1964 Oldsmobile Jetstar I Engine Coolant Thermostat Parts
Choose your Submodel for your 1964 Oldsmobile Jetstar I
Image
Product
Price
- Thermostat-195 Degrees
- Temperature 195F Higher Alternate Temp
- Economy
- Product Attributes:
- Sealing Flange Outside Diameter: 2.13
- Flange Thickness: 0.038 In
- Temperature (Degree): 195
- Manufactured with OEM quality materials and safety standards by an OE Supplier. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant. Offset design, air relief valve, and OEM style seals included where applicable
This Part Fits the Following OEM/Substitute Numbers:
12TE1E, 13009, 131-87, 13309, 13839, 1601-290217, 16309, 269, 300-195, 3009, 30095, 33509, 36309, 9300195, P3009, S300195, S330195
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1964 - Oldsmobile Jetstar I | V | 6458 | 8 Cyl 6.5L | 394 |
- Thermostat-160 Degrees
- Temperature 160F Alternate Temp
- Economy
- Product Attributes:
- Sealing Flange Outside Diameter: 2.13
- Flange Thickness: 0.038 In
- Temperature (Degree): 160
- Manufactured with OEM quality materials and safety standards by an OE Supplier. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant. Offset design, air relief valve, and OEM style seals included where applicable
This Part Fits the Following OEM/Substitute Numbers:
12TE1B, 13006, 13306, 160-003, 1601-290215, 16306, 300-160, 3006, 30060, 36306, 9300160, P3006, S300160, S330160
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1964 - Oldsmobile Jetstar I | V | 6458 | 8 Cyl 6.5L | 394 |
- Thermostat-195 Degrees
- Temperature 195F Includes thermostat Higher Alternate Temp
- Standard
- Product Attributes:
- Sealing Flange Outside Diameter: 2.13
- Flange Thickness: 0.06 In
- Temperature (Degree): 195
- Manufactured with OEM quality materials and safety standards by an OE Supplier. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant. Offset design, air relief valve, and OEM style seals included where applicable
This Part Fits the Following OEM/Substitute Numbers:
10190925, 10207373, 12514334, 12T1E, 131-71, 131-73, 13359, 15359, 1601-290203, 183, 200-195, 20095, 33009, 3359, 35359, 4131240, 4387494, 4494469...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1964 - Oldsmobile Jetstar I | V | 6458 | 8 Cyl 6.5L | 394 |
- Thermostat-180 Degrees
- Temperature 180F OEM Recommended Temp
- Economy
- Product Attributes:
- Sealing Flange Outside Diameter: 2.13
- Flange Thickness: 0.038 In
- Temperature (Degree): 180
- Manufactured with OEM quality materials and safety standards by an OE Supplier. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant. Offset design, air relief valve, and OEM style seals included where applicable
This Part Fits the Following OEM/Substitute Numbers:
12TE1D, 13008, 131-75, 13308, 13838, 15308, 1601-290216, 16308, 169, 300-180, 3008, 30080, 33508, 36308, 9300180, P3008, S300180, S330180...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1964 - Oldsmobile Jetstar I | V | 6458 | 8 Cyl 6.5L | 394 |
- Thermostat-160 Degrees
- Temperature 160F Alternate Temp
- Standard
- Product Attributes:
- Sealing Flange Outside Diameter: 2.13
- Flange Thickness: 0.06 In
- Temperature (Degree): 160
- Manufactured with OEM quality materials and safety standards by an OE Supplier. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant. Offset design, air relief valve, and OEM style seals included where applicable
This Part Fits the Following OEM/Substitute Numbers:
107596C1, 12T1B, 13356, 15356, 1601-24098, 200-160, 20060, 33006, 3356, 35356, 377156R91, 70, 9200160, D5PZ8575A, GTS102, P3356, S335160
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1964 - Oldsmobile Jetstar I | V | 6458 | 8 Cyl 6.5L | 394 |
- Jeep Wrangler 2.5L/4.0L/4.2L Racing Thermostat, 1987-2006
- Racing Thermostat, fits Jeep Wrangler 2.5L/4.0L/4.2L 1987-2006
- Product Attributes:
- SellingPoint04: N/a
- SellingPoint15: N/a
- SellingPoint05: N/a
- SellingPoint06: N/a
- SellingPoint07: N/a
- Install Difficulty: 2
- SellingPoint11: N/a
- SellingPoint01: Activates At Lower Temperature So Coolant Flows Through System Earlier
- SellingPoint12: N/a
- TechSpec Engine Codes: N/a
- SellingPoint02: Allows For Cooler Engine Temperatures
- SellingPoint13: N/a
- SellingPoint03: Mishimoto Lifetime Warranty
- SellingPoint14: N/a
- TechSpec Chassis Codes: N/a
- SellingPoint08: N/a
- SellingPoint09: N/a
- TechSpec Applications: Click Here For Additional Fitments
- TechSpec Includes: (1) Mishimoto Thermostat--mishimoto Lifetime Warranty
- TechSpec OEM Activation Temperature (F): 195
- SellingPoint10: N/a
- TechSpec Mishimoto Activation Temperature (F): 180
- TechSpec Note: N/a
-
Features:
- Activates at lower temperature so coolant
- Allows for cooler engine temperatures
- Mishimoto Lifetime Warranty
- Mishimoto is proud to release a racing thermostat engineered to improve the cooling efficiency of your vehicle.Whether you are cruising to a show in your Monte Carlo or lifting the front tires at the strip in your Mustang, an effective cooling system is critical to the life of your engine.Mishimoto racing thermostats promote greater cooling efficiency by significantly decreasing high engine temperatures.Once the engine is fully warmed up, the Mishimoto low-temperature racing thermostat will open at a lower temperature (180 F) compared to standard thermostats (195 F).This allows coolant to flow through the engine sooner, thus reducing and maintaining cooler engine temperatures.Decreased temperatures will result in reduced engine wear and improved reliability.See below for specific vehicle fitment information.As with all our products, this thermostat includes the Mishimoto lifetime warranty.
