1995 Chevrolet S10 Electric Fuel Pump Parts
Choose your Engine for your 1995 Chevrolet S10
Image
Product
Price
- Electric Fuel Pump
- Fuel tank contamination is the leading cause of premature fuel pump failure. To reduce risk of contaminating the replacement pump, Delphi recommends cleaning the fuel tank before installing a new pump. Use of fuel tank cleaning kit FC01 is recommended.
- Product Attributes:
- Average Current Draw: 6
- Voltage: 14
- Fuel Type: Gas
- Pump Type: Electric
- Outlet Outside Diameter: 0.313
- Terminal Quantity: 2
- Wiring Harness Included: Yes
- Position(s): In-tank
- System Pressure: 12 Psi
- Terminal Type: Blade
- Terminal Gender: Male
- Average Flow Rating: 28
- Strainer Included: No
- 100 years of OE experience, supplier to the world's top automakers, OE Heritage and knowledge built into every aftermarket part, comprehensive portfolio for a wide range of vehicles and model years.
This Part Fits the Following OEM/Substitute Numbers:
1AMFP00035, 25028889, 25115057, 25115097, 25115462, 25115463, 25115764, 25115951, 25115981, 25116164, 25116279, 25116280, 25116281, 25116285, 25116286, 25116562, 25117505, 25117506...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | Engine VIN | CID |
|---|---|---|---|---|---|---|
| 1995 - Chevrolet S10 | V | - | In-Tank | 6 Cyl 4.3L | Z | 262 |
- Electric Fuel Pump
- Fuel tank contamination is the leading cause of premature fuel pump failure. To reduce risk of contaminating the replacement pump, Delphi recommends cleaning the fuel tank before installing a new pump. Use of fuel tank cleaning kit FC01 is recommended.
- Product Attributes:
- Voltage: 14
- Maximum Pressure: 85.0
- Pump Type: Electric
- Fuel Type: Gas
- Outlet Outside Diameter: 0.313
- Terminal Quantity: 2
- Wiring Harness Included: No
- Position(s): In-tank
- System Pressure: 62 Psi
- Terminal Type: Pin
- Terminal Gender: Male
- Strainer Included: No
- 100 years of OE experience, supplier to the world's top automakers, OE Heritage and knowledge built into every aftermarket part, comprehensive portfolio for a wide range of vehicles and model years.
This Part Fits the Following OEM/Substitute Numbers:
19111391, 19111404, 19111414, 19180455, 1AMFP00011, 25028327, 25029911, 25116853, 25116881, 25117264, 25117454, 25163464, 25163473, 25164429, 5211002, 69225, 69226, 951-5002...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | Engine VIN | CID |
|---|---|---|---|---|---|---|
| 1995 - Chevrolet S10 | V | - | In-Tank | 6 Cyl 4.3L | W | 262 |
- Electric Fuel Pump
- Fuel tank contamination is the leading cause of premature fuel pump failure. To reduce risk of contaminating the replacement pump, Delphi recommends cleaning the fuel tank before installing a new pump. Use of fuel tank cleaning kit FC01 is recommended.
- Product Attributes:
- Average Current Draw: 4
- Voltage: 14
- Maximum Pressure: 71.0
- Fuel Type: Gas
- Pump Type: Electric
- Outlet Outside Diameter: 0.313
- Terminal Quantity: 2
- Wiring Harness Included: No
- Position(s): In-tank
- System Pressure: 44 Psi
- Terminal Type: Pin
- Terminal Gender: Male
- Strainer Included: No
- 100 years of OE experience, supplier to the world's top automakers, OE Heritage and knowledge built into every aftermarket part, comprehensive portfolio for a wide range of vehicles and model years.
