2015 Toyota Tacoma Exhaust System Kit Parts
Choose your Submodel for your 2015 Toyota Tacoma
Image
Product
Price
- Dual; Dual Out Side Exit; Includes 2.5 in. Tubing/4.5 in. Black Ceramic Tip; 409 Stainless Steel;50 State Legal / California Emissions Compliant
- FlowFX Cat-Back Exhaust System; Dual; Dual Out Side Exit; Includes 2.5 in. Tubing/4.5 in. Black Ceramic Tip; 409 Stainless Steel;
- FlowFX Cat-Back Exhaust System
- Product Attributes:
- Tail Pipe Diameter: 4.500 In.
- Tubing Diameter: 2.500 In.
- Exhaust Type: Cat-back
- Exit Position: Dual Out Side
- Tip Diameter: 4.500 In.
- WARNING CA Proposition 65: Yes
- Inlet Inside Diameter: 2.500 In.
- Muffler Body Length: 18.000 In.
-
Features:
- Mandrel Bent Tubing
- Easy Installation
- Limited Lifetime Warranty
- Deep Powerful Tone Inside And Outside The Vehicle
- FlowFX Straight Through Performance
- Our new Flowmaster(R) Flow FX(R) cat-back exhaust system for all 2005-2015 Toyota Tacoma trucks with the 4.0L engine is manufactured using durable 409 stainless steel tubing throughout and features a 2.50-inch inlet pipe leading to a Flow FX "straight-through" muffler for great sound and maximum performance. The dual 2.50-inch mandrel-bent tailpipes exit out the side at an angle behind the rear wheels directing exhaust away from your boat or travel trailer when towing. The system is finished off with a pair of large 4.50-inch diameter black ceramic coated 304S stainless steel tips, giving your truck a custom look that goes hand in hand with that deep performance Flow FX sound. This system uses all the existing factory hanger locations and includes an additional hanger to install the new left side tailpipe. Includes installation instructions and all necessary hardware for an easy installation that you can do at home.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Bed Length | Body | CID |
|---|---|---|---|---|---|---|
| 2015 - Toyota Tacoma | V | 3956 | 6 Cyl 4.0L | 73.5 | Extended Cab Pickup | 241 |
- Round; Single Dump Exit; 3.0 in. Tubing/Outlaw Muffler; Black; 409 Stainless Steel;50 State Legal / California Emissions Compliant
- Outlaw Extreme Cat Back Exhaust System; Round; Single Dump Exit; 3.0 in. Tubing/Outlaw Muffler; Black; 409 Stainless Steel;
- Outlaw Extreme Cat Back Exhaust System
- Product Attributes:
- Exhaust Type: Cat Back
- Exit Position: Single
- WARNING CA Proposition 65: Yes
-
Features:
- Offers a Deep Powerful Sound And Increased Performance
- Uses Factory Hanger Locations For Easy Installation
- Includes All Necessary Hardware For An At Home Installation
- Dump Style Exit
- Lifetime Limited Warranty
- Flowmaster introduces our new Outlaw Extreme stainless steel cat-back exhaust system for the 2005-2015 Toyota Tacoma with the 4.0L engine. This system uses an Outlaw series muffler for a deep powerful sound and increased performance. 3.0-inch mandrel bent 409 stainless steel tubing provides for maximum exhaust flow and durability. The system has a turndown style, dump exit right after the muffler to eliminate the over-axle tailpipe. This elimination of the tailpipe helps to improve ground clearance and departure angle when you are driving in more extreme off-road situations. All of the necessary hardware is included, and factory-mounting locations are used for an easy installation and it's backed by Flowmaster's Lifetime Limited Warranty.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Bed Length | Body | CID |
|---|---|---|---|---|---|---|
| 2015 - Toyota Tacoma | V | 3956 | 6 Cyl 4.0L | 73.5 | Crew Cab Pickup | 241 |
- 2.5in. Cat-Back. Single Turn Down. AL
- Extended Cab and Crew Cab Only.
