Image
Product
Price
- 4in. Cat-Back. Single Side Exit. AL
- 4in. Cat-Back. Single Side Exit. Aluminized Steel.
- MBRP Armor Lite 4 Inch Cat Back Single Side Exit, No Tip
- Product Attributes:
- Major: Performance Gas
- Tail Pipe Quantity: 1
- Exhaust Tip Quantity: 0
- Fuel Type: Gasoline
- Muffler Flanged Inlet: No
- Minor: Single
- Tail Pipe Outlet Outside Diameter: 4
- Muffler Quantity: 1
- Muffler Outlet Quantity: 1
- Clamps Included: Yes
- Vehicle Segment: Truck
- Tail Pipe Tapered Outlet: No
- Bolt-On Yes/No: Yes
- Profile: Tour Profile
- Muffler Finish: Polished
- Inlet Type: Bolt-on
- UPS Able: Yes
- Prop 65 (C, R or CR): Cr
- Tubing Diameter: 4 Inch
- Hangers Included: Yes
- Exit Style:
- Single Side
- Single Side Exit
- Cutting Required: Cutting May Be Required
- Main Piping Diameter: 4
- Gasket Or Seal Included: No
- Clamping Type: Round Band
- Muffler Yes/No: Yes
- Muffler Body Material: Aluminized Steel
- Muffler Body Shape: Round
- Tip Shape: No Tip
- MBRP Series: Armor Lite
- Pipe Material: Aluminized Steel
-
Features:
- Heavy Duty Aluminized Steel, Fully Sealed Tubing for Rust Resistance. Bolt-on Installation. MBRP Signature Styling and Sound.
- THE BEST BANG FOR YOUR BUCK - ARMOR LITE Series exhaust systems are a value option with the same fitment, performance and sound as the premium products from MBRP. Heavy-gauge Aluminized Steel tubing helps to resist dings and dents caused by debris under your vehicle. This material can be a great choice for you if you live in a dry climate that doesn’t see much precipitation, or if you’re looking for great sound on a budget. All of the tubing is mandrel bent for maximum exhaust flow. Mandrel bending ensures no rippling in the bends. The end result is that it gives you more fresh air inside your engine’s cylinders, allowing it to produce more power and improve vehicle performance and longevity. Part numbers ending in P and PLM carry a 1-year warranty. MBRP, Stand out from the crowd with a performance exhaust system that sounds great.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Bed Length | CID |
|---|---|---|---|---|---|
| 2002 - Ford F-250 Super Duty | V | - | 10 Cyl 6.8L | 81.0 | 415 |
- 4in. Turbo Back. Single Side Exit. No Muffler. AL
- Not For Use In Vehicles Equipped With Catalytic Converter
- 4in. Turbo Back. Single Side Exit. No Muffler. Aluminized Steel.
- MBRP Armor Lite 4 Inch Turbo Back Single Side Exit, No Tip or Muffler
- Product Attributes:
- Muffler Type: No Muffler
- Major: Diesel
- Tail Pipe Quantity: 1
- Exhaust Tip Quantity: 0
- Fuel Type: Diesel
- Minor: Single
- Restrictions: Not For Use On Vehicles Equipped With A Catalytic Converter
- Tail Pipe Outlet Outside Diameter: 4
- Muffler Quantity: 0
- Clamps Included: Yes
- Vehicle Segment: Truck
- Tail Pipe Tapered Outlet: No
- Bolt-On Yes/No: Yes
- Profile: Street Profile
- Exhaust Tip Intercooled: No
- Valve Included: No
- Inlet Type: Single
- UPS Able: Yes
- Prop 65 (C, R or CR): Cr
- Tubing Diameter: 4 Inch
- Hangers Included: Yes
- Exit Style:
- Single Side
- Single Side Exit
- Cutting Required: Cutting May Be Required
- Main Piping Diameter: 4
- Clamping Type: Round Band
- Gasket Or Seal Included: No
- Muffler Yes/No: No
- Tip Shape: No Tip
- MBRP Series: Armor Lite
- Pipe Material: Aluminized Steel
-
Features:
- Heavy Duty Aluminized Steel, Fully Sealed Tubing for Rust Resistance. Bolt-on Installation. Enhanced Flow. MBRP Signature Styling and Sound.
