2006 Chevrolet Corvette Transmission Parts


Showing 1 - 10 of 21 products
Image
SKU
Product
Rating
Price

Ram
  • steel flywheel
  • OEM 11.75; 11 in. Diaphragm
  • Steel flywheel GM LSX/98-02/OEM 11 Diaphragm
  • Steel Flywheel
  • Features:
    • Dynamically Balanced Within 1/2 oz./in. Of Factory Specifications
    • Surface Ground For Optimum Disc Mating Surface
    • Strictly Factory Warranty Only
  • The flywheel accepts one half of the load of the clutch system. To realize the potential of the clutch system, the flywheel must be flat, parallel to the crankshaft flange, properly surface ground for maximum friction compatibility with the clutch disc, and balanced. Dyno testing proves that flywheel balance is critical to achieving maximum engine service. Every RAM flywheel is dynamically balanced to within ? ounce/inch of the factory specification. RAM aluminum flywheels have a .250 inch thick steel friction insert to handle the heat generated under extreme conditions, while allowing resurfacing without the need to replace the insert. All RAM flywheels are manufactured from SFI certified materials in our South Carolina facility.

Additional Fitment Information:
Vehicle Block CC Engine Sub Model CID
2006 - Chevrolet Corvette V 5967 8 Cyl 6.0L Base 364

Ram
  • pilot bushing/bearing
  • 0.642 in. ID; 1.093 in. OD; 0.715 in. Length
  • Pilot bushing/bearing GM
  • Product Attributes:
    • Inside Diameter: 0.642 In.
  • Features:
    • Pilot Bushing/Bearing
    • Strictly Factory Warranty Only
  • Premium replacement pilot bearings and bushings complete your clutch install for a long, trouble free life of operation.

Additional Fitment Information:
Vehicle Block CC Engine Sub Model CID
2006 - Chevrolet Corvette V 5967 8 Cyl 6.0L Base 364

Mcleod
  • Fitting:Double Male:Straight:AN-4 To Wire-Clip:Each
  • Fitting:Double Male:Straight:AN-4 To Wire-Clip:Each
  • Product Attributes:
    • Fitting Side B: Wire-clip
    • Fitting Side A: An-4 Male
    • Material: Steel
  • Features:
    • Mcleod Racing offers an asortment of connections and fittings to get your hydraulic linkage done right the first time.
  • McLeod Racing offers a variety of adapter fittings to ease in transmission installation. These adapters allow the use of factory disconnect fittings when performing a transmission swap.

Additional Fitment Information:
Vehicle Block CC Transmission Engine Sub Model CID
2006 - Chevrolet Corvette V 7011 Manual 8 Cyl 7.0L Z06 427

Centerforce
  • Dual Friction(R); Clutch and Flywheel Kit
  • 12 in. Dia.; 14 Bolt Pattern; 26 Spline; 1 1/8 in. Input Shaft; 700 ft/lbs Torque; 168 Teeth; Includes Pressure Plate/Clutch Disc/Flywheel
  • The Centerforce Dual Friction(R) Clutch Series uses patented technologies for an ultimate pressure plate and disc combination.
  • Centerforce® Dual Friction Clutch Kit
  • Product Attributes:
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: Warnings: This Product Can Expose You To Chemicals Including Nickel Compounds And Dusts Which Are Known To The State Of California To Cause Cancer. For More Information Visit Www.p65warnings.ca.gov. Wash Hands Following Installation.
  • Features:
    • Patented Centrifugal Weight Design [where Applicable]
    • Patented Dual Friction[r] Design
    • Patented Ball Bearing Pressure Plate [where Applicable]
    • Light Pedal Effort
    • High Quality Friction Material
    • Increased Holding Capacity
    • Smooth Engagement
  • The Centerforce(R) Dual Friction(R) Clutch Series is a performance matched pressure plate & disc combination featuring the patented Centerforce centrifugal weight system (where applicable) and specialized machining processes to provide a performance clutch that offers exceptional street characteristics, while offering outstanding holding-capacity and durability. Furthermore, the Centerforce Dual Friction disc has an organic full facing on one side for longevity and an organic segmented facing on the other side providing increased holding capacity. Some applications have the organic segmented facings of both sides. The Dual Friction clutch is engineered for those who are looking for the ultimate in street/strip holding power and performance without sacrificing pedal effort and driver control. While the Dual Friction has been engineered primarily as a street clutch it can be used in mild competition applications.

