2007 Honda S2000 Engine Oil Filter Parts
Image
Product
Price
- PROTEC-NEW Spin-On Lube Filter
- Original Equipment Part Number 15400-679-023 Master Pack Version
- Product Attributes:
- Inner Diameter Top: Closed
- Outer Diameter Top: 3.15
- Burst Pressure: 280
- Duty Type: Ld
- Micron: 21.00
- BetaRatio: 2/20=6/20
- Bypass Relief Valve Setting: 8-11
- Flow Rate: 9-11 Gpm
- Media Material: Enhanced Cellulose
- Class: A
- Anti-Drain Back Valve: Yes
- Use Protec For Normal Diving- Advanced engine protection- Ideal filter for traditional OE recommended oil change intervals up to 10,000 miles- Cellulose and resin filter media provides up to 96.5% dirt trapping efficiency- Performs well in everyday normal driving conditions such as city and highway travel- Nitrile gasket- Solid metal end caps provide positive seal
- This item must be purchased in quantities of 12
This Part Fits the Following OEM/Substitute Numbers:
0 451 103 275, 0 451 103 316, 0 986 452 006, 0 986 452 007, 0 986 452 016, 0 986 452 036, 0 986 452 059, 0 986 452 916, 0 986 AF0 047, 0 986 AF0 064, 0 986 AF1 038, 0 986 AF1 093, 0 986 AF1 181, 0410706, 0410734, 0410749, 0410760, 0410768...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Region | Engine | CID |
|---|---|---|---|---|---|
| 2007 - Honda S2000 | L | 2157 | Canada | 4 Cyl 2.2L | - |
- PROTEC-NEW Spin-On Lube Filter
- Original Equipment Part Number 15400-679-023 Also Available In Master Pack Version Also Available In Master Pack Version
- Product Attributes:
- Inner Diameter Top: Closed
- Outer Diameter Top: 3.15
- Burst Pressure: 280
- Duty Type: Ld
- Micron: 21.00
- BetaRatio: 2/20=6/20
- Bypass Relief Valve Setting: 8-11
- Flow Rate: 9-11 Gpm
- Media Material: Enhanced Cellulose
- Class: A
- Anti-Drain Back Valve: Yes
- Use Protec For Normal Diving- Advanced engine protection- Ideal filter for traditional OE recommended oil change intervals up to 10,000 miles- Cellulose and resin filter media provides up to 96.5% dirt trapping efficiency- Performs well in everyday normal driving conditions such as city and highway travel- Nitrile gasket- Solid metal end caps provide positive seal
This Part Fits the Following OEM/Substitute Numbers:
0 451 103 275, 0 451 103 316, 0 986 452 006, 0 986 452 007, 0 986 452 016, 0 986 452 036, 0 986 452 059, 0 986 452 916, 0 986 AF0 047, 0 986 AF0 064, 0 986 AF1 038, 0 986 AF1 093, 0 986 AF1 181, 0410706, 0410734, 0410749, 0410760, 0410768...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Region | Engine | CID |
|---|---|---|---|---|---|
| 2007 - Honda S2000 | L | 2157 | Canada | 4 Cyl 2.2L | - |
- FRAM, TG6607, Oil Filter
- Spin-on Oil Filter
- Tough Guard
- Product Attributes:
- Reusable: No
- Grade Type: Premium
- Replacable Filter: Yes
- Gasket Inside Diameter: 2.266
- Non Slip Grip: Yes
- Gasket Thickness: 0.203
- Torque Nut: No
- Attachment Type: Spin-on
- Gasket Type: Base
- Housing Color: Silver
- Inside Thread Diameter: M20x1.5
- Bypass Relief Valve Setting: 13
- Grade: Premium
- Gasket Outside Diameter: 2.531
- Meets Or Exceeds Original Equipment Manufacturer Specifications: Yes
- Bypass Relief Valve: Yes
- Filter Media Material: Cellulose/synthetic Blend
- Anti-Drain Back Valve: Yes
-
Features:
- Proven protection for up to 15,000 miles (24,000 kilometers)
- Engineered for tough driving conditions, stop and go traffic, and hot and cold temperatures
- SureGrip® technology for easy install and removal
- Synthetic blend media provides 99% dirt holding capacity
- Silicone anti-drain back valve helps ensure safe engine start up
- FRAM Tough Guard® oil filters are designed for tough driving conditions, stop and go traffic, and hot and cold temperatures. The synthetic blend media is engineered to perform with conventional and synthetic motor oil. Equipped with SureGrip® technology, FRAM Tough Guard oil filters provide a non-slip surface allowing for easy install and removal. The silicone anti-drain back valve ensures safe engine startups, extending the life of the oil filter for up to 15,000 miles (24,000 kilometers).
