2013 Dodge Challenger Exhaust System Kit Parts
Choose your Submodel for your 2013 Dodge Challenger
Image
Product
Price
- Quad Split Rear Exit Round Tips
- Street Series Stainless Cat-Back System
- Street Series Stainless Cat-Back System
- Product Attributes:
- Main Piping Diameter: 2.5
- Muffler Type: Straight-through
- Tip Diameter: 3.5
- Muffler Finish: Satin
- Exit Style: Quad Split Rear
- Tip Length: 5.5
- Tip Type: Welded;double Wall;angle Cut;folded Edge
- Muffler Quantity: 4
- Inlet Connection Type: Clamp-on
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2013 - Dodge Challenger | V | - | 8 Cyl 5.7L | 345 |
- ; Quad Split Rear Exit Rectangle Tips
- Street Series Stainless Cat-Back System
- Street Series Stainless Cat-Back System
- Product Attributes:
- Main Piping Diameter: 2.5
- Muffler Type: Straight-through
- Tip Diameter: 2.375 X 7.75
- Muffler Finish: Satin
- Tip Shape: Square
- Exit Style: Quad Split Rear
- Tip Length: 5
- Tip Type: Clamp-on;single Wall;angle Cut;rolled Edge
- Inlet Connection Type: Clamp-on
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2013 - Dodge Challenger | V | - | 8 Cyl 5.7L | 345 |
- Dual; Dual Rear Exit; Includes 3.0 in. Tubing/Super 40 Series(TM) Mufflers/Scavenger X-Pipe/4.0 in. Logo Embossed Stainless Tips;50 State Legal / California Emissions Compliant 409S Stainless Steel
- American Thunder Cat Back Exhaust System; Dual; Dual Rear Exit; Includes 3.0 in. Tubing/Super 40 Series™ Mufflers/Scavenger X-Pipe/4.0 in. Logo Embossed Stainless Tips;
- American Thunder Cat Back Exhaust System
- Product Attributes:
- Tip Quantity: 2
- Exhaust Type: Dual
- Sound Level: Moderate/aggressive
- WARNING CA Proposition 65: Yes
- Exhaust Series: American Thunder
- Heat Shield Attached: No
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Exit Style: Straight
- Muffler Series: Super 40 Series
- Exit Position: Dual Rear
- Muffler Count: 2
- System Type: Cat Back
- Muffler Part Number: Kit Only
-
Features:
- Mandrel Bent 16 Gauge 409 Stainless Tubing
- Includes Hangers And Hardware For Easy Installation
- Dyno Tuned for Maximum Performance
- Premium Flowmaster Quality
- 3 Year Limited Warranty
- Made in the USA
- For the person who is looking for a complete Cat-back dual exhaust system with an aggressive tone. With easy fit in mind, these systems are mandrel bent for maximum performance and include specially selected mufflers. Delivers an aggressive exterior and moderate interior tone and is well suited to the enthusiast owner. Like all Flowmaster systems, the benefits include improved throttle response, power and mileage. Designed for an easy fit, these systems include all necessary parts and hardware for easy installation.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
140296, 16885, 39484, S7102409
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | CID |
|---|---|---|---|---|---|
| 2013 - Dodge Challenger | V | 6424 | 8 Cyl 6.4L | SRT8 | 392 |
- Dual Split Rear Exit Reuse OE Tips
- Competition Series Stainless Cat-Back System
- Competition Series Stainless Cat-Back System
- Product Attributes:
- Main Piping Diameter: 2.5
- Muffler Type: Straight-through
- Muffler Finish: Satin
- Exit Style: Dual Split Rear
- Inlet Connection Type: Clamp-on
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2013 - Dodge Challenger | V | - | 8 Cyl 5.7L | 345 |
- Quad Split Rear Exit Round Tips
- Competition Series Stainless Cat-Back System
- Competition Series Stainless Cat-Back System
- Product Attributes:
- Main Piping Diameter: 3
- Muffler Type: Straight-through
- Tip Diameter: 3.5
- Muffler Finish: Satin
- Exit Style: Quad Split Rear
- Tip Length: 5.5
- Tip Type: Welded;double Wall;angle Cut;folded Edge
- Inlet Connection Type: Clamp-on
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2013 - Dodge Challenger | V | 6424 | 8 Cyl 6.4L | 392 |
- Dual Split Rear Exit Reuse OE Tips
- Competition Series Stainless Cat-Back System
- Competition Series Stainless Cat-Back System
- Product Attributes:
- Main Piping Diameter: 3
- Muffler Type: Straight-through
- Muffler Finish: Satin
- Exit Style: Dual Split Rear
- Inlet Connection Type: Clamp-on
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2013 - Dodge Challenger | V | 6424 | 8 Cyl 6.4L | 392 |
- 3in. Cat-Back. Dual Split Rear Exit. T304
- 3in. Cat-Back. Dual Split Rear Exit. T304 Stainless Steel.