- THE BEST BANG FOR YOUR BUCK - ARMOR LITE Series exhaust systems are a value option with the same fitment, performance and sound as the premium products from MBRP. Heavy-gauge Aluminized Steel tubing helps to resist dings and dents caused by debris under your vehicle. This material can be a great choice for you if you live in a dry climate that doesn’t see much precipitation, or if you’re looking for great sound on a budget. All of the tubing is mandrel bent for maximum exhaust flow. Mandrel bending ensures no rippling in the bends. The end result is that it gives you more fresh air inside your engine’s cylinders, allowing it to produce more power and improve vehicle performance and longevity. Part numbers ending in P and PLM carry a 1-year warranty. MBRP, Stand out from the crowd with a performance exhaust system that sounds great.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Bed Length | CID |
|---|---|---|---|---|---|
| 2002 - Ford F-250 Super Duty | V | - | 8 Cyl 7.3L | 81.0 | 445 |
- 4in. Turbo Back. Single Side Exit. AL
- Not For Use In Vehicles Equipped With Catalytic Converter
- 4in. Turbo Back. Single Side Exit. Aluminized Steel.
- MBRP Armor Lite 4 Inch Turbo Back Single Side Exit with Polished Tip
- Product Attributes:
- Exhaust Tip Wall: Single
- Major: Diesel
- Tail Pipe Quantity: 1
- Exhaust Tip Edge: Rolled End
- Exhaust Tip Quantity: 1
- Fuel Type: Diesel
- Muffler Flanged Inlet: No
- Minor: Single
- Tail Pipe Outlet Outside Diameter: 4
- Exhaust Tip Material: Stainless Steel
- Muffler Quantity: 1
- Muffler Body Length: 15.75
- Muffler Outlet Quantity: 1
- Clamps Included: Yes
- Vehicle Segment: Truck
- Muffler Flanged Outlet: No
- Tail Pipe Tapered Outlet: No
- Bolt-On Yes/No: Yes
- Muffler Body Height: 6
- Profile: Street Profile
- Exhaust Tip Length: 12
- Exhaust Tip Intercooled: No
- Muffler Finish: Polished
- Muffler Outlet Connection: Slip-fit
- Inlet Type: Slip-on
- UPS Able: Yes
- Muffler Inlet Connection: Slip-fit
- Prop 65 (C, R or CR): Cr
- Tubing Diameter: 4 Inch
- Exhaust Tip Cut: Angle
- Exhaust Tip Connection: Slip-on
- Hangers Included: Yes
- Exit Style:
- Single Side
- Single Side Exit
- Muffler Body Width: 6
- Cutting Required: Cutting May Be Required
- Main Piping Diameter: 4
- Clamping Type: Round Band
- Exhaust Tip Resonated: No
- Muffler Yes/No: Yes
- Exhaust Tip Shape: Round
- Muffler Body Material: Aluminized Steel
- Muffler Body Shape: Round
- Tip Shape: Round
- MBRP Series: Armor Lite
- Exhaust Tip Diameter: 5
- Pipe Material: Aluminized Steel
- Exhaust Tip Finish: Polished
-
Features:
- Heavy Duty Aluminized Steel, Fully Sealed Tubing for Rust Resistance. Bolt-on Installation. MBRP Signature Styling and Sound.
- THE BEST BANG FOR YOUR BUCK - ARMOR LITE Series exhaust systems are a value option with the same fitment, performance and sound as the premium products from MBRP. Heavy-gauge Aluminized Steel tubing helps to resist dings and dents caused by debris under your vehicle. This material can be a great choice for you if you live in a dry climate that doesn’t see much precipitation, or if you’re looking for great sound on a budget. All of the tubing is mandrel bent for maximum exhaust flow. Mandrel bending ensures no rippling in the bends. The end result is that it gives you more fresh air inside your engine’s cylinders, allowing it to produce more power and improve vehicle performance and longevity. MBRP, Stand out from the crowd with a performance exhaust system that sounds great.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Bed Length | CID |
|---|---|---|---|---|---|
| 2002 - Ford F-250 Super Duty | V | - | 8 Cyl 7.3L | 81.0 | 445 |
- 5in. Turbo Back. Single Side Exit. No Muffler. Off-Road. T409
- Not for use on vehicles equipped with catalytic converter.
- 5in. Turbo Back. Single Side Exit. No Muffler. Off-Road. T409 Stainless Steel.
