Image
Product
Price
- Oil Filter
- H-2.875 in.; OD-2.688 in.; M20x1.5 Thread; psi Relief Valve 11-17 Premium Oil Filter w/Wrench Off Nut
- K/N Wrench-Off oil filters are engineered to help ensure high flow rates and exceptional protection from contaminants. Each filter comes with a hex nut welded to the top of the canister; allowing for easy removal with a standard wrench.
- Performance Gold Oil Filter
- Product Attributes:
- Removal Nut Size: 1.000 In.
- WARNING CA Proposition 65: No
- Bypass Valve: Yes
- Item Weight: 0.600 Lbs. (0.2 Kg)
- Product Box Height: 3.630 In. (92mm)
- Filter Material: High Flow Premium Media
- Gasket Material: Viton Rubber
- Product Box Width: 3.160 In. (80 Mm)
- Package Material: Paperboard
- Product Box Length: 3.160 In. (80mm)
- PSI Relief Valve: 11-17
- Removal Nut: Yes
- Item Height: 2.875 In. (73mm)
- Package Type: Box
- Anti-Drain Back Valve: Yes
-
Features:
- OE Replacement Oil Filter
- 1 in. Exposed Nut Designed For Easy Oil Filter Removal
- Heavy Duty Construction For Extreme Conditions
- Anti-Drain Back Valve - Where Applicable - Eliminates Dry Starts
- K&N premium oil filters are meticulously engineered to offer outstanding filtration and engine protection. Designed to operate with all synthetic, conventional, and blended motor oils, K&N's pleated synthetic-blend filtration media helps to shield your engine from contaminants and ensure a consistent flow of oil. The heavy-duty canister is engineered to be exceptionally durable, and a one-inch welded hex nut can be used for quick and easy filter removal. Each filter is specifically designed to withstand the service intervals recommended by vehicle manufacturers, and is protected by the K&N 1-Year Limited Warranty.
This Part Fits the Following OEM/Substitute Numbers:
1173228, 11930535150, 11930535151, 1321800010, 1520831UOB, 1520865F0C, 1520865F0E, 15208AA12A, 15208K010, 15400PFB004, 15400PFB014, 15400PJ7005, 15400PM3004, 15410MFJD01, 158332430, 1585332430, 1585399179, 1857444...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2013 - Mazda 2 | L | 1498 | 4 Cyl 1.5L | 91 |
- PRO-TEC Spin-On Lube Filter
- Master Pack Version; Oil Drain Intervals of up to 5000 miles
- Product Attributes:
- California Proposition 65: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Inner Diameter Top: Closed
- Outer Diameter Top: 2.69
- Burst Pressure: 300
- Duty Type: Ld
- Micron: 21.00
- BetaRatio: 2/20=6/20
- Bypass Relief Valve Setting: 8-11
- Flow Rate: 9-11 Gpm
- Media Material: Enhanced Cellulose
- Class: A
- Protec Oil Filters provide good engine protection using conventional motor oil for everyday normal driving conditions such as city and highway travel. Recommended for traditional oil and filter change intervals, typically 3,000 to 5,000 miles. Laboratory Test Performance per ISO 454812 13 grams dirt (Protec 101), 95% efficient at 29 microns (Based on Protec 164, 115, 101)
- This item must be purchased in quantities of 12
This Part Fits the Following OEM/Substitute Numbers:
1365, 168, 21365, 21365MP, 31365, 51365, 51365XP, 61365, 61365BP, 61651365, 618-51365, 618-51365MP, 8-51365, 83739, 85365, 88365, 89189, B4622...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Region | Engine | CID |
|---|---|---|---|---|---|
| 2013 - Mazda 2 | L | 1498 | Mexico | 4 Cyl 1.5L | 91 |
- Spin-on Oil Filter
- Tough Guard
- Product Attributes:
- Reusable: No
- Grade Type: Premium
- Replacable Filter: Yes
- Gasket Inside Diameter: 2.266
- Height: 2.625
- Non Slip Grip: Yes
- Gasket Thickness: 0.203
- Torque Nut: No
- Attachment Type: Spin-on
- Gasket Type: Base
- Housing Color: Silver
- Inside Thread Diameter: M20x1.5
- Bypass Relief Valve Setting: 13
- Inlet Type: Threaded
- Outside Diameter: 2.690
- Grade: Premium
- Gasket Outside Diameter: 2.531
- Bypass Relief Valve: Yes