Additional Fitment Information:
Vehicle
2006 - Chevrolet Corvette

Centerforce
  • DYAD(R) DS 10.4; Clutch and Flywheel Kit
  • 10.4 in. Dia.; 26 Spline; 1 1/8 in. Input Shaft; 1300 ft/lbs Trq.; 168 Teeth; Includes Pressure Plate/Discs/Flywheel
  • The Centerforce(R) DYAD(R) DS (Drive System) 10.4 Inch patented multi-disc clutch offers smooth engagement; light pedal; and high-end holding capacity for engine torque levels from 500 to 1300 ft/lbs.
  • DYAD Clutch and Flywheel Kit
  • Product Attributes:
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: Warnings: This Product Can Expose You To Chemicals Including Nickel Compounds And Dusts Which Are Known To The State Of California To Cause Cancer. For More Information Visit Www.p65warnings.ca.gov. Wash Hands Following Installation.
  • Features:
    • No Complicated Setup Or Adjustments Required
    • Fully Dampened Clutch Developed For Vehicles W/extreme Power
    • Patented Ball Bearing Pressure Plate
    • Patented Multi-disc Floating Disc And Drive Disc Design
    • Quiet
    • Positive Drive Floater
    • Smooth Engagement And Light Pedal Effort
    • Holds 500 To 1300 Ft/lbs Of Torque
    • Precision Balanced
    • Greater Longevity
    • Arp Fasteners
    • Excellent Driver Control
    • Comes Preassembled For Your Convenience
  • The Centerforce(R) DYAD DS 10.4" twin disc clutch has been developed for vehicles requiring a holding capacity of 500 to 1300 ft/lbs of torque at the crank. The pressure plate features our patented centrifugal weight system for superior clamp load over stock and our patented ball bearing actuated pressure plate providing light pedal effort. The discs are equipped with organic segmented facings providing increased holding capacity and the sprung/dampened drive disc provides smooth drivability. DYAD DS clutches are equipped with a lightened billet steel flywheel providing low inertia resulting in quicker RPM's. Components are designed, machined and assembled in the USA. DYAD DS clutches are match balanced and ready for installation using the included ARP fasteners.

Additional Fitment Information:
Vehicle Block CC Engine Sub Model CID
2006 - Chevrolet Corvette V 7011 8 Cyl 7.0L Z06 427

Dorman
  • Transmission Oil Pan
  • Product Attributes:
    • Capacity:
      • 2.7
      • 4.3
      • 4.6
      • 4.8
      • 5.3
      • 6.2
    • Grade Type: Regular
    • Mounting Hardware Included:
      • No
      • Non
    • Maximum Depth: 82.5
    • Mounting Hole Diameter:
      • 5
      • 7.5
    • Configuration:
      • One Piece
      • Una Pieza
    • Gasket Configuration:
      • One Piece
      • Una Pieza
    • Mounting Hole Quantity: 20
    • Dipstick Port:
      • No
      • Non
    • Gasket Or Seal Included:
      • Oui
      • Yes
    • Minimum Depth: 39
    • Maximum Width: 295
    • Color:
      • Gray
      • Gris
    • Contenidos del paquete:
      • 1 Cárter De Transmisión
      • 1 Filtro
      • 1 Imán
      • 1 Tapón De Drenaje
      • Junta
      • Tapa
    • Drain Plug Included:
      • Oui
      • Yes
    • Material:
      • Acero
      • Goma
      • Plastic
      • Plástico
      • Polyester
      • Rubber
      • Steel
  • Features:
    • Service-friendly - this transmission fluid pan for specified GM vehicles features an integrated drain plug to allow the trans fluid to be drained before servicing the pan, eliminating messy spills
    • Durable design - built to strict specifications and thoroughly tested to withstand impacts and leaks for a long and reliable service life
    • Thoroughly tested - vehicle try-on testing and salt-spay analysis ensure fit and performance
    • Trustworthy quality - backed by a team of product experts in the United States and more than a century of automotive experience
  • On certain GM vehicles, when a transmission pan is leaking or in need of routine service, loosening and lowering that fluid-filled pan is a messy business. This Dorman OE FIX transmission oil pan is designed to match the fit and function of the original equipment pan but is manufactured with a handy drain plug to allow the transmission fluid to be removed before service.