- Armor Plus Turbo Back Exhaust System
- Product Attributes:
- Muffler Type: No Muffler
- Major: Diesel
- Tail Pipe Quantity: 1
- Exhaust Tip Quantity: 0
- Fuel Type: Diesel
- Minor: Single
- Restrictions: Not For Use On Vehicles Equipped With A Catalytic Converter
- Tail Pipe Outlet Outside Diameter: 5
- Muffler Quantity: 0
- Clamps Included: Yes
- Vehicle Segment: Truck
- Tail Pipe Tapered Outlet: No
- Bolt-On Yes/No: Yes
- Profile: Race Profile
- Exhaust Tip Intercooled: No
- Valve Included: No
- Inlet Type: Single
- UPS Able: Yes
- Prop 65 (C, R or CR): Cr
- Tubing Diameter: 5 Inch
- Hangers Included: Yes
- Exit Style:
- Single Side
- Single Side Exit
- Cutting Required: Cutting May Be Required
- Main Piping Diameter: 5
- Clamping Type: Round Band
- Gasket Or Seal Included: No
- Muffler Yes/No: No
- Tip Shape: No Tip
- MBRP Series: Armor Plus
- Pipe Material: T409 Stainless Steel
-
Features:
- Rugged T409 Stainless Steel Construction. Bolt-on Installation. Enhanced Flow. MBRP Signature Styling and Sound.
- RELIABILITY AND DURABILITY - ARMOR PLUS Series exhaust systems are crafted from corrosion-resistant T409 Stainless Steel - a value-oriented material designed to protect from penetrating rust and will stand up to almost anything you can throw at it. T409 Stainless Steel tubing is easy to clean. If you don’t find yourself faced with lots of precipitation and salt, this is all you’re ever going to need. All of the tubing is mandrel bent for maximum exhaust flow. Mandrel bending ensures no rippling in the bends. The end result is that it gives you more fresh air inside your engine’s cylinders, allowing it to produce more power and improve vehicle performance and longevity. It's important to note that T409 Stainless Steel is resistant to penetrating rust but winter conditions, heavy salt air, and road treatments might accelerate the corrosion process, these conditions are not covered by MBRP's manufacturer warranty unless the part or system fails completely. When it comes to a performance exhaust system, choose the MBRP ARMOR PLUS Series for a reliable option backed with a 5-Year Warranty on Part Numbers ending in SLM. MBRP, Stand out from the crowd with a performance exhaust system that sounds great.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Bed Length | Sub Model | Body | Engine Version | CID |
|---|---|---|---|---|---|---|---|---|
| 2002 - Ford F-250 Super Duty | V | - | 8 Cyl 7.3L | 96.0 | XLT | Standard Cab Pickup | Power-Stroke | 445 |
- 4in. Turbo Back. Single Side Exit. No Muffler. T409
- Not For Use In Vehicles Equipped With Catalytic Converter
- 4in. Turbo Back. Single Side Exit. No Muffler. T409 Stainless Steel.
- MBRP Armor Plus 4 Inch Turbo Back Single Side Exit, No Tip or Muffler
- Product Attributes:
- Muffler Type: No Muffler
- Major: Diesel
- Tail Pipe Quantity: 1
- Exhaust Tip Quantity: 0
- Fuel Type: Diesel
- Minor: Single
- Restrictions: Not For Use On Vehicles Equipped With A Catalytic Converter
- Tail Pipe Outlet Outside Diameter: 4
- Muffler Quantity: 0
- Clamps Included: Yes
- Vehicle Segment: Truck
- Tail Pipe Tapered Outlet: No
- Bolt-On Yes/No: Yes
- Profile: Street Profile
- Exhaust Tip Intercooled: No
- Valve Included: No
- Inlet Type: Single
- UPS Able: Yes
- Prop 65 (C, R or CR): Cr
- Tubing Diameter: 4 Inch
- Hangers Included: Yes
- Exit Style:
- Single Side
- Single Side Exit
- Cutting Required: Cutting May Be Required
- Main Piping Diameter: 4
- Clamping Type: Round Band
- Gasket Or Seal Included: No
- Muffler Yes/No: No
- Tip Shape: No Tip
- MBRP Series: Armor Plus
- Pipe Material: T409 Stainless Steel
-
Features:
- Rugged T409 Stainless Steel Construction. Enhanced Flow. Bolt-on Installation. MBRP Signature Styling and Sound.
