1999 Ford E 250 Econoline Catalytic Converter Parts
Choose your Engine for your 1999 Ford E-250 Econoline
Image
Product
Price
- Universal Catalytic Converter - 2.50in.
- CARB Executive Order D-193-103 Engine Family Number XFMXA04.2JGC ; Certification Level : LEV1 LEV OE Spec Cutting and Welding Required During Installation
- Universal Catalytic Converter - 2.50in.
- 2.50in. Universal California OBDII Catalytic Converter
- Product Attributes:
- Inlet Attachment: Weld-on
- Inlet Orientation: Straight
- Outlet Orientation: Straight
- Inlet Diameter: 2.5
- Outlet Attachment: Weld-on
- Body Width: 5.5
- Body Type: Clam Shell
- Heat Shield Material: Aluminized Steel
- Body Height: 3.75
- Subtitle: California / Carb Compliant
- Substrate Material: Ceramic
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 1999 - Ford E-250 Econoline | V | - | Rear Left | 6 Cyl 4.2L | 256 |
- Universal Catalytic Converter - 2.50in.
- CARB Executive Order D-193-103 Engine Family Number XFMXA04.2JGC ; Certification Level : LEV1 LEV OE Spec Cutting and Welding Required During Installation
- Universal Catalytic Converter - 2.50in.
- 2.50in. Universal California OBDII Catalytic Converter
- Product Attributes:
- Inlet Attachment: Weld-on
- Inlet Orientation: Angled
- Outlet Orientation: Straight
- Inlet Diameter: 2.5
- Outlet Attachment: Weld-on
- Sensor Port Count: 0
- Body Width: 5.25
- Body Type: Clam Shell
- Body Height: 3.5
- Subtitle: California / Carb Compliant
- Substrate Material: Ceramic
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 1999 - Ford E-250 Econoline | V | - | Front Left | 6 Cyl 4.2L | 256 |
- Universal Catalytic Converter - 2.50in.
- CARB Executive Order D-193-103 Engine Family Number XFMXA04.2JGC ; Certification Level : LEV1 LEV OE Spec Cutting and Welding Required During Installation
- Universal Catalytic Converter - 2.50in.
- 2.50in. Universal California OBDII Catalytic Converter
- Product Attributes:
- Inlet Attachment: Weld-on
- Inlet Orientation: Angled
- Outlet Orientation: Straight
- Inlet Diameter: 2.5
- Outlet Attachment: Weld-on
- Sensor Port Count: 0
- Body Width: 5.25
- Body Type: Clam Shell
- Body Height: 3.5
- Subtitle: California / Carb Compliant
- Substrate Material: Ceramic
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 1999 - Ford E-250 Econoline | V | - | Front Right | 6 Cyl 4.2L | 256 |
- Universal Catalytic Converter - 3.00in.
- CARB Executive Order D-193-100 Engine Family Number XFMXA05.4JBN ; Certification Level : TIER1 OE Spec Cutting and Welding Required During Installation
- Universal Catalytic Converter - 3.00in.
- 3in. Universal California OBDII Catalytic Converter
- Product Attributes:
- Inlet Attachment: Weld-on
- Main Piping Diameter: 3
- Exhaust Component Mount Type: Uses New Hangers (not Included)
- Inlet Diameter: 3
- Outlet Attachment: Weld-on
- Body Width: 7.75
- Subtitle: California / Carb Compliant
- Substrate Material: Ceramic
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1999 - Ford E-250 Econoline | V | - | 8 Cyl 5.4L | 330 |
- Universal Catalytic Converter - 2.50in.
- CARB Executive Order D-193-103 Engine Family Number XFMXA04.2JGC ; Certification Level : LEV1 LEV OE Spec Cutting and Welding Required During Installation
- Universal Catalytic Converter - 2.50in.