- 2.5in. Cat-Back. Single Turn Down. Aluminized Steel.
- MBRP Armor Lite 2.5 Inch Cat Back Turn Down
- Product Attributes:
- Exhaust Tip Wall: Single
- Major: Performance Gas
- Tail Pipe Quantity: 1
- Exhaust Tip Edge: Straight
- Exhaust Tip Quantity: 1
- Fuel Type: Gasoline
- Muffler Flanged Inlet: No
- Minor: Single
- Tail Pipe Outlet Outside Diameter: 2.5
- Exhaust Tip Material: Stainless Steel
- Muffler Quantity: 1
- Muffler Outlet Quantity: 1
- Clamps Included: Yes
- Vehicle Segment: Truck
- Muffler Flanged Outlet: No
- Tail Pipe Tapered Outlet: No
- Bolt-On Yes/No: Yes
- Profile: Race Profile
- Exhaust Tip Intercooled: No
- Muffler Finish: Polished
- Muffler Outlet Connection: Slip-fit
- UPS Able: Yes
- Muffler Inlet Connection: Slip-fit
- Prop 65 (C, R or CR): Cr
- Tubing Diameter: 2.5 Inch
- Exhaust Tip Cut: Angled Turndown
- Exhaust Tip Connection: Bolt-on
- Hangers Included: Yes
- Exit Style:
- Single Rear Turndown
- Turndown Exit
- Cutting Required: Cutting May Be Required
- Main Piping Diameter: 2.5
- Clamping Type: Round Band
- Exhaust Tip Resonated: No
- Muffler Yes/No: Yes
- Spring Bolt Kit Included: No
- Muffler Body Material: Aluminized Steel
- Muffler Body Shape: Round
- Tip Shape: Turndown
- MBRP Series: Armor Lite
- Exhaust Tip Diameter: 2.5
- Pipe Material: Aluminized Steel
-
Features:
- Heavy Duty Aluminized Steel, Fully Sealed Tubing for Rust Resistance. Bolt-on Installation. Aggressive Exhaust Tone. MBRP Signature Styling.
- THE BEST BANG FOR YOUR BUCK - ARMOR LITE Series exhaust systems are a value option with the same fitment, performance and sound as the premium products from MBRP. Heavy-gauge Aluminized Steel tubing helps to resist dings and dents caused by debris under your vehicle. This material can be a great choice for you if you live in a dry climate that doesn’t see much precipitation, or if you’re looking for great sound on a budget. All of the tubing is mandrel bent for maximum exhaust flow. Mandrel bending ensures no rippling in the bends. The end result is that it gives you more fresh air inside your engine’s cylinders, allowing it to produce more power and improve vehicle performance and longevity. MBRP, Stand out from the crowd with a performance exhaust system that sounds great.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Bed Length | Sub Model | Body | CID |
|---|---|---|---|---|---|---|---|
| 2015 - Toyota Tacoma | V | 3956 | 6 Cyl 4.0L | 73.5 | TRD Pro | Crew Cab Pickup | 241 |
- 2.5in. Cat-Back. Single Side Exit. T409
- 2.5in. Cat-Back. Single Side Exit. T409 Stainless Steel.