- RELIABILITY AND DURABILITY - ARMOR PLUS Series exhaust systems are crafted from corrosion-resistant T409 Stainless Steel - a value-oriented material designed to protect from penetrating rust and will stand up to almost anything you can throw at it. T409 Stainless Steel tubing is easy to clean. If you don’t find yourself faced with lots of precipitation and salt, this is all you’re ever going to need. All of the tubing is mandrel bent for maximum exhaust flow. Mandrel bending ensures no rippling in the bends. The end result is that it gives you more fresh air inside your engine’s cylinders, allowing it to produce more power and improve vehicle performance and longevity. It's important to note that T409 Stainless Steel is resistant to penetrating rust but winter conditions, heavy salt air, and road treatments might accelerate the corrosion process, these conditions are not covered by MBRP's manufacturer warranty unless the part or system fails completely. When it comes to a performance exhaust system, choose the MBRP ARMOR PLUS Series for a reliable option backed with a 5-Year Warranty on Part Numbers ending in SLM. MBRP, Stand out from the crowd with a performance exhaust system that sounds great.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Bed Length | CID |
|---|---|---|---|---|---|
| 2002 - Ford F-250 Super Duty | V | - | 8 Cyl 7.3L | 81.0 | 445 |
- Single Passenger Side Rear Exit
- Street Series Stainless Cat-Back System
- Street Series Stainless Cat-Back System
- Product Attributes:
- Main Piping Diameter: 3
- Muffler Type: Straight-through
- Tip Diameter: 4
- Muffler Finish: Satin
- Exit Style: Single Passenger Side Rear
- Tip Type: Welded;single Wall;angle Cut;rolled Edge
- Inlet Connection Type: Clamp-on
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Body | CID |
|---|---|---|---|---|---|
| 2002 - Ford F-250 Super Duty | V | - | 10 Cyl 6.8L | Extended Cab Pickup | 415 |
- Single Passenger Side Rear Exit
- Magnaflow Street Series Stainless Cat-Back System
- Street Series Stainless Cat-Back System
- Product Attributes:
- Exhaust Tip Wall: Single Wall
- Muffler Type: Straight-through
- Exhaust Tip Edge: Rolled Edge
- Exhaust Tip Quantity: 1
- Exhaust Tip Material: Stainless Steel
- Muffler Quantity: 1
- Muffler Body Length: 24
- Clamps Included: Yes
- Muffler Body Height: 5
- Exhaust Tip Length: 12
- Exhaust Tip Intercooled: No
- Muffler Finish: Brushed
- Valve Included: No
- Inlet Type: Clamp-on
- Exhaust Tip Cut: Angle Cut
- Exhaust Tip Connection: Welded-on
- Hangers Included: Yes
- Exit Style: Single Passenger Side Rear
- Muffler Body Width: 8
- Mounting Bracket Included: No
- Main Piping Diameter: 3
- Clamping Type: Band Clamp
- Gasket Or Seal Included: No
- Exhaust Tip Resonated: No
- Exhaust Tip Shape: Round
- Muffler Body Material: Stainless Steel
- Exhaust Tip Diameter: 4
- Catalytic Converter Quantity: 0
- Pipe Material: Stainless Steel
- Exhaust Tip Finish: Polished
-
Features:
- Dyno-proven performance
- Durable corrosion-resistant stainless steel construction
- CNC precision robotic manufacturing techniques
- The MagnaFlow Street Series Cat-Back Performance Exhaust System 15869 brings out the personality of your 6.8L 1999-2004 Ford with our signature resonant, powerful engine tone and dyno-proven performance. Thanks to its fast-flowing, mandrel bent 3in. main piping and 1 Straight-Through mufflers ending in a Single Passenger Side Rear exit with 4in. Polished Welded-On Single Wall Angle Cut Rolled Edge tips, this Ford exhaust kit has the performance chops to match its sporty sound and appearance. Upgrade your ride to the next level with an exhaust that has the pipes to put other Ford's to shame. With this system your vehicle will be producing Moderate exterior and Mild interior sound levels while leaving other cars and trucks feeling envious at every stoplight. Exhaust kit 15869 features a cat-back layout that replaces your ride's stock exhaust components from near the catalytic converter on back. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 15869 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow's 1-year limited finish warranty and limited lifetime construction warranty.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Body | CID |
|---|---|---|---|---|---|
| 2002 - Ford F-250 Super Duty | V | - | 10 Cyl 6.8L | Crew Cab Pickup | 415 |
- 4in. Cat-Back. Dual Side Exit. AL
- 4in. Cat-Back. Dual Side Exit. Aluminized Steel.