Additional Fitment Information:
| Vehicle | Sub Model |
|---|---|
| 1964 - Oldsmobile Jetstar I | Base |
- Jeep Wrangler 2.5L/4.0L/4.2L Racing Thermostat, 1987-2006
- Racing Thermostat, fits Jeep Wrangler 2.5L/4.0L/4.2L 1987-2006
- Product Attributes:
- SellingPoint04: N/a
- SellingPoint05: N/a
- SellingPoint06: N/a
- SellingPoint07: N/a
- SellingPoint01: Activates At Lower Temperature So Coolant Flows Through System Earlier
- SellingPoint02: Allows For Cooler Engine Temperatures
- SellingPoint03: Mishimoto Lifetime Warranty
- TechSpec Chassis Codes: N/a
- SellingPoint08: N/a
- SellingPoint09: N/a
- TechSpec OEM Activation Temperature (F): 195
- SellingPoint10: N/a
- TechSpec Note: N/a
- Prop 65 (C, R or CR): Cr
- SellingPoint15: N/a
- Install Difficulty: 2
- SellingPoint11: N/a
- SellingPoint12: N/a
- TechSpec Engine Codes: N/a
- SellingPoint13: N/a
- SellingPoint14: N/a
- TechSpec Applications: Click Here For Additional Fitments
- TechSpec Includes: (1) Mishimoto Thermostat--mishimoto Lifetime Warranty
- TechSpec Mishimoto Activation Temperature (F): 180
-
Features:
- Activates at lower temperature so coolant
- Allows for cooler engine temperatures
- Mishimoto Lifetime Warranty
- Mishimoto is proud to release a racing thermostat engineered to improve the cooling efficiency of your vehicle.Whether you are cruising to a show in your Monte Carlo or lifting the front tires at the strip in your Mustang, an effective cooling system is critical to the life of your engine.Mishimoto racing thermostats promote greater cooling efficiency by significantly decreasing high engine temperatures.Once the engine is fully warmed up, the Mishimoto low-temperature racing thermostat will open at a lower temperature (180 F) compared to standard thermostats (195 F).This allows coolant to flow through the engine sooner, thus reducing and maintaining cooler engine temperatures.Decreased temperatures will result in reduced engine wear and improved reliability.See below for specific vehicle fitment information.As with all our products, this thermostat includes the Mishimoto lifetime warranty.
Additional Fitment Information:
| Vehicle | Region |
|---|---|
| 1964 - Oldsmobile Jetstar I | United States |
- High Flow Thermostat-180 Degrees
- Temperature 180F OEM Recommended Temp
- High Flow
- Product Attributes:
- Sealing Flange Outside Diameter: 2.13
- Flange Thickness: 0.05 In
- Temperature (Degree): 180
- Manufactured with OEM quality materials and safety standards by an OE Supplier. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant. Offset design, air relief valve, and OEM style seals included where applicable
This Part Fits the Following OEM/Substitute Numbers:
12TP1D, 15358, 15358DLG, 1601-291018, 2000-180, 33008S, 359-180, 45358, 65008, 65358, 92000180, P15358
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1964 - Oldsmobile Jetstar I | V | 6458 | 8 Cyl 6.5L | 394 |
- Fail-Safe Thermostat-160 Degrees
- "The patented Fail-Safe (R) thermostat is the only thermostat on the market designed to lock in the open position, allowing coolant to continue to flow in the event of overheating." Temperature 160F Alternate Temp
- Fail-Safe
- Product Attributes:
- Sealing Flange Outside Diameter: 2.13
- Flange Thickness: 0.05 In
- Temperature (Degree): 160
- Manufactured with OEM quality materials and safety standards by an OE Supplier. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant. Offset design, air relief valve, and OEM style seals included where applicable
This Part Fits the Following OEM/Substitute Numbers:
1601-290988, 70060, 7200-160, 97200160, NI, P7200-160, SS160-0072
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1964 - Oldsmobile Jetstar I | V | 6458 | 8 Cyl 6.5L | 394 |
- Thermostat-180 Degrees
- Temperature 180F OEM Recommended Temp
- Standard
- Product Attributes:
- Sealing Flange Outside Diameter: 2.13
- Flange Thickness: 0.06 In
- Temperature (Degree): 180
- Manufactured with OEM quality materials and safety standards by an OE Supplier. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant. Offset design, air relief valve, and OEM style seals included where applicable
This Part Fits the Following OEM/Substitute Numbers:
10207381, 12T1D, 13358, 15358, 1601-24271, 170, 200-180, 20080, 3054228, 33008, 3358, 35358, 4086415, 7324932, 9200180, D5PZ8575B, P3358, S335180...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1964 - Oldsmobile Jetstar I | V | 6458 | 8 Cyl 6.5L | 394 |
Showing 1 - 10 of 16 products
Loading...