1985 Isuzu I Mark Engine Oil Filter Parts
Choose your Engine for your 1985 Isuzu I-Mark
Image
Product
Price
- Oil Filter
- H-3.406 in.; OD-3.15 in.; M20 x 1.5-6H Thread; psi Relief Valve 11-17 Premium Oil Filter w/Wrench Off Nut
- K/N Wrench-Off oil filters are engineered to help ensure high flow rates and exceptional protection from contaminants. Each filter comes with a hex nut welded to the top of the canister; allowing for easy removal with a standard wrench.
- Performance Gold Oil Filter
- Product Attributes:
- Removal Nut Size: 1.000 In.
- WARNING CA Proposition 65: No
- Bypass Valve: Yes
- Item Weight: 0.800 Lbs. (0.3 Kg)
- Product Box Height: 4.000 In. (102mm)
- Filter Material: High Flow Premium Media
- Gasket Material: Viton Rubber
- Product Box Width: 3.190 In. (81mm)
- Package Material: Paperboard
- Product Box Length: 3.190 In. (81mm)
- PSI Relief Valve: 11-17
- Removal Nut: Yes
- Item Height: 3.406 In. (87mm)
- Package Type: Box
- Anti-Drain Back Valve: Yes
-
Features:
- OE Replacement Oil Filter
- 1 in. Exposed Nut Designed For Easy Oil Filter Removal
- Heavy Duty Construction For Extreme Conditions
- Anti-Drain Back Valve - Where Applicable - Eliminates Dry Starts
- K&N premium oil filters are meticulously engineered to offer outstanding filtration and engine protection. Designed to operate with all synthetic, conventional, and blended motor oils, K&N's pleated synthetic-blend filtration media helps to shield your engine from contaminants and ensure a consistent flow of oil. The heavy-duty canister is engineered to be exceptionally durable, and a one-inch welded hex nut can be used for quick and easy filter removal. Each filter is specifically designed to withstand the service intervals recommended by vehicle manufacturers, and is protected by the K&N 1-Year Limited Warranty.
This Part Fits the Following OEM/Substitute Numbers:
102703301, 104079A1, 1146934, 116182, 116509, 11713229, 11900535100, 11900535151, 119530030, 11966035150, 1200664, 121433, 1216382301, 12195035152, 12195035153, 1220827, 1220833, 12445035100...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1985 - Isuzu I-Mark | L | 1471 | 4 Cyl 1.5L | - |
- Spin-on Oil Filter Supersedes DL3593A (Consolidation)
- DEFENSE
- Product Attributes:
- Reusable: No
- Grade Type: Regular
- Replacable Filter: Yes
- Gasket Inside Diameter: 2.125
- Height: 3.14
- Non Slip Grip: No
- Gasket Thickness: 0.200
- Torque Nut: No
- Attachment Type: Spin-on
- Gasket Type: Base
- Housing Color: White
- Inside Thread Diameter: M20x1.5
- Bypass Relief Valve Setting: 12
- Inlet Type: Threaded
- Outside Diameter: 3
- Grade: Advanced
- Gasket Outside Diameter: 2.415
- Bypass Relief Valve: Yes
- Filter Media Material: Cellulose/synthetic Blend
- Anti-Drain Back Valve: Yes
This Part Fits the Following OEM/Substitute Numbers:
102703301, 122-0827, 1301, 1334, 15208-AA031, 15208-AA100, 15208-AA130, 15208-AA170, 15241-32092, 15410-ZJA-99AH, 16271-32090, 16271-32092, 16546-65F0E, 17-1706-8, 17-1723-6, 17-1741-2, 17-1893-0, 183...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1985 - Isuzu I-Mark | L | 1471 | 4 Cyl 1.5L | - |
- Supersedes PH3593A (Consolidation) Spin-on Oil Filter
- Extra Guard
- Product Attributes:
- Reusable: No
- Grade Type: Regular
- Replacable Filter: Yes
- Gasket Inside Diameter: 2.130
- Height: 3.080
- Non Slip Grip: Yes
- Gasket Thickness: 0.200
- Torque Nut: No
- Attachment Type: Spin-on
- Burst Pressure: 310.000
- Gasket Type: Base
- Housing Color: Orange
- Inside Thread Diameter: M20x1.5
- Bypass Relief Valve Setting: 9-15
- Inlet Type: Threaded
- Outside Diameter: 3.020
- Grade: Advanced
- Gasket Outside Diameter: 2.420
- Bypass Relief Valve: Yes
- Filter Media Material: Cellulose/synthetic Blend
- Anti-Drain Back Valve: Yes
This Part Fits the Following OEM/Substitute Numbers:
