2000 Ford F 100 Ranger Engine Oil Filter Parts
Choose your Engine for your 2000 Ford F-100 Ranger
Image
Product
Price
- PRO-TEC Spin-On Lube Filter
- Master Pack Version; Oil Drain Intervals of up to 5000 miles
- Product Attributes:
- California Proposition 65: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Inner Diameter Top: Closed
- Outer Diameter Top: 2.921
- Burst Pressure: 275
- Duty Type: Ld
- Micron: 21.00
- BetaRatio: 2/20=6/20
- Bypass Relief Valve Setting: 8-11
- Flow Rate: 7-9 Gpm
- Media Material: Enhanced Cellulose
- Class: B
- Protec Oil Filters provide good engine protection using conventional motor oil for everyday normal driving conditions such as city and highway travel. Recommended for traditional oil and filter change intervals, typically 3,000 to 5,000 miles. Laboratory Test Performance per ISO 454812 13 grams dirt (Protec 101), 95% efficient at 29 microns (Based on Protec 164, 115, 101)
- This item must be purchased in quantities of 12
This Part Fits the Following OEM/Substitute Numbers:
116, 134, 1516, 1516MP, 1718818, 21516, 21516MP, 2224520, 31516, 42064, 5001200188, 51516, 51516MP, 51516XP, 61516, 61516BP, 618-51516, 618-51516MP...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Region | Engine | CID |
|---|---|---|---|---|---|
| 2000 - Ford F-100 Ranger | V | 2986 | Mexico | 6 Cyl 3.0L | 182 |
- PRO-TEC Spin-On Lube Filter
- Oil Drain Intervals of up to 5000 miles
- Product Attributes:
- California Proposition 65: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Inner Diameter Top: Closed
- Outer Diameter Top: 2.921
- Burst Pressure: 275
- Duty Type: Ld
- Micron: 21.00
- BetaRatio: 2/20=6/20
- Bypass Relief Valve Setting: 8-11
- Flow Rate: 7-9 Gpm
- Media Material: Enhanced Cellulose
- Class: A
- Protec Oil Filters provide good engine protection using conventional motor oil for everyday normal driving conditions such as city and highway travel. Recommended for traditional oil and filter change intervals, typically 3,000 to 5,000 miles. Laboratory Test Performance per ISO 454812 13 grams dirt (Protec 101), 95% efficient at 29 microns (Based on Protec 164, 115, 101)
This Part Fits the Following OEM/Substitute Numbers:
116, 134, 1516, 1718818, 21516, 2224520, 31516, 42064, 5001200188, 51516, 51516XP, 61516, 61516BP, 618-51516, 8-51516, 85516, 85516HD, AA3600...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Region | Engine | CID |
|---|---|---|---|---|---|
| 2000 - Ford F-100 Ranger | V | 2986 | Mexico | 6 Cyl 3.0L | 182 |
- PRO-TEC Spin-On Lube Filter
- Factory filled synthetic oil - WIX XP or WIX Premium; Oil Drain Intervals of up to 5000 miles
- Product Attributes:
- California Proposition 65: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Inner Diameter Top: Closed
- Outer Diameter Top: 2.921
- Burst Pressure: 275
- Duty Type: Ld
- Micron: 21.00
- BetaRatio: 2/20=6/20
- Bypass Relief Valve Setting: 8-11
- Flow Rate: 7-9 Gpm
- Media Material: Enhanced Cellulose
- Class: A
- Protec Oil Filters provide good engine protection using conventional motor oil for everyday normal driving conditions such as city and highway travel. Recommended for traditional oil and filter change intervals, typically 3,000 to 5,000 miles. Laboratory Test Performance per ISO 454812 13 grams dirt (Protec 101), 95% efficient at 29 microns (Based on Protec 164, 115, 101)
Additional Fitment Information:
| Vehicle | Block | CC | Region | Engine | CID |
|---|---|---|---|---|---|
| 2000 - Ford F-100 Ranger | L | - | Mexico | 4 Cyl 2.5L | 153 |
- PRO-TEC Spin-On Lube Filter
- Factory filled synthetic oil - WIX XP or WIX Premium Master Pack Version ; Oil Drain Intervals of up to 5000 miles
- Product Attributes:
- California Proposition 65: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Inner Diameter Top: Closed
- Outer Diameter Top: 2.921
- Burst Pressure: 275
- Duty Type: Ld
- Micron: 21.00
- BetaRatio: 2/20=6/20
- Bypass Relief Valve Setting: 8-11
- Flow Rate: 7-9 Gpm
- Media Material: Enhanced Cellulose
- Class: B
