2019 Chevrolet Corvette Exhaust System Kit Parts
Choose your Submodel for your 2019 Chevrolet Corvette
Image
Product
Price
- Valve-Back
- Dual Rear Exit; 2.75 in. Dia.; Includes RH-LH Muffler Assy/Clamp-On RH-LH Elbow Assy/Hardware Kit/Quad 4.5 in. Polished Black PVD Pro-Series Tips
- 2.75in. Valve-Back Dual Rear Exit with Quad 4.5in. Black PVD Pro-Series Tips
- Xtreme Valve-Back Exhaust System
- Product Attributes:
- Tubing Diameter: 2.750 In.
- Exhaust Type: Single
- Muffler Type: Chambered
- Tip Logo: None
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm Www.p65warnings.ca.gov
- Exit Style: Straight
- Inlet Inside Diameter: 2.750 In.
- Outlet Outside Diameter: 2.750 In.
- Tail Pipe Material: Stainless Steel
- Tail Pipe Diameter: 2.750 In.
- Tip Diameter: N/a
- Exit Position: Dual Rear
- System Type: Rear Section
-
Features:
- Patented No Drone Reflective Sound Cancellation RSC Technology
- Custom Tuned - Aggressive Exhaust Note
- No Drone At Cruise
- 304 Stainless Steel Construction
- Dual Walled Black PVD Stainless Steel Tips
- Flows 20 Percent Better Than Stock
- 4 lbs. Lighter Than Stock
- Easy Bolt-On Installation
- Detailed Printed Instructions Includes Full-Color Available Online
- No Welding Required
- Limited Lifetime Warranty
- Made in the U.S.A.
- CORSAs Patented Reflective Sound Cancellation(R) (RSC) Technology allows acoustic engineers to create a drone free exhaust sound, styled specifically to fit the personality of your vehicle. Each system is designed to increase vehicle performance, deliver an AGGRESSIVE SOUND under acceleration and a DRONE-FREE EXPERIENCE during cruise. Performance gains are not affected by sound choice.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | CID |
|---|---|---|---|---|---|
| 2019 - Chevrolet Corvette | V | 6162 | 8 Cyl 6.2L | ZR1 | 376 |
- Valve-Back
- Dual Rear Exit; 2.75 in. Dia.; Includes RH-LH Muffler Assy/Clamp-On RH-LH Elbow Assy/Hardware Kit/Quad 4.5 in. Polished Black PVD Pro-Series Tips
- 2.75in. Valve-Back Dual Rear Exit with Quad 4.5in. Black PVD Pro-Series Tips
- Xtreme Valve-Back Exhaust System
- Product Attributes:
- Tubing Diameter: 2.750 In.
- Exhaust Type: Single
- Muffler Type: Chambered
- Tip Logo: None
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm Www.p65warnings.ca.gov
- Exit Style: Straight
- Inlet Inside Diameter: 2.750 In.
- Outlet Outside Diameter: 2.750 In.
- Tail Pipe Material: Stainless Steel
- Tail Pipe Diameter: 2.750 In.
- Tip Diameter: N/a
- Exit Position: Dual Rear
- System Type: Rear Section
-
Features:
- Patented No Drone Reflective Sound Cancellation RSC Technology
- Custom Tuned - Aggressive Exhaust Note
- No Drone At Cruise
- 304 Stainless Steel Construction
- Dual Walled Black PVD Stainless Steel Tips
- Flows 20 Percent Better Than Stock
- 4 lbs. Lighter Than Stock
- Easy Bolt-On Installation
- Detailed Printed Instructions Includes Full-Color Available Online
- No Welding Required
- Limited Lifetime Warranty
- Made in the U.S.A.
