Image
Product
Price
- FRAM, PH2870A, Oil Filter
- Spin-on Oil Filter
- Extra Guard
- Product Attributes:
- Gasket Inside Diameter: 2.210
- Non Slip Grip: Yes
- Gasket Thickness: 0.205
- Micron Rating: 8.000
- Torque Nut: No
- Burst Pressure: 310.000
- Gasket Material: Nitrile Rubber
- Housing Color: Orange
- Inside Thread Diameter: 3/4-16
- Bypass Relief Valve Setting: 22.000
- Marine Approved: No
- Outside Diameter: 2.984
- Gasket Outside Diameter: 2.480
- Bypass Relief Valve: Yes
- Filter Media Material: Cellulose/synthetic Blend
- Anti-Drain Back Valve: Yes
- FRAM Extra Guard® Oil Filters with SureGrip® deliver advanced engine protection for everyday drivers who perform routine oil changes at OE recommended intervals. Extra Guard is engineered for extended performance that meets all manufacturers’ recommended change intervals. No matter what you drive, or what motor oil you use, FRAM® has a filter for you.
This Part Fits the Following OEM/Substitute Numbers:
21394MP, 51792XE, 61394BP, CN-10, L20014
Additional Fitment Information:
| Vehicle |
|---|
| 1996 - Audi S6 |
- PRO-TEC Spin-On Lube Filter
- Oil Drain Intervals of up to 5000 miles
- Product Attributes:
- California Proposition 65: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Inner Diameter Top: Closed
- Outer Diameter Top: 3.02
- Duty Type: Ld
- Micron: 21.00
- Flow Rate: 7-9 Gpm
- Style: Spin-on Lube Filter
- Class: A
- Burst Pressure: 410
- BetaRatio: 2/20=6/20
- Bypass Relief Valve Setting: 30
- Media Material: Enhanced Cellulose
- Anti-Drain Back Valve: Yes
- Protec Oil Filters provide good engine protection using conventional motor oil for everyday normal driving conditions such as city and highway travel. Recommended for traditional oil and filter change intervals, typically 3,000 to 5,000 miles. Laboratory Test Performance per ISO 454812 13 grams dirt (Protec 101), 95% efficient at 29 microns (Based on Protec 164, 115, 101)
This Part Fits the Following OEM/Substitute Numbers:
1393, 181, 21393, 21393MP, 31393, 500101509, 51393, 51393XP, 61393, 61393BP, 618-51393, 618-51393MP, 8-51393, 84301, 85393, B0252, B0252MP, CF134...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Region | Engine | Aspiration | CID |
|---|---|---|---|---|---|---|
| 1996 - Audi S6 | L | 2226 | Canada | 5 Cyl 2.2L | Turbocharged | - |
- PRO-TEC Spin-On Lube Filter
- Master Pack Version; Oil Drain Intervals of up to 5000 miles
- Product Attributes:
- Inner Diameter Top: Closed
- Outer Diameter Top: 3.02
- Capacity: 0.00
- Burst Pressure: 410
- Duty Type: Ld
- Bypass Relief Valve Setting: 30
- Flow Rate: 7-9 Gpm
- Style: Spin-on Lube Filter
- Media Material: Synthetic
- Class: D
- Anti-Drain Back Valve: Yes
- Protec Oil Filters provide good engine protection using conventional motor oil for everyday normal driving conditions such as city and highway travel. Recommended for traditional oil and filter change intervals, typically 3,000 to 5,000 miles. Laboratory Test Performance per ISO 454812 13 grams dirt (Protec 101), 95% efficient at 29 microns (Based on Protec 164, 115, 101)
- This item must be purchased in quantities of 12
This Part Fits the Following OEM/Substitute Numbers:
1393, 181, 21393, 21393MP, 31393, 500101509, 51393, 51393XP, 61393, 61393BP, 618-51393, 618-51393MP, 8-51393, 84301, 85393, B0252, B0252MP, CF134...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Region | Engine | Aspiration | CID |
|---|---|---|---|---|---|---|
| 1996 - Audi S6 | L | 2226 | Canada | 5 Cyl 2.2L | Turbocharged | - |
- Oil Filter
- H-5.063 in.; OD-3 in.; 3/4 In. - 16 Thread; psi Relief Valve 11-14
- K/N Wrench-Off oil filters are engineered to help ensure high flow rates and exceptional protection from contaminants. Each filter comes with a hex nut welded to the top of the canister; allowing for easy removal with a standard wrench.