- Armor Pro Cat Back Exhaust System
- Product Attributes:
- Exhaust Tip Wall: Single
- Tail Pipe Quantity: 2
- Exhaust Tip Edge: Straight
- Muffler (Center) Body Width: 8.25
- Tail Pipe Outlet Outside Diameter: 3
- Exhaust Tip Material: Stainless Steel
- Muffler Quantity: 3
- Muffler Body Length: 12.25
- Clamps Included: Yes
- Torque Increase (FTLB): 22
- Muffler Flanged Outlet: No
- Muffler Body Height: 5
- Bolt-On Yes/No: Yes
- Muffler Finish: Polished
- Muffler Outlet Connection: Slip-fit
- Inlet Type: Slip-on
- Muffler (Center) Body Length: 10.75
- Prop 65 (C, R or CR): Cr
- Exhaust Tip Cut: Angled
- Muffler Body Width: 5
- Muffler Yes/No: Yes
- Exhaust Tip Shape: Rectangle
- Exhaust Tip Diameter:
- 2.3
- 8
- Pipe Material: T304 Stainless Steel
- Major: Muscle Car
- Exhaust Tip Quantity: 2
- Fuel Type: Gasoline
- Muffler Flanged Inlet: No
- Minor: Dual
- Muffler (Center) Body Height: 5
- Muffler Outlet Quantity:
- 1
- 2
- Vehicle Segment: Car
- Tail Pipe Tapered Outlet: No
- Profile: Street Profile
- Exhaust Tip Intercooled: No
- Exhaust Tip Length: 8.25
- UPS Able: Yes
- Muffler Inlet Connection: Slip-fit
- Tubing Diameter: 3 Inch
- Exhaust Tip Connection: Slip-on
- Hangers Included: Yes
- Exit Style:
- Dual Split Quad Outlet
- Quad Rear Exit
- Cutting Required: No
- Horsepower Increase (HP): 22
- Main Piping Diameter: 3
- Clamping Type: Round Band
- Exhaust Tip Resonated: No
- Muffler Body Material: T304 Stainless Steel
- Muffler Body Shape: Round
- Tip Shape: Rectangle
- MBRP Series: Armor Pro
- Exhaust Tip Finish: Polished
-
Features:
- Durable T304 Stainless Steel Construction. Easy to Clean and Maintain. Bolt-on Installation. Increased Horsepower and Torque. MBRP Signature Styling and Sound.
- THE ONLY EXHAUST YOU"LL EVER NEED - MBRP Armor Pro Series exhaust systems are backed by a Lifetime Warranty and crafted out of T304 Stainless Steel - the most durable material grade that money can buy. The T304 Stainless Steel tubing is easy to clean and maintain. It’s the obvious choice for you if you operate your vehicle in extreme conditions. All of the tubing is mandrel bent for maximum exhaust flow. Mandrel bending ensures no rippling in the bends. The end result is that it gives you more fresh air inside your engine’s cylinders, allowing it to produce more power and improve vehicle performance and longevity. MBRP, Stand out from the crowd with a performance exhaust system that sounds great.
Additional Fitment Information:
| Vehicle | Block | CC | Fuel Type | Engine | Sub Model | Aspiration | CID |
|---|---|---|---|---|---|---|---|
| 2013 - Dodge Challenger | V | 6424 | GAS | 8 Cyl 6.4L | SRT8 | Naturally Aspirated | 392 |
- 3in. Cat-Back. Dual Split Rear Exit. T409
- 3in. Cat-Back. Dual Split Rear Exit. T409 Stainless Steel.
