disc Diameter:
- 240
- 9.4
-
Features:
- Excellence in Performance", backed by the best one-year warranty in the industry!
- ME2-HDSS kit features ACT's most popular Heavy Duty pressure plate and most popular street disc. ACT Heavy Duty pressure plates use exclusive diaphragm design to increase clamp load, reduce deflection and maximize clutch life. All diaphragms endure a four-stage, heat-treating process for unparalleled performance. ACT pressure plates have precision cover stampings to provide rigidity and consistency. ACT's Performance street discs are the most popular disc purchased. They feature premium organic materials with high copper content for better heat transfer and steel-backed lining for greater burst strength and durability. These discs feature a reduced marcel for faster shift action to complement ACT pressure plates. Quiet operation with increased strength and reliability. Monoloc is a one-piece, direct replacement or upgrade to the standard, two-piece wedge collar and wire ring featured in pull-type clutches. The spring tension of the segmented retaining ring is carefully calculated and tested for optimal performance. It provides uniform loading on the bearing and pressure plate to assure proper alignment, regardless of driver influence or vehicle modifications. Monoloc's hardened chrome-moly steel construction will provide years of service.
This Part Fits the Following OEM/Substitute Numbers:
05803HD, 5152-2100, 760871, DF188801, FX100 05106-HD00, SM702
Additional Fitment Information:
| Vehicle | Block | CC | Transmission | Cylinder Head Type | Engine | Sub Model | CID |
|---|---|---|---|---|---|---|---|
| 2005 - Mitsubishi Lancer | L | 1997 | Manual | DOHC | 4 Cyl 2.0L | Evolution RS | 122 |
- For use with crimp type center hub assemblies.
- Monoloc Collar
- Monoloc Collar
- Product Attributes:
- California Proposition 65: Warning: This Product Can Expose You To Chemicals Including Carbon Black, Glass Wool Fibers, Or Silica (in Clutch Discs), Chromium And Nickel, Which Are Known To The State Of California To Cause Cancer Or Birth Defects Or Other Reproductive Harm. For More
- Product Weight (lbs.): 0.1
-
Features:
- Excellence in Performance", backed by the best one-year warranty in the industry!
- 884006P is a one-piece, direct replacement or upgrade to the standard, two-piece wedge collar and wire ring featured in pull-type clutches. The spring tension of the segmented retaining ring is carefully calculated and tested for optimal performance. It provides uniform loading on the bearing and pressure plate to assure proper alignment, regardless of driver influence or vehicle modifications. Monoloc's hardened chrome-moly steel construction will provide years of service.
Additional Fitment Information:
| Vehicle | Block | CC | Cylinder Head Type | Region | Engine | Sub Model | Aspiration | CID |
|---|---|---|---|---|---|---|---|---|
| 2005 - Mitsubishi Lancer | L | 1997 | DOHC | United States | 4 Cyl 2.0L | Evolution RS | Turbocharged | 122 |
- Mod-Twin 225 XT Sprung Street
- Mod-Twin 225 XT Sprung Street
- Product Attributes:
- California Proposition 65: Warning: This Product Can Expose You To Chemicals Including Carbon Black, Glass Wool Fibers, Or Silica (in Clutch Discs), Chromium And Nickel, Which Are Known To The State Of California To Cause Cancer Or Birth Defects Or Other Reproductive Harm. For More
- Torque Capacity Over OE: 146%
- Torque Capacity (ft/lbs.): 875
- Alignment Tool Included: Yes
- Disc Material: Organic
- Pilot Bushing Included: Yes
- Input Shaft Diameter: 1
- Input Spline Quantity: 23
- Pressure Plate Type: Xtreme
- SFI: 1.2
- Release Bearing Included: Yes
- Product Weight (lbs.): 28.1
- Clutch Disc Diameter:
- 225
- 8.8
- Flywheel Included: Yes
-
Features:
- Excellence in Performance", backed by the best one-year warranty in the industry!
- T2S-M01 Mod-Twin 225 HD Sprung Street Kit is designed for high powered AWD street cars. It unites uncompromised pedal feel, durability, engagement quality with very high torque capacity by combining twice the organic friction surfaces with an ultra-durable spring center Mono-Drive hub in a completely modular design. Each diaphragm spring endures an exclusive four-stage heat treating process providing a consistent light pedal feel. Steel-backed Friction Plates with high quality organic friction materials deliver stable friction coefficient, good heat capacity and long clutch life. These Friction Plates uniformly transfer torque to the Mono-Drive sprung hub assembly which extends input shaft life and reduces driveline shock from torsional vibration. This kit includes a CNC-machined and dynamically balanced flywheel, pressure plate cover, diaphragm spring, face, puck-style ceramic friction plates, sprung Mono-Drive hub assembly, floater, patented Monoloc Collar, release bearing, alignment tool and pilot bearing (if needed). Mod-Twin clutches are fully rebuildable and most components can be ordered separately.
Additional Fitment Information:
| Vehicle | Block | CC | Transmission | Cylinder Head Type | Engine | Sub Model | CID |
|---|---|---|---|---|---|---|---|
| 2005 - Mitsubishi Lancer | L | 1997 | Manual | DOHC | 4 Cyl 2.0L | Evolution RS | 122 |
- Heavy Duty Pressure Plate
- Heavy Duty Pressure Plate
- Product Attributes:
- California Proposition 65: Warning: This Product Can Expose You To Chemicals Including Carbon Black, Glass Wool Fibers, Or Silica (in Clutch Discs), Chromium And Nickel, Which Are Known To The State Of California To Cause Cancer Or Birth Defects Or Other Reproductive Harm. For More
- Diameter:
- 240
- 9.4
- SFI: 1.1
- Product Weight (lbs.): 12.3
- Part Fitment Requirement:
- Includes Act Monoloc.
