2000 GMC K3500 Engine Oil Filter Parts

Choose your Engine for your 2000 GMC K3500


Showing 1 - 10 of 27 products
Image
SKU
Product
Rating
Price

K&N
  • Oil Filter
  • H-5.875 in.; OD-3.688 in.; 13/16 In. - 16 Thread; psi Relief Valve 11-17
  • K/N Wrench-Off oil filters are engineered to help ensure high flow rates and exceptional protection from contaminants. Each filter comes with a hex nut welded to the top of the canister; allowing for easy removal with a standard wrench.
  • Performance Gold Oil Filter
  • Product Attributes:
    • Thread Size: 0.8125 In. - 16
    • Removal Nut Size: 1.000 In.
    • WARNING CA Proposition 65: No
    • Bypass Valve: Yes
    • Style: Canister
    • Item Weight: 1.300 Lbs. (0.6 Kg)
    • Product Box Height: 6.130 In. (156mm)
    • Filter Material: High Flow Premium Media
    • Inside Diameter: 0.8125 In.
    • Gasket Material: Viton Rubber
    • Product Box Width: 3.880 In. (98mm)
    • Package Material: Paperboard
    • Product Box Length: 3.880 In. (98mm)
    • PSI Relief Valve: 11-17
    • Outside Diameter: 3.688 In. (94mm)
    • Removal Nut: Yes
    • Item Height: 5.875 In. (149mm)
    • Package Type: Box
    • Anti-Drain Back Valve: Yes
  • Features:
    • OE Replacement Oil Filter
    • 1 in. Exposed Nut Designed For Easy Oil Filter Removal
    • Heavy Duty Construction For Extreme Conditions
    • Anti-Drain Back Valve - Where Applicable - Eliminates Dry Starts
  • K&N premium oil filters are meticulously engineered to offer outstanding filtration and engine protection. Designed to operate with all synthetic, conventional, and blended motor oils, K&N's pleated synthetic-blend filtration media helps to shield your engine from contaminants and ensure a consistent flow of oil. The heavy-duty canister is engineered to be exceptionally durable, and a one-inch welded hex nut can be used for quick and easy filter removal. Each filter is specifically designed to withstand the service intervals recommended by vehicle manufacturers, and is protected by the K&N 1-Year Limited Warranty.

This Part Fits the Following OEM/Substitute Numbers:
11E170110, 13284716, 14503447, 151831111, 161625, 191116, 1992368B, 35374651, 3780204, 3890712, 3903224, 3908616, 3934429, 4378318, 474730, 51060, 51060R, 51061...VIEW MORE

Additional Fitment Information:
Vehicle Block CC Engine CID
2000 - GMC K3500 V - 8 Cyl 6.5L 395

K&N
  • Oil Filter
  • H-4.6 in.; OD-3.77 in.; 13/16 In. - 16 UNS Thread; w/o psi Relief Valve
  • K/N Wrench-Off oil filters are engineered to help ensure high flow rates and exceptional protection from contaminants. Each filter comes with a hex nut welded to the top of the canister; allowing for easy removal with a standard wrench.
  • Performance Gold Oil Filter
  • Product Attributes:
    • Thread Size: 0.8125 In. - 16 Uns
    • Removal Nut Size: 1.000 In.
    • WARNING CA Proposition 65: No
    • Bypass Valve: No
    • Style: Canister
    • Item Weight: 1.300 Lbs. (0.6 Kg)
    • Product Box Height: 5.000 In. (127mm)
    • Filter Material: High Flow Premium Media
    • Gasket Material: Viton Rubber
    • Product Box Width: 3.880 In. (98mm)
    • Package Material: Paperboard
    • Product Box Length: 3.900 In. (99mm)
    • PSI Relief Valve: No
    • Outside Diameter: 3.688 In. (94mm)
    • Removal Nut: Yes
    • Item Height: 4.688 In. (119mm)
    • Package Type: Box
    • Anti-Drain Back Valve: No
  • Features:
    • OE Replacement Oil Filter
    • 1 in. Exposed Nut Designed For Easy Oil Filter Removal
    • Heavy Duty Construction For Extreme Conditions
    • Anti-Drain Back Valve - Where Applicable - Eliminates Dry Starts
  • K&N premium oil filters are meticulously engineered to offer outstanding filtration and engine protection. Designed to operate with all synthetic, conventional, and blended motor oils, K&N's pleated synthetic-blend filtration media helps to shield your engine from contaminants and ensure a consistent flow of oil. The heavy-duty canister is engineered to be exceptionally durable, and a one-inch welded hex nut can be used for quick and easy filter removal. Each filter is specifically designed to withstand the service intervals recommended by vehicle manufacturers, and is protected by the K&N 1-Year Limited Warranty.