This Part Fits the Following OEM/Substitute Numbers:
041-8136, 0B631-14-302, 115010-6370, 119305-35150, 119305-35151, 1230A040, 124450-35100, 132 180 0010, 1365, 150-1008, 150-1011, 15208-31U0C, 15208-65F00, 15208-65F01, 15208-65F0A, 15208-65F0B, 15208-65F0C, 15208-65F0D...VIEW MORE
Additional Fitment Information:
| Vehicle |
|---|
| 2007 - Honda S2000 |
- WIX Spin-On Lube Filter
- Original Equipment Part Number 15400-679-023 Master Pack Version ; Manufacturer OE Recommended Oil Change Intervals
- Product Attributes:
- Inner Diameter Top: Closed
- Outer Diameter Top: 3.15
- Burst Pressure: 280
- Duty Type: Ld
- Micron: 21.00
- BetaRatio: 2/20=6/20
- Bypass Relief Valve Setting: 8-11
- Flow Rate: 9-11 Gpm
- Media Material: Enhanced Cellulose
- Class: A
- Anti-Drain Back Valve: Yes
- Use Wix Premium For Severe Driving -Ideal match for synthetic and high mileage motor oils -Meets of exceeds OE recommended change intervals – up to 15,000 miles -Synthetic blended media provides 99% dirt trapping efficiency -Silicone anti-drainback valve prevents dry starts -Superior performance in stop and go and heavy traffic -Performs well for routine towing -High capacity – ideal for dirty and dusty environments -Long life, tight-fitting gasket -Solid metal end caps provide positive sealMaster packs save money and have less waste.
- This item must be purchased in quantities of 12
This Part Fits the Following OEM/Substitute Numbers:
1334MP, 21334MP, 3593A, 51334MP, 520532091, 61334BP, 618-51334MP, 85334MP, B4459MP, L4459BP, LF3462, LP4459BP, PH2808B, PH3593AFP, PH9688FP, PXL51334MP, R85334MP, V4459BP...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Region | Engine | CID |
|---|---|---|---|---|---|
| 2007 - Honda S2000 | L | 2157 | Canada | 4 Cyl 2.2L | - |
- Oil Filter
- H-3.406 in.; OD-3.15 in.; M20 x 1.5-6H Thread; psi Relief Valve 11-17 Premium Oil Filter w/Wrench Off Nut
- K/N Wrench-Off oil filters are engineered to help ensure high flow rates and exceptional protection from contaminants. Each filter comes with a hex nut welded to the top of the canister; allowing for easy removal with a standard wrench.
- Performance Gold Oil Filter
- Product Attributes:
- Removal Nut Size: 1.000 In.
- WARNING CA Proposition 65: No
- Bypass Valve: Yes
- Item Weight: 0.800 Lbs. (0.3 Kg)
- Product Box Height: 4.000 In. (102mm)
- Filter Material: High Flow Premium Media
- Gasket Material: Viton Rubber
- Product Box Width: 3.190 In. (81mm)
- Package Material: Paperboard
- Product Box Length: 3.190 In. (81mm)
- PSI Relief Valve: 11-17
- Removal Nut: Yes
- Item Height: 3.406 In. (87mm)
- Package Type: Box
- Anti-Drain Back Valve: Yes
-
Features:
- OE Replacement Oil Filter
- 1 in. Exposed Nut Designed For Easy Oil Filter Removal
- Heavy Duty Construction For Extreme Conditions
- Anti-Drain Back Valve - Where Applicable - Eliminates Dry Starts
- K&N premium oil filters are meticulously engineered to offer outstanding filtration and engine protection. Designed to operate with all synthetic, conventional, and blended motor oils, K&N's pleated synthetic-blend filtration media helps to shield your engine from contaminants and ensure a consistent flow of oil. The heavy-duty canister is engineered to be exceptionally durable, and a one-inch welded hex nut can be used for quick and easy filter removal. Each filter is specifically designed to withstand the service intervals recommended by vehicle manufacturers, and is protected by the K&N 1-Year Limited Warranty.