- Includes Monoloc.
-
Features:
- Excellence in Performance", backed by the best one-year warranty in the industry!
- MB018 is an ACT pressure plate that uses exclusive diaphragm design to increase clamp load, reduce deflection and maximize clutch life. All diaphragms endure a four-stage, heat-treating process for unparalleled performance. ACT pressure plates have precision cover stampings to provide rigidity and consistency. ACT's Heavy Duty pressure plates increase clamp load by 20 to 50 percent. ACT's Heavy Duty pressure plates are recommended for use with a street or race disc. Monoloc is a one-piece, direct replacement or upgrade to the standard, two-piece wedge collar and wire ring featured in pull-type clutches. The spring tension of the segmented retaining ring is carefully calculated and tested for optimal performance. It provides uniform loading on the bearing and pressure plate to assure proper alignment, regardless of driver influence or vehicle modifications. Monoloc's hardened chrome-moly steel construction will provide years of service.
Additional Fitment Information:
| Vehicle | Block | CC | Transmission | Cylinder Head Type | Engine | Sub Model | CID |
|---|---|---|---|---|---|---|---|
| 2005 - Mitsubishi Lancer | L | 1997 | Manual | DOHC | 4 Cyl 2.0L | Evolution RS | 122 |
- Mod-Twin 225 HD Sprung Street
- Mod-Twin 225 HD Sprung Street
- Product Attributes:
- California Proposition 65: Warning: This Product Can Expose You To Chemicals Including Carbon Black, Glass Wool Fibers, Or Silica (in Clutch Discs), Chromium And Nickel, Which Are Known To The State Of California To Cause Cancer Or Birth Defects Or Other Reproductive Harm. For More
- Torque Capacity Over OE: 97%
- Torque Capacity (ft/lbs.): 700
- Alignment Tool Included: Yes
- Disc Material: Organic
- Pilot Bushing Included: Yes
- Input Shaft Diameter: 1
- Input Spline Quantity: 23
- Pressure Plate Type: Heavy Duty
- SFI: 1.2
- Release Bearing Included: Yes
- Product Weight (lbs.): 28.1
- Clutch Disc Diameter:
- 225
- 8.8
- Flywheel Included: Yes
-
Features:
- Excellence in Performance", backed by the best one-year warranty in the industry!
- T1S-M01 Mod-Twin 225 HD Sprung Street Kit is designed for high powered AWD street cars. It unites uncompromised pedal feel, durability, engagement quality with very high torque capacity by combining twice the organic friction surfaces with an ultra-durable spring center Mono-Drive hub in a completely modular design. Each diaphragm spring endures an exclusive four-stage heat treating process providing a consistent light pedal feel. Steel-backed Friction Plates with high quality organic friction materials deliver stable friction coefficient, good heat capacity and long clutch life. These Friction Plates uniformly transfer torque to the Mono-Drive sprung hub assembly which extends input shaft life and reduces driveline shock from torsional vibration. This kit includes a CNC-machined and dynamically balanced flywheel, pressure plate cover, diaphragm spring, face, puck-style ceramic friction plates, sprung Mono-Drive hub assembly, floater, patented Monoloc Collar, release bearing, alignment tool and pilot bearing (if needed). Mod-Twin clutches are fully rebuildable and most components can be ordered separately.
Additional Fitment Information:
| Vehicle | Block | CC | Transmission | Cylinder Head Type | Engine | Sub Model | CID |
|---|---|---|---|---|---|---|---|
| 2005 - Mitsubishi Lancer | L | 1997 | Manual | DOHC | 4 Cyl 2.0L | Evolution RS | 122 |
- For use with crimp type center hub assemblies.
- Monoloc Collar
- Monoloc Collar
- Product Attributes:
- California Proposition 65: Warning: This Product Can Expose You To Chemicals Including Carbon Black, Glass Wool Fibers, Or Silica (in Clutch Discs), Chromium And Nickel, Which Are Known To The State Of California To Cause Cancer Or Birth Defects Or Other Reproductive Harm. For More
- Product Weight (lbs.): 0.1
-
Features:
- Excellence in Performance", backed by the best one-year warranty in the industry!
- 884006P is a one-piece, direct replacement or upgrade to the standard, two-piece wedge collar and wire ring featured in pull-type clutches. The spring tension of the segmented retaining ring is carefully calculated and tested for optimal performance. It provides uniform loading on the bearing and pressure plate to assure proper alignment, regardless of driver influence or vehicle modifications. Monoloc's hardened chrome-moly steel construction will provide years of service.
Additional Fitment Information:
| Vehicle | Block | CC | Cylinder Head Type | Region | Engine | Sub Model | Aspiration | CID |
|---|---|---|---|---|---|---|---|---|
| 2005 - Mitsubishi Lancer | L | 1997 | DOHC | United States | 4 Cyl 2.0L | Evolution RS | Turbocharged | 122 |
Showing 1 - 10 of 47 products
Loading...