- CORSAs Patented Reflective Sound Cancellation(R) (RSC) Technology allows acoustic engineers to create a drone free exhaust sound, styled specifically to fit the personality of your vehicle. Each system is designed to increase vehicle performance, deliver an AGGRESSIVE SOUND under acceleration and a DRONE-FREE EXPERIENCE during cruise. Performance gains are not affected by sound choice.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | CID |
|---|---|---|---|---|---|
| 2019 - Chevrolet Corvette | V | 6162 | 8 Cyl 6.2L | ZR1 | 376 |
- Axle-Back Exhaust System - ATAK
- ATAK Axle-Back Exhaust System 2014-2019 Chevrolet Corvette (C7) 6.2L V8 Automatic/ Manual Transmission Rear Wheel Drive 2 Door With AFM Valves With NPP Valves. EXCEPT Grand Sport With Manual Transmission.
- Axle-Back Exhaust System - ATAK - Intercooled Tips - Ceramic Black Stainless Steel Tip
- Product Attributes:
- Tip / Outlet Finish: Ceramic Black On T-304 Stainless Steel
- Tubing Diameter: 2.750 In.
- Exhaust Type: Axle-back System
- Grade Type: Performance
- Title Extended: C7 Corvette Stingray 2014-2019 Axle-back Exhaust System Atak Part # 11856cb
- Prop 65 - Long Label: Warning: This Product In The Physical Form It Is Sold Does Not Present A Hazard. However, Operations Including, But Not Limited To Welding, Brazing, Or Thermal Cutting Can Expose You To Chemicals Including Chromium, Nickel, Cobalt, Arsenic, Cadmium And Le
- Tail Pipe Material: Stainless Steel
- Tail Pipe Diameter: 2.750 In.
- Exit Position: Quad Center
- Off Road Use Only: No
- Construction: All Welded
- Prop 65 (C, R or CR): Cr
-
Features:
- System contains AFM and NPP valves
- EXCEPT Grand Sport models with Manual Transmission
- EXCEPT Grand Sport with Manual Transmission. This Axle-Back system includes both AFM and NPP valves. This system features the aggressive ATAK sound and a durable high-temperature Ceramic Black finish on 4.25" intercooled T-304 stainless steel tips. Polished T-304 stainless steel tips are also available. BORLA Cat-Back & Axle-Back multi-core technology is designed to unleash hidden horsepower. Increased exhaust velocity adds power, driving excitement, fuel economy, and the distinctive BORLA Sound of Power respected by motoring enthusiasts everywhere. Each system is built from premium T-304 stainless steel, superior to T-400 series knockoffs (such as 409), to give you the absolute best in performance and durability. Ultra-smooth mandrel bends ensure maximum flow & power, and precision computer numerical control (CNC) manufacturing ensures an accurate fit. BORLA'S C7 Corvette Axle-Back exhaust systems are covered under our Million-Mile Warranty for non-moving parts, the exhaust valves are warrantied for 1 year. Failures of original equipment AFM and NPP actuators are not covered by the BORLA warranty
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | CID |
|---|---|---|---|---|---|
| 2019 - Chevrolet Corvette | V | 6162 | 8 Cyl 6.2L | Grand Sport | 376 |
- 3in. Axle-Back. Dual Muffler. Dual Rear Exit. Quad CF Tip. T304
- Tuning May Be Required.
- 3in. Axle-Back. Dual Muffler. Dual Rear Exit. Quad Carbon Fiber Tip. T304 Stainless Steel.
