Image
Product
Price
- DynoMax Super Turbo Muffler
- Universal; Oval; 4.25 in. x 9.75 in.; 2.5 in. ID; 20 in. Shell Length; 25.5 in. Overall Length
- DynoMax Super Turbo Muffler
- Super Turbo Muffler
-
Features:
- Exclusive Patented Flow Director Design Channels Exhaust Flow
- Eliminates Turbulence
- Large Internal Flow Tubes Improve Exhaust Flow
- Large Internal Flow Tubes Reduce Backpressure
- Fiberglass Matting Tech To Absorb Unwanted Interior Resonance
- Maintains A Mellow Performance Tone
- Dyno Proven To Flow Up To 700 SCFM/Support Up To 636 HP
- Proudly Manufactured In The USA
- Limited Lifetime Warranty
- DynoMax(R) Super Turbo(TM) performance mufflers exclusive patented flow director design channels exhaust flow and eliminates turbulence on most applications. The large internal flow tubes improve exhaust flow and reduce backpressure. Each muffler uses fiberglass matting technology to absorb unwanted interior resonance while maintaining a mellow performance tone. The 'Pure Unadulterated POWER' of DynoMax(R) Super Turbo(TM) mufflers are backed by a Limited Lifetime Warranty and exclusive 90-Day Performance & Sound Guarantee(TM).
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | CID |
|---|---|---|---|---|---|
| 2005 - Toyota Tundra | V | 4663 | 8 Cyl 4.7L | SR5 | 285 |
- 2.5 in. Offset Inlet/Center Outlet; Case Dimensions 4 in. x 9.75 in. x 13 in.; 19 in. Overall Length; 409 Stainless Steel Not Direct Fit-Some Adaptation Required
- Super 44™ Delta Flow Muffler; 2.5 in. Offset Inlet/Center Outlet; Case Dimensions 4 in. x 9.75 in. x 13 in.; 19 in. Overall Length; 409 Stainless Steel;
- Super 44™ Delta Flow Muffler
- Product Attributes:
- Tip Quantity: 0
- Automotive Item Grade: High Performance
- Muffler Type: Reflection
- Outlet Connection Type: Pipe
- Outlet Position: Center
- Inlet Diameter: 2.500 In.
- Sound Level: Aggressive
- WARNING CA Proposition 65: Yes
- Fitment: Universal
- Body Width: 9.750 In.
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Muffler Series: Super 44 Series
- Inlet Inside Diameter: 2.500 In.
- Outlet Outside Diameter: 2.500 In.
- Main Piping Diameter: Oem
- Inlet Type: Single Offset
- Inlet Position: Offset
- Inlet Outside Diameter: 2.500 In.
- Inlet Connection Type: Pipe
- Outlet Type: Single Center Outlet
-
Features:
- Durable Fully Welded 16ga Stainless Steel
- Limited Lifetime Warranty
- Deep Aggressive Exhaust Note
- Noticeable Interior Resonance
- Recent Two Chamber Improvement
- Race Proven Patented Delta Flow® Technology
- No Internal Packing To Blowout
- Premium Flowmaster Quality
- Flowmaster's Super 44 muffler uses the same Delta Flow(R) technology found in our larger Super 40 mufflers. The Super 44 delivers a rich powerful tone and are the most aggressive, highest performing street muffler we've ever built in a four inch case. Constructed of 16 gauge 409S stainless steel and fully MIG welded for maximum durability.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
11226, 12226, 13216, 14326
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2005 - Toyota Tundra | V | 3956 | 6 Cyl 4.0L | 241 |
- 2.5 in. Offset Inlet/Center Outlet; Case Dimensions 4 in. x 9.75 in. x 17 in.; 23 in. Overall Length; 409 Stainless Steel Not Direct Fit-Some Adaptation Required
- 50 Series™ Delta Flow Muffler; 2.5 in. Offset Inlet/Center Outlet; Case Dimensions 4 in. x 9.75 in. x 17 in.; 23 in. Overall Length; 409 Stainless Steel;
- 50 Series™ Delta Flow Muffler
- Product Attributes:
- Tip Quantity: 0
- Automotive Item Grade: High Performance
- Muffler Type: Reflection
- Outlet Connection Type: Pipe
- Outlet Position: Center
- Inlet Diameter: 2.500 In.