102703301, 122-0827, 1301, 1334, 15208-AA031, 15208-AA100, 15208-AA130, 15208-AA170, 15241-32092, 15410-ZJA-99AH, 16271-32090, 16271-32092, 16546-65F0E, 17-1706-8, 17-1723-6, 17-1741-2, 17-1893-0, 183...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1985 - Isuzu I-Mark | L | 1471 | 4 Cyl 1.5L | - |
- Spin-on Oil Filter Supersedes TG3593A (Consolidation)
- Tough Guard
- Product Attributes:
- Reusable: No
- Grade Type: Premium
- Replacable Filter: Yes
- Gasket Inside Diameter: 2.130
- Height: 3.080
- Non Slip Grip: Yes
- Gasket Thickness: 0.200
- Torque Nut: No
- Attachment Type: Spin-on
- Burst Pressure: 310.000
- Gasket Type: Base
- Housing Color: Silver
- Inside Thread Diameter: M20x1.5
- Bypass Relief Valve Setting: 9-15
- Inlet Type: Threaded
- Outside Diameter: 3.020
- Grade: Premium
- Gasket Outside Diameter: 2.420
- Bypass Relief Valve: Yes
- Filter Media Material: Cellulose/synthetic Blend
- Anti-Drain Back Valve: Yes
This Part Fits the Following OEM/Substitute Numbers:
102703301, 11541, 122-0827, 1301, 1334, 15208-AA031, 15208-AA100, 15208-AA130, 15208-AA170, 15241-32092, 15410-ZJA-99AH, 16271-32090, 16271-32092, 16546-65F0E, 17-1706-8, 17-1723-6, 17-1741-2, 17-1893-0...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1985 - Isuzu I-Mark | L | 1471 | 4 Cyl 1.5L | - |
- Spin-on Oil Filter Supersedes XG3593A (Consolidation)
- Ultra Synthetic
- Product Attributes:
- Reusable: No
- Grade Type: Premium
- Replacable Filter: Yes
- Gasket Inside Diameter: 2.130
- Height: 3.080
- Non Slip Grip: Yes
- Gasket Thickness: 0.200
- Torque Nut: No
- Attachment Type: Spin-on
- Burst Pressure: 310.000
- Gasket Type: Base
- Housing Color: Gold
- Inside Thread Diameter: M20x1.5
- Bypass Relief Valve Setting: 9-15
- Inlet Type: Threaded
- Outside Diameter: 3.020
- Grade: Ultimate
- Gasket Outside Diameter: 2.420
- Bypass Relief Valve: Yes
- Filter Media Material: Synthetic
- Anti-Drain Back Valve: Yes
This Part Fits the Following OEM/Substitute Numbers:
102703301, 122-0827, 1301, 1334, 15208-AA031, 15208-AA100, 15208-AA130, 15208-AA170, 15241-32092, 15410-ZJA-99AH, 16271-32090, 16271-32092, 16546-65F0E, 17-1706-8, 17-1723-6, 17-1741-2, 17-1893-0, 1719859...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1985 - Isuzu I-Mark | L | 1471 | 4 Cyl 1.5L | - |
- WIX Spin-On Lube Filter
- Master Pack Version; Manufacturer OE Recommended Oil Change Intervals
- Product Attributes:
- California Proposition 65: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Inner Diameter Top: Closed
- Outer Diameter Top: 3.15
- Burst Pressure: 280
- Duty Type: Ld
- Micron: 19.00
- BetaRatio: 2/20=6/20
- Bypass Relief Valve Setting: 8-11
- Flow Rate: 9-11 Gpm
- Media Material: Enhanced Cellulose
- Class: A
- WIX Oil Filters provide excellent engine protection using conventional, synthetic, or synthetic-blended motor oils, as recommended by the OE vehicle manufacturer, for normal and severe driving conditions such as stop and go traffic, dirt roads, construction sites, short trips, and interstate travel. WIX filters are recommended for OEM oil and filter change intervals, typically 3,750 to 10,000 miles, not to exceed 12 months. This filter traps up to 50% more dirt and contaminants than Protec with the best combination of capacity & efficiency for severe conditions. When applicable, WIX flexible silicone anti-drainback valve protects against dry engine starts past the traditional filter change interval. Laboratory Test Performance per ISO 454812 18 grams dirt (WIX 51515), 99% efficient at 23 microns (Based on WIX 51515, WIX 51356, WIX 57060)
- This item must be purchased in quantities of 12
This Part Fits the Following OEM/Substitute Numbers:
1334MP, 21334MP, 3593A, 51334MP, 520532091, 61334BP, 618-51334MP, 85334MP, B4459MP, LF3462, PH2808B, PH3593AFP, PH9688FP, R85334MP, V4459BP
Additional Fitment Information:
| Vehicle | Block | CC | Region | Engine | CID |
|---|---|---|---|---|---|