This Part Fits the Following OEM/Substitute Numbers:
19111392, 1AMFP00038, 25028349, 25116167, 25116525, 25163468, 5211004, 5211006, 69222, 69223, 950-0168, 951-5003, AFS0206P, AFS0207P, CFE0113, E16027, E16029, E219652...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 1995 - Chevrolet S10 | L | 2190 | In-Tank | 4 Cyl 2.2L | 134 |
- Fuel Pump - Electric In Tank
- with Offset Plastic Outlet Tube; Includes Hose, Clamps, Connectors, Tank Seals, and Wires
- Product Attributes:
- Voltage: 12v
- Minimum Flow Rating: 21.0
- Negative Ground: Yes
- Mounting Hardware Included: No
- Pump Type: Electric
- Fuel Sending Unit Included: No
- Length: 132.0
- Fuel Pump Inlet Type: Strainer
- Connector Shape: Rectangle
- Outlet Outside Diameter: 9.7
- Terminal Quantity: 2
- Mounting Bracket Included: No
- Minimum Pressure: 13.0
- Seal And Lock Ring Included: No
- Wiring Harness Included: Yes
- Terminal Type: Pin
- Terminal Gender: Male
- Inlet Outside Diameter: 19.0
- Regulator Included: No
- Strainer Included: No
- The Carter Fuel Systems program features unique innovation and solutions by offering premium OE fit, form, and function as well as exceptional vehicle coverage and exclusive problem-solving features.
This Part Fits the Following OEM/Substitute Numbers:
1234664, 152010, 25115097, 25115462, 25116588, 25117506, 25166252, 25166716, 25166717, 25166801, 25167089, 25168719, 2910211, 2910285, 530-1101, 530-1102, 6472311, 6472358...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | Fuel Delivery SubType | CID |
|---|---|---|---|---|---|---|
| 1995 - Chevrolet S10 | V | - | In-Tank | 6 Cyl 4.3L | TBI | 262 |
- This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
- Lifetime Warranty
Additional Fitment Information:
| Vehicle | Engine Designation |
|---|---|
| 1995 - Chevrolet S10 | LB4 |
- Electric Fuel Pump
- Check Eng. VIN OE Replacement Fuel Pump
- Electric Fuel Pump
- New Electric Fuel Pump
- Product Attributes:
- Negative Ground: Yes
- Mounting Hardware Included: Yes
- Inlet Outside Diameter: 19.000
- Regulator Included: No
- Mounting Bracket Included: No
- Strainer Included: No
- Seal And Lock Ring Included: No
- Electric Fuel Pump
This Part Fits the Following OEM/Substitute Numbers:
25163464, 25163473, 69225, 69226, E3270, FE0114, P74037, P74074, P74167, SP1115
Additional Fitment Information:
| Vehicle | Engine VIN |
|---|---|
| 1995 - Chevrolet S10 | W |
- This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
- Lifetime Warranty
Additional Fitment Information:
| Vehicle | Engine Designation |
|---|---|
| 1995 - Chevrolet S10 | L35 |
Additional Fitment Information:
| Vehicle | Engine Designation |
|---|---|
| 1995 - Chevrolet S10 | L35 |
- With 1.25 inch Diameter Pump
- Engineered and manufactured in a highly automated and dust-free environment, all Agility fuel system products meet or exceed all OEM specifications. Premium quality is ensured through stringent performance and reliability testing. Our enhanced packaging, which includes double wall corrugation and airbag protection, ensures our product is well protected to endure the rigors of modern shipping. All Agility fuel system components are drop-in replacements right out of the box with all the necessary components included
- Agility
-
Features:
- Carbon Commutators are used to ensure a long product life expectancy
- Precision tested fuel level sensor ensures vehicle's fuel gauge will always provide an accurate reading at any fuel level
- Includes fuel strainer for smoother installation process and ensures a clean fuel system upon replacement, 100% leak, flowrate and pressure tested
- Improved connectors to eliminate excessive electrical resistance and provide better heat dissipation compared to OE
- Fuel level sensor utilizes palladium silver alloy for increase durability and better resistance against bad fuel
- High flow pumps utilize carbon commutators which increases durability and generates less heat, ensuring longer pump life
This Part Fits the Following OEM/Substitute Numbers:
00210059, 4020113, E3240, SP1120
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1995 - Chevrolet S10 | L | 2190 | 4 Cyl 2.2L | 134 |
Showing 1 - 10 of 11 products
Loading...