2010 Toyota FJ Cruiser Exhaust System Kit Parts
Choose your Engine for your 2010 Toyota FJ Cruiser
Image
Product
Price
- Single Straight Passenger Side Rear Exit
- Street Series Stainless Cat-Back System
- Street Series Stainless Cat-Back System
- Product Attributes:
- Muffler Type: Straight-through
- Hangers Included: Yes
- Tip Finish: Polished
- Exit Style: Single Straight Passenger Side Rear
- Tip Length: 8.25
- Tip Type: Welded-on;double Wall;angle Cut;rolled Edge
- Mounting Bracket Included: No
- Subtitle: Cat-back
- Main Piping Diameter: 2.5
- Tip Diameter: 3.75 X 4.75
- Muffler Finish: Satin
- Valve Included: No
- Muffler Size: 5x11x22
- Tip Shape: Oval
- Clamp Type: Band Clamp
- Inlet Connection Type: Bolt-on
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2010 - Toyota FJ Cruiser | V | 3956 | 6 Cyl 4.0L | 241 |
- 3 in. Tubing; Single Dump Style Exit; 409 Stainless Steel; Includes Installation Hardware;50 State Legal / California Emissions Compliant
- FlowFX Extreme Cat-Back Exhaust System; 3 in. Tubing; Single Dump Style Exit; 409 Stainless Steel; Includes Installation Hardware;
- FlowFX Extreme Cat-Back Exhaust System
- Product Attributes:
- Exhaust Type: Cat-back
- Exit Position: Single Out Dump
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Muffler Body Length: 14.000 In.
-
Features:
- Offers a Deep Powerful Sound And Increased Performance
- Includes All Necessary Hardware For An At Home Installation
- Dump Style Exit Allows For Better Ground Clearance When In Extreme Off-Road Conditions
- Uses Factory Hanger Locations For Easy Installation
- Lifetime Limited Warranty
- Flowmaster introduces our FlowFX Extreme stainless steel cat-back exhaust system for the 2007-2014 Toyota FJ Cruiser with the 4.0-liter engine. This system uses a FlowFX series muffler for an aggressive to moderate sound level and increased performance. 3.00-inch mandrel bent 409 stainless steel tubing allows for maximum exhaust flow and durability. The system has a turndown style, dump exit right after the muffler to eliminate the over-axle tailpipe. This elimination of the tailpipe helps improve ground clearance and departure angle when you are driving in more extreme off-road situations. All of the necessary hardware is included, and factory-mounting locations are used for an easy installation. Backed by Flowmasters Lifetime Limited Warranty.
Additional Fitment Information:
| Vehicle |
|---|
| 2010 - Toyota FJ Cruiser |
- 2.5 in.; Includes Ext. Pipe/Muffler/Over Axle Pipe/Tailpipe/Hardware/3.75 in. OD Tip; Single Rear Exit; Aluminized;Meets EPA Standards
- Armor Lite Cat Back Exhaust System; 2.5 in.; Includes Ext. Pipe/Muffler/Over Axle Pipe/Tailpipe/Hardware/3.75 in. OD Tip; Single Rear Exit; Aluminized;
- Armor Lite Cat Back Exhaust System
- Product Attributes:
- Tail Pipe Diameter: 2.500 In.
- Tubing Diameter: 2.500 In.
- Exhaust Type:
- Cat-back
- Single
- Muffler Type: Straight-through
- Exit Position: Single Rear
- Tip Diameter: 3.750 In.
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: This Product Can Expose You To Chemicals Including Nickel (metallic) And Chromium (hexavalent Compounds) Which Are Known To The State Of California To Cause Cancer And Birth Defects; Or Other Reproductive Harm
- Exit Style: Straight
- Inlet Inside Diameter: 2.500 In.
- Outlet Outside Diameter: 2.500 In.