- Protec Oil Filters provide good engine protection using conventional motor oil for everyday normal driving conditions such as city and highway travel. Recommended for traditional oil and filter change intervals, typically 3,000 to 5,000 miles. Laboratory Test Performance per ISO 454812 13 grams dirt (Protec 101), 95% efficient at 29 microns (Based on Protec 164, 115, 101)
- This item must be purchased in quantities of 12
Additional Fitment Information:
| Vehicle | Block | CC | Region | Engine | CID |
|---|---|---|---|---|---|
| 2000 - Ford F-100 Ranger | L | - | Mexico | 4 Cyl 2.5L | 153 |
- WIX Spin-On Lube Filter
- Also Available In Master Pack Version Factory filled synthetic oil - WIX XP or WIX Premium ; Manufacturer OE Recommended Oil Change Intervals
- Product Attributes:
- California Proposition 65: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Inner Diameter Top: Closed
- Outer Diameter Top: 2.921
- Burst Pressure: 275
- Duty Type: Ld
- Micron: 21.00
- BetaRatio: 2/20=6/20
- Bypass Relief Valve Setting: 8-11
- Flow Rate: 7-9 Gpm
- Media Material: Enhanced Cellulose
- Class: A
- WIX Oil Filters provide excellent engine protection using conventional, synthetic, or synthetic-blended motor oils, as recommended by the OE vehicle manufacturer, for normal and severe driving conditions such as stop and go traffic, dirt roads, construction sites, short trips, and interstate travel. WIX filters are recommended for OEM oil and filter change intervals, typically 3,750 to 10,000 miles, not to exceed 12 months. This filter traps up to 50% more dirt and contaminants than Protec with the best combination of capacity & efficiency for severe conditions. When applicable, WIX flexible silicone anti-drainback valve protects against dry engine starts past the traditional filter change interval. Laboratory Test Performance per ISO 454812 18 grams dirt (WIX 51515), 99% efficient at 23 microns (Based on WIX 51515, WIX 51356, WIX 57060)
Additional Fitment Information:
| Vehicle | Block | CC | Region | Engine | CID |
|---|---|---|---|---|---|
| 2000 - Ford F-100 Ranger | L | - | Mexico | 4 Cyl 2.5L | 153 |
- WIX Spin-On Lube Filter
- Also Available In Master Pack Version; Manufacturer OE Recommended Oil Change Intervals
- Product Attributes:
- California Proposition 65: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Inner Diameter Top: Closed
- Outer Diameter Top: 2.921
- Burst Pressure: 275
- Duty Type: Ld
- Micron: 21.00
- BetaRatio: 2/20=6/20
- Bypass Relief Valve Setting: 8-11
- Flow Rate: 7-9 Gpm
- Media Material: Enhanced Cellulose
- Class: A
- WIX Oil Filters provide excellent engine protection using conventional, synthetic, or synthetic-blended motor oils, as recommended by the OE vehicle manufacturer, for normal and severe driving conditions such as stop and go traffic, dirt roads, construction sites, short trips, and interstate travel. WIX filters are recommended for OEM oil and filter change intervals, typically 3,750 to 10,000 miles, not to exceed 12 months. This filter traps up to 50% more dirt and contaminants than Protec with the best combination of capacity & efficiency for severe conditions. When applicable, WIX flexible silicone anti-drainback valve protects against dry engine starts past the traditional filter change interval. Laboratory Test Performance per ISO 454812 18 grams dirt (WIX 51515), 99% efficient at 23 microns (Based on WIX 51515, WIX 51356, WIX 57060)
This Part Fits the Following OEM/Substitute Numbers:
0 451 103 237, 0 451 103 360, 0 986 AF0 053, 0 986 AF1 143, 000 983 0626, 000.14.128, 00013505764, 0009830626V, 0117 4484, 0418095, 0418996, 044693, 04781452AA, 04781452BB, 05003558AA, 05003558AB, 05191944AA, 0649015...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Region | Engine | CID |
|---|---|---|---|---|---|
| 2000 - Ford F-100 Ranger | V | 2986 | Mexico | 6 Cyl 3.0L | 182 |
- Oil Filter
- H-5.063 in.; OD-3 in.; 3/4 In. - 16 Thread; psi Relief Valve 11-14
- K/N Wrench-Off oil filters are engineered to help ensure high flow rates and exceptional protection from contaminants. Each filter comes with a hex nut welded to the top of the canister; allowing for easy removal with a standard wrench.