- MBRP Armor Plus 2.5 Inch Cat Back Single Exit with Polished Tip, EC/CC Models
- Product Attributes:
- Exhaust Tip Wall: Single
- Major: Performance Gas
- Tail Pipe Quantity: 1
- Exhaust Tip Edge: Rolled End
- Exhaust Tip Quantity: 2
- Fuel Type: Gasoline
- Muffler Flanged Inlet: No
- Minor: Single
- Tail Pipe Outlet Outside Diameter: 2.5
- Exhaust Tip Material: Stainless Steel
- Muffler Quantity: 1
- Muffler Outlet Quantity: 1
- Clamps Included: Yes
- Vehicle Segment: Truck
- Muffler Flanged Outlet: No
- Tail Pipe Tapered Outlet: No
- Bolt-On Yes/No: Yes
- Profile: Street Profile
- Exhaust Tip Intercooled: No
- Muffler Finish: Polished
- Muffler Outlet Connection: Slip-fit
- UPS Able: Yes
- Muffler Inlet Connection: Slip-fit
- Prop 65 (C, R or CR): Cr
- Tubing Diameter: 2.5 Inch
- Exhaust Tip Cut: Angled
- Exhaust Tip Connection: Bolt-on
- Hangers Included: Yes
- Exit Style:
- Single Side
- Single Side Exit
- Cutting Required: Cutting May Be Required
- Main Piping Diameter: 2.5
- Clamping Type: Round Band
- Exhaust Tip Resonated: No
- Muffler Yes/No: Yes
- Spring Bolt Kit Included: No
- Muffler Body Material: T409 Stainless Steel
- Muffler Body Shape: Round
- Tip Shape: Round
- MBRP Series: Armor Plus
- Exhaust Tip Diameter: 3.5
- Pipe Material: T409 Stainless Steel
- Exhaust Tip Finish: Polished
-
Features:
- Rugged T409 Stainless Steel Construction. Bolt-on Installation. MBRP Signature Styling and Sound.
- RELIABILITY BACKED FOR A LIFETIME - ARMOR PLUS Series exhaust systems are crafted from corrosion-resistant T409 Stainless Steel - a value-oriented material designed to protect from penetrating rust and will stand up to almost anything you can throw at it. T409 Stainless Steel tubing is easy to clean. If you’re looking for a performance exhaust system with a Lifetime Warranty, this is probably the one for you. If you don’t find yourself faced with lots of precipitation and salt, this is all you’re ever going to need. All of the tubing is mandrel bent for maximum exhaust flow. Mandrel bending ensures no rippling in the bends. The end result is that it gives you more fresh air inside your engine’s cylinders, allowing it to produce more power and improve vehicle performance and longevity. It's important to note that T409 Stainless Steel is resistant to penetrating rust but winter conditions, heavy salt air, and road treatments might accelerate the corrosion process, these conditions are not covered by MBRP's manufacturer warranty unless the part or system fails completely. When it comes to a performance exhaust system, choose the MBRP ARMOR PLUS Series for a reliable option backed for a lifetime. MBRP, Stand out from the crowd with a performance exhaust system that sounds great.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Bed Length | CID |
|---|---|---|---|---|---|
| 2015 - Toyota Tacoma | V | 3956 | 6 Cyl 4.0L | 60.3 | 241 |
- 2.5in. Cat-Back. Single Side Exit. AL
- 2.5in. Cat-Back. Single Side Exit. Aluminized Steel.
- MBRP Armor Lite 2.5 Inch Cat Back Single Exit with Polished Tip, EC/CC Models
- Product Attributes:
- Exhaust Tip Wall: Single
- Major: Performance Gas
- Tail Pipe Quantity: 1
- Exhaust Tip Edge: Rolled End
- Exhaust Tip Quantity: 2
- Fuel Type: Gasoline
- Muffler Flanged Inlet: No
- Minor: Single
- Tail Pipe Outlet Outside Diameter: 2.5
- Exhaust Tip Material: Stainless Steel
- Muffler Quantity: 1
- Muffler Outlet Quantity: 1
- Clamps Included: Yes
- Vehicle Segment: Truck
- Muffler Flanged Outlet: No
- Tail Pipe Tapered Outlet: No
- Bolt-On Yes/No: Yes
- Profile: Street Profile
- Exhaust Tip Intercooled: No
- Muffler Finish: Polished
- Muffler Outlet Connection: Slip-fit
- UPS Able: Yes
- Muffler Inlet Connection: Slip-fit
- Prop 65 (C, R or CR): Cr
- Tubing Diameter: 2.5 Inch
- Exhaust Tip Cut: Angled
- Exhaust Tip Connection: Bolt-on
- Hangers Included: Yes
- Exit Style:
- Single Side
- Single Side Exit
- Cutting Required: Cutting May Be Required
- Main Piping Diameter: 2.5
- Clamping Type: Round Band
- Exhaust Tip Resonated: No
- Muffler Yes/No: Yes
- Spring Bolt Kit Included: No
- Muffler Body Material: Aluminized Steel
- Muffler Body Shape: Round
- Tip Shape: Round
- MBRP Series: Armor Lite
- Exhaust Tip Diameter: 3.5
- Pipe Material: Aluminized Steel
- Exhaust Tip Finish: Polished
-
Features:
- Heavy Duty Aluminized Steel, Fully Sealed Tubing for Rust Resistance. Bolt-on Installation. MBRP Signature Styling and Sound.