- Performance Gold Oil Filter
- Product Attributes:
- Thread Size: .750 In. - 16
- Removal Nut Size: 1.000 In.
- WARNING CA Proposition 65: No
- Bypass Valve: Yes
- Style: Canister
- Item Weight: 1.000 Lbs. (0.4 Kg)
- Product Box Height: 5.630 In. (143mm)
- Filter Material: High Flow Premium Media
- Gasket Material: Viton Rubber
- Product Box Width: 3.250 In. (83mm)
- Package Material: Paperboard
- Product Box Length: 3.250 In. (83mm)
- PSI Relief Valve: 11-14
- Outside Diameter: 3.000 In. (76mm)
- Removal Nut: Yes
- Item Height: 5.063 In. (129mm)
- Package Type: Box
- Anti-Drain Back Valve: Yes
-
Features:
- OE Replacement Oil Filter
- 1 in. Exposed Nut Designed For Easy Oil Filter Removal
- Heavy Duty Construction For Extreme Conditions
- Anti-Drain Back Valve - Where Applicable - Eliminates Dry Starts
- K&N premium oil filters are meticulously engineered to offer outstanding filtration and engine protection. Designed to operate with all synthetic, conventional, and blended motor oils, K&N's pleated synthetic-blend filtration media helps to shield your engine from contaminants and ensure a consistent flow of oil. The heavy-duty canister is engineered to be exceptionally durable, and a one-inch welded hex nut can be used for quick and easy filter removal. Each filter is specifically designed to withstand the service intervals recommended by vehicle manufacturers, and is protected by the K&N 1-Year Limited Warranty.
This Part Fits the Following OEM/Substitute Numbers:
1113566, 1220323, 1220445, 1220469, 1220800, 122A323, 122B323, 276217536, 276513, 277233, 4209146, 42532250, 47352, 480704, 507107, 507631, 51516, 51762...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1996 - Audi S6 | L | 2226 | 5 Cyl 2.2L | - |
- WIX Spin-On Lube Filter
- Manufacturer OE Recommended Oil Change Intervals
- Product Attributes:
- California Proposition 65: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Inner Diameter Top: Closed
- Outer Diameter Top: 3.02
- Duty Type: Ld
- Micron: 21.00
- Flow Rate: 7-9 Gpm
- Style: Spin-on Lube Filter
- Class: A
- Burst Pressure: 410
- BetaRatio: 2/20=6/20
- Bypass Relief Valve Setting: 30
- Media Material: Enhanced Cellulose
- Anti-Drain Back Valve: Yes
- WIX Oil Filters provide excellent engine protection using conventional, synthetic, or synthetic-blended motor oils, as recommended by the OE vehicle manufacturer, for normal and severe driving conditions such as stop and go traffic, dirt roads, construction sites, short trips, and interstate travel. WIX filters are recommended for OEM oil and filter change intervals, typically 3,750 to 10,000 miles, not to exceed 12 months. This filter traps up to 50% more dirt and contaminants than Protec with the best combination of capacity & efficiency for severe conditions. When applicable, WIX flexible silicone anti-drainback valve protects against dry engine starts past the traditional filter change interval. Laboratory Test Performance per ISO 454812 18 grams dirt (WIX 51515), 99% efficient at 23 microns (Based on WIX 51515, WIX 51356, WIX 57060)
This Part Fits the Following OEM/Substitute Numbers:
0 451 103 070, 0 451 103 225, 0 451 103 302, 0 451 103 302-85N, 0 451 103 314, 0 451 103 344, 0 451 103 369, 0 451 103 524, 0 451 104 502, 0 986 AF1 139, 0 986 B00 004, 041-8174, 06A 115 561, 06A 115 561 B, 06A 115 561 E, 078 115 561 K, 0FE00376, 1 451 103 524...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Region | Engine | Aspiration | CID |
|---|---|---|---|---|---|---|
| 1996 - Audi S6 | L | 2226 | Canada | 5 Cyl 2.2L | Turbocharged | - |
- This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
- Spin-On
Additional Fitment Information:
| Vehicle |
|---|
| 1996 - Audi S6 |
Additional Fitment Information:
| Vehicle |
|---|
| 1996 - Audi S6 |
- This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
- Spin-On
Additional Fitment Information:
| Vehicle |
|---|
| 1996 - Audi S6 |
- Oil Filter
- H-5.063 in.; OD-3.0 in.; 3/4 in. - 16 Thread; psi Relief Valve 11-17 Premium Oil Filter w/Wrench Off Nut
- K/N Wrench-Off oil filters are engineered to help ensure high flow rates and exceptional protection from contaminants. Each filter comes with a hex nut welded to the top of the canister; allowing for easy removal with a standard wrench.
