2010 Chrysler Sebring Engine Coolant Thermostat Parts
Choose your Engine for your 2010 Chrysler Sebring
Image
Product
Price
- Thermostat-195 Degrees
- Temperature 195F Includes seal OEM Recommended Temp
- Standard
- Product Attributes:
- Installation Tool Included: No
- Sealing Flange Outside Diameter: 1.81
- Flange Thickness: 0.05 In
- Gasket/Seal Material: Rubber
- Jiggle Pin Weep Hole: Yes
- Temperature (Degree): 195
- Manufactured with OEM quality materials and safety standards by an OE Supplier. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant. Offset design, air relief valve, and OEM style seals included where applicable
This Part Fits the Following OEM/Substitute Numbers:
1601-325904, 195-656, 34799, 4666140AA, 56569, 656-195, 65695, 68273161AA, 9656195, P65695, QRT11
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2010 - Chrysler Sebring | V | 3497 | 6 Cyl 3.5L | 215 |
- Primary; Located Between Water Inlet And Coolant Adapter; 170 Degrees; Includes Seal
- Thermostat; Primary; Located Between Water Inlet And Coolant Adapter; 170 Degrees; Includes Seal;
- Thermostat
- Product Attributes:
- Temperature: 170° F
- WARNING CA Proposition 65: No
-
Features:
- Thermostat
- Crown Automotive is the premiere manufacturer and distributor of quality replacement parts for Jeep(R) CJ(TM), Wrangler(TM), Cherokee(TM), Grand Cherokee(TM), Liberty(TM), and Commander(TM). With over 8,000 different parts in stock for Jeep(R) vehicles from 1942 on up, Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory-discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission and transfer case components. Crown Automotive also offers an exclusive line of component kits and accessory products. Because we know that Jeeps are driven harder than most other vehicles, we emphasize offering only quality parts. In fact, we test parts on Jeeps before distributing them to our dealers to insure that they meet our standards for quality. Crown also supports its entire line with a 12 month/12,000 mile warranty to insure our dealers and their customers of our commitment to offering quality parts.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2010 - Chrysler Sebring | L | 2360 | 4 Cyl 2.4L | 144 |
- Secondary Located Between Coolant Adapter And Cylinder Head; 203 Degrees; Includes Seal
- Thermostat; Secondary Thermostat; Located Between Coolant Adapter And Cylinder Head; 203 Degrees; Includes Seal;
- Thermostat
- Product Attributes:
- Temperature: 203° F
- WARNING CA Proposition 65: No
-
Features:
- Thermostat
- Crown Automotive is the premiere manufacturer and distributor of quality replacement parts for Jeep(R) CJ(TM), Wrangler(TM), Cherokee(TM), Grand Cherokee(TM), Liberty(TM), and Commander(TM). With over 8,000 different parts in stock for Jeep(R) vehicles from 1942 on up, Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory-discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission and transfer case components. Crown Automotive also offers an exclusive line of component kits and accessory products. Because we know that Jeeps are driven harder than most other vehicles, we emphasize offering only quality parts. In fact, we test parts on Jeeps before distributing them to our dealers to insure that they meet our standards for quality. Crown also supports its entire line with a 12 month/12,000 mile warranty to insure our dealers and their customers of our commitment to offering quality parts.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2010 - Chrysler Sebring | L | 2360 | 4 Cyl 2.4L | 144 |
- Thermostat-192 Degrees
- Temperature 190F Includes seal OEM Recommended Temp
- Standard
- Product Attributes:
- Installation Tool Included: No
- Sealing Flange Outside Diameter: 2.13
- Flange Thickness: 0.05 In
- Gasket/Seal Material: Rubber
- Jiggle Pin Weep Hole: Yes
- Temperature (Degree): 192
- Manufactured with OEM quality materials and safety standards by an OE Supplier. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant. Offset design, air relief valve, and OEM style seals included where applicable
This Part Fits the Following OEM/Substitute Numbers:
12T101E, 14349, 1601-99991, 33917, 33917S, 36349, 378-190, 449-190, 44990, 46349, 4663729AE, 5159157AA, 54990, 68023515AA, 68237102AA, 9449190, P44990, QRT51...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2010 - Chrysler Sebring | V | 2736 | 6 Cyl 2.7L | 167 |
- This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
- with Housing
- Includes Coolant Outlet Cover and Gasket
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2010 - Chrysler Sebring | V | 3497 | 6 Cyl 3.5L | 215 |
- OE Solutions
- Secondary - At Inlet Pipe
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2010 - Chrysler Sebring | L | 2360 | 4 Cyl 2.4L | 144 |
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2010 - Chrysler Sebring | L | 2360 | 4 Cyl 2.4L | 144 |
- Thermostat-170 Degrees
- Temperature 170F Includes seal Located at water inlet OEM Recommended Temp
- Standard
- Product Attributes:
- Installation Tool Included: No
- Sealing Flange Outside Diameter: 2.25
- Flange Thickness: 0.05 In
- Bypass Diameter: 1.09 In
- Gasket/Seal Material: Rubber
- Jiggle Pin Weep Hole: Yes
- Bypass Length: 1.41 In
- Temperature (Degree): 170
- Manufactured with OEM quality materials and safety standards by an OE Supplier. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant. Offset design, air relief valve, and OEM style seals included where applicable
This Part Fits the Following OEM/Substitute Numbers:
15167, 1601-325906, 34207, 46167, 473170, 55111016AC, 55111016AD, 55111016AE, 56587, 658-170, 65870, 9658170, P65870, QRT27
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2010 - Chrysler Sebring | L | 2360 | 4 Cyl 2.4L | 144 |
- Fail-Safe Thermostat-195 Degrees
- "The patented Fail-Safe (R) thermostat is the only thermostat on the market designed to lock in the open position, allowing coolant to continue to flow in the event of overheating." Temperature 195F Includes thermostat and seal OEM Recommended Temp
- Fail-Safe
- Product Attributes:
- Installation Tool Included: No
- Sealing Flange Outside Diameter: 1.81
- Flange Thickness: 0.05 In
- Gasket/Seal Material: Rubber
- Jiggle Pin Weep Hole: No
- Temperature (Degree): 195
- Manufactured with OEM quality materials and safety standards by an OE Supplier. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant. Offset design, air relief valve, and OEM style seals included where applicable
This Part Fits the Following OEM/Substitute Numbers:
7656-195, 76561, 97656195, NI, P7656-195, SS195-6567
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2010 - Chrysler Sebring | V | 3497 | 6 Cyl 3.5L | 215 |
- Thermostat-203 Degrees
- Temperature 203F Includes seal Located at water pass through OEM Recommended Temp
- Standard
- Product Attributes:
- Installation Tool Included: No
- Sealing Flange Outside Diameter: 1.72
- Flange Thickness: 0.05 In
- Gasket/Seal Material: Rubber
- Jiggle Pin Weep Hole: No
- Temperature (Degree): 203
- Manufactured with OEM quality materials and safety standards by an OE Supplier. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant. Offset design, air relief valve, and OEM style seals included where applicable
This Part Fits the Following OEM/Substitute Numbers:
15122, 1601-325905, 34172, 470203, 55111017AC, 55111017AD, 56572, 657-203, 65703, 9657203, P65703, QRT64
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2010 - Chrysler Sebring | L | 2360 | 4 Cyl 2.4L | 144 |
Showing 1 - 10 of 12 products
Loading...