1991 Buick Commercial Chassis Engine Oil Filter Parts
Choose your Engine for your 1991 Buick Commercial Chassis
Image
Product
Price
- FRAM, PH30, Oil Filter
- Spin-on Oil Filter
- Extra Guard
- Product Attributes:
- Gasket Inside Diameter: 2.130
- Non Slip Grip: Yes
- Gasket Thickness: 0.205
- Micron Rating: 8.000
- Torque Nut: No
- Burst Pressure: 230.000
- Gasket Material: Base
- Gasket Type: Base
- Inside Thread Diameter: 13/16-16
- Marine Approved: No
- Outside Diameter: 3.781
- Gasket Outside Diameter: 2.758
- Bypass Relief Valve: No
- Filter Media Material: Cellulose/synthetic Blend
- Anti-Drain Back Valve: No
- FRAM Extra Guard® Oil Filters with SureGrip® deliver advanced engine protection for everyday drivers who perform routine oil changes at OE recommended intervals. Extra Guard is engineered for extended performance that meets all manufacturers’ recommended change intervals. No matter what you drive, or what motor oil you use, FRAM® has a filter for you.
This Part Fits the Following OEM/Substitute Numbers:
10-82200, 21-8065, 672, EAO20, LF127, LF146, PL-AC12B
Additional Fitment Information:
| Vehicle |
|---|
| 1991 - Buick Commercial Chassis |
- WIX Spin-On Lube Filter
- Also Available In Master Pack Version; Manufacturer OE Recommended Oil Change Intervals
- Product Attributes:
- California Proposition 65: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Inner Diameter Top: Closed
- Outer Diameter Top: 3.66
- Duty Type: Ld
- Micron: 21.00
- Flow Rate: 9-11 Gpm
- Style: Spin-on Lube Filter
- Class: A
- Burst Pressure: 225
- BetaRatio: 2/20=6/20
- Bypass Relief Valve Setting: None
- Media Material: Enhanced Cellulose
- Anti-Drain Back Valve: No
- WIX Oil Filters provide excellent engine protection using conventional, synthetic, or synthetic-blended motor oils, as recommended by the OE vehicle manufacturer, for normal and severe driving conditions such as stop and go traffic, dirt roads, construction sites, short trips, and interstate travel. WIX filters are recommended for OEM oil and filter change intervals, typically 3,750 to 10,000 miles, not to exceed 12 months. This filter traps up to 50% more dirt and contaminants than Protec with the best combination of capacity & efficiency for severe conditions. When applicable, WIX flexible silicone anti-drainback valve protects against dry engine starts past the traditional filter change interval. Laboratory Test Performance per ISO 454812 18 grams dirt (WIX 51515), 99% efficient at 23 microns (Based on WIX 51515, WIX 51356, WIX 57060)
This Part Fits the Following OEM/Substitute Numbers:
0 451 104 064, 00013505069, 027092218, 055505, 068108746, 0FE00134, 102, 1025280M91, 106, 1069, 1146873-3, 11468736, 127644, 130, 13505069, 146393M1, 15601U212071, 1717358...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Region | Engine | CID |
|---|---|---|---|---|---|
| 1991 - Buick Commercial Chassis | V | - | Canada | 8 Cyl 5.0L | 305 |
- FRAM, HP8, Oil Filter
- FRAM HIGH PERFORMANCE High Performance Spin-on Oil Filter
- Product Attributes:
- Gasket Inside Diameter: 2.470
- Non Slip Grip: No
- Gasket Thickness: 0.188
- Torque Nut: No
- Burst Pressure: 350.000
- Gasket Material: Base
- Gasket Type: Base
- Housing Color: Orange
- Inside Thread Diameter: 13/16-16
- Bypass Relief Valve Setting: 22.000
- Marine Approved: No
- Outside Diameter: 3.688
- Gasket Outside Diameter: 2.844
- Bypass Relief Valve: Yes
- Filter Media Material: Cellulose/synthetic Blend
- Anti-Drain Back Valve: Yes
- FRAM Racing® Oil Filters are optimized for both racing and high performance street cars, and are compatible with all oil types. These filters deliver performance-enhancing features to support operating high-performance vehicles with engines put under tremendous pressure. FRAM Racing Oil Filters are compatible with all oil types.
This Part Fits the Following OEM/Substitute Numbers:
12321, 18502, B255, DF5888, HF729, IF-16-1-15, PF924
Additional Fitment Information:
| Vehicle |
|---|
| 1991 - Buick Commercial Chassis |
Showing 1 - 3 of 3 products
Loading...