- Filter Media Material: Cellulose/synthetic Blend
- Anti-Drain Back Valve: Yes
This Part Fits the Following OEM/Substitute Numbers:
041-8136, 0B631-14-302, 115010-6370, 119305-35150, 119305-35151, 1230A040, 124450-35100, 132 180 0010, 1365, 150-1008, 150-1011, 15208-31U0C, 15208-65F00, 15208-65F01, 15208-65F0A, 15208-65F0B, 15208-65F0C, 15208-65F0D...VIEW MORE
Additional Fitment Information:
| Vehicle |
|---|
| 2013 - Mazda 2 |
- Spin-on Oil Filter
- Extra Guard
- Product Attributes:
- Reusable: No
- Grade Type: Regular
- Replacable Filter: Yes
- Gasket Inside Diameter: 2.266
- Height: 2.625
- Non Slip Grip: Yes
- Gasket Thickness: 0.203
- Torque Nut: No
- Attachment Type: Spin-on
- Gasket Type: Base
- Housing Color: Orange
- Inside Thread Diameter: M20x1.5
- Bypass Relief Valve Setting: 13
- Inlet Type: Threaded
- Outside Diameter: 2.690
- Grade: Advanced
- Gasket Outside Diameter: 2.531
- Bypass Relief Valve: Yes
- Filter Media Material: Cellulose/synthetic Blend
- Anti-Drain Back Valve: Yes
This Part Fits the Following OEM/Substitute Numbers:
041-8136, 0B631-14-302, 115010-6370, 119305-35150, 119305-35151, 1230A040, 124450-35100, 132 180 0010, 1365, 150-1008, 150-1011, 15208-31U0C, 15208-65F00, 15208-65F01, 15208-65F0A, 15208-65F0B, 15208-65F0C, 15208-65F0D...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2013 - Mazda 2 | L | 1498 | 4 Cyl 1.5L | 91 |
- WIX Spin-On Lube Filter
- Manufacturer OE Recommended Oil Change Intervals
- Product Attributes:
- California Proposition 65: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Inner Diameter Top: Closed
- Outer Diameter Top: 2.69
- Burst Pressure: 300
- Duty Type: Ld
- Micron: 21.00
- BetaRatio: 2/20=6/20
- Bypass Relief Valve Setting: 8-11
- Flow Rate: 9-11 Gpm
- Media Material: Enhanced Cellulose
- Class: A
- WIX Oil Filters provide excellent engine protection using conventional, synthetic, or synthetic-blended motor oils, as recommended by the OE vehicle manufacturer, for normal and severe driving conditions such as stop and go traffic, dirt roads, construction sites, short trips, and interstate travel. WIX filters are recommended for OEM oil and filter change intervals, typically 3,750 to 10,000 miles, not to exceed 12 months. This filter traps up to 50% more dirt and contaminants than Protec with the best combination of capacity & efficiency for severe conditions. When applicable, WIX flexible silicone anti-drainback valve protects against dry engine starts past the traditional filter change interval. Laboratory Test Performance per ISO 454812 18 grams dirt (WIX 51515), 99% efficient at 23 microns (Based on WIX 51515, WIX 51356, WIX 57060)
This Part Fits the Following OEM/Substitute Numbers:
0 451 103 292-3B4, 0 451 104 025, 0 451 104 068 RENAULT, 0 451 104 509 RENAULT, 0 986 AF2 428, 0410753, 0410798, 0418055, 0418136, 0418181, 0448001, 051365, 0FE00310, 10-01-121, 1000003052, 1001725, 1001892, 102876...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Region | Engine | CID |
|---|---|---|---|---|---|
| 2013 - Mazda 2 | L | 1498 | Mexico | 4 Cyl 1.5L | 91 |
- Engine Oil Filter
- Engine Oil Filter
- Engine Oil Filter - FTF Engine Oil Filter
- Product Attributes:
- Gasket Inside Diameter: 57.0
- Gasket Outside Diameter: 65.0
- Height: 65.0
- Bypass Relief Valve: Yes
- Filter Media Material: Paper
- Inside Thread Size:
- 0.79
- 0.80
- Anti-Drain Back Valve: Yes
- Working with various manufacturers, DENSO - already a global OEM leader in engine filtration components - continues to be an innovator and keeps DENSO ahead of the competition. First Time Fit Oil Filters are engineered to meet Denso's high quality standards delivering exemplary quality and performance. Quality assurance is guarenteed for Denso's First TIme Fit Oil Filters. You can be assured you're providing the best for your vehicle.