- Armor Plus Cat Back Exhaust System
- Product Attributes:
- Exhaust Tip Wall: Single
- Tail Pipe Quantity: 2
- Exhaust Tip Edge: Straight
- Tail Pipe Outlet Outside Diameter: 3
- Exhaust Tip Material: Stainless Steel
- Muffler Quantity: 2
- Muffler Body Length: 12.25
- Clamps Included: Yes
- Torque Increase (FTLB): 24
- Muffler Flanged Outlet: No
- Muffler Body Height: 5
- Bolt-On Yes/No: Yes
- Muffler Finish: Polished
- Muffler Outlet Connection: Slip-fit
- Inlet Type: Slip-on
- Prop 65 (C, R or CR): Cr
- Exhaust Tip Cut: Angled
- Muffler Body Width: 5
- Muffler Yes/No: Yes
- Exhaust Tip Shape: Rectangle
- Exhaust Tip Diameter:
- 2.3
- 8
- Pipe Material: T409 Stainless Steel
- Major: Muscle Car
- Exhaust Tip Quantity: 2
- Fuel Type: Gasoline
- Muffler Flanged Inlet: No
- Minor: Dual
- Muffler Outlet Quantity: 1
- Vehicle Segment: Car
- Tail Pipe Tapered Outlet: No
- Profile: Race Profile
- Exhaust Tip Intercooled: No
- Exhaust Tip Length: 8.25
- UPS Able: Yes
- Muffler Inlet Connection: Slip-fit
- Tubing Diameter: 3 Inch
- Exhaust Tip Connection: Slip-on
- Hangers Included: Yes
- Exit Style:
- Dual Split Quad Outlet
- Quad Rear Exit
- Cutting Required: No
- Horsepower Increase (HP): No
- Main Piping Diameter: 3
- Clamping Type: Round Band
- Exhaust Tip Resonated: No
- Muffler Body Material: T409 Stainless Steel
- Muffler Body Shape: Round
- Tip Shape: Rectangle
- MBRP Series: Armor Plus
- Exhaust Tip Finish: Polished
-
Features:
- Rugged T409 Stainless Steel Construction. Bolt-on Installation. Increased Horsepower and Torque. MBRP Signature Styling and Sound.
- RELIABILITY BACKED FOR A LIFETIME - ARMOR PLUS Series exhaust systems are crafted from corrosion-resistant T409 Stainless Steel - a value-oriented material designed to protect from penetrating rust and will stand up to almost anything you can throw at it. T409 Stainless Steel tubing is easy to clean. If you’re looking for a performance exhaust system with a Lifetime Warranty, this is probably the one for you. If you don’t find yourself faced with lots of precipitation and salt, this is all you’re ever going to need. All of the tubing is mandrel bent for maximum exhaust flow. Mandrel bending ensures no rippling in the bends. The end result is that it gives you more fresh air inside your engine’s cylinders, allowing it to produce more power and improve vehicle performance and longevity. It's important to note that T409 Stainless Steel is resistant to penetrating rust but winter conditions, heavy salt air, and road treatments might accelerate the corrosion process, these conditions are not covered by MBRP's manufacturer warranty unless the part or system fails completely. When it comes to a performance exhaust system, choose the MBRP ARMOR PLUS Series for a reliable option backed for a lifetime. MBRP, Stand out from the crowd with a performance exhaust system that sounds great.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | CID |
|---|---|---|---|---|---|
| 2013 - Dodge Challenger | V | - | 8 Cyl 5.7L | R/T Classic | 345 |
- Cat-Back Exhaust System - S-Type
- S-Type Cat-Back Exhaust System For 2009-2014 Dodge Challenger R/T 5.7L V8 Automatic/ Manual Transmission Rear Wheel Drive 2 Door.
- Cat-Back Exhaust System - S-Type - Polished Stainless Steel Tip
- Product Attributes:
- Tip / Outlet Finish: Polished T-304 Stainless Steel
- Tubing Diameter: 2.500 In.
- Exhaust Type: Cat-back System
- Muffler Type: Straight-through
- Grade Type: Performance
- Title Extended: Challenger R/t 2009-2014 Cat-back Exhaust System S-type Part # 140707
- Inlet Inside Diameter: 2.500 In.
- Prop 65 - Long Label: Warning: This Product In The Physical Form It Is Sold Does Not Present A Hazard. However, Operations Including, But Not Limited To Welding, Brazing, Or Thermal Cutting Can Expose You To Chemicals Including Chromium, Nickel, Cobalt, Arsenic, Cadmium And Le
- Tail Pipe Material: Stainless Steel
- Exit Position: Dual Split Rear
- Tip Diameter: 4 In.
- Off Road Use Only: No
- Construction: All Welded
- Prop 65 (C, R or CR): Cr
- This system features our latest engineering techniques to give you robust sound without any "drone". System features a X-Pipe for improved performance and polished T-304 stainless steel tips for sharp appearance. Borla Cat-Back & Axle-Back exhaust systems feature patented straight-through and multi-core technology designed to unleash hidden horsepower. Increased exhaust velocity adds power, driving excitement, fuel economy, and the distinctive Borla Sound of Power respected by motoring enthusiasts everywhere. Each system is built from premium 300-series T-304 stainless steel, superior to T-400 series knockoffs (such as 409), to give you the absolute best in performance and durability. Ultra-smooth mandrel bends ensure maximum flow & power, and precision computer-controlled CNC manufacturing ensures an accurate fit. Best of all, Borla stands behind every system with a Million-Mile Warranty. Just what you'd expect from the world's most experienced (and most winning) exhaust brand.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2013 - Dodge Challenger | V | - | 8 Cyl 5.7L | 345 |
Showing 1 - 9 of 9 products
Loading...