- 2.50in. Universal California OBDII Catalytic Converter
- Product Attributes:
- Inlet Attachment: Weld-on
- Inlet Orientation: Straight
- Outlet Orientation: Straight
- Inlet Diameter: 2.5
- Outlet Attachment: Weld-on
- Body Width: 5.5
- Body Type: Clam Shell
- Heat Shield Material: Aluminized Steel
- Body Height: 3.75
- Subtitle: California / Carb Compliant
- Substrate Material: Ceramic
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 1999 - Ford E-250 Econoline | V | - | Rear Right | 6 Cyl 4.2L | 256 |
- Universal Catalytic Converter - 2.25in.
- Cutting and Welding Required During Installation
- Universal Catalytic Converter - 2.25in.
- Universal HM Grade Federal (Excludes CA)
- Product Attributes:
- Inlet Orientation: Straight
- Inlet Diameter: 2.25
- Body Width: 5.5
- Body Type: Clam Shell
- Heat Shield Material: Aluminized Steel
- Body Height: 3.75
- Subtitle: Federal / Epa Compliant
- Substrate Material: Ceramic
- Inlet Attachment: Weld-on
- Outlet Orientation: Straight
- Outlet Attachment: Weld-on
- Sensor Port Count: 0
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 1999 - Ford E-250 Econoline | V | - | Left | 6 Cyl 4.2L | 256 |
- Universal Catalytic Converter - 2.25in.
- Cutting and Welding Required During Installation
- Universal Catalytic Converter - 2.25in.
- Universal HM Grade Federal (Excludes CA)
- Product Attributes:
- Inlet Orientation: Straight
- Inlet Diameter: 2.25
- Body Width: 5.5
- Body Type: Clam Shell
- Heat Shield Material: Aluminized Steel
- Body Height: 3.75
- Subtitle: Federal / Epa Compliant
- Substrate Material: Ceramic
- Inlet Attachment: Weld-on
- Outlet Orientation: Straight
- Outlet Attachment: Weld-on
- Sensor Port Count: 0
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 1999 - Ford E-250 Econoline | V | - | Right | 6 Cyl 4.2L | 256 |
- Universal Catalytic Converter - 3.00in.
- To 8,500lbs. Gross Vehicle Weight Cutting and Welding Required During Installation
- Universal Catalytic Converter - 3.00in.
- Universal HM Grade Federal (Excludes CA)
- Product Attributes:
- Inlet Orientation: Straight
- Inlet Diameter: 3
- Body Width: 5.5
- Body Type: Clam Shell
- Heat Shield Material: Aluminized Steel
- Body Height: 3.75
- Subtitle: Federal / Epa Compliant
- Substrate Material: Ceramic
- Inlet Attachment: Weld-on
- Outlet Orientation: Straight
- Outlet Attachment: Weld-on
- Sensor Port Count: 0
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1999 - Ford E-250 Econoline | V | - | 8 Cyl 5.4L | 330 |
- HM Grade Direct-Fit Catalytic Converter
- Under 8500 (lb) Gross Vehicle Weight (GVW)
- Magnaflow HM Grade Direct-Fit Catalytic Converter
- Direct-Fit HM Grade Federal (Not legal for sale or use in CA, CO and NY)
- Product Attributes:
- Air Tube Count: 0
- Inlet Gasket Included: Yes
- Tube Material: Stainless Steel
- Oxygen Sensor Location: Post Converter
- Outlet Gasket Included: No
- Grade Type: Regular
- Hangers Included: No
- Heat Shield Attached: No
- Outlet Mounting Hardware Included: No
- CARB Executive Order Number: Not Applicable
- Overall Length: 37.625
- Body Type: Spun
- Inlet Mounting Hardware Included: No
- Body Material: Stainless Steel
- Substrate Material: Ceramic
- Clamps Included: No
- Sensor Port Count: 2
- Inlet Type: Bolt-on
- Air Tube Adaptable: No
- California Air Resources Board (CARB) Certified: No
- Outlet Type: Clamp-on
-
Features:
- Simplifies installation with essential gaskets and hardware being included in the box
- Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
- Mandrel bent tubing retains OEM-like design and geometry, ensuring smooth exhaust flow for peak fuel economy and engine operation
- High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
- Durable 308 stainless steel MIG welds
- Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency
- Keep the check engine light off with MagnaFlow HM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 55321. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow's state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. Designed to fit the 1997-2002 Ford E-250 Econoline, 2000-2004 Ford E-350 Super Duty, and more, this direct-fit catalytic converter also interchanges with OE parts 1C2Z-5E212-California and 2C2Z-5E212-FA, among others. The included gaskets & hardware reduce the possibility of a leaking seal while avoiding the need to reuse corroded factory parts for installation. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with Federal/EPA Emission systems.