- MBRP Armor Lite 4 Inch Cat Back Dual Split Side with Polished Tip
- Product Attributes:
- Exhaust Tip Wall: Single
- Major: Performance Gas
- Tail Pipe Quantity: 2
- Exhaust Tip Edge: Rolled End
- Exhaust Tip Quantity: 2
- Fuel Type: Gasoline
- Muffler Flanged Inlet: No
- Minor: Dual
- Tail Pipe Outlet Outside Diameter: 4
- Exhaust Tip Material: Stainless Steel
- Muffler Quantity: 1
- Muffler Outlet Quantity: 2
- Clamps Included: Yes
- Vehicle Segment: Truck
- Tail Pipe Tapered Outlet: No
- Bolt-On Yes/No: Yes
- Profile: Street Profile
- Exhaust Tip Length: 12
- Exhaust Tip Intercooled: No
- Muffler Finish: Polished
- Inlet Type: Bolt-on
- UPS Able: Yes
- Prop 65 (C, R or CR): Cr
- Tubing Diameter: 4 Inch
- Exhaust Tip Cut: Angled
- Exhaust Tip Connection: Bolt-on
- Hangers Included: Yes
- Exit Style:
- Dual Side Exit
- Dual Split Side
- Cutting Required: Cutting May Be Required
- Main Piping Diameter: 4
- Clamping Type: Round Band
- Gasket Or Seal Included: No
- Exhaust Tip Resonated: No
- Muffler Yes/No: Yes
- Muffler Body Material: Aluminized Steel
- Muffler Body Shape: Round
- Tip Shape: Round
- MBRP Series: Armor Lite
- Exhaust Tip Diameter: 5
- Pipe Material: Aluminized Steel
- Exhaust Tip Finish: Polished
-
Features:
- Heavy Duty Aluminized Steel, Fully Sealed Seams for Rust Resistance. Bolt-on Installation. MBRP Signature Styling and Sound.
- THE BEST BANG FOR YOUR BUCK - ARMOR LITE Series exhaust systems are a value option with the same fitment, performance and sound as the premium products from MBRP. Heavy-gauge Aluminized Steel tubing helps to resist dings and dents caused by debris under your vehicle. This material can be a great choice for you if you live in a dry climate that doesn’t see much precipitation, or if you’re looking for great sound on a budget. All of the tubing is mandrel bent for maximum exhaust flow. Mandrel bending ensures no rippling in the bends. The end result is that it gives you more fresh air inside your engine’s cylinders, allowing it to produce more power and improve vehicle performance and longevity. MBRP, Stand out from the crowd with a performance exhaust system that sounds great.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Bed Length | CID |
|---|---|---|---|---|---|
| 2002 - Ford F-250 Super Duty | V | - | 10 Cyl 6.8L | 81.0 | 415 |
- 4in. Cat-Back. Single Side Exit. AL
- 4in. Cat-Back. Single Side Exit. Aluminized Steel.
- MBRP Armor Lite 4 Inch Cat Back Single Side Exit with Polished Tip
- Product Attributes:
- Exhaust Tip Wall: Single
- Major: Performance Gas
- Tail Pipe Quantity: 1
- Exhaust Tip Edge: Rolled End
- Exhaust Tip Quantity: 1
- Fuel Type: Gasoline
- Muffler Flanged Inlet: No
- Minor: Single
- Tail Pipe Outlet Outside Diameter: 4
- Exhaust Tip Material: Stainless Steel
- Muffler Quantity: 1
- Muffler Outlet Quantity: 1
- Clamps Included: Yes
- Vehicle Segment: Truck
- Tail Pipe Tapered Outlet: No
- Bolt-On Yes/No: Yes
- Profile: Tour Profile
- Exhaust Tip Length: 12
- Exhaust Tip Intercooled: No
- Muffler Finish: Polished
- Inlet Type: Bolt-on
- UPS Able: Yes
- Prop 65 (C, R or CR): Cr
- Tubing Diameter: 4 Inch
- Exhaust Tip Cut: Angled
- Exhaust Tip Connection: Bolt-on
- Hangers Included: Yes
- Exit Style:
- Single Side
- Single Side Exit
- Cutting Required: Cutting May Be Required
- Main Piping Diameter: 4
- Clamping Type: Round Band
- Gasket Or Seal Included: No
- Exhaust Tip Resonated: No
- Muffler Yes/No: Yes
- Muffler Body Material: Aluminized Steel
- Muffler Body Shape: Round
- Tip Shape: Round
- MBRP Series: Armor Lite
- Exhaust Tip Diameter: 5
- Pipe Material: Aluminized Steel
- Exhaust Tip Finish: Polished
-
Features:
- Heavy Duty Aluminized Steel, Fully Sealed Seams for Rust Resistance. Bolt-on Installation. MBRP Signature Styling and Sound.