This Part Fits the Following OEM/Substitute Numbers:
1025280M91, 127644, 168108746, 173232, 173233, 196581, 197273, 201104, 25324052, 3280V3040, 3280V5040, 502902, 51069, 51069R, 5578108, 6438261, 81501001, 905000...VIEW MORE

Additional Fitment Information:
Vehicle Block CC Engine CID
2000 - GMC K3500 V - 8 Cyl 7.4L 454

K&N
  • Oil Filter
  • H-5.094 in.; OD-3 in.; M18x1.5 Thread; w/o psi Relief Valve Premium Oil Filter w/Wrench Off Nut
  • K/N Wrench-Off oil filters are engineered to help ensure high flow rates and exceptional protection from contaminants. Each filter comes with a hex nut welded to the top of the canister; allowing for easy removal with a standard wrench.
  • Performance Gold Oil Filter
  • Product Attributes:
    • Thread Size: M18 X 1.5
    • Removal Nut Size: 1.000 In.
    • WARNING CA Proposition 65: No
    • Bypass Valve: No
    • Style: Canister
    • Item Weight: 0.900 Lbs. (0.4 Kg)
    • Product Box Height: 5.750 In. (146mm)
    • Filter Material: High Flow Premium Media
    • Gasket Material: Viton Rubber
    • Product Box Width: 3.130 In. (79 Mm)
    • Package Material: Paperboard
    • Product Box Length: 3.130 In. (79mm)
    • PSI Relief Valve: No
    • Outside Diameter: 3.000 In. (76mm)
    • Removal Nut: Yes
    • Item Height: 5.094 In. (129mm)
    • Package Type: Box
    • Anti-Drain Back Valve: Yes
  • Features:
    • OE Replacement Oil Filter
    • 1 in. Exposed Nut Designed For Easy Oil Filter Removal
    • Heavy Duty Construction For Extreme Conditions
    • Anti-Drain Back Valve - Where Applicable - Eliminates Dry Starts
  • K&N premium oil filters are meticulously engineered to offer outstanding filtration and engine protection. Designed to operate with all synthetic, conventional, and blended motor oils, K&N's pleated synthetic-blend filtration media helps to shield your engine from contaminants and ensure a consistent flow of oil. The heavy-duty canister is engineered to be exceptionally durable, and a one-inch welded hex nut can be used for quick and easy filter removal. Each filter is specifically designed to withstand the service intervals recommended by vehicle manufacturers, and is protected by the K&N 1-Year Limited Warranty.

This Part Fits the Following OEM/Substitute Numbers:
1320000, 173834, 502903, 51036, 51190, 74184H, 9042000460, A37970001, FL402, HP11, L20173, L24011, M1201, M1201A, PF51, PF52, PH3980, PH5...VIEW MORE

Additional Fitment Information:
Vehicle Block CC Engine CID
2000 - GMC K3500 V - 8 Cyl 5.7L 350