- Performance Gold Oil Filter
- Product Attributes:
- Thread Size: .750 In. - 16
- Removal Nut Size: 1.000 In.
- WARNING CA Proposition 65: No
- Bypass Valve: Yes
- Style: Canister
- Item Weight: 1.000 Lbs. (0.4 Kg)
- Product Box Height: 5.750 In. (146mm)
- Filter Material: High Flow Premium Media
- Gasket Material: Viton Rubber
- Product Box Width: 3.190 In. (81mm)
- Package Material: Paperboard
- Product Box Length: 3.190 In. (81mm)
- PSI Relief Valve: 11-17
- Outside Diameter: 3.000 In. (76mm)
- Removal Nut: Yes
- Item Height: 5.063 In. (129mm)
- Package Type: Box
- Anti-Drain Back Valve: Yes
-
Features:
- OE Replacement Oil Filter
- 1 in. Exposed Nut Designed For Easy Oil Filter Removal
- Heavy Duty Construction For Extreme Conditions
- Anti-Drain Back Valve - Where Applicable - Eliminates Dry Starts
- K&N premium oil filters are meticulously engineered to offer outstanding filtration and engine protection. Designed to operate with all synthetic, conventional, and blended motor oils, K&N's pleated synthetic-blend filtration media helps to shield your engine from contaminants and ensure a consistent flow of oil. The heavy-duty canister is engineered to be exceptionally durable, and a one-inch welded hex nut can be used for quick and easy filter removal. Each filter is specifically designed to withstand the service intervals recommended by vehicle manufacturers, and is protected by the K&N 1-Year Limited Warranty.
This Part Fits the Following OEM/Substitute Numbers:
056115561B, 056115561G, 06A115561B, 1062099C1, 11421266773, 1164626, 1172346, 1174417, 1220764, 140516010, 1520813201, 152099J1800, 15209J1800, 1521332090, 1521332091, 1526187, 1526188, 1560033010...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1996 - Audi S6 | L | 2226 | 5 Cyl 2.2L | - |
- Oil Filter
- H-5.063 in.; OD-3 in.; 3/4 In. - 16 Thread; psi Relief Valve 11-17 Pro-Series Oil Filter w/o Wrench Off Nut
- K/N Performance Silver Oil Filters have been specially designed for professional installers. Their high flow design can help to improve engine performance by reducing oil filter restriction while they provide outstanding filtration.
- High Flow Oil Filter
- Product Attributes:
- Thread Size: .750 In. - 16
- WARNING CA Proposition 65: No
- Bypass Valve: Yes
- Style: Canister
- Item Weight: 0.900 Lbs. (0.4 Kg)
- Product Box Height: 4.700 In. (119mm)
- Filter Material: High Flow Premium Media
- Gasket Material: Nitrile Rubber
- Product Box Width: 3.200 In. (81 Mm)
- Package Material: Paperboard
- Product Box Length: 3.300 In. (84mm)
- PSI Relief Valve: 11-17
- Outside Diameter: 3.000 In. (76mm)
- Removal Nut: No
- Item Height: 5.063 In. (129mm)
- Package Type: Box
- Anti-Drain Back Valve: Yes
-
Features:
- Designed To Improve Performance
- Designed For Synthetic/Conventional/Blended Oils
- Premium Filtration Media For Increased Capacity
- Helps Improve Engine Performance by Reducing Oil Restriction
- K&N Performance Silver Oil Filters have been specially designed for professional installers and service providers. Their high flow design can help to improve engine performance by reducing oil filter restriction. Our Performance Silver Oil Filters have a fluted canister shape so they can be removed with a traditional oil filter wrench commonly available to commercial installers. These Performance Silver oil filters provide outstanding filtration and engine protection throughout their service life. They are engineered to handle all grades of synthetic, conventional and blended motor oils. The pleated media provides high capacity making them suitable for extended oil change intervals when used in accordance with the vehicle and motor oil manufacturers recommendation. K&N Performance Silver Oil Filters are available for canister and cartridge type oil filter applications.
This Part Fits the Following OEM/Substitute Numbers:
06A115561B, 51088, 51342, FL227, FL401, HP2005, L20064, L20252, L24466, L27190, L27252, L30042, M1205, PF2124, PF5561A, PF60, PH2825, PH2870A...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1996 - Audi S6 | L | 2226 | 5 Cyl 2.2L | - |
Showing 1 - 10 of 12 products
Loading...