- Sound Level: Moderate
- WARNING CA Proposition 65: Yes
- Fitment: Universal
- Body Width: 9.750 In.
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Muffler Series: 50 Series Delta Flow
- Inlet Inside Diameter: 2.500 In.
- Outlet Outside Diameter: 2.500 In.
- Main Piping Diameter: 2.500 In.
- Inlet Type: Single Offset
- Inlet Position: Offset
- Inlet Outside Diameter: 2.500 In.
- Inlet Connection Type: Pipe
- Outlet Type: Single Center Outlet
-
Features:
- Durable Fully Welded 409 Stainless Steel
- Limited Lifetime Warranty
- Mild to Moderate Exterior Exhaust Tone
- Minimal Interior Resonance
- Excellent Choice For Street Rods Cars and Trucks
- Improved HP/TQ and Potential Mileage Improvement
- Race Proven Patented Delta Flow® Technology
- Premium Flowmaster Quality
- The three chamber design utilizes Flowmaster's Delta Flow(R) technology along with an internal tuning chamber to reduce sound inside the vehicle. Provides the same performance and exterior tone characteristics as the two chamber, but with less interior resonance. Constructed of 16 gauge 409S stainless steel and fully MIG welded for maximum durability.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2005 - Toyota Tundra | V | 3956 | 6 Cyl 4.0L | 241 |
- 2.5 in. Offset Inlet/Center Outlet; Case Dimensions 4 in. x 9.75 in. x 13 in.; 19 in. Overall Length; 409 Stainless Steel
- 40 Series™ Muffler; 2.5 in. Offset Inlet/Center Outlet; Case Dimensions 4 in. x 9.75 in. x 13 in.; 19 in. Overall Length; 409 Stainless Steel;
- 40 Series™ Muffler
- Product Attributes:
- Tip Quantity: 0
- Automotive Item Grade: High Performance
- Muffler Type: Reflection
- Outlet Connection Type: Pipe
- Outlet Position: Center
- Inlet Diameter: 2.500 In.
- Sound Level: Aggressive
- WARNING CA Proposition 65: Yes
- Fitment: Universal
- Body Width: 9.750 In.
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Muffler Series: 40 Series
- Inlet Inside Diameter: 2.500 In.
- Outlet Outside Diameter: 2.500 In.
- Main Piping Diameter: Oem
- Inlet Type: Single Offset
- Inlet Position: Offset
- Inlet Outside Diameter: 2.500 In.
- Inlet Connection Type: Pipe
- Outlet Type: Single Center Outlet
-
Features:
- 409 Stainless Steel
- Limited Lifetime Warranty
- Aggressive And Powerful Exterior Exhaust Tone
- Notable Interior Resonance
- Excellent Street/Strip And Off Road Application
- No Internal Packing To Blowout
- The Original Two Chamber Design
- Premium Flowmaster Quality
- The Original 40 series muffler delivers an aggressive exterior and interior tone. If you're looking for that original Flowmaster sound this is the muffler is for you. Constructed of 16 gauge 409S stainless steel and fully MIG welded for maximum durability.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2005 - Toyota Tundra | V | 3956 | 6 Cyl 4.0L | 241 |
- 2.5 in. Offset Inlet/Center Outlet; Case Dimensions 4 in. x 9.75 in. x 13 in.; 19 in. Overall Length; Aluminized Steel Not Direct Fit-Some Adaptation Required
- 40 Series™ Delta Flow Muffler; 2.5 in. Offset Inlet/Center Outlet; Case Dimensions 4 in. x 9.75 in. x 13 in.; 19 in. Overall Length; Aluminized Steel;
- 40 Series™ Delta Flow Muffler
- Product Attributes:
- Tip Quantity: 0
- Automotive Item Grade: High Performance
- Muffler Type: Reflection
- Outlet Connection Type: Pipe
- Outlet Position: Center
- Inlet Diameter: 2.500 In.
- Sound Level: Aggressive
- WARNING CA Proposition 65: No
- Fitment: Universal
- Body Width: 9.750 In.
- Muffler Series: 40 Series Delta Flow
- Inlet Inside Diameter: 2.500 In.
- Outlet Outside Diameter: 2.500 In.
- Main Piping Diameter: 2.500 In.
- Inlet Type: Single Offset
- Inlet Position: Offset
- Inlet Outside Diameter: 2.500 In.