| 1985 - Isuzu I-Mark | L | 1471 | Canada | 4 Cyl 1.5L | - |
- WIX Spin-On Lube Filter
- Also Available In Master Pack Version; Manufacturer OE Recommended Oil Change Intervals
- Product Attributes:
- California Proposition 65: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Inner Diameter Top: Closed
- Outer Diameter Top: 3.15
- Burst Pressure: 280
- Duty Type: Ld
- Micron: 21.00
- BetaRatio: 2/20=6/20
- Bypass Relief Valve Setting: 8-11
- Flow Rate: 9-11 Gpm
- Media Material: Enhanced Cellulose
- Class: A
- WIX Oil Filters provide excellent engine protection using conventional, synthetic, or synthetic-blended motor oils, as recommended by the OE vehicle manufacturer, for normal and severe driving conditions such as stop and go traffic, dirt roads, construction sites, short trips, and interstate travel. WIX filters are recommended for OEM oil and filter change intervals, typically 3,750 to 10,000 miles, not to exceed 12 months. This filter traps up to 50% more dirt and contaminants than Protec with the best combination of capacity & efficiency for severe conditions. When applicable, WIX flexible silicone anti-drainback valve protects against dry engine starts past the traditional filter change interval. Laboratory Test Performance per ISO 454812 18 grams dirt (WIX 51515), 99% efficient at 23 microns (Based on WIX 51515, WIX 51356, WIX 57060)
This Part Fits the Following OEM/Substitute Numbers:
0 451 103 275, 0 451 103 316, 0 986 452 006, 0 986 452 007, 0 986 452 016, 0 986 452 036, 0 986 452 059, 0 986 452 916, 0 986 AF0 047, 0 986 AF0 064, 0 986 AF1 038, 0 986 AF1 093, 0 986 AF1 181, 0 RF03 23 802, 0 RF03 23802A, 000.14.145, 0116331, 0370-23802...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Region | Engine | CID |
|---|---|---|---|---|---|
| 1985 - Isuzu I-Mark | L | 1471 | Canada | 4 Cyl 1.5L | - |
- WIX Spin-On Lube Filter
- Manufacturer OE Recommended Oil Change Intervals
- Product Attributes:
- California Proposition 65: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Inner Diameter Top: Closed
- Outer Diameter Top: 3.661
- Burst Pressure: 275
- Duty Type: Ld
- Micron: 21.00
- BetaRatio: 2/20=6/20
- Bypass Relief Valve Setting: 13-19
- Flow Rate: 9-11 Gpm
- Media Material: Enhanced Cellulose
- Class: A
- WIX Oil Filters provide excellent engine protection using conventional, synthetic, or synthetic-blended motor oils, as recommended by the OE vehicle manufacturer, for normal and severe driving conditions such as stop and go traffic, dirt roads, construction sites, short trips, and interstate travel. WIX filters are recommended for OEM oil and filter change intervals, typically 3,750 to 10,000 miles, not to exceed 12 months. This filter traps up to 50% more dirt and contaminants than Protec with the best combination of capacity & efficiency for severe conditions. When applicable, WIX flexible silicone anti-drainback valve protects against dry engine starts past the traditional filter change interval. Laboratory Test Performance per ISO 454812 18 grams dirt (WIX 51515), 99% efficient at 23 microns (Based on WIX 51515, WIX 51356, WIX 57060)
This Part Fits the Following OEM/Substitute Numbers:
0 451 001 181, 0 451 103 089, 0 451 103 106, 0 451 103 224, 0 451 105 191, 0 986 452 006, 0 986 452 016, 0 986 452 916, 0000230370, 00013505381, 0324-14300, 041-8086, 0410571, 0410639, 0410724, 0410736, 0410738, 0410784...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Region | Engine | CID |
|---|---|---|---|---|---|
| 1985 - Isuzu I-Mark | L | 1817 | Canada | 4 Cyl 1.8L | - |
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1985 - Isuzu I-Mark | L | 1817 | 4 Cyl 1.8L | - |
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID | Prod. Date Range |
|---|---|---|---|---|---|
| 1985 - Isuzu I-Mark | L | 1471 | 4 Cyl 1.5L | - | Fr:02-00-85 |
Showing 1 - 10 of 18 products
Loading...