This Part Fits the Following OEM/Substitute Numbers:
102703301, 104079A1, 1146934, 116182, 116509, 11713229, 11900535100, 11900535151, 119530030, 11966035150, 1200664, 121433, 1216382301, 12195035152, 12195035153, 1220827, 1220833, 12445035100...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2007 - Honda S2000 | L | 2157 | 4 Cyl 2.2L | - |
Additional Fitment Information:
| Vehicle |
|---|
| 2007 - Honda S2000 |
- This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
- Spin-On
Additional Fitment Information:
| Vehicle |
|---|
| 2007 - Honda S2000 |
- Engine Oil Filter For Nissan Mazda Rogue 3 CX-5 Sentra INFINITI Altima Subaru 2
- LOOP Engine Oil Filter LOP-LP6607 For Nissan Mazda Rogue 3 CX-5 Sentra INFINITI Altima Subaru Murano Versa Pathfinder Sport Kicks CX-3 Micra Qashqai Note Frontier Impreza Honda QX60 Forester Civic 2 6
- Loop
- Product Attributes:
- WebNameEbay4: For Nissan Mazda Rogue 3 Cx-5 Sentra Infiniti Versa Engine Oil Filter Lop-lp6607
- ComponentsSummaryRegularWithBrands: Loop Engine Oil Filter
- ComponentsSummaryShort: Engine Oil Filter
- ComponentsSummaryLongWithBrands: 1x Loop Engine Oil Filter
- WebNamePlain: Loop Engine Oil Filter Lop-lp6607
- ComponentsSummaryShortWithBrands: Loop Engine Oil Filter
- NumberOfPieces: 1
- ComponentsSummaryLong: 1x Engine Oil Filter
- WebNameLong: Loop Engine Oil Filter Lop-lp6607 For Nissan Mazda Rogue 3 Cx-5 Sentra Infiniti Altima Subaru Murano Versa Pathfinder Sport Kicks Cx-3 Micra Qashqai Note Frontier Impreza Honda Qx60 Forester Civic Cx-30 Outback Juke Cx-9 2 Maxima 6 Qx50 Miata Q50 G37 Lega
- WebNameShort: Engine Oil Filter Lop-lp6607 For Nissan Mazda Rogue 3 Cx-5 Sentra Infiniti Altima Subaru Murano Cx-3
- ComponentsSummaryRegular: Engine Oil Filter
- WebNameRegular: Loop Engine Oil Filter Lop-lp6607 For Nissan Mazda Rogue 3 Cx-5 Sentra Infiniti Altima Subaru Murano Versa Pathfinder Sport Kicks Cx-3 Micra Qashqai Note Frontier Impreza Honda Qx60 Forester Civic 2 6
- WebNameEbay2: Engine Oil Filter Lop-lp6607 For Nissan Mazda Rogue 3 Cx-5 Sentra Infiniti 2
- WebNameEbay3: Engine Oil Filter Lop-lp6607 For Nissan Mazda Rogue 3 Cx-5 Sentra Infiniti Versa
- WebNameEbay: Engine Oil Filter For Nissan Mazda Rogue 3 Cx-5 Sentra Infiniti Altima Subaru 2
-
Features:
- Pressure-relief valves help minimize the chance of contaminated oil circulating back into the engine
- Pressure-relief valves also help maintain the supply of oil to the engine under extreme cold conditions or if the filter gets clogged
- Steel cases are "ironed" for a precise fit, fluted to ease removal and painted to resist rust
- Efficient filter media offers increased dirt-collecting capability and ability to capture more engine-harming particles
- Provided with anti-drain back valve
- Part Reference Numbers : PF1237 85358 85365 S4612 S4615 X4612 X4615 PH6607 OF14615 SEE OF14610 LF113 TF170 PZ37 L14612 L14615 L14622 P1285 AT6607 FP6607 LP6607 TFC-538 VO54 51358 51365 57712
- LOP offers the ultimate Engine Oil Filter on the market. The unmatched performance and robustness coupled with longer lasting components make our supension parts the go-to choice for thousands of mechanical shops in North America. Designed, tested and certified by LOP certified engineers.