Wix
  • WIX Spin-On Lube Filter
  • Also Available In Master Pack Version; Manufacturer OE Recommended Oil Change Intervals
  • Product Attributes:
    • California Proposition 65: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
    • Inner Diameter Top: Closed
    • Outer Diameter Top: 3.66
    • Duty Type: Ld
    • Micron: 21.00
    • Flow Rate: 9-11 Gpm
    • Style: Spin-on Lube Filter
    • Class: A
    • Burst Pressure: 270
    • BetaRatio: 2/20=6/20
    • Bypass Relief Valve Setting: None
    • Media Material: Enhanced Cellulose
    • Anti-Drain Back Valve: Yes
  • WIX Oil Filters provide excellent engine protection using conventional, synthetic, or synthetic-blended motor oils, as recommended by the OE vehicle manufacturer, for normal and severe driving conditions such as stop and go traffic, dirt roads, construction sites, short trips, and interstate travel. WIX filters are recommended for OEM oil and filter change intervals, typically 3,750 to 10,000 miles, not to exceed 12 months. This filter traps up to 50% more dirt and contaminants than Protec with the best combination of capacity & efficiency for severe conditions. When applicable, WIX flexible silicone anti-drainback valve protects against dry engine starts past the traditional filter change interval. Laboratory Test Performance per ISO 454812 18 grams dirt (WIX 51515), 99% efficient at 23 microns (Based on WIX 51515, WIX 51356, WIX 57060)

This Part Fits the Following OEM/Substitute Numbers:
05715388, 0FE00344, 1060, 1502056, 162, 18813, 2060, 21060, 25013977, 25014831, 25160561, 25325409, 2945611070, 301218, 31060, 3510, 41060, 5001202791...VIEW MORE

Additional Fitment Information:
Vehicle Block CC Region Fuel Type Engine Aspiration CID
2000 - GMC K3500 V - Canada DIESEL 8 Cyl 6.5L Turbocharged 395

Fram
  • FRAM, HP4, Oil Filter
  • FRAM HIGH PERFORMANCE High Performance Spin-on Oil Filter
  • Product Attributes:
    • Non Slip Grip: No
    • Torque Nut: No
    • Attachment Type: Spin-on
    • Burst Pressure: 350.000
    • Housing Color: Orange
    • Inside Thread Diameter: 13/16-16
    • Bypass Relief Valve Setting: 16-28
    • Marine Approved: No
    • Outside Diameter: 3.608
    • Bypass Relief Valve: Yes
    • Filter Media Material: Cellulose/synthetic Blend
    • Anti-Drain Back Valve: Yes
  • FRAM Racing® Oil Filters are optimized for both racing and high performance street cars, and are compatible with all oil types. These filters deliver performance-enhancing features to support operating high-performance vehicles with engines put under tremendous pressure. FRAM Racing Oil Filters are compatible with all oil types.

This Part Fits the Following OEM/Substitute Numbers:
3I-1584, A151281 KIT, CK22, FF995, TP918

Additional Fitment Information:
Vehicle Block CC Engine CID
2000 - GMC K3500 V - 8 Cyl 6.5L 395

Fram
  • Spin-On Oil Defense
  • DEFENSE Spin-on Oil Filter

Additional Fitment Information:
Vehicle Block CC Engine CID
2000 - GMC K3500 V - 8 Cyl 7.4L 454

Fram
  • FRAM, XG5, Oil Filter
  • Spin-on Oil Filter
  • Ultra Synthetic
  • Product Attributes:
    • Burst Pressure: 230.000
    • Replaceable Filter: No
    • Inside Thread Diameter: 13/16-16
    • Marine Approved: No
    • Outside Diameter: 3.781
    • Non Slip Grip: Yes
    • Bypass Relief Valve: No
    • Filter Media Material: Cellulose/synthetic Blend
    • Anti-Drain Back Valve: Yes
    • Micron Rating: 3.000
    • Torque Nut: No
  • FRAM Ultra Synthetic® Oil Filters with SureGrip® is the proven leader in ultimate engine protection for today's cars and light duty trucks. Ultra Synthetic is engineered for drivers who require maximum engine protection and use synthetic motor oils for extended 20,000 mile change intervals. This high capacity, high efficiency filter delivers peak performance. No matter what you drive, or what motor oil you use, FRAM® has a filter for you.

