Image
Product
Price
- EVOLUTION COATED ROTOR
- EVOLUTION GENUINE GEOMET FULLY COATED ROTORS
- Evolution Genuine Geomet® Coated Brake Rotor
- Product Attributes:
- Overall Height:
- 2.390 In.
- 60.60mm
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: This Product Can Expose You To Chemicals Including Arsenic; Chromium (hexavalent Compounds); Nickel And Cobalt; Which Are Known To The State Of California To Cause Cancer; And Arsenic And Chromium (hexavalent Compounds) Which Are Known To The Sta
- ABS Tone Ring Included: No
- Rust Resistant Coating: Yes
- Stud/Lug Hole Quantity: 5
- Solid Or Vented Type Rotor: Solid
- Nominal Thickness:
- 0.350 In.
- 8.80mm
- Surface Type: Smooth
- Construction: Full Cast
- Outside Diameter:
- 11.980 In.
- 304.40mm
- Discard Thickness:
- 0.300 In.
- 7.50mm
- Mounting Bolt Hole Circle Diameter:
- 114.30mm
- 4.500 In.
- Overall Height:
-
Features:
- EVO Coat Rust Preventative Coating
- Cast And Machined To Industry Leading Specifications
- OEM Vane Configuration And Weight
- Precision Machined To Ensure Parallelism
- Power Stop Evolution Coated rotors are a direct bolt-on replacement for factory equipment. Fully coated using Genuine GEOMET rust preventative coating; treated with a thin layer of Genuine GEOMET 360 coating to protect against rust and corrosion without influencing the vehicle's braking performance. Manufactured to original equipment specifications for fitment, weight, vane count, and performance.
- Sold Each. Purchase quantity 1 for 1 wheel
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine Designation | Engine | CID |
|---|---|---|---|---|---|---|
| 2007 - Honda CR-V | L | 2354 | Rear | K24Z1 | 4 Cyl 2.4L | 144 |
- EVOLUTION COATED ROTOR
- Evolution Genuine Geomet Coated Brake Rotor
- EVOLUTION GENUINE GEOMET FULLY COATED ROTORS
- Evolution Genuine Geomet(R) Coated Brake Rotor
- Product Attributes:
- Overall Height:
- 2.390 In.
- 60.60mm
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: This Product Can Expose You To Chemicals Including Arsenic; Chromium (hexavalent Compounds); Nickel And Cobalt; Which Are Known To The State Of California To Cause Cancer; And Arsenic And Chromium (hexavalent Compounds) Which Are Known To The Sta
- ABS Tone Ring Included: No
- Rust Resistant Coating: Yes
- Stud/Lug Hole Quantity: 5
- Solid Or Vented Type Rotor: Solid
- Nominal Thickness:
- 0.350 In.
- 8.80mm
- Surface Type: Smooth
- Construction: Full Cast
- Outside Diameter:
- 11.980 In.
- 304.40mm
- Discard Thickness:
- 0.300 In.
- 7.50mm
- Mounting Bolt Hole Circle Diameter:
- 114.30mm
- 4.500 In.
- Overall Height:
-
Features:
- EVO Coat Rust Preventative Coating
- Cast And Machined To Industry Leading Specifications
- OEM Vane Configuration And Weight
- Precision Machined To Ensure Parallelism
- Power Stop Evolution Coated rotors are a direct bolt-on replacement for factory equipment. Fully coated using Genuine GEOMET rust preventative coating; treated with a thin layer of Genuine GEOMET 360 coating to protect against rust and corrosion without influencing the vehicle's braking performance. Manufactured to original equipment specifications for fitment, weight, vane count, and performance.