-
Features:
- Improved Torque And Horsepower
- Lower Exhaust Gas Temperatures
- Increased Throttle Response
- Mellow Exhaust Note
- Bolt On Design
- Utilizes OEM Hangers
- Stainless Steel Tips Are Included
- 3 Year Warranty
- THE BEST BANG FOR YOUR BUCK - ARMOR LITE Series exhaust systems are a value option with the same fitment, performance and sound as the premium products from MBRP. Heavy-gauge Aluminized Steel tubing helps to resist dings and dents caused by debris under your vehicle. This material can be a great choice for you if you live in a dry climate that doesn't see much precipitation, or if you're looking for great sound on a budget. All of the tubing is mandrel bent for maximum exhaust flow. Mandrel bending ensures no rippling in the bends. The end result is that it gives you more fresh air inside your engine's cylinders, allowing it to produce more power and improve vehicle performance and longevity. MBRP, Stand out from the crowd with a performance exhaust system that sounds great.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2010 - Toyota FJ Cruiser | V | 3956 | 6 Cyl 4.0L | 241 |
- 2.5 in.; Includes Ext. Pipe/Muffler/Over Axle Pipe/Tailpipe/Hardware/Off Road Tailpipe; No Tip; Single Rear Exit; Aluminized;Meets EPA Standards No Tip Needed
- Armor Lite Cat Back Exhaust System; 2.5 in.; Includes Ext. Pipe/Muffler/Over Axle Pipe/Tailpipe/Hardware/Off Road Tailpipe; No Tip; Single Rear Exit; Aluminized;
- Armor Lite Cat Back Exhaust System
- Product Attributes:
- Tail Pipe Diameter: 2.500 In.
- Tubing Diameter: 2.500 In.
- Exhaust Type:
- Cat-back
- Single
- Muffler Type: Straight-through
- Exit Position: Single Rear
- Tip Diameter: N/a
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: This Product Can Expose You To Chemicals Including Nickel (metallic) And Chromium (hexavalent Compounds) Which Are Known To The State Of California To Cause Cancer And Birth Defects; Or Other Reproductive Harm
- Exit Style: Straight
- Inlet Inside Diameter: 2.500 In.
- Outlet Outside Diameter: 2.500 In.
-
Features:
- Improved Torque And Horsepower
- Lower Exhaust Gas Temperatures
- Increased Throttle Response
- Mellow Exhaust Note
- Bolt On Design
- Utilizes OEM Hangers
- Stainless Steel Tips Are Included
- 3 Year Warranty
- THE BEST BANG FOR YOUR BUCK - ARMOR LITE Series exhaust systems are a value option with the same fitment, performance and sound as the premium products from MBRP. Heavy-gauge Aluminized Steel tubing helps to resist dings and dents caused by debris under your vehicle. This material can be a great choice for you if you live in a dry climate that doesn't see much precipitation, or if you're looking for great sound on a budget. All of the tubing is mandrel bent for maximum exhaust flow. Mandrel bending ensures no rippling in the bends. The end result is that it gives you more fresh air inside your engine's cylinders, allowing it to produce more power and improve vehicle performance and longevity. MBRP, Stand out from the crowd with a performance exhaust system that sounds great.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2010 - Toyota FJ Cruiser | V | 3956 | 6 Cyl 4.0L | 241 |
- 2.5 in.; Includes Ext. Pipe/Muffler/Over Axle Pipe/Tailpipe/Hardware/Off Road Tailpipe; No Tip; Single Rear Exit; T409 Stainless Steel;Meets EPA Standards No Tip Needed
- Armor Plus Cat Back Exhaust System; 2.5 in.; Includes Ext. Pipe/Muffler/Over Axle Pipe/Tailpipe/Hardware/Off Road Tailpipe; No Tip; Single Rear Exit; T409 Stainless Steel;
- Armor Plus Cat Back Exhaust System
- Product Attributes:
- Tail Pipe Diameter: 2.500 In.
- Tubing Diameter: 2.500 In.
- Exhaust Type:
- Cat-back
- Single
- Muffler Type: Straight-through
- Exit Position: Single Side
- Tip Diameter: N/a
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: This Product Can Expose You To Chemicals Including Nickel (metallic) And Chromium (hexavalent Compounds) Which Are Known To The State Of California To Cause Cancer And Birth Defects; Or Other Reproductive Harm
- Exit Style: Straight
- Inlet Inside Diameter: 2.500 In.