This Part Fits the Following OEM/Substitute Numbers:
24222657, 24224781, 24236933, 29535617

Additional Fitment Information:
Vehicle Transmission Trans. Speed Transmission Manuf. Code
2006 - Chevrolet Corvette Automatic 6 6L80

Dorman
  • Clutch Slave Cylinder
  • Product Attributes:
    • Contenidos del paquete: Cilindro Hidráulico Del Embrague
    • Material:
      • Aluminio
      • Aluminum
  • Features:
    • Direct replacement - this clutch slave cylinder is built to match the original clutch slave in specific vehicles
    • Precise design - reverse-engineered from original equipment to fit seamlessly and function reliably
    • Durable materials - includes high-grade rubber components for compatibility with standard brake fluid
    • Trustworthy value - backed by team of engineers and quality control experts in the United States
  • Clutch slave cylinder leaking or malfunctioning? This direct replacement is precision-engineered to match the original equipment design in specific vehicle years, makes and models for a reliable replacement.

This Part Fits the Following OEM/Substitute Numbers:
12574157, 138.62023, 24237634, 900095, CS2529, LSC449, S0449, S0466

Additional Fitment Information:
Vehicle
2006 - Chevrolet Corvette

Mcleod
  • Clutch Pressure Plate Bolt Kit: 10mm x 1.50 x 25mm: LS,Ford Modular: Set of 6
  • Clutch Pressure Plate Bolt Kit: 10mm x 1.50 x 25mm: LS,Ford Modular: Set of 6
  • Product Attributes:
    • Nuts Included: No
    • Fastener Head: 6 Point Hex
    • Fastener Style: Bolt
    • Quantity:
      • Box Of 6
      • Sold As A Set Of 6.
    • Application: Gm;ford;dodge
    • Fastener Color: Black
    • Fastener Head Style: Hex Head
    • Washers Included: No
    • Fastener Material:
      • Chrome Moly
      • Steel
    • Underhead Length (mm): 25mm
    • Fastener Finish: Black Oxide
  • Features:
    • All McLeod Racing hardware is quality Grade 8 Hardware that is to made proprietary to McLeod Racings specs. We also are proud to use ARP the world wide leader in performance hardware in some parts numbers.
  • McLeod pressure plate bolts fasten your pressure plate to your flywheel for durable bolt-on performance. The bolts come in various thread sizes and styles to ensure a correct fit for your specific vehicle application. They are manufactured from premium-grade steel and sport a black oxide finish to resist corrosion. When it comes to bolt-on performance, make McLeod your parts connection and get the most out of your ride.

Additional Fitment Information:
Vehicle Block CC Transmission Engine Sub Model CID
2006 - Chevrolet Corvette V 7011 Manual 8 Cyl 7.0L Z06 427