This Part Fits the Following OEM/Substitute Numbers:
1C2Z-5E212-CA, 2C2Z-5E212-DA, 2C2Z-5E212-EA, 2C2Z-5E212-FA, 2C2Z-5E212-HA, 3C2Z-5E212-DA, 3C2Z-5E212-EA, 3C2Z-5E212-FA, 4C2Z-5E212-FA, 4C2Z-5E212-GA, 4C2Z-5E212-MA, 4C2Z-5E212-MB, 4C2Z-5E212-MC, 4C2Z-5F250-EA, 4C2Z-5F250-EB, 4C2Z-5F250-EC, 5C2Z-5F250-EA, F7UZ-5E212-KC...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Fuel Type | Engine | CID |
|---|---|---|---|---|---|
| 1999 - Ford E-250 Econoline | V | - | BI-FUEL | 8 Cyl 5.4L | 330 |
- HM Grade Universal Catalytic Converter - 3.00in.
- Over 8500 (lb) Gross Vehicle Weight (GVW) without Oxygen Sensor Cutting and Welding Required
- Magnaflow HM Grade Universal Catalytic Converter - 3.00in.
- Universal HM Grade Federal (Not legal for sale or use in CA, CO and NY)
- Product Attributes:
- Inlet Orientation: Straight
- Air Tube Count: 0
- Tube Material: Stainless Steel
- Outlet Gasket Included: No
- Outlet Mounting Hardware Included: No
- Body Width: 7.625
- Body Height: 7.75
- Inlet Mounting Hardware Included: No
- Body Material: Stainless Steel
- Clamps Included: No
- Outlet Quantity: 1
- Inlet Type: Weld-on
- Air Tube Adaptable: No
- California Air Resources Board (CARB) Certified: No
- Inlet Gasket Included: No
- Oxygen Sensor Location: Post Converter
- Heat Shield Attached: Yes
- Hangers Included: No
- CARB Executive Order Number: Not Applicable
- Overall Length: 28.5
- Body Type: Clam-shell
- Heat Shield Material: Aluminized Steel
- Inlet Inside Diameter: 3
- Substrate Material: Ceramic
- Outlet Orientation: Straight
- Inlet Quantity: 1
- Body Shape: Round
- Outlet Inside Diameter: 3
- Sensor Port Count: 1
- Outlet Type: Weld-on
-
Features:
- Expertly formulated catalyst blend maximizes efficiency, ensuring optimal emissions control to keep your check engine light off
- Compact, lightweight construction enables installation in confined areas, welding is required
- Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
- High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
- Durable 308 stainless steel MIG welds
- MagnaFlow HM Grade Federal/EPA Compliant Universal Catalytic Converter 55400 helps keep the check engine light off. Get the right fit for a wide array of vehicles thanks to the adaptable Universal design (cutting and welding is required). With highly corrosion resistant, stainless steel construction, you can have confidence in the quality of this catalytic converter. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with Federal/EPA Emission systems.
This Part Fits the Following OEM/Substitute Numbers:
F4TZ 5E212-A
Additional Fitment Information:
| Vehicle | Block | CC | Fuel Type | Engine | CID |
|---|---|---|---|---|---|
| 1999 - Ford E-250 Econoline | V | - | GAS | 8 Cyl 5.4L | 330 |
Showing 1 - 10 of 26 products
Loading...