This Part Fits the Following OEM/Substitute Numbers:
0370-23-802, 0B631-14-302, 15208 AA021, 15208 AA022, 15208 AA023, 15208 AA024, 15208 AA060, 15208 AA080, 15208 AA09A, 15208 AA100, 15208 AA12A, 15208 KA010, 15208 KA012, 15208-65F00, 15208-65F01, 15208-65F0A, 15208-65F0B, 15208-65F0C...VIEW MORE
Additional Fitment Information:
| Vehicle |
|---|
| 2013 - Mazda 2 |
- Engine Oil Filter For Nissan Mazda Rogue 3 CX-5 Sentra INFINITI Altima Subaru 2
- LOOP Engine Oil Filter LOP-LP6607 For Nissan Mazda Rogue 3 CX-5 Sentra INFINITI Altima Subaru Murano Versa Pathfinder Sport Kicks CX-3 Micra Qashqai Note Frontier Impreza Honda Civic Forester QX60 2 6
- Loop
- Product Attributes:
- WebNameEbay4: For Nissan Mazda Rogue 3 Cx-5 Sentra Infiniti Versa Engine Oil Filter Lop-lp6607
- ComponentsSummaryRegularWithBrands: Loop Engine Oil Filter
- ComponentsSummaryShort: Engine Oil Filter
- ComponentsSummaryLongWithBrands: 1x Loop Engine Oil Filter
- WebNamePlain: Loop Engine Oil Filter Lop-lp6607
- ComponentsSummaryShortWithBrands: Loop Engine Oil Filter
- NumberOfPieces: 1
- ComponentsSummaryLong: 1x Engine Oil Filter
- WebNameLong: Loop Engine Oil Filter Lop-lp6607 For Nissan Mazda Rogue 3 Cx-5 Sentra Infiniti Altima Subaru Murano Versa Pathfinder Sport Kicks Cx-3 Micra Qashqai Note Frontier Impreza Honda Civic Forester Qx60 Cx-30 Outback Juke Cx-9 2 Maxima Qx50 6 Q50 Miata Legacy G
- WebNameShort: Engine Oil Filter Lop-lp6607 For Nissan Mazda Rogue 3 Cx-5 Sentra Infiniti Altima Subaru Murano Cx-3
- ComponentsSummaryRegular: Engine Oil Filter
- WebNameRegular: Loop Engine Oil Filter Lop-lp6607 For Nissan Mazda Rogue 3 Cx-5 Sentra Infiniti Altima Subaru Murano Versa Pathfinder Sport Kicks Cx-3 Micra Qashqai Note Frontier Impreza Honda Civic Forester Qx60 2 6
- WebNameEbay2: Engine Oil Filter Lop-lp6607 For Nissan Mazda Rogue 3 Cx-5 Sentra Infiniti 2
- WebNameEbay3: Engine Oil Filter Lop-lp6607 For Nissan Mazda Rogue 3 Cx-5 Sentra Infiniti Versa
- WebNameEbay: Engine Oil Filter For Nissan Mazda Rogue 3 Cx-5 Sentra Infiniti Altima Subaru 2
-
Features:
- Pressure-relief valves help minimize the chance of contaminated oil circulating back into the engine
- Pressure-relief valves also help maintain the supply of oil to the engine under extreme cold conditions or if the filter gets clogged
- Steel cases are "ironed" for a precise fit, fluted to ease removal and painted to resist rust
- Efficient filter media offers increased dirt-collecting capability and ability to capture more engine-harming particles
- Provided with anti-drain back valve
- Part Reference Numbers : PF1237 85358 85365 S4612 S4615 X4612 X4615 PH6607 OF14615 SEE OF14610 LF113 TF170 PZ37 L14612 L14615 L14622 P1285 AT6607 FP6607 LP6607 TFC-538 VO54 51358 51365 57712
- LOP offers the ultimate Engine Oil Filter on the market. The unmatched performance and robustness coupled with longer lasting components make our supension parts the go-to choice for thousands of mechanical shops in North America. Designed, tested and certified by LOP certified engineers.
This Part Fits the Following OEM/Substitute Numbers:
51358, 51365, 57712, 85358, 85365, AT6607, FP6607, L14612, L14615, L14622, LF113, LP6607, OF14610, OF14615, P1285, PF1237, PH6607, PZ37...VIEW MORE
Additional Fitment Information:
| Vehicle |
|---|
| 2013 - Mazda 2 |
Additional Fitment Information:
| Vehicle |
|---|
| 2013 - Mazda 2 |
Additional Fitment Information:
| Vehicle |
|---|
| 2013 - Mazda 2 |
Additional Fitment Information:
| Vehicle |
|---|
| 2013 - Mazda 2 |
Showing 1 - 10 of 12 products
Loading...