- MBRP Armor Pro Axel-Back Exhaust System
- Product Attributes:
- Exhaust Tip Wall: Dual
- Major: Muscle Car
- Tail Pipe Quantity: 4
- Exhaust Tip Edge: Straight
- Exhaust Tip Quantity: 4
- Fuel Type: Gasoline
- Muffler Flanged Inlet: No
- Minor: Dual
- Tail Pipe Outlet Outside Diameter: 3
- Exhaust Tip Material:
- Carbon Fiber
- Stainless Steel
- Muffler Quantity: 2
- Muffler Body Length: 12.5
- Muffler Outlet Quantity: 1
- Clamps Included: Yes
- Torque Increase (FTLB): 13
- Vehicle Segment: Car
- Muffler Flanged Outlet: No
- Tail Pipe Tapered Outlet: No
- Bolt-On Yes/No: Yes
- Muffler Body Height: 6
- Profile: Street Profile
- Exhaust Tip Length: 7.75
- Exhaust Tip Intercooled: No
- Muffler Finish: Polished
- Muffler Outlet Connection: Slip-fit
- UPS Able: Yes
- Muffler Inlet Connection: Slip-fit
- Prop 65 (C, R or CR): Cr
- Tubing Diameter: 3 Inch
- Exhaust Tip Cut: Angled
- Exhaust Tip Connection: Slip-on
- Hangers Included: Yes
- Exit Style:
- Quad Rear
- Quad Rear Exit
- Muffler Body Width: 6
- Cutting Required: No
- Main Piping Diameter: 3
- Clamping Type: Round Band
- Exhaust Tip Resonated: No
- Muffler Yes/No: Yes
- Exhaust Tip Shape: Round
- Muffler Body Material: T304 Stainless Steel
- Muffler Body Shape: Round
- Tip Shape: Round
- MBRP Series: Armor Pro
- Exhaust Tip Diameter: 4
- Pipe Material: T304 Stainless Steel
- Exhaust Tip Finish: Polished
-
Features:
- Classic Muscle Car Sound. T304 Stainless Steel Construction. Increase Throttle Response. Dyno Proven.
- THE ONLY EXHAUST YOU"LL EVER NEED - MBRP Armor Pro Series exhaust systems are backed by a Lifetime Warranty and crafted out of T304 Stainless Steel - the most durable material grade that money can buy. The T304 Stainless Steel tubing is easy to clean and maintain. It’s the obvious choice for you if you operate your vehicle in extreme conditions. All of the tubing is mandrel bent for maximum exhaust flow. Mandrel bending ensures no rippling in the bends. The end result is that it gives you more fresh air inside your engine’s cylinders, allowing it to produce more power and improve vehicle performance and longevity. MBRP, Stand out from the crowd with a performance exhaust system that sounds great.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | CID |
|---|---|---|---|---|---|
| 2019 - Chevrolet Corvette | V | 6162 | 8 Cyl 6.2L | Z06 | 376 |
- 3in. Axle-Back. Dual Muffler. Dual Rear Exit. Quad Tip. T304
- Tuning May Be Required.
- 3in. Axle-Back. Dual Muffler. Dual Rear Exit. Quad Tip. T304 Stainless Steel.
- MBRP Armor Pro Axle-Back Exhaust System
- Product Attributes:
- Exhaust Tip Wall: Dual
- Major: Muscle Car
- Tail Pipe Quantity: 4
- Exhaust Tip Edge: Straight
- Exhaust Tip Quantity: 4
- Fuel Type: Gasoline
- Muffler Flanged Inlet: No
- Minor: Dual
- Tail Pipe Outlet Outside Diameter: 3
- Exhaust Tip Material: Stainless Steel
- Muffler Quantity: 2
- Muffler Body Length: 12.5
- Muffler Outlet Quantity: 1
- Clamps Included: Yes
- Torque Increase (FTLB): 13
- Vehicle Segment: Car
- Muffler Flanged Outlet: No
- Tail Pipe Tapered Outlet: No
- Bolt-On Yes/No: Yes
- Muffler Body Height: 6
- Profile: Street Profile
- Exhaust Tip Length: 7.75
- Exhaust Tip Intercooled: No
- Muffler Finish: Polished
- Muffler Outlet Connection: Slip-fit
- UPS Able: Yes
- Muffler Inlet Connection: Slip-fit
- Prop 65 (C, R or CR): Cr
- Tubing Diameter: 3 Inch
- Exhaust Tip Cut: Angled
- Exhaust Tip Connection: Slip-on
- Hangers Included: Yes
- Exit Style:
- Quad Rear
- Quad Rear Exit
- Muffler Body Width: 6
- Cutting Required: No
- Main Piping Diameter: 3
- Clamping Type: Round Band
- Exhaust Tip Resonated: No
- Muffler Yes/No: Yes
- Exhaust Tip Shape: Round
- Muffler Body Material: T304 Stainless Steel
- Muffler Body Shape: Round
- Tip Shape: Round
- MBRP Series: Armor Pro
- Exhaust Tip Diameter: 4
- Pipe Material: T304 Stainless Steel
- Exhaust Tip Finish: Polished
-
Features:
- Classic Muscle Car Sound. T304 Stainless Steel Construction. Increase Throttle Response. Dyno Proven.