- Inlet Connection Type: Pipe
- Outlet Type: Single Center Outlet
-
Features:
- Durable Fully Welded 409 Stainless Steel
- Race Proven Patented Delta Flow® Technology
- Excellent Street/Strip And Off Road Application
- No Internal Packing To Blowout
- This two chamber design incorporates Flowmaster's Delta Flow(R) technology. The Delta deflectors generate increased scavenging for better performance and reduced interior sound. Milder exterior tone and reduced interior resonance over standard 40 series. Constructed of 16 gauge aluminized steel and fully MIG welded for maximum durability.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2005 - Toyota Tundra | V | 3956 | 6 Cyl 4.0L | 241 |
- 2.5 in. Offset Inlet/Center Outlet; Case Dimensions 4 in. x 9.75 in. x 13 in.; 19 in. Overall Length; Aluminized Steel Not Direct Fit-Some Adaptation Required
- 40 Series™ Muffler; 2.5 in. Offset Inlet/Center Outlet; Case Dimensions 4 in. x 9.75 in. x 13 in.; 19 in. Overall Length; Aluminized Steel;
- 40 Series™ Muffler
- Product Attributes:
- Tip Quantity: 0
- Automotive Item Grade: High Performance
- Muffler Type: Reflection
- Outlet Connection Type: Pipe
- Outlet Position: Center
- Inlet Diameter: 2.500 In.
- Sound Level: Aggressive
- WARNING CA Proposition 65: No
- Fitment: Universal
- Body Width: 9.750 In.
- Muffler Series: 40 Series
- Inlet Inside Diameter: 2.500 In.
- Outlet Outside Diameter: 2.500 In.
- Main Piping Diameter: Oem
- Inlet Type: Single Offset
- Inlet Position: Offset
- Inlet Outside Diameter: 2.500 In.
- Inlet Connection Type: Pipe
- Outlet Type: Single Center Outlet
-
Features:
- Durable Fully Welded 16ga Aluminized Steel
- 3 Year Limited Warranty
- Aggressive And Powerful Exterior Exhaust Tone
- Notable Interior Resonance
- Excellent Street/Strip And Off Road Application
- No Internal Packing To Blowout
- The Original Two Chamber Design
- Premium Flowmaster Quality
- The Original 40 series muffler delivers an aggressive exterior and interior tone. If you're looking for that original Flowmaster sound this is the muffler is for you. Constructed of 16 gauge aluminized steel and fully MIG welded for maximum durability.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2005 - Toyota Tundra | V | 3956 | 6 Cyl 4.0L | 241 |
- 2.5 Offset In/2.5 Center Out; Clamp On; 409 Stainless Steel Not Direct Fit-Some Adaptation Required
- FlowFX Muffler; 2.5 Offset In/2.5 Center Out; Clamp On; 409 Stainless Steel;
- FlowFX Muffler
- Product Attributes:
- Tip Quantity: 0
- Muffler Overall Length: 20.000 In.
- Muffler Type: Absorption
- Outlet Connection Type: Clamp-on
- Outlet Position: Center
- Sound Level: Moderate
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Muffler Body Width: 9.000 In.
- Muffler Series: Flow Fx
- Inlet Inside Diameter: 2.500 In.
- Muffler Body Length: 14.000 In.
- Main Piping Diameter: 2.500 In.
- Outlet Quantity: 1
- Inlet Quantity: 1
- Inlet Position: Offset
- Inlet Outside Diameter: 2.500 In.
