1999 Ford F 250 Super Duty Catalytic Converter Parts
Choose your Engine for your 1999 Ford F-250 Super Duty
Image
Product
Price
- Universal Catalytic Converter - 3.00in.
- CARB Executive Order D-193-100 Engine Family Number XFMXA06.8JBC ; Certification Level : TIER1 OE Spec Cutting and Welding Required During Installation
- Universal Catalytic Converter - 3.00in.
- 3in. Universal California OBDII Catalytic Converter
- Product Attributes:
- Inlet Attachment: Weld-on
- Main Piping Diameter: 3
- Exhaust Component Mount Type: Uses New Hangers (not Included)
- Inlet Diameter: 3
- Outlet Attachment: Weld-on
- Body Width: 7.75
- Subtitle: California / Carb Compliant
- Substrate Material: Ceramic
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1999 - Ford F-250 Super Duty | V | - | 10 Cyl 6.8L | 415 |
- Universal Catalytic Converter - 3.00in.
- CARB Executive Order D-193-100 Engine Family Number XFMXA05.4JBN ; Certification Level : TIER1 OE Spec Cutting and Welding Required During Installation
- Universal Catalytic Converter - 3.00in.
- 3in. Universal California OBDII Catalytic Converter
- Product Attributes:
- Inlet Attachment: Weld-on
- Main Piping Diameter: 3
- Exhaust Component Mount Type: Uses New Hangers (not Included)
- Inlet Diameter: 3
- Outlet Attachment: Weld-on
- Body Width: 7.75
- Subtitle: California / Carb Compliant
- Substrate Material: Ceramic
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1999 - Ford F-250 Super Duty | V | - | 8 Cyl 5.4L | 330 |
- Universal Catalytic Converter - 2.25in.
- Cutting and Welding Required During Installation
- Universal Catalytic Converter - 2.25in.
- Universal HM Grade Federal (Excludes CA)
- Product Attributes:
- Inlet Orientation: Straight
- Inlet Diameter: 2.25
- Body Width: 5.5
- Body Type: Clam Shell
- Heat Shield Material: Aluminized Steel
- Body Height: 3.75
- Subtitle: Federal / Epa Compliant
- Substrate Material: Ceramic
- Inlet Attachment: Weld-on
- Outlet Orientation: Straight
- Outlet Attachment: Weld-on
- Sensor Port Count: 0
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 1999 - Ford F-250 Super Duty | V | - | Rear Right | 8 Cyl 5.4L | 330 |
- Universal Catalytic Converter - 2.25in.
- Cutting and Welding Required During Installation
- Universal Catalytic Converter - 2.25in.
- Universal HM Grade Federal (Excludes CA)
- Product Attributes:
- Inlet Orientation: Straight
- Inlet Diameter: 2.25
- Body Width: 5.5
- Body Type: Clam Shell
- Heat Shield Material: Aluminized Steel
- Body Height: 3.75
- Subtitle: Federal / Epa Compliant
- Substrate Material: Ceramic
- Inlet Attachment: Weld-on
- Outlet Orientation: Straight
- Outlet Attachment: Weld-on
- Sensor Port Count: 0
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 1999 - Ford F-250 Super Duty | V | - | Rear Left | 8 Cyl 5.4L | 330 |
- Universal Catalytic Converter - 2.25in.
- To 15,000lbs. Gross Vehicle Weight Cutting and Welding Required During Installation
- Universal Catalytic Converter - 2.25in.
- Universal HM Grade Federal (Excludes CA)
- Product Attributes:
- Inlet Orientation: Straight
- Inlet Diameter: 2.25
- Body Width: 5.5
- Body Type: Clam Shell
- Heat Shield Material: Aluminized Steel
- Body Height: 3.75
- Subtitle: Federal / Epa Compliant
- Substrate Material: Ceramic
- Inlet Attachment: Weld-on
- Outlet Orientation: Straight
- Outlet Attachment: Weld-on
- Sensor Port Count: 0
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1999 - Ford F-250 Super Duty | V | - | 8 Cyl 5.4L | 330 |
- Universal Catalytic Converter - 3.00in.
- To 15,000lbs. Gross Vehicle Weight Cutting and Welding Required During Installation
- Universal Catalytic Converter - 3.00in.
- Universal HM Grade Federal (Excludes CA)
- Product Attributes:
- Inlet Orientation: Straight
- Inlet Diameter: 3
- Body Width: 6.5
- Body Type: Clam Shell
- Heat Shield Material: Aluminized Steel
- Body Height: 3.75
- Subtitle: Federal / Epa Compliant
- Substrate Material: Ceramic
- Inlet Attachment: Weld-on
- Outlet Orientation: Straight
- Outlet Attachment: Weld-on
- Sensor Port Count: 0
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1999 - Ford F-250 Super Duty | V | - | 10 Cyl 6.8L | 415 |
- HM Grade Universal Catalytic Converter - 5.00in.
- Cutting and Welding Required Spun Body Legal for sale and use in the state of Colorado per regulation number 20, effective 12/15/2023
- Magnaflow HM Grade Universal Catalytic Converter - 5.00in.