- THE ONLY EXHAUST YOU'LL EVER NEED - MBRP Armor Pro Series exhaust systems are backed by a Lifetime Warranty and crafted out of T304 Stainless Steel - the most durable material grade that money can buy. The T304 Stainless Steel tubing is easy to clean and maintain. It’s the obvious choice for you if you operate your vehicle in extreme conditions. All of the tubing is mandrel bent for maximum exhaust flow. Mandrel bending ensures no rippling in the bends. The end result is that it gives you more fresh air inside your engine’s cylinders, allowing it to produce more power and improve vehicle performance and longevity. MBRP, Stand out from the crowd with a performance exhaust system that sounds great.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | CID |
|---|---|---|---|---|---|
| 2019 - Chevrolet Corvette | V | 6162 | 8 Cyl 6.2L | Z06 | 376 |
- 3in. Axle-Back. Dual Muffler. Dual Rear Exit. Quad Tip. BLK
- Tuning May Be Required.
- 3in. Axle-Back. Dual Muffler. Dual Rear Exit. Quad Tip. Black Coated Aluminized Steel.
- Armor BLK Axle-Back Exhaust System
- Product Attributes:
- Exhaust Tip Wall: Dual
- Major: Muscle Car
- Tail Pipe Quantity: 4
- Exhaust Tip Edge: Straight
- Exhaust Tip Quantity: 4
- Fuel Type: Gasoline
- Muffler Flanged Inlet: No
- Minor: Dual
- Tail Pipe Outlet Outside Diameter: 3
- Exhaust Tip Material: Stainless Steel
- Muffler Quantity: 2
- Muffler Body Length: 12.5
- Muffler Outlet Quantity: 1
- Clamps Included: Yes
- Torque Increase (FTLB): 13
- Vehicle Segment: Car
- Muffler Flanged Outlet: No
- Tail Pipe Tapered Outlet: No
- Bolt-On Yes/No: Yes
- Muffler Body Height: 6
- Profile: Street Profile
- Exhaust Tip Length: 7.75
- Exhaust Tip Intercooled: No
- Muffler Finish: Polished
- Muffler Outlet Connection: Slip-fit
- UPS Able: Yes
- Muffler Inlet Connection: Slip-fit
- Prop 65 (C, R or CR): Cr
- Tubing Diameter: 3 Inch
- Exhaust Tip Cut: Angled
- Exhaust Tip Connection: Slip-on
- Hangers Included: Yes
- Exit Style:
- Quad Rear
- Quad Rear Exit
- Muffler Body Width: 6
- Cutting Required: No
- Main Piping Diameter: 3
- Clamping Type: Round Band
- Exhaust Tip Resonated: No
- Muffler Yes/No: Yes
- Exhaust Tip Shape: Round
- Muffler Body Material: Aluminized Steel
- Muffler Body Shape: Round
- Tip Shape: Round
- MBRP Series: Armor Blk
- Exhaust Tip Diameter: 4
- Pipe Material: Black-coated Aluminized Steel
- Exhaust Tip Finish: Black-coated
-
Features:
- Increased Throttle Response. Classic Muscle Car Sound. Lower Exhaust Gas Temperatures. Improved Horsepower and Torque.