- THE BEST BANG FOR YOUR BUCK - ARMOR LITE Series exhaust systems are a value option with the same fitment, performance and sound as the premium products from MBRP. Heavy-gauge Aluminized Steel tubing helps to resist dings and dents caused by debris under your vehicle. This material can be a great choice for you if you live in a dry climate that doesn’t see much precipitation, or if you’re looking for great sound on a budget. All of the tubing is mandrel bent for maximum exhaust flow. Mandrel bending ensures no rippling in the bends. The end result is that it gives you more fresh air inside your engine’s cylinders, allowing it to produce more power and improve vehicle performance and longevity. MBRP, Stand out from the crowd with a performance exhaust system that sounds great.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Bed Length | CID |
|---|---|---|---|---|---|
| 2015 - Toyota Tacoma | V | 3956 | 6 Cyl 4.0L | 60.3 | 241 |
- Single Passenger Side Rear Exit
- Magnaflow Street Series Stainless Cat-Back System
- Street Series Stainless Cat-Back System
- Product Attributes:
- Exhaust Tip Wall: Double Wall
- Muffler Type: Straight-through
- Exhaust Tip Edge: Rolled Edge
- Exhaust Tip Quantity: 1
- Exhaust Tip Material: Stainless Steel
- Muffler Quantity: 1
- Muffler Body Length: 18
- Clamps Included: Yes
- Muffler Body Height: 5
- Exhaust Tip Intercooled: No
- Muffler Finish: Brushed
- Valve Included: No
- Exhaust Tip Cut: Angle Cut
- Exhaust Tip Connection: Welded-on
- Hangers Included: Yes
- Exit Style: Single Passenger Side Rear
- Main Piping Diameter: 3
- Clamping Type: Band Clamp
- Exhaust Tip Resonated: No
- Exhaust Tip Shape: Round
- Muffler Body Material: Stainless Steel
- Exhaust Tip Diameter: 4
- Catalytic Converter Quantity: 0
- Pipe Material: Stainless Steel
- Exhaust Tip Finish: Polished
-
Features:
- Dyno-proven performance
- Durable corrosion-resistant stainless steel construction
- CNC precision robotic manufacturing techniques
- The MagnaFlow 2013-2015 Toyota Tacoma Street Series Cat-Back Performance Exhaust System brings out the personality of your 4.0L 2013-2015 Toyota Tacoma with our signature resonant, powerful engine tone and dyno-proven performance. Thanks to its fast-flowing, mandrel bent 3in. main piping and 1 Straight-Through mufflers ending in a Single Passenger Side Rear exit with 4in. Polished Welded-On Double Wall Angle Cut Rolled Edge tips, this Toyota Tacoma exhaust kit has the performance chops to match its sporty sound and appearance. Upgrade your ride to the next level with an exhaust that has the pipes to put other Toyota Tacoma's to shame. With this system your vehicle will be producing Moderate exterior and Mild interior sound levels while leaving other cars and trucks feeling envious at every stoplight. Exhaust kit 15315 features a cat-back layout that replaces your ride's stock exhaust components from near the catalytic converter on back. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 15315 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow's 1-year limited finish warranty and limited lifetime construction warranty.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Bed Length | Body | CID |
