Image
Product
Price
- 1-Piece Hose
- Flexible Coolant Hose (Standard)
- Product Attributes:
- Molded: No
- Centerline Length:
- 23
- 584
- End 1 Inside Diameter:
- 1.25
- 32
- Material: Epdm, Steel
- End 2 Inside Diameter:
- 1.25
- 32
-