- Inlet Connection Type: Clamp-on
- Outlet Type: Single Outlet
-
Features:
- Not A Direct Fit
- Moderate Sound
- Straight Through Style
- Fully Welded Steel Case
- Flowmaster's Flow FX series mufflers deliver a moderate performance tone for the enthusiast looking for an exhaust note that is different from the "chambered" muffler sound. The interior features a large 3.00-inch "straight-through" stainless steel perforated core, surrounded with high-temperature sound absorption materials delivering a deep traditional mellow tone. The internal flow design is reversible, so the muffler can be installed in either direction to best suit the vehicle application and offsets needed. Features include fully MIG-welded "bright" 409 stainless steel construction with the Flow FX logo embossed on both sides of the case. The Flow FX line of mufflers is perfect for the person looking for a show quality performance muffler at an economical price point and in a compact sized case.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2005 - Toyota Tundra | V | 3956 | 6 Cyl 4.0L | 241 |
- Super 44™ Delta Flow Muffler
- 2.5 in. Offset Inlet/Center Outlet; Case Dimensions 4 in. x 9.75 in. x 13 in.; 19 in. Overall Length; 409 Stainless Steel Not Direct Fit-Some Adaptation Required
- Super 44™ Delta Flow Muffler; 2.5 in. Offset Inlet/Center Outlet; Case Dimensions 4 in. x 9.75 in. x 13 in.; 19 in. Overall Length; 409 Stainless Steel;
- Super 44(TM) Delta Flow Muffler
- Product Attributes:
- Tip Quantity: 0
- Automotive Item Grade: High Performance
- Muffler Type: Reflection
- California Proposition 65 Chemical Name 2: Chromium (hexavalent Compounds)
- Outlet Connection Type: Pipe
- California Proposition 65 Chemical Name 1: Nickel (metallic)
- Outlet Position: Center
- Inlet Diameter: 2.500 In.
- Sound Level: Aggressive
- WARNING CA Proposition 65: Yes
- Fitment: Universal
- Body Width: 9.750 In.
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Muffler Series: Super 44 Series
- Inlet Inside Diameter: 2.500 In.
- Outlet Outside Diameter: 2.500 In.
- Main Piping Diameter: Oem
- Inlet Type: Single Offset
- Inlet Position: Offset
- Inlet Outside Diameter: 2.500 In.
- Inlet Connection Type: Pipe
- Outlet Type: Single Center Outlet
-
Features:
- Durable Fully Welded 16ga Stainless Steel
- Limited Lifetime Warranty
- Deep Aggressive Exhaust Note
- Noticeable Interior Resonance
- Recent Two Chamber Improvement
- Race Proven Patented Delta Flow® Technology
- No Internal Packing To Blowout
- Premium Flowmaster Quality
- Flowmaster's Super 44 muffler uses the same Delta Flow(R) technology found in our larger Super 40 mufflers. The Super 44 delivers a rich powerful tone and are the most aggressive, highest performing street muffler we've ever built in a four inch case. Constructed of 16 gauge 409S stainless steel and fully MIG welded for maximum durability.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2005 - Toyota Tundra | V | 3956 | 6 Cyl 4.0L | 241 |
- 2.50 in. Offset Inlet/Center Outlet; Case Dimensions 5 in. x 10 in. x 13.5 in.; 19.5 in. Overall Length; Aluminized Steel
- Super 40™ Delta Flow Muffler; 2.50 in. Offset Inlet/Center Outlet; Case Dimensions 5 in. x 10 in. x 13.5 in.; 19.5 in. Overall Length; Aluminized Steel;
- Super 40™ Delta Flow Muffler
- Product Attributes:
- Tip Quantity: 0
- Automotive Item Grade: High Performance
- Muffler Type: Reflection
- Outlet Connection Type: Pipe
- Outlet Position: Center
- Inlet Diameter: 2.500 In.
- Sound Level: Aggressive
- WARNING CA Proposition 65: No
- Fitment: Universal
- Body Width: 10.000 In.
- Muffler Series: Super 40 Series
- Inlet Inside Diameter: 2.500 In.
- Outlet Outside Diameter: 2.500 In.
- Main Piping Diameter: 2.500 In.
- Inlet Type: Single Offset
- Inlet Position: Offset
- Inlet Outside Diameter: 2.500 In.
- Inlet Connection Type: Pipe
- Outlet Type: Single Center Outlet
-
Features:
- Durable Fully Welded 16ga Aluminized Steel
- 3 Year Limited Warranty
- Deep Aggressive to Moderate Exhaust Note
- Moderate Interior Resonance
- Excellent Performance On High Horsepower Vehicles
- Race Proven Patented Delta Flow® Technology
- No Internal Packing To Blowout
- Premium Flowmaster Quality
- Noticeable Interior Resonance
- The Super 40(R) features Flowmaster's Delta Flow(R) technology. It's larger case profile provides the best of both worlds of performance and sound. The Super 40 has that deep powerful sound of the Original 40 series but with all the benefits of performance and low interior resonance from the Delta Flow® technology. Constructed of 16 gauge aluminized steel and fully MIG welded for maximum durability.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2005 - Toyota Tundra | V | 3956 | 6 Cyl 4.0L | 241 |
Showing 1 - 10 of 15 products
Loading...