This Part Fits the Following OEM/Substitute Numbers:
51358, 51365, 57712, 85358, 85365, AT6607, FP6607, L14612, L14615, L14622, LF113, LP6607, OF14610, OF14615, P1285, PF1237, PH6607, PZ37...VIEW MORE
Additional Fitment Information:
| Vehicle |
|---|
| 2007 - Honda S2000 |
- FRAM, PH6607, Oil Filter
- Spin-on Oil Filter
- Extra Guard
- Product Attributes:
- Inside Thread Diameter: M20x1.5
- Bypass Relief Valve Setting: 13
- Gasket Inside Diameter: 2.266
- Gasket Outside Diameter: 2.531
- Gasket Thickness: 0.203
-
Features:
- SureGrip® technology for easy install and removal
- Filter media is a blend of fiber and resin that captures 95% of the dirt particles
- Silicone anti-drain back valve helps ensure safe engine start up
- Proven protection for up to 10,000 miles (16,000 kilometers)
- Engineered for use with synthetic or conventional motor oils
- FRAM Extra Guard® oil filters deliver advanced engine protection for everyday drivers who perform routine oil changes at OE (original equipment) recommended intervals. Equipped with SureGrip® technology, FRAM Extra Guard® oil filters provide a non-slip surface allowing for easy install and removal. The silicone anti-drain back valve ensures safe engine startups, extending the life of the oil filter for up to 10,000 miles (16,000 kilometers).
This Part Fits the Following OEM/Substitute Numbers:
041-8136, 0B631-14-302, 115010-6370, 119305-35150, 119305-35151, 1230A040, 124450-35100, 132 180 0010, 1365, 150-1008, 150-1011, 15208-31U0C, 15208-65F00, 15208-65F01, 15208-65F0A, 15208-65F0B, 15208-65F0C, 15208-65F0D...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2007 - Honda S2000 | L | 2157 | 4 Cyl 2.2L | - |
- WIX Spin-On Lube Filter
- Original Equipment Part Number 15400-679-023 Also Available In Master Pack Version ; Manufacturer OE Recommended Oil Change Intervals
- Product Attributes:
- Inner Diameter Top: Closed
- Outer Diameter Top: 3.15
- Burst Pressure: 280
- Duty Type: Ld
- Micron: 21.00
- BetaRatio: 2/20=6/20
- Bypass Relief Valve Setting: 8-11
- Flow Rate: 9-11 Gpm
- Media Material: Enhanced Cellulose
- Class: A
- Anti-Drain Back Valve: Yes
- Use Wix Premium For Severe Driving -Ideal match for synthetic and high mileage motor oils -Meets of exceeds OE recommended change intervals – up to 15,000 miles -Synthetic blended media provides 99% dirt trapping efficiency -Silicone anti-drainback valve prevents dry starts -Superior performance in stop and go and heavy traffic -Performs well for routine towing -High capacity – ideal for dirty and dusty environments -Long life, tight-fitting gasket -Solid metal end caps provide positive seal.
This Part Fits the Following OEM/Substitute Numbers:
8-97140-666-0, 0 451 103 275, 0 451 103 316, 0 986 452 006, 0 986 452 007, 0 986 452 016, 0 986 452 036, 0 986 452 059, 0 986 452 916, 0 986 AF0 047, 0 986 AF0 064, 0 986 AF1 038, 0 986 AF1 093, 0 986 AF1 181, 0 RF03 23 802, 0 RF03 23802A, 000.14.145, 0116331...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Region | Engine | CID |
|---|---|---|---|---|---|
| 2007 - Honda S2000 | L | 2157 | Canada | 4 Cyl 2.2L | - |
Showing 1 - 10 of 14 products
Loading...