- Universal HM Grade Federal (Not legal for sale or use in CA, CO and NY)
- Product Attributes:
- Inlet Orientation: Straight
- Air Tube Count: 0
- Tube Material: Stainless Steel
- Outlet Gasket Included: No
- Outlet Mounting Hardware Included: No
- Body Width: 6
- Body Height: 6
- Inlet Mounting Hardware Included: No
- Body Material: Stainless Steel
- Clamps Included: No
- Outlet Quantity: 1
- Inlet Type: Weld-on
- Air Tube Adaptable: No
- California Air Resources Board (CARB) Certified: No
- Inlet Gasket Included: No
- Heat Shield Attached: No
- Hangers Included: No
- CARB Executive Order Number: Not Applicable
- Overall Length: 12
- Body Type: Spun
- Inlet Inside Diameter: 5
- Substrate Material: Metallic
- Outlet Orientation: Straight
- Inlet Quantity: 1
- Body Shape: Round
- Outlet Inside Diameter: 2.25
- Sensor Port Count: 0
- Outlet Type: Weld-on
-
Features:
- Expertly formulated catalyst blend maximizes efficiency, ensuring optimal emissions control to keep your check engine light off
- Compact, lightweight construction enables installation in confined areas, welding is required
- Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
- High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
- Durable 308 stainless steel MIG welds
- Keep the check engine light off with MagnaFlow HM Grade Federal/EPA Compliant Universal Catalytic Converter 60112. The Universal design allows the part to fit a wide array of vehicles (cutting and welding required), and the stainless steel construction of this spun body catalytic converter is highly resistant to corrosion. The single laser fusion weld of the spun body greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with Federal/EPA Emission systems.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1999 - Ford F-250 Super Duty | V | - | 8 Cyl 7.3L | 445 |
- Universal Catalytic Converter - 5.00in.
- Not Permitted for Use in the State of Colorado Cutting and Welding Required During Installation 5in.
- Universal Catalytic Converter - 5.00in.
- Universal HM Grade Federal (Excludes CA)
- Product Attributes:
- Inlet Attachment: Weld-on
- Inlet Orientation: Straight
- Outlet Orientation: Straight
- Inlet Diameter: 5
- Outlet Attachment: Weld-on
- Sensor Port Count: 0
- Body Width: 6
- Body Type: Spun
- Body Height: 6
- Subtitle: Federal / Epa Compliant
- Substrate Material: Metallic
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1999 - Ford F-250 Super Duty | V | - | 8 Cyl 7.3L | 445 |
- HM Grade Universal Catalytic Converter - 4.00in.
- Universal Replacement Cutting and Welding Required Legal for sale and use in the state of Colorado per regulation number 20, effective 12/15/2023
- Magnaflow HM Grade Universal Catalytic Converter - 4.00in.
- Universal HM Grade Federal (Not legal for sale or use in CA, CO and NY)
- Product Attributes:
- Inlet Orientation: Straight
- Air Tube Count: 0
- Tube Material: Stainless Steel
- Outlet Gasket Included: No
- Outlet Mounting Hardware Included: No
- Body Width: 6
- Body Height: 6
- Inlet Mounting Hardware Included: No
- Body Material: Stainless Steel
- Clamps Included: No
- Outlet Quantity: 1
- Inlet Type: Weld-on
- Air Tube Adaptable: No
- California Air Resources Board (CARB) Certified: No
- Inlet Gasket Included: No
- Heat Shield Attached: No
- Hangers Included: No
- CARB Executive Order Number: Not Applicable
- Overall Length: 12
- Body Type: Spun
- Inlet Inside Diameter: 4
- Substrate Material: Metallic
- Outlet Orientation: Straight
- Inlet Quantity: 1
- Body Shape: Round
- Outlet Inside Diameter: 4
- Sensor Port Count: 0
- Outlet Type: Weld-on
-
Features:
- Expertly formulated catalyst blend maximizes efficiency, ensuring optimal emissions control to keep your check engine light off
- Compact, lightweight construction enables installation in confined areas, welding is required
- Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
- High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
- Durable 308 stainless steel MIG welds
- Keep the check engine light off with MagnaFlow HM Grade Federal/EPA Compliant Universal Catalytic Converter 60111. The Universal design allows the part to fit a wide array of vehicles (cutting and welding required), and the stainless steel construction of this spun body catalytic converter is highly resistant to corrosion. The single laser fusion weld of the spun body greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with Federal/EPA Emission systems.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1999 - Ford F-250 Super Duty | V | - | 8 Cyl 7.3L | 445 |
- Universal Catalytic Converter - 4.00in.
- Not Permitted for Use in the State of Colorado Cutting and Welding Required During Installation 4in.
- Universal Catalytic Converter - 4.00in.
- Universal HM Grade Federal (Excludes CA)
- Product Attributes:
- Inlet Attachment: Weld-on
- Inlet Orientation: Straight
- Outlet Orientation: Straight
- Inlet Diameter: 4
- Outlet Attachment: Weld-on
- Sensor Port Count: 0
- Body Width: 6
- Body Type: Spun
- Body Height: 6
- Subtitle: Federal / Epa Compliant
- Substrate Material: Metallic
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1999 - Ford F-250 Super Duty | V | - | 8 Cyl 7.3L | 445 |
Showing 1 - 10 of 11 products
Loading...