-
Features:
- Improved Torque And Horsepower
- Lower Exhaust Gas Temperatures
- Increased Throttle Response
- Mellow Exhaust Note
- Bolt On Design
- Utilizes OEM Hangers
- Stainless Steel Tips Are Included
- Limited Lifetime Warranty
- RELIABILITY BACKED FOR A LIFETIME - ARMOR PLUS Series exhaust systems are crafted from corrosion-resistant T409 Stainless Steel - a value-oriented material designed to protect from penetrating rust and will stand up to almost anything you can throw at it.T409 Stainless Steel tubing is easy to clean. If you're looking for a performance exhaust system with a Lifetime Warranty, this is probably the one for you. If you don't find yourself faced with lots of precipitation and salt, this is all you're ever going to need. All of the tubing is mandrel bent for maximum exhaust flow. Mandrel bending ensures no rippling in the bends. The end result is that it gives you more fresh air inside your engine's cylinders, allowing it to produce more power and improve vehicle performance and longevity. Its important to note that T409 Stainless Steel is resistant to penetrating rust but winter conditions, heavy salt air, and road treatments might accelerate the corrosion process, these conditions are not covered by MBRPs manufacturer warranty unless the part or system fails completely. When it comes to a performance exhaust system, choose the MBRP ARMOR PLUS Series for a reliable option backed for a lifetime. MBRP, Stand out from the crowd with a performance exhaust system that sounds great.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2010 - Toyota FJ Cruiser | V | 3956 | 6 Cyl 4.0L | 241 |
- Armor Lite Cat Back Exhaust System
- 2.5 in.; Includes Ext. Pipe/Muffler/Over Axle Pipe/Tailpipe/Hardware/3.75 in. OD Tip; Single Rear Exit; Aluminized
- Armor Lite Cat Back Exhaust System; 2.5 in.; Includes Ext. Pipe/Muffler/Over Axle Pipe/Tailpipe/Hardware/3.75 in. OD Tip; Single Rear Exit; Aluminized;
- Installer Series Cat Back Exhaust System
- Product Attributes:
- Tail Pipe Diameter: 2.500 In.
- Tubing Diameter: 2.500 In.
- Exhaust Type:
- Cat-back
- Single
- Muffler Type: Straight-through
- Exit Position: Single Rear
- Tip Diameter: 3.750 In.
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message:
- Warning: This Product Can Expose You To Chemicals Including Nickel (metallic) And Chromium (hexavalent Compounds) Which Are Known To The State Of California To Cause Cancer And Birth Defects; Or Other Reproductive Harm
- Warning: This Product Can Expose You To Chemicals Including Nickel (metallic) And Chromium (hexavalent Compounds) Which Are Known To The State Of California To Cause Cancer And Birth Defects; Or Other Reproductive Harm - Www.p65warnings.ca.gov
- Exit Style: Straight
- Inlet Inside Diameter: 2.500 In.
- Outlet Outside Diameter:
- 2.500 In.
- 3.750 In.
-
Features:
- Improved Torque And Horsepower
- Lower Exhaust Gas Temperatures
- Increased Throttle Response
- Mellow Exhaust Note
- Bolt On Design
- Utilizes OEM Hangers
- Stainless Steel Tips Are Included
- 3 Year Warranty
- THE BEST BANG FOR YOUR BUCK - ARMOR LITE Series exhaust systems are a value option with the same fitment, performance and sound as the premium products from MBRP. Heavy-gauge Aluminized Steel tubing helps to resist dings and dents caused by debris under your vehicle. This material can be a great choice for you if you live in a dry climate that doesn't see much precipitation, or if you're looking for great sound on a budget. All of the tubing is mandrel bent for maximum exhaust flow. Mandrel bending ensures no rippling in the bends. The end result is that it gives you more fresh air inside your engine's cylinders, allowing it to produce more power and improve vehicle performance and longevity. MBRP, Stand out from the crowd with a performance exhaust system that sounds great.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2010 - Toyota FJ Cruiser | V | 3956 | 6 Cyl 4.0L | 241 |
- Armor Lite Cat Back Exhaust System
- 2.5 in.; Includes Ext. Pipe/Muffler/Over Axle Pipe/Tailpipe/Hardware/Off Road Tailpipe; No Tip; Single Rear Exit; Aluminized;Off Road Use Only No Tip Needed
- Armor Lite Cat Back Exhaust System; 2.5 in.; Includes Ext. Pipe/Muffler/Over Axle Pipe/Tailpipe/Hardware/Off Road Tailpipe; No Tip; Single Rear Exit; Aluminized;
- Installer Series Cat Back Exhaust System
- Product Attributes:
- Tail Pipe Diameter: 2.500 In.
- Tubing Diameter: 2.500 In.
- Exhaust Type:
- Cat-back
- Single
- Muffler Type: Straight-through
- Exit Position: Single Rear
- Tip Diameter: N/a
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message:
- Warning: This Product Can Expose You To Chemicals Including Nickel (metallic) And Chromium (hexavalent Compounds) Which Are Known To The State Of California To Cause Cancer And Birth Defects; Or Other Reproductive Harm
- Warning: This Product Can Expose You To Chemicals Including Nickel (metallic) And Chromium (hexavalent Compounds) Which Are Known To The State Of California To Cause Cancer And Birth Defects; Or Other Reproductive Harm - Www.p65warnings.ca.gov
- Exit Style: Straight
- Inlet Inside Diameter: 2.500 In.