This Part Fits the Following OEM/Substitute Numbers:
BF1352SPS, P550660, VF5

Additional Fitment Information:
Vehicle Block CC Engine CID
2000 - GMC K3500 V - 8 Cyl 6.5L 395

Fram
  • FRAM, PH3980, Oil Filter
  • Spin-on Oil Filter
  • Extra Guard
  • Product Attributes:
    • Gasket Inside Diameter: 2.469
    • Non Slip Grip: Yes
    • Gasket Thickness: 0.078
    • Micron Rating: 8.000
    • Torque Nut: No
    • Burst Pressure: 310.000
    • Gasket Type: Base
    • Marine Approved: No
    • Outside Diameter: 2.984
    • Gasket Outside Diameter: 2.828
    • Bypass Relief Valve: No
    • Filter Media Material: Cellulose/synthetic Blend
    • Anti-Drain Back Valve: Yes
  • FRAM Extra Guard® Oil Filters with SureGrip® deliver advanced engine protection for everyday drivers who perform routine oil changes at OE recommended intervals. Extra Guard is engineered for extended performance that meets all manufacturers’ recommended change intervals. No matter what you drive, or what motor oil you use, FRAM® has a filter for you.

This Part Fits the Following OEM/Substitute Numbers:
51791EC, 7E-6013, 84182MP, WC19

Additional Fitment Information:
Vehicle Block CC Engine CID
2000 - GMC K3500 V - 8 Cyl 5.7L 350

Fram
  • FRAM, PH5, Oil Filter
  • Spin-on Oil Filter
  • Extra Guard
  • Product Attributes:
    • Gasket Inside Diameter: 2.450
    • Non Slip Grip: Yes
    • Gasket Thickness: 0.191
    • Micron Rating: 8.000
    • Torque Nut: No
    • Burst Pressure: 230.000
    • Gasket Material: Nitrile Rubber
    • Housing Color: Orange
    • Inside Thread Diameter: 13/16-16
    • Marine Approved: No
    • Outside Diameter: 3.781
    • Gasket Outside Diameter: 2.760
    • Bypass Relief Valve: No
    • Filter Media Material: Cellulose/synthetic Blend
    • Anti-Drain Back Valve: Yes
  • FRAM Extra Guard® Oil Filters with SureGrip® deliver advanced engine protection for everyday drivers who perform routine oil changes at OE recommended intervals. Extra Guard is engineered for extended performance that meets all manufacturers’ recommended change intervals. No matter what you drive, or what motor oil you use, FRAM® has a filter for you.

This Part Fits the Following OEM/Substitute Numbers:
19210338, 85522MP, BD7029, LF3849, LF524F, PF61F

Additional Fitment Information:
Vehicle Block CC Engine CID
2000 - GMC K3500 V - 8 Cyl 6.5L 395

Wix
  • WIX Spin-On Lube Filter
  • Manufacturer OE Recommended Oil Change Intervals
  • Product Attributes:
    • California Proposition 65: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
    • Inner Diameter Top: Closed
    • Outer Diameter Top: 3.66
    • Duty Type: Ld
    • Micron: 21.00
    • Flow Rate: 9-11 Gpm
    • Style: Spin-on Lube Filter
    • Class: A
    • Burst Pressure: 245
    • BetaRatio: 2/20=6/20
    • Bypass Relief Valve Setting: None
    • Media Material: Enhanced Cellulose
    • Anti-Drain Back Valve: Yes
  • WIX Oil Filters provide excellent engine protection using conventional, synthetic, or synthetic-blended motor oils, as recommended by the OE vehicle manufacturer, for normal and severe driving conditions such as stop and go traffic, dirt roads, construction sites, short trips, and interstate travel. WIX filters are recommended for OEM oil and filter change intervals, typically 3,750 to 10,000 miles, not to exceed 12 months. This filter traps up to 50% more dirt and contaminants than Protec with the best combination of capacity & efficiency for severe conditions. When applicable, WIX flexible silicone anti-drainback valve protects against dry engine starts past the traditional filter change interval. Laboratory Test Performance per ISO 454812 18 grams dirt (WIX 51515), 99% efficient at 23 microns (Based on WIX 51515, WIX 51356, WIX 57060)

This Part Fits the Following OEM/Substitute Numbers:
10454, 106498, 1502053, 175, 1AML00013A, 25324052, 25325042, 26324057, 27099, 27099MP, 3322, 35866340K01, 35866340Q02, 35866340Q03, 37099, 393982, 47099, 5001202781...VIEW MORE

Additional Fitment Information:
Vehicle Block CC Region Engine CID
2000 - GMC K3500 V - Canada 8 Cyl 7.4L 454
Showing 1 - 10 of 27 products

Loading...