2005 GMC Sierra 2500 HD Catalytic Converter Parts
Choose your Engine for your 2005 GMC Sierra 2500 HD
Image
Product
Price
- Universal Catalytic Converter - 3.00in.
- without Pre-Converter Cutting and Welding Required During Installation
- Universal Catalytic Converter - 3.00in.
- Universal OEM GRADE Federal (Excludes California)
- Product Attributes:
- Inlet Orientation: Straight
- Inlet Diameter: 3
- Body Width: 4.25
- Body Type: Clam Shell
- Heat Shield Material: Aluminized Steel
- Body Height: 4.375
- Subtitle: Federal / Epa Compliant
- Substrate Material: Ceramic
- Inlet Attachment: Weld-on
- Outlet Orientation: Straight
- Outlet Attachment: Weld-on
- Sensor Port Count: 0
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | Wheel FeedBase | CID |
|---|---|---|---|---|---|---|
| 2005 - GMC Sierra 2500 HD | V | 5967 | Left | 8 Cyl 6.0L | 133.0 | 364 |
- Universal Catalytic Converter - 3.00in.
- Cutting and Welding Required During Installation
- Universal Catalytic Converter - 3.00in.
- Universal OEM GRADE Federal (Excludes California)
- Product Attributes:
- Inlet Orientation: Straight
- Inlet Diameter: 3
- Body Width: 4.25
- Body Type: Clam Shell
- Heat Shield Material: Aluminized Steel
- Body Height: 4.375
- Subtitle: Federal / Epa Compliant
- Substrate Material: Ceramic
- Inlet Attachment: Weld-on
- Outlet Orientation: Straight
- Outlet Attachment: Weld-on
- Sensor Port Count: 0
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | Wheel FeedBase | CID |
|---|---|---|---|---|---|---|
| 2005 - GMC Sierra 2500 HD | V | 5967 | Rear | 8 Cyl 6.0L | 133.0 | 364 |
- Universal Catalytic Converter - 3.00in.
- CARB Executive Order D-193-103 Engine Family Number 5GMXT06.0188 ; Certification Level : LEV1 LEV OE Spec Cutting and Welding Required During Installation
- Universal Catalytic Converter - 3.00in.
- 3in. Universal California OBDII Catalytic Converter
- Product Attributes:
- Inlet Orientation: Straight
- Inlet Diameter: 3
- Body Width: 5.5
- Body Type: Clam Shell
- Heat Shield Material: Aluminized Steel
- Body Height: 3.75
- Subtitle: California / Carb Compliant
- Substrate Material: Ceramic
- Inlet Attachment: Weld-on
- Outlet Orientation: Straight
- Outlet Attachment: Weld-on
- Sensor Port Count: 0
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 2005 - GMC Sierra 2500 HD | V | 5967 | Rear Right | 8 Cyl 6.0L | 364 |
- Universal Catalytic Converter - 3.00in.
- CARB Executive Order D-193-103 Engine Family Number 5GMXT06.0188 ; Certification Level : LEV1 LEV OE Spec Cutting and Welding Required During Installation
- Universal Catalytic Converter - 3.00in.
- 3in. Universal California OBDII Catalytic Converter
- Product Attributes:
- Inlet Orientation: Straight
- Inlet Diameter: 3
- Body Width: 5.5
- Body Type: Clam Shell
- Heat Shield Material: Aluminized Steel
- Body Height: 3.75
- Subtitle: California / Carb Compliant
- Substrate Material: Ceramic
- Inlet Attachment: Weld-on
- Outlet Orientation: Straight
- Outlet Attachment: Weld-on
- Sensor Port Count: 0
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 2005 - GMC Sierra 2500 HD | V | 5967 | Rear Left | 8 Cyl 6.0L | 364 |
- Universal Catalytic Converter - 3.00in.
- CARB Executive Order D-193-103 Engine Family Number 5GMXT08.1201 ; Certification Level : LEV1 LEV OE Spec Cutting and Welding Required During Installation
- Universal Catalytic Converter - 3.00in.