Advanced Clutch
  • ACT Twin Disc Heavy Duty Street Clutch Kit
  • Twin Disc HD Street Kit
  • Twin Disc HD Street Kit with Streetlite Flywheel
  • Product Attributes:
    • Torque Capacity Over OE: 86%
    • Torque Capacity (ft/lbs.): 891
    • Grade Type: Performance
    • Pilot Bearing Included: No
    • Alignment Tool Included: Yes
    • Pilot Bushing Included: No
    • Input Shaft Diameter: 1.125
    • Disc Type Sprung Solid: Solid
    • Flywheel Bolts Included: No
    • Part Fitment Requirement: Includes Act Streetlite Flywheel.
    • Prop 65 Long Label: Warning: This Product Can Expose You To Chemicals Including Carbon Black, Glass Wool Fibers, Or Silica (in Clutch Discs), Chromium And Nickel, Which Are Known To The State Of California To Cause Cancer Or Birth Defects Or Other Reproductive Harm. For More
    • Input Spline Quantity: 26
    • Pressure Plate Bolts Included: No
    • Grease Included: Yes
    • Clutch Slave Cylinder Included: No
    • SFI: 1.2
    • Release Bearing Included: No
    • Clutch Master Cylinder Included: No
    • Product Weight (lbs.): 45.8
    • Clutch Disc Diameter:
      • 10.5
      • 267
    • Flywheel Included: Yes
  • Features:
    • Excellence in Performance", backed by the best one-year warranty in the industry!
  • T1S-G05 street, twin disc kit offers twice the number of disc surfaces for better wear, heat capacity and long life compared to single disc kits. These kits use a proprietary Positive Lift Floater System design, which results in quiet operation with no floater rattle and no posts to wear. ACT twin disc kits endure an exclusive four-stage, heat-treating process on all diaphragms. The ACT twin disc kits features the ability to adjust for disc wear and provides equal disengagement for discs. The Performance street rigid-hub discs feature premium organic materials with high copper content for better heat transfer and steel-backed lining for greater burst strength and durability. The chrome-moly hub is heat-treated for strength and durability. Rivet design and materials are carefully selected for maximum strength. All ACT twin disc kits include a CNC-machined and dynamically balanced flywheel to ensure trouble-free installation and operation. ACT twin disc kits include a pressure plate, two discs, a floater, flywheel and alignment tool. Some kits may include a pilot bearing and release bearing.

Additional Fitment Information:
Vehicle Block CC Region Engine Sub Model CID
2006 - Chevrolet Corvette V 7011 United States 8 Cyl 7.0L Z06 427

Advanced Clutch
  • ACT Twin Disc Heavy Duty Street Clutch Kit
  • Includes Streetlite flywheel.
  • Twin Disc HD Street Kit
  • Twin Disc HD Street Kit
  • Product Attributes:
    • Torque Capacity Over OE: 86%
    • Torque Capacity (ft/lbs.): 891
    • Grade Type: Performance
    • Pilot Bearing Included: No
    • Alignment Tool Included: Yes
    • Pilot Bushing Included: No
    • Input Shaft Diameter: 1.125
    • Disc Type Sprung Solid: Solid
    • Flywheel Bolts Included: No
    • Part Fitment Requirement:
      • Includes Act Streetlite Flywheel.
      • Includes Streetlite Flywheel.
    • Prop 65 Long Label: Warning: This Product Can Expose You To Chemicals Including Carbon Black, Glass Wool Fibers, Or Silica (in Clutch Discs), Chromium And Nickel, Which Are Known To The State Of California To Cause Cancer Or Birth Defects Or Other Reproductive Harm. For More
    • Input Spline Quantity: 26
    • Pressure Plate Bolts Included: No
    • Grease Included: Yes
    • Clutch Slave Cylinder Included: No
    • SFI: 1.2
    • Release Bearing Included: No
    • Clutch Master Cylinder Included: No
    • Product Weight (lbs.): 45.8
    • Clutch Disc Diameter:
      • 10.5
      • 267
    • Flywheel Included: Yes
  • Features:
    • Excellence in Performance", backed by the best one-year warranty in the industry!
  • T1S-G05 street, twin disc kit offers twice the number of disc surfaces for better wear, heat capacity and long life compared to single disc kits. These kits use a proprietary Positive Lift Floater System design, which results in quiet operation with no floater rattle and no posts to wear. ACT twin disc kits endure an exclusive four-stage, heat-treating process on all diaphragms. The ACT twin disc kits features the ability to adjust for disc wear and provides equal disengagement for discs. The Performance street rigid-hub discs feature premium organic materials with high copper content for better heat transfer and steel-backed lining for greater burst strength and durability. The chrome-moly hub is heat-treated for strength and durability. Rivet design and materials are carefully selected for maximum strength. All ACT twin disc kits include a CNC-machined and dynamically balanced flywheel to ensure trouble-free installation and operation. ACT twin disc kits include a pressure plate, two discs, a floater, flywheel and alignment tool. Some kits may include a pilot bearing and release bearing.

Additional Fitment Information:
Vehicle Block CC Region Engine Sub Model CID
2006 - Chevrolet Corvette V 7011 United States 8 Cyl 7.0L Z06 427
Showing 1 - 10 of 21 products

Loading...