- Outlet Outside Diameter: 2.500 In.
-
Features:
- Improved Torque And Horsepower
- Lower Exhaust Gas Temperatures
- Increased Throttle Response
- Mellow Exhaust Note
- Bolt On Design
- Utilizes OEM Hangers
- Stainless Steel Tips Are Included
- 3 Year Warranty
- THE BEST BANG FOR YOUR BUCK - ARMOR LITE Series exhaust systems are a value option with the same fitment, performance and sound as the premium products from MBRP. Heavy-gauge Aluminized Steel tubing helps to resist dings and dents caused by debris under your vehicle. This material can be a great choice for you if you live in a dry climate that doesn't see much precipitation, or if you're looking for great sound on a budget. All of the tubing is mandrel bent for maximum exhaust flow. Mandrel bending ensures no rippling in the bends. The end result is that it gives you more fresh air inside your engine's cylinders, allowing it to produce more power and improve vehicle performance and longevity. MBRP, Stand out from the crowd with a performance exhaust system that sounds great.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2010 - Toyota FJ Cruiser | V | 3956 | 6 Cyl 4.0L | 241 |
- Armor Plus Cat Back Exhaust System
- 2.5 in.; Includes Ext. Pipe/Muffler/Over Axle Pipe/Tailpipe/Hardware/Off Road Tailpipe; No Tip; Single Rear Exit; T409 Stainless Steel;Off Road Use Only No Tip Needed
- Armor Plus Cat Back Exhaust System; 2.5 in.; Includes Ext. Pipe/Muffler/Over Axle Pipe/Tailpipe/Hardware/Off Road Tailpipe; No Tip; Single Rear Exit; T409 Stainless Steel;
- XP Series Cat Back Exhaust System
- Product Attributes:
- Tail Pipe Diameter: 2.500 In.
- Tubing Diameter: 2.500 In.
- Exhaust Type:
- Cat-back
- Single
- Muffler Type: Straight-through
- Exit Position: Single Side
- Tip Diameter: N/a
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message:
- Warning: This Product Can Expose You To Chemicals Including Nickel (metallic) And Chromium (hexavalent Compounds) Which Are Known To The State Of California To Cause Cancer And Birth Defects; Or Other Reproductive Harm
- Warning: This Product Can Expose You To Chemicals Including Nickel (metallic) And Chromium (hexavalent Compounds) Which Are Known To The State Of California To Cause Cancer And Birth Defects; Or Other Reproductive Harm - Www.p65warnings.ca.gov
- Exit Style: Straight
- Inlet Inside Diameter: 2.500 In.
-
Features:
- Improved Torque And Horsepower
- Lower Exhaust Gas Temperatures
- Increased Throttle Response
- Mellow Exhaust Note
- Bolt On Design
- Utilizes OEM Hangers
- Stainless Steel Tips Are Included
- Limited Lifetime Warranty
- RELIABILITY BACKED FOR A LIFETIME - ARMOR PLUS Series exhaust systems are crafted from corrosion-resistant T409 Stainless Steel - a value-oriented material designed to protect from penetrating rust and will stand up to almost anything you can throw at it.T409 Stainless Steel tubing is easy to clean. If you're looking for a performance exhaust system with a Lifetime Warranty, this is probably the one for you. If you don't find yourself faced with lots of precipitation and salt, this is all you're ever going to need. All of the tubing is mandrel bent for maximum exhaust flow. Mandrel bending ensures no rippling in the bends. The end result is that it gives you more fresh air inside your engine's cylinders, allowing it to produce more power and improve vehicle performance and longevity. Its important to note that T409 Stainless Steel is resistant to penetrating rust but winter conditions, heavy salt air, and road treatments might accelerate the corrosion process, these conditions are not covered by MBRPs manufacturer warranty unless the part or system fails completely. When it comes to a performance exhaust system, choose the MBRP ARMOR PLUS Series for a reliable option backed for a lifetime. MBRP, Stand out from the crowd with a performance exhaust system that sounds great.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2010 - Toyota FJ Cruiser | V | 3956 | 6 Cyl 4.0L | 241 |
Showing 1 - 8 of 8 products
Loading...