- Performance Gold Oil Filter
- Product Attributes:
- Removal Nut Size: 1.000 In.
- WARNING CA Proposition 65: No
- Bypass Valve: Yes
- Item Weight: 1.000 Lbs. (0.4 Kg)
- Product Box Height: 5.630 In. (143mm)
- Filter Material: High Flow Premium Media
- Gasket Material: Viton Rubber
- Product Box Width: 3.250 In. (83mm)
- Package Material: Paperboard
- Product Box Length: 3.250 In. (83mm)
- PSI Relief Valve: 11-14
- Removal Nut: Yes
- Item Height: 5.063 In. (129mm)
- Package Type: Box
- Anti-Drain Back Valve: Yes
-
Features:
- OE Replacement Oil Filter
- 1 in. Exposed Nut Designed For Easy Oil Filter Removal
- Heavy Duty Construction For Extreme Conditions
- Anti-Drain Back Valve - Where Applicable - Eliminates Dry Starts
- K&N premium oil filters are meticulously engineered to offer outstanding filtration and engine protection. Designed to operate with all synthetic, conventional, and blended motor oils, K&N's pleated synthetic-blend filtration media helps to shield your engine from contaminants and ensure a consistent flow of oil. The heavy-duty canister is engineered to be exceptionally durable, and a one-inch welded hex nut can be used for quick and easy filter removal. Each filter is specifically designed to withstand the service intervals recommended by vehicle manufacturers, and is protected by the K&N 1-Year Limited Warranty.
This Part Fits the Following OEM/Substitute Numbers:
1113566, 1220323, 1220445, 1220469, 1220800, 122A323, 122B323, 276217536, 276513, 277233, 4209146, 42532250, 47352, 480704, 507107, 507631, 51516, 51762...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Fuel Type | Engine | Fuel Delivery Type | Engine VIN | Aspiration | CID |
|---|---|---|---|---|---|---|---|---|
| 2000 - Ford F-100 Ranger | V | 2986 | GAS | 6 Cyl 3.0L | FI | U | Naturally Aspirated | 182 |
- Oil Filter; Spin-On
- High Flow Premium Media; H-4.438 in.; OD-2.969 in.; psi Relief Valve 18-24
- K/N Select Oil Filters have been specially designed for professional installers. Their high flow design can help to improve engine performance by reducing oil filter restriction while they provide outstanding filtration.
- Oil Filter
- Product Attributes:
- WARNING CA Proposition 65: No
-
Features:
- High Performance Design for Outstanding Filtration
- High-Efficiency Media with Uniform Pleats
- Allows for High Oil Flow Rates
- Ideal for High-End Synthetic Motor Oil
- K&N Select Oil Filters have been specially designed for professional installers and service providers. Their high flow design can help to improve engine performance by reducing oil filter restriction. Our Select Oil Filters have a fluted canister shape so they can be removed with a traditional oil filter wrench commonly available to commercial installers. These Select Oil Filters provide outstanding filtration and engine protection throughout their service life. They are engineered to handle all grades of synthetic, conventional and blended motor oils. The pleated media provides high capacity making them suitable for extended oil change intervals when used in accordance with the vehicle and motor oil manufacturers recommendation. K&N Select Oil Filters are available for canister and cartridge type oil filter applications.
Additional Fitment Information:
| Vehicle | Block | CC | Fuel Type | Engine | Fuel Delivery Type | Engine VIN | Aspiration | CID |
|---|---|---|---|---|---|---|---|---|
| 2000 - Ford F-100 Ranger | V | 2986 | GAS | 6 Cyl 3.0L | FI | U | Naturally Aspirated | 182 |
Showing 1 - 8 of 8 products
Loading...