- 3in. Universal California OBDII Catalytic Converter
- Product Attributes:
- Inlet Orientation: Straight
- Inlet Diameter: 3
- Body Width: 5.5
- Body Type: Clam Shell
- Heat Shield Material: Aluminized Steel
- Body Height: 3.75
- Subtitle: California / Carb Compliant
- Substrate Material: Ceramic
- Inlet Attachment: Weld-on
- Outlet Orientation: Straight
- Outlet Attachment: Weld-on
- Sensor Port Count: 0
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 2005 - GMC Sierra 2500 HD | V | - | Rear | 8 Cyl 8.1L | 496 |
- Direct-Fit Catalytic Converter
- without Pre-Converter
- Direct-Fit Catalytic Converter
- Direct-Fit HM Grade Federal (Excludes CA)
- Product Attributes:
- Inlet Attachment: Bolt-on
- Subtitle: Federal / Epa Compliant
- Substrate Material: Ceramic
This Part Fits the Following OEM/Substitute Numbers:
15013584, 15070427, 15070466, 15077751, 15199818, 15755166, 15793200
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | Wheel FeedBase | CID |
|---|---|---|---|---|---|---|
| 2005 - GMC Sierra 2500 HD | V | 5967 | Left | 8 Cyl 6.0L | 133.0 | 364 |
- Direct-Fit Catalytic Converter
- 3in. Outlet
- Direct-Fit Catalytic Converter
- Direct-Fit HM Grade Federal (Excludes CA)
- Product Attributes:
- Inlet Attachment: Bolt-on
- Main Piping Diameter: 3
- Subtitle: Federal / Epa Compliant
- Substrate Material: Ceramic
This Part Fits the Following OEM/Substitute Numbers:
10398370, 15092796, 15798954, 15798958, 88983208, 89060649
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | Wheel FeedBase | CID |
|---|---|---|---|---|---|---|
| 2005 - GMC Sierra 2500 HD | V | 5967 | Right | 8 Cyl 6.0L | 133.0 | 364 |
- HM Grade Direct-Fit Catalytic Converter
- with 3 (in) Diameter Outlet
- Magnaflow HM Grade Direct-Fit Catalytic Converter
- Direct-Fit HM Grade Federal (Not legal for sale or use in CA, CO and NY)
- Product Attributes:
- Air Tube Count: 0
- Inlet Gasket Included: Yes
- Tube Material: Stainless Steel
- Oxygen Sensor Location: Post Converter
- Outlet Gasket Included: No
- Grade Type: Regular
- Hangers Included: No
- Heat Shield Attached: No
- Outlet Mounting Hardware Included: No
- CARB Executive Order Number: Not Applicable
- Overall Length: 32.625
- Body Type: Spun
- Inlet Mounting Hardware Included: No
- Body Material: Stainless Steel
- Substrate Material: Ceramic
- Clamps Included: No
- Sensor Port Count: 1
- Inlet Type: Bolt-on
- Air Tube Adaptable: No
- California Air Resources Board (CARB) Certified: No
- Outlet Type: Clamp-on
-
Features:
- Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency
- Simplifies installation with essential gaskets and hardware being included in the box
- Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
- Mandrel bent tubing retains OEM-like design and geometry, ensuring smooth exhaust flow for peak fuel economy and engine operation
- High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
- Durable 308 stainless steel MIG welds
- Keep the check engine light off with MagnaFlow HM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 93479. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow's state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This direct-fit catalytic converter is designed to fit the 2001-2006 Chevrolet Silverado 2500 HD, 2001-2006 GMC Sierra 2500 HD, and additional vehicles. Avoid potential exhaust leaks by using the included gaskets to get a proper seal. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with Federal/EPA Emission systems.
This Part Fits the Following OEM/Substitute Numbers:
10398370, 15092796, 15798954, 15798958, 88983208, 89060649
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | Wheel FeedBase | CID |
|---|---|---|---|---|---|---|
| 2005 - GMC Sierra 2500 HD | V | 5967 | Right | 8 Cyl 6.0L | 133.0 | 364 |
- HM Grade Direct-Fit Catalytic Converter
- without Pre-Converter
- Magnaflow HM Grade Direct-Fit Catalytic Converter
- Direct-Fit HM Grade Federal (Not legal for sale or use in CA, CO and NY)
- Product Attributes:
- Air Tube Count: 0
- Inlet Gasket Included: Yes
- Tube Material: Stainless Steel
- Oxygen Sensor Location: Pre And Post Converter
- Outlet Gasket Included: No
- Grade Type: Regular
- Hangers Included: No
- Heat Shield Attached: No
- Outlet Mounting Hardware Included: No
- CARB Executive Order Number: Not Applicable
- Overall Length: 56.5
- Body Type: Spun
- Inlet Mounting Hardware Included: No
- Body Material: Stainless Steel
- Substrate Material: Ceramic
- Clamps Included: Yes
- Sensor Port Count: 2
- Inlet Type: Bolt-on
- Air Tube Adaptable: No
- California Air Resources Board (CARB) Certified: No
- Outlet Type: Clamp-on
-
Features:
- Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency
- Simplifies installation with essential gaskets and hardware being included in the box
- Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
- Mandrel bent tubing retains OEM-like design and geometry, ensuring smooth exhaust flow for peak fuel economy and engine operation
- Torca AccuSeal® Exhaust Clamps provide a full 360-degree equally distributed clamping force preventing pipe distortion while creating a complete seal and maintaining serviceability
- OE-sized barbed exhaust hangers made from corrosion-resistant 410 stainless steel, designed to reduce noise and vibration
- High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
- Durable 308 stainless steel MIG welds
- Keep the check engine light off with MagnaFlow HM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 93480. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow's state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This direct-fit catalytic converter is designed to fit the 2001-2006 Chevrolet Silverado 2500 HD, 2001-2006 GMC Sierra 2500 HD, and additional vehicles. The included gaskets & hardware reduce the possibility of a leaking seal while avoiding the need to reuse corroded factory parts for installation. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with Federal/EPA Emission systems.
This Part Fits the Following OEM/Substitute Numbers:
15013584, 15070427, 15070466, 15077751, 15199818, 15755166, 15793200
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | Wheel FeedBase | CID |
|---|---|---|---|---|---|---|
| 2005 - GMC Sierra 2500 HD | V | 5967 | Left | 8 Cyl 6.0L | 133.0 | 364 |
Showing 1 - 9 of 9 products
Loading...