- STYLE THAT'S WORTH A SECOND LOOK - ARMOR BLK Series exhaust systems crank your vehicle’s style dial to 11. The ARMOR BLK series offers the same performance as the other series with an engineered, high-heat black powder coating on the tailpipe(s) and tip(s). Manufactured using heavy-gauge Aluminized Steel tubing throughout the whole system, everything but the tailpipe and tip are left as mill-finish steel for better resistance of damage under your vehicle. This material can be a great choice for you if you live in a dry climate that doesn’t see much precipitation. All of the tubing is mandrel bent for maximum exhaust flow. Mandrel bending ensures no rippling in the bends. The end result is that it gives you more fresh air inside your engine’s cylinders, allowing it to produce more power and improve vehicle performance and longevity. The black powder coating features a 1-year warranty against factory defects, and the remaining parts feature an industry leading 3-year warranty. MBRP, Stand out from the crowd with a performance exhaust system that sounds great.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | CID |
|---|---|---|---|---|---|
| 2019 - Chevrolet Corvette | V | 6162 | 8 Cyl 6.2L | Z06 | 376 |
- Valve-Back
- Dual Rear Exit; 2.75 in. Dia.; Includes RH-LH Muffler Assy/Clamp-On RH-LH Elbow Assy/Hardware Kit/Quad 4.5 in. Polished Pro-Series Tips
- 2.75in. Valve-Back Dual Rear Exit with Quad 4.5in. Polished Pro-Series Tips
- Xtreme Valve-Back Exhaust System
- Product Attributes:
- Tubing Diameter: 2.750 In.
- Exhaust Type: Single
- Muffler Type: Chambered
- Tip Logo: None
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm Www.p65warnings.ca.gov
- Exit Style: Straight
- Inlet Inside Diameter: 2.750 In.
- Outlet Outside Diameter: 2.750 In.
- Tail Pipe Material: Stainless Steel
- Tail Pipe Diameter: 2.750 In.
- Tip Diameter: N/a
- Exit Position: Dual Rear
- System Type: Rear Section
-
Features:
- Patented No Drone Reflective Sound Cancellation RSC Technology
- Custom Tuned - Aggressive Exhaust Note
- No Drone At Cruise
- 304 Stainless Steel Construction
- Dual Walled Polished Stainless Steel Tips
- Flows 20 Percent Better Than Stock
- 4 lbs. Lighter Than Stock
- Easy Bolt-On Installation
- Detailed Printed Instructions Includes Full-Color Available Online
- No Welding Required
- Limited Lifetime Warranty
- Made in the U.S.A.
- CORSAs Patented Reflective Sound Cancellation(R) (RSC) Technology allows acoustic engineers to create a drone free exhaust sound, styled specifically to fit the personality of your vehicle. Each system is designed to increase vehicle performance, deliver an AGGRESSIVE SOUND under acceleration and a DRONE-FREE EXPERIENCE during cruise. Performance gains are not affected by sound choice.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | CID |
|---|---|---|---|---|---|
| 2019 - Chevrolet Corvette | V | 6162 | 8 Cyl 6.2L | ZR1 | 376 |
- Valve-Back
- Dual Rear Exit; 2.75 in. Dia.; Includes RH-LH Muffler Assy/Clamp-On RH-LH Elbow Assy/Hardware Kit/Quad 4.5 in. Polished Pro-Series Tips
- 2.75in. Valve-Back Dual Rear Exit with Quad 4.5in. Polished Pro-Series Tips
- Xtreme Valve-Back Exhaust System
- Product Attributes:
- Tubing Diameter: 2.750 In.
- Exhaust Type: Single
- Muffler Type: Chambered
- Tip Logo: None
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm Www.p65warnings.ca.gov
- Exit Style: Straight
- Inlet Inside Diameter: 2.750 In.
- Outlet Outside Diameter: 2.750 In.
- Tail Pipe Material: Stainless Steel
- Tail Pipe Diameter: 2.750 In.
