1993 Dodge W250 Catalytic Converter Parts
Choose your Engine for your 1993 Dodge W250
Image
Product
Price
- Universal Catalytic Converter - 3in.
- CARB Executive Order D-193-105; Certification Level : PRE-OBDII OE Spec Cutting and Welding Required During Installation
- Universal Catalytic Converter - 3in.
- 3in. Universal California Pre-OBDII Catalytic Converter
- Product Attributes:
- Inlet Orientation: Straight
- Inlet Diameter: 3
- Body Width: 6.375
- Body Type: Clam Shell
- Heat Shield Material: Aluminized Steel
- Body Height: 3.75
- Subtitle: California / Carb Compliant
- Inlet Attachment: Weld-on
- Outlet Orientation: Straight
- Outlet Attachment: Weld-on
- Sensor Port Count: 0
- Substrate: Ceramic
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Engine VIN | CID |
|---|---|---|---|---|---|
| 1993 - Dodge W250 | V | - | 8 Cyl 5.9L | Z | 360 |
- Standard Grade Universal Catalytic Converter - 3.00in.
- Cutting and Welding Required
- Magnaflow Standard Grade Universal Catalytic Converter - 3.00in.
- Universal Standard Grade Federal (Not legal for sale or use in CA, CO and NY)
- Product Attributes:
- Inlet Orientation: Straight
- Air Tube Count: 0
- Tube Material: Stainless Steel
- Outlet Gasket Included: No
- Outlet Mounting Hardware Included: No
- Body Width: 5.5
- Body Height: 3.75
- Inlet Mounting Hardware Included: No
- Body Material: Stainless Steel
- Clamps Included: No
- Outlet Quantity: 1
- Inlet Type: Weld-on
- Air Tube Adaptable: No
- California Air Resources Board (CARB) Certified: No
- Inlet Gasket Included: No
- Heat Shield Attached: Yes
- Hangers Included: No
- CARB Executive Order Number: Not Applicable
- Overall Length: 13
- Body Type: Clam-shell
- Heat Shield Material: Aluminized Steel
- Inlet Inside Diameter: 3
- Substrate Material: Ceramic
- Outlet Orientation: Straight
- Inlet Quantity: 1
- Body Shape: Oval
- Outlet Inside Diameter: 3
- Sensor Port Count: 0
- Outlet Type: Weld-on
-
Features:
- Expertly formulated catalyst blend maximizes efficiency, ensuring optimal emissions control to keep your check engine light off
- Compact, lightweight construction enables installation in confined areas, welding is required
- Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
- High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
- Durable 308 stainless steel MIG welds
- MagnaFlow Standard Grade Federal/EPA Compliant Universal Catalytic Converter 94109 helps keep the check engine light off. Get the right fit for a wide array of vehicles thanks to the adaptable Universal design (cutting and welding is required). With highly corrosion resistant, stainless steel construction, you can have confidence in the quality of this catalytic converter. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for pre-OBDII Federally registered vehicles.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1993 - Dodge W250 | V | 5211 | 8 Cyl 5.2L | 318 |
- Universal Catalytic Converter - 2.00in.
- To 9,000lbs. Gross Vehicle Weight Cutting and Welding Required During Installation
- Universal Catalytic Converter - 2.00in.
- Universal Standard Grade Federal (Excludes CA)
- Product Attributes:
- Inlet Attachment: Weld-on
- Inlet Orientation: Straight
- Outlet Orientation: Straight
- Outlet Attachment: Weld-on
- Sensor Port Count: 0
- Body Width: 6.375
- Body Type: Clam Shell
- Heat Shield Material: Aluminized Steel
- Body Height: 3.75
- Subtitle: Federal / Epa Compliant
- Substrate Material: Ceramic
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | Engine VIN | CID |
|---|---|---|---|---|---|---|
| 1993 - Dodge W250 | V | - | Right | 8 Cyl 5.9L | 5 | 360 |
- OEM Grade Universal Catalytic Converter - 3.00in.
- Standard Series; 3 in. Tubing/Inlet/Outlet; Overall L-16.00 in.; Not Air Tube Kit Adaptable;Not Legal For Sale Or Use On Vehicles Registered In California
- Magnaflow OEM Grade Universal Catalytic Converter - 3.00in.
- 94200 Series OBDII Compliant Universal Catalytic Converter
- Product Attributes:
- Inlet Orientation: Straight
- Air Tube Count: 0
- Tube Material: Stainless Steel
- Outlet Gasket Included: No
- WARNING CA Proposition 65: No
- Outlet Mounting Hardware Included: No
- Body Width:
- 6.375
- 6.375 In.
- Outlet Attachment Type: Weld-on
- Body Height:
- 3.75
- 3.750 In.