- Sold Each. Purchase quantity 1 for 1 wheel
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 2007 - Honda CR-V | L | 2354 | Rear | 4 Cyl 2.4L | 144 |
- R-Line
- Product Attributes:
- Overall Height:
- 2.402
- 61.000
- Salability Restrictions: No
- Mounting Bolt Hole Diameter:
- 114.300
- 4.500
- Conventional Or Drum-In-Hat Type Rotor: Drum-in-hat
- Harmonize Code: 8708.30.5030
- Center Hole Diameter:
- 2.524
- 64.100
- Stud/Lug Hole Quantity: 5
- Solid Or Vented Type Rotor: Solid
- Nominal Thickness:
- 0.354
- 9.000
- Outside Diameter:
- 11.988
- 304.500
- Mounting Bolt Hole Quantity: 5
- Discard Thickness:
- 0.295
- 7.500
- UNSPSC Code: 25171715
- Mounting Bolt Hole Circle Diameter:
- 114.300
- 4.500
- Overall Height:
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
- Sold Each. Purchase quantity 1 for 1 wheel
This Part Fits the Following OEM/Substitute Numbers:
08.A355.10, 120.40063, 120.40063CRY, 121.40063, 126.40063CSL, 126.40063CSR, 126.40063SL, 126.40063SR, 127.40063CL, 127.40063CR, 127.40063L, 127.40063R, 128.40063CL, 128.40063CR, 128.40063L, 128.40063R, 14-31372, 20-31372...VIEW MORE
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2007 - Honda CR-V | Rear |
- R-Line
- Product Attributes:
- Overall Height:
- 1.858
- 47.200
- Salability Restrictions: No
- Mounting Bolt Hole Diameter:
- 114.300
- 4.500
- Conventional Or Drum-In-Hat Type Rotor: Conventional
- Harmonize Code: 8708.30.5030
- Center Hole Diameter:
- 2.524
- 64.100
- Stud/Lug Hole Quantity: 5
- Solid Or Vented Type Rotor: Vented
- Nominal Thickness:
- 1.102
- 28.000
- Outside Diameter:
- 11.654
- 296.000
- Mounting Bolt Hole Quantity: 5
- Discard Thickness:
- 1.024
- 26.000
- UNSPSC Code: 25171715
- Mounting Bolt Hole Circle Diameter:
- 114.300
- 4.500
- Overall Height:
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
- Sold Each. Purchase quantity 1 for 1 wheel
This Part Fits the Following OEM/Substitute Numbers:
083-3443, 120.40073, 120.40073CRY, 121.40073, 126.40073CSL, 126.40073CSR, 126.40073SL, 126.40073SR, 127.40073CL, 127.40073CR, 127.40073L, 127.40073R, 128.40073CL, 128.40073CR, 128.40073L, 128.40073R, 14-31455, 1407-79999...VIEW MORE
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2007 - Honda CR-V | Front |
- DS-One offers the ultimate electrophoretic coated performance brake parts on the market. The unique slot and drill disgn enigineered in North America makes our rotors fits any sides of your vehicle. The unmatched braking performance coupled with longer lasting components make our brake the best sellers in every category.
- DS-One Drilled and Slotted Performance Rotor
-
Features:
- Exclusive Drill and Slot design for left or right installation
- Precision Drilled and Diamond Slotted to for maximum heat dissipation
- Electrophoretic Coating provides a high corrosion-resistant finish for 360° of protection
- Manufactured with multiple alloys for improved heat dissipation and performance
- G3000 heat-flowed castings steel give our rotors the ideal balance between tensile and hardness and provide consistent wear, long life, and quiet operation
- Precision mill balanced to ensure smooth operation with no pedal pulsation
- Smooth Taper Free Finish provides less pad break-in time
- Vapour Corrosion Inhibitor (VCI) bag reduces rotor prep & saves installation time
- Quality validated for proper metallurgy and correct brake plate thickness
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
- Sold Each. Purchase quantity 1 for 1 wheel
This Part Fits the Following OEM/Substitute Numbers:
120.40063, 121.40063, 126352, 2164621, 248880294, 248881041, 2488811008, 31372, 48880294, 48881041, 488811008, 748880294, 748881041, 7488811008, 980294, 981041, AC31372, AG31372...VIEW MORE
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2007 - Honda CR-V | Rear |
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2007 - Honda CR-V | Rear |
- TQ offers the most comprehensible brake parts on the market. The unmatched braking performance coupled with longer lasting components make our brake the best sellers in every category.TQ brake parts are the go-to for thousands of reputed mechanical shops in North America and are now available to customers.