- Tip Diameter: N/a
- Exit Position: Dual Rear
- System Type: Rear Section
-
Features:
- Patented No Drone Reflective Sound Cancellation RSC Technology
- Custom Tuned - Aggressive Exhaust Note
- No Drone At Cruise
- 304 Stainless Steel Construction
- Dual Walled Polished Stainless Steel Tips
- Flows 20 Percent Better Than Stock
- 4 lbs. Lighter Than Stock
- Easy Bolt-On Installation
- Detailed Printed Instructions Includes Full-Color Available Online
- No Welding Required
- Limited Lifetime Warranty
- Made in the U.S.A.
- CORSAs Patented Reflective Sound Cancellation(R) (RSC) Technology allows acoustic engineers to create a drone free exhaust sound, styled specifically to fit the personality of your vehicle. Each system is designed to increase vehicle performance, deliver an AGGRESSIVE SOUND under acceleration and a DRONE-FREE EXPERIENCE during cruise. Performance gains are not affected by sound choice.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | CID |
|---|---|---|---|---|---|
| 2019 - Chevrolet Corvette | V | 6162 | 8 Cyl 6.2L | ZR1 | 376 |
- Axle-Back Exhaust System - ATAK
- ATAK Axle-Back Exhaust System 2014-2019 Chevrolet Corvette (C7) 6.2L V8 Automatic/ Manual Transmission Rear Wheel Drive 2 Door With AFM Valves With NPP Valves. EXCEPT Grand Sport With Manual Transmission.
- Axle-Back Exhaust System - ATAK - Intercooled Tips - Polished Stainless Steel Tip
- Product Attributes:
- Tip / Outlet Finish: Polished T-304 Stainless Steel
- Tubing Diameter: 2.750 In.
- Exhaust Type: Axle-back System
- Muffler Type: Straight-through
- Grade Type: Performance
- Exit Style: Quad Center Rear Exit
- Title Extended: C7 Corvette Stingray 2014-2019 Axle-back Exhaust System Atak Part # 11856
- Inlet Inside Diameter: 2.750 In.
- Outlet Outside Diameter: 4.250 In.
- Prop 65 - Long Label: Warning: This Product In The Physical Form It Is Sold Does Not Present A Hazard. However, Operations Including, But Not Limited To Welding, Brazing, Or Thermal Cutting Can Expose You To Chemicals Including Chromium, Nickel, Cobalt, Arsenic, Cadmium And Le
- Tail Pipe Diameter: 2.250 In.
- Tail Pipe Material: Stainless Steel
- Exit Position: Rear
- Tip Diameter: 4.250 In.
- Off Road Use Only: No
- System Type: Axle Back
- Construction: All Welded
- Prop 65 (C, R or CR): Cr
-
Features:
- EXCEPT Grand Sport models with Manual Transmission
- System contains AFM and NPP valves
- EXCEPT Grand Sport with Manual Transmission. This Axle-Back system includes both AFM and NPP valves. This system features the aggressive ATAK sound and exits through 4.25" polished intercooled T-304 stainless steel tips. Black coated T-304 stainless steel tips are also available. BORLA Cat-Back & Axle-Back exhaust systems feature patented straight-through and multi-core technology to unleash hidden horsepower. Increased exhaust velocity adds power, driving excitement, fuel economy, and the distinctive BORLA Sound of Power respected by motoring enthusiasts everywhere. Each system is built from premium T-304 stainless steel, superior to T-400 series knockoffs (such as 409), to give you the absolute best in performance and durability. Ultra-smooth mandrel bends ensure maximum flow & power, and precision computer numerical control (CNC) manufacturing ensures an accurate fit. BORLA'S C7 Corvette Axle-Back exhaust systems are covered under our Million-Mile Warranty for non-moving parts, the exhaust valves are warrantied for 1 year. Failures of original equipment AFM and NPP actuators are not covered by the BORLA warranty
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | CID |
|---|---|---|---|---|---|
| 2019 - Chevrolet Corvette | V | 6162 | 8 Cyl 6.2L | ZR1 | 376 |
Showing 1 - 9 of 9 products
Loading...