- Inlet Mounting Hardware Included: No
- Recommended Use: Converter
- Body Material: Stainless Steel
- Clamps Included: No
- Outlet Quantity: 1
- Heat Shield Included: Yes
- Inlet Type: Weld-on
- Air Tube Adaptable: No
- California Air Resources Board (CARB): No
- Catalytic Converter Format: Pre-catalytic Converter And Main Catalytic Converter
- California Air Resources Board (CARB) Certified: No
- Inlet Gasket Included: No
- Oxygen Sensor Location: None
- Hangers Included: No
- Heat Shield Attached: Yes
- CARB Executive Order Number: Not Applicable
- Overall Length: 16
- Subtitles: Federal / Epa Compliant
- Body Type:
- Clam Shell
- Clam-shell
- Heat Shield Material: Aluminized Steel
- Inlet Inside Diameter: 3
- Substrate Material: Ceramic
- Converter Body Size: Oem
- Outlet Orientation: Straight
- Catalytic Converter Air Tube Adapter: Not Air Tube Kit Adaptable
- Inlet Quantity: 1
- Body Shape: Oval
- Core Substrate Material: Ceramic
- Outlet Inside Diameter: 3
- Sensor Port Count: 0
- Emission: Non-california (49-state)
- Inlet Attachment Type: Weld-on
- Outlet Type: Weld-on
-
Features:
- Expertly formulated catalyst blend maximizes efficiency, ensuring optimal emissions control to keep your check engine light off
- Compact, lightweight construction enables installation in confined areas, welding is required
- Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
- High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
- Durable 308 stainless steel MIG welds
- MagnaFlow OEM Grade Federal/EPA Compliant Universal Catalytic Converter 94209 helps keep the check engine light off. Get the right fit for a wide array of vehicles thanks to the adaptable Universal design (cutting and welding is required). With highly corrosion resistant, stainless steel construction, you can have confidence in the quality of this catalytic converter. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with California or Federal/EPA Emission systems.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 1993 - Dodge W250 | V | - | Front | 8 Cyl 5.9L | 360 |
- OEM Grade Universal Catalytic Converter - 3.00in.
- Standard Series; 3 in. Tubing/Inlet/Outlet; Overall L-16.00 in.; Not Air Tube Kit Adaptable;Not Legal For Sale Or Use On Vehicles Registered In California
- Magnaflow OEM Grade Universal Catalytic Converter - 3.00in.
- 94200 Series OBDII Compliant Universal Catalytic Converter
- Product Attributes:
- Inlet Orientation: Straight
- Air Tube Count: 0
- Tube Material: Stainless Steel
- Outlet Gasket Included: No
- WARNING CA Proposition 65: No
- Outlet Mounting Hardware Included: No
- Body Width:
- 6.375
- 6.375 In.
- Outlet Attachment Type: Weld-on
- Body Height:
- 3.75
- 3.750 In.
- Inlet Mounting Hardware Included: No
- Recommended Use: Converter
- Body Material: Stainless Steel
- Clamps Included: No
- Outlet Quantity: 1
- Heat Shield Included: Yes
- Inlet Type: Weld-on
- Air Tube Adaptable: No
- California Air Resources Board (CARB): No
- Catalytic Converter Format: Pre-catalytic Converter And Main Catalytic Converter
- California Air Resources Board (CARB) Certified: No
- Inlet Gasket Included: No
- Oxygen Sensor Location: None
- Hangers Included: No
- Heat Shield Attached: Yes
- CARB Executive Order Number: Not Applicable
- Overall Length: 16
- Subtitles: Federal / Epa Compliant
- Body Type:
- Clam Shell
- Clam-shell
- Heat Shield Material: Aluminized Steel
- Inlet Inside Diameter: 3
- Substrate Material: Ceramic
- Converter Body Size: Oem
- Outlet Orientation: Straight
- Catalytic Converter Air Tube Adapter: Not Air Tube Kit Adaptable
- Inlet Quantity: 1
- Body Shape: Oval
- Core Substrate Material: Ceramic
- Outlet Inside Diameter: 3
- Sensor Port Count: 0
- Emission: Non-california (49-state)
- Inlet Attachment Type: Weld-on
- Outlet Type: Weld-on
-
Features:
- Expertly formulated catalyst blend maximizes efficiency, ensuring optimal emissions control to keep your check engine light off
- Compact, lightweight construction enables installation in confined areas, welding is required
- Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
- High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
- Durable 308 stainless steel MIG welds
- MagnaFlow OEM Grade Federal/EPA Compliant Universal Catalytic Converter 94209 helps keep the check engine light off. Get the right fit for a wide array of vehicles thanks to the adaptable Universal design (cutting and welding is required). With highly corrosion resistant, stainless steel construction, you can have confidence in the quality of this catalytic converter. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with California or Federal/EPA Emission systems.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | Engine VIN | CID |
|---|---|---|---|---|---|---|
| 1993 - Dodge W250 | V | - | Front | 8 Cyl 5.9L | Z | 360 |
- Universal Catalytic Converter - 2.00in.
- To 9,000lbs. Gross Vehicle Weight Cutting and Welding Required During Installation
- Universal Catalytic Converter - 2.00in.
- Universal Standard Grade Federal (Excludes CA)
- Product Attributes:
- Inlet Attachment: Weld-on
- Inlet Orientation: Straight
- Outlet Orientation: Straight
- Outlet Attachment: Weld-on
- Sensor Port Count: 0
- Body Width: 6.375
- Body Type: Clam Shell
- Heat Shield Material: Aluminized Steel
- Body Height: 3.75
- Subtitle: Federal / Epa Compliant
- Substrate Material: Ceramic
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | Engine VIN | CID |
|---|---|---|---|---|---|---|
| 1993 - Dodge W250 | V | - | Left | 8 Cyl 5.9L | 5 | 360 |
- Universal Catalytic Converter - 3.00in.
- Cutting and Welding Required During Installation
- Universal Catalytic Converter - 3.00in.
- Universal Standard Grade Federal (Excludes CA)
- Product Attributes:
- Inlet Orientation: Straight
- Inlet Diameter: 3
- Body Width: 6.375
- Body Type: Clam Shell
- Heat Shield Material: Aluminized Steel
- Body Height: 3.75
- Subtitle: Federal / Epa Compliant
- Substrate Material: Ceramic
- Inlet Attachment: Weld-on
- Outlet Orientation: Straight
- Outlet Attachment: Weld-on
- Sensor Port Count: 0
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Engine VIN | CID |
|---|---|---|---|---|---|
| 1993 - Dodge W250 | V | - | 8 Cyl 5.9L | Z | 360 |
Showing 1 - 7 of 7 products
Loading...