- Top Quality Rotor
-
Features:
- Exclusive G3000 heat-flowed castings steel give our rotors the ideal balance between tensile and hardness and provide consistent wear, long life, and quiet operation
- Manufactured with multiple alloys for improved heat dissipation and performance
- Double disc ground finish eliminates lateral run-out and DTV (disk thickness variation) issues on the rotor and improves pad-rotor bed-in
- Precision mill balanced to ensure smooth operation with no pedal pulsation
- Smooth Taper Free Finish provides less pad break-in time
- Quality validated for proper metallurgy and correct brake plate thickness
- Rounded radius for added strength
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
- Sold Each. Purchase quantity 1 for 1 wheel
This Part Fits the Following OEM/Substitute Numbers:
120.40073, 121.40073, 248880515, 31455, 48880515, 748880515, 900388, 980515, AC31455, AG31455, BD126456, BR900388, CR31455, HO-5013, PR31455, Q31455, YH145714, YH145714C...VIEW MORE
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2007 - Honda CR-V | Front |
- DS-One offers the ultimate electrophoretic coated performance brake parts on the market. The unique slot and drill disgn enigineered in North America makes our rotors fits any sides of your vehicle. The unmatched braking performance coupled with longer lasting components make our brake the best sellers in every category.
- DS-One Drilled and Slotted Performance Rotor
-
Features:
- Exclusive Drill and Slot design for left or right installation
- Precision Drilled and Diamond Slotted to for maximum heat dissipation
- Electrophoretic Coating provides a high corrosion-resistant finish for 360° of protection
- Manufactured with multiple alloys for improved heat dissipation and performance
- G3000 heat-flowed castings steel give our rotors the ideal balance between tensile and hardness and provide consistent wear, long life, and quiet operation
- Precision mill balanced to ensure smooth operation with no pedal pulsation
- Smooth Taper Free Finish provides less pad break-in time
- Vapour Corrosion Inhibitor (VCI) bag reduces rotor prep & saves installation time
- Quality validated for proper metallurgy and correct brake plate thickness
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
- Sold Each. Purchase quantity 1 for 1 wheel
This Part Fits the Following OEM/Substitute Numbers:
120.40073, 121.40073, 2164646, 248880515, 31455, 48880515, 748880515, 900388, 980515, AC31455, AG31455, BD126456, BD126456E, BR900388, CR31455, HO-5013, PR31455, YH145714...VIEW MORE
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2007 - Honda CR-V | Front |
- TQ offers the most comprehensible brake parts on the market. The unmatched braking performance coupled with longer lasting components make our brake the best sellers in every category.TQ brake parts are the go-to for thousands of reputed mechanical shops in North America and are now available to customers.
- Top Quality Rotor
-
Features:
- Exclusive G3000 heat-flowed castings steel give our rotors the ideal balance between tensile and hardness and provide consistent wear, long life, and quiet operation
- Manufactured with multiple alloys for improved heat dissipation and performance
- Double disc ground finish eliminates lateral run-out and DTV (disk thickness variation) issues on the rotor and improves pad-rotor bed-in
- Precision mill balanced to ensure smooth operation with no pedal pulsation
- Smooth Taper Free Finish provides less pad break-in time
- Quality validated for proper metallurgy and correct brake plate thickness
- Rounded radius for added strength
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
- Sold Each. Purchase quantity 1 for 1 wheel
This Part Fits the Following OEM/Substitute Numbers:
120.40063, 121.40063, 126352, 248880294, 248881041, 2488811008, 31372, 48880294, 48881041, 488811008, 748880294, 748881041, 7488811008, 980294, 981041, AC31372, AG31372, AHO5011...VIEW MORE
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2007 - Honda CR-V | Rear |
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2007 - Honda CR-V | Front |
Showing 1 - 10 of 12 products
Loading...