- THE BEST BANG FOR YOUR BUCK - ARMOR LITE Series exhaust systems are a value option with the same fitment, performance and sound as the premium products from MBRP. Heavy-gauge Aluminized Steel tubing helps to resist dings and dents caused by debris under your vehicle. This material can be a great choice for you if you live in a dry climate that doesn’t see much precipitation, or if you’re looking for great sound on a budget. All of the tubing is mandrel bent for maximum exhaust flow. Mandrel bending ensures no rippling in the bends. The end result is that it gives you more fresh air inside your engine’s cylinders, allowing it to produce more power and improve vehicle performance and longevity. MBRP, Stand out from the crowd with a performance exhaust system that sounds great.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Bed Length | CID |
|---|---|---|---|---|---|
| 2002 - Ford F-250 Super Duty | V | - | 10 Cyl 6.8L | 81.0 | 415 |
- 4in. Turbo Back. Single Side Exit. T304
- Not For Use In Vehicles Equipped With Catalytic Converter
- 4in. Turbo Back. Single Side Exit. T304 Stainless Steel.
- MBRP Armor Pro 4 Inch Turbo Back Single Side Exit with Polished Tip
- Product Attributes:
- Exhaust Tip Wall: Dual
- Major: Diesel
- Tail Pipe Quantity: 1
- Exhaust Tip Edge: Straight
- Exhaust Tip Quantity: 1
- Fuel Type: Diesel
- Muffler Flanged Inlet: No
- Minor: Single
- Tail Pipe Outlet Outside Diameter: 4
- Exhaust Tip Material: Stainless Steel
- Muffler Quantity: 1
- Muffler Body Length: 22.5
- Muffler Outlet Quantity: 1
- Clamps Included: Yes
- Vehicle Segment: Truck
- Muffler Flanged Outlet: No
- Tail Pipe Tapered Outlet: No
- Bolt-On Yes/No: Yes
- Muffler Body Height: 6
- Profile: Street Profile
- Exhaust Tip Length: 12
- Exhaust Tip Intercooled: No
- Muffler Finish: Polished
- Muffler Outlet Connection: Slip-fit
- Inlet Type: Slip-on
- UPS Able: Yes
- Muffler Inlet Connection: Slip-fit
- Prop 65 (C, R or CR): Cr
- Tubing Diameter: 4 Inch
- Exhaust Tip Cut: Straight
- Exhaust Tip Connection: Slip-on
- Hangers Included: Yes
- Exit Style:
- Single Side
- Single Side Exit
- Muffler Body Width: 6
- Cutting Required: Cutting May Be Required
- Main Piping Diameter: 4
- Clamping Type: Round Band
- Exhaust Tip Resonated: No
- Muffler Yes/No: Yes
- Exhaust Tip Shape: Round
- Muffler Body Material: T304 Stainless Steel
- Muffler Body Shape: Round
- Tip Shape: Round
- MBRP Series: Armor Pro
- Exhaust Tip Diameter: 5
- Pipe Material: T304 Stainless Steel
- Exhaust Tip Finish: Polished
-
Features:
- Durable T304 Stainless Steel Construction. Easy to Clean and Maintain. Bolt-on Installation. MBRP Signature Styling and Sound.
- THE ONLY EXHAUST YOU"LL EVER NEED - MBRP Armor Pro Series exhaust systems are backed by a Lifetime Warranty and crafted out of T304 Stainless Steel - the most durable material grade that money can buy. The T304 Stainless Steel tubing is easy to clean and maintain. It’s the obvious choice for you if you operate your vehicle in extreme conditions. All of the tubing is mandrel bent for maximum exhaust flow. Mandrel bending ensures no rippling in the bends. The end result is that it gives you more fresh air inside your engine’s cylinders, allowing it to produce more power and improve vehicle performance and longevity. MBRP, Stand out from the crowd with a performance exhaust system that sounds great.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Bed Length | CID |
|---|---|---|---|---|---|
| 2002 - Ford F-250 Super Duty | V | - | 8 Cyl 7.3L | 81.0 | 445 |
Showing 1 - 10 of 16 products
Loading...