|---|---|---|---|---|---|---|
| 2015 - Toyota Tacoma | V | 3956 | 6 Cyl 4.0L | 73.5 | Extended Cab Pickup | 241 |
- Street Series Stainless Cat-Back System
- Single Passenger Side Rear Exit
- Magnaflow Street Series Stainless Cat-Back System
- Product Attributes:
- Exhaust Tip Wall: Double Wall
- Muffler Type: Straight-through
- Exhaust Tip Edge: Rolled Edge
- Exhaust Tip Quantity: 1
- Exhaust Tip Material: Stainless Steel
- Muffler Quantity: 1
- Muffler Body Length: 18
- Clamps Included: Yes
- Muffler Body Height: 5
- Exhaust Tip Intercooled: No
- Muffler Finish: Brushed
- Valve Included: No
- Type: Cat-back
- Series: Street
- Exhaust Tip Cut: Angle Cut
- Exhaust Tip Connection: Welded-on
- Hangers Included: Yes
- Exit Style: Single Passenger Side Rear
- Main Piping Diameter: 3
- Clamping Type: Band Clamp
- Gasket Or Seal Included: No
- Exhaust Tip Resonated: No
- Exhaust Tip Shape: Round
- Prop 65 Y/N: No
- Muffler Body Material: Stainless Steel
- Title: Magnaflow 2013-2015 Toyota Tacoma Street Series Cat-back Performance Exhaust System
- Exhaust Tip Diameter: 4
- Catalytic Converter Quantity: 0
- Pipe Material: Stainless Steel
- Exhaust Tip Finish: Polished
-
Features:
- Durable corrosion-resistant stainless steel construction
- CNC precision robotic manufacturing techniques
- Dyno-proven performance
- The MagnaFlow 2013-2015 Toyota Tacoma Street Series Cat-Back Performance Exhaust System brings out the personality of your 4.0L 2013-2015 Toyota Tacoma with our signature resonant, powerful engine tone and dyno-proven performance. Thanks to its fast-flowing, mandrel bent 3in. main piping and 1 Straight-Through mufflers ending in a Single Passenger Side Rear exit with 4in. Polished Welded-On Double Wall Angle Cut Rolled Edge tips, this Toyota Tacoma exhaust kit has the performance chops to match its sporty sound and appearance. Upgrade your ride to the next level with an exhaust that has the pipes to put other Toyota Tacoma's to shame. With this system your vehicle will be producing Moderate exterior and Mild interior sound levels while leaving other cars and trucks feeling envious at every stoplight. Exhaust kit 15315 features a cat-back layout that replaces your ride's stock exhaust components from near the catalytic converter on back. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 15315 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow's 1-year limited finish warranty and limited lifetime construction warranty.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Bed Length | Body | CID |
|---|---|---|---|---|---|---|
| 2015 - Toyota Tacoma | V | 3956 | 6 Cyl 4.0L | 73.5 | Extended Cab Pickup | 241 |
- 2.5in. Cat-Back. Single Turn Down. T409
- 2.5in. Cat-Back. Single Turn Down. T409 Stainless Steel.
- MBRP Armor Plus 2.5 Inch Cat Back Turn Down
- Product Attributes:
- Exhaust Tip Wall: Single
- Major: Performance Gas
- Tail Pipe Quantity: 1
- Exhaust Tip Edge: Straight
- Exhaust Tip Quantity: 1
- Fuel Type: Gasoline
- Muffler Flanged Inlet: No
- Minor: Single
- Tail Pipe Outlet Outside Diameter: 2.5
- Exhaust Tip Material: Stainless Steel
- Muffler Quantity: 1
- Muffler Outlet Quantity: 1
- Clamps Included: Yes
- Vehicle Segment: Truck
- Muffler Flanged Outlet: No
- Tail Pipe Tapered Outlet: No
- Bolt-On Yes/No: Yes
- Profile: Race Profile
- Exhaust Tip Intercooled: No
- Muffler Finish: Polished
- Muffler Outlet Connection: Slip-fit
- UPS Able: Yes
- Muffler Inlet Connection: Slip-fit
- Prop 65 (C, R or CR): Cr
- Tubing Diameter: 2.5 Inch
- Exhaust Tip Cut: Angled Turndown
- Exhaust Tip Connection: Bolt-on
- Hangers Included: Yes
- Exit Style:
- Single Rear Turndown
- Turndown Exit
- Cutting Required: Cutting May Be Required
- Main Piping Diameter: 2.5
- Clamping Type: Round Band
- Exhaust Tip Resonated: No
- Muffler Yes/No: Yes
- Spring Bolt Kit Included: No
- Muffler Body Material: T409 Stainless Steel
- Muffler Body Shape: Round
- Tip Shape: Turndown
- MBRP Series: Armor Plus
- Exhaust Tip Diameter: 2.5
- Pipe Material: T409 Stainless Steel
-
Features:
- Rugged T409 Stainless Steel Construction. Bolt-on Installation. MBRP Signature Styling and Sound.
- RELIABILITY BACKED FOR A LIFETIME - ARMOR PLUS Series exhaust systems are crafted from corrosion-resistant T409 Stainless Steel - a value-oriented material designed to protect from penetrating rust and will stand up to almost anything you can throw at it. T409 Stainless Steel tubing is easy to clean. If you’re looking for a performance exhaust system with a Lifetime Warranty, this is probably the one for you. If you don’t find yourself faced with lots of precipitation and salt, this is all you’re ever going to need. All of the tubing is mandrel bent for maximum exhaust flow. Mandrel bending ensures no rippling in the bends. The end result is that it gives you more fresh air inside your engine’s cylinders, allowing it to produce more power and improve vehicle performance and longevity. It's important to note that T409 Stainless Steel is resistant to penetrating rust but winter conditions, heavy salt air, and road treatments might accelerate the corrosion process, these conditions are not covered by MBRP's manufacturer warranty unless the part or system fails completely. When it comes to a performance exhaust system, choose the MBRP ARMOR PLUS Series for a reliable option backed for a lifetime. MBRP, Stand out from the crowd with a performance exhaust system that sounds great.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Bed Length | Sub Model | Body | CID |
|---|---|---|---|---|---|---|---|
| 2015 - Toyota Tacoma | V | 3956 | 6 Cyl 4.0L | 73.5 | TRD Pro | Crew Cab Pickup | 241 |
- 2.5in. Cat-Back. Dual Split Side Exit. T409
- 2.5in. Cat-Back. Dual Split Side Exit. T409 Stainless Steel.
- Armor Plus Cat Back Exhaust System
- Product Attributes:
- Exhaust Tip Wall: Single
- Major: Performance Gas
- Tail Pipe Quantity:
- 1
- 2
- Exhaust Tip Edge: Rolled End
- Exhaust Tip Quantity:
- 1
- 2
- Fuel Type: Gasoline
- Muffler Flanged Inlet: No
- Minor: Dual
- Tail Pipe Outlet Outside Diameter: 2.5
- Exhaust Tip Material: Stainless Steel
- Muffler Quantity: 1
- Muffler Outlet Quantity:
- 1
- 2
- Clamps Included: Yes
- Vehicle Segment: Truck
- Muffler Flanged Outlet: No
- Tail Pipe Tapered Outlet: No
- Bolt-On Yes/No: Yes
- Profile: Street Profile
- Exhaust Tip Length: 7
- Exhaust Tip Intercooled: No
- Muffler Finish: Polished
- Muffler Outlet Connection: Slip-fit
- UPS Able: Yes
- Muffler Inlet Connection: Slip-fit
- Prop 65 (C, R or CR): Cr
- Exhaust Tip Cut:
- Angled
- Straight
- Exhaust Tip Connection: Bolt-on
- Hangers Included: Yes
- Exit Style:
- Dual Side
- Dual Side Exit
- Single Side
- Cutting Required: Cutting May Be Required
- Main Piping Diameter: 2.5
- Clamping Type: Round Band
- Exhaust Tip Resonated: No
- Muffler Yes/No: Yes
- Spring Bolt Kit Included: No
- Muffler Body Material: T409 Stainless Steel
- Muffler Body Shape: Round
- Tip Shape: Round
- MBRP Series: Armor Plus
- Exhaust Tip Diameter:
- 3.5
- 3.75
- Pipe Material: T409 Stainless Steel
- Exhaust Tip Finish: Polished
-
Features:
- Rugged T409 Stainless Steel Construction. Bolt-on Installation. MBRP Signature Styling and Sound.
- RELIABILITY BACKED FOR A LIFETIME - ARMOR PLUS Series exhaust systems are crafted from corrosion-resistant T409 Stainless Steel - a value-oriented material designed to protect from penetrating rust and will stand up to almost anything you can throw at it. T409 Stainless Steel tubing is easy to clean. If you’re looking for a performance exhaust system with a Lifetime Warranty, this is probably the one for you. If you don’t find yourself faced with lots of precipitation and salt, this is all you’re ever going to need. All of the tubing is mandrel bent for maximum exhaust flow. Mandrel bending ensures no rippling in the bends. The end result is that it gives you more fresh air inside your engine’s cylinders, allowing it to produce more power and improve vehicle performance and longevity. It's important to note that T409 Stainless Steel is resistant to penetrating rust but winter conditions, heavy salt air, and road treatments might accelerate the corrosion process, these conditions are not covered by MBRP's manufacturer warranty unless the part or system fails completely. When it comes to a performance exhaust system, choose the MBRP ARMOR PLUS Series for a reliable option backed for a lifetime. MBRP, Stand out from the crowd with a performance exhaust system that sounds great.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Bed Length | CID |
|---|---|---|---|---|---|
| 2015 - Toyota Tacoma | V | 3956 | 6 Cyl 4.0L | 73.5 | 241 |
- MACH Force-Xp 2-1/2in 409 Stainless Steel Cat-Back Exhaust System w/Black Tip
- 2.5in. Tubing; Stainless Steel; Includes Clamps/Muffler/Hangers/Sectional Tubing/Hardware/Black Tip; +7hp/+14lbs. x ft of Torque
- MACH Force-Xp 2-1/2in 409 Stainless Steel Cat-Back Exhaust System w/Black Tip Toyota Tacoma 13-15 I4-2.7L
- MACH Force-Xp Cat-Back Exhaust System
- Product Attributes:
- Tail Pipe Material: Stainless Steel
- Tubing Diameter: 2.500 In.
- Exhaust Type: Cat-back
- Exit Position: Rear Side
- Tip Diameter: 2.500 In.
- WARNING CA Proposition 65: Yes
- Exit Style: Turn Out
- Inlet Inside Diameter: 2.500 In.
- Outlet Outside Diameter: 2.500 In.
-
Features:
- Mandrel Bent
- Free Flow System
- Increased Horsepower And Torque
- Increased flow
- Advanced Flow Engineering, Inc. (aFe) produces high flow, high performance air filters & intake systems for the automotive industry. Founded in April, 1999, aFe was created to address an obvious need in the automotive aftermarket industry: a lack of choice for a high performance aftermarket air filter. We are a team of engineers, machinists, production and sales people who believe in the product we design. We each have years of experience in our respective positions and together work to ensure that we have the best product on the market. Our purpose was not just to be another vendor that offers air filters, we chose to pay attention to those finer details that set an aFe filter apart from the competition. We currently offer aftermarket air filters for passenger cars, light trucks and SUVs. We also have many applications for round racing and universal clamp-on filters. To find your particular application, please use our new search engines. If you do not see your particular application listed, please contact us.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Bed Length | Sub Model | CID |
|---|---|---|---|---|---|---|
| 2015 - Toyota Tacoma | L | 2694 | 4 Cyl 2.7L | 60.3 | Base | - |
Showing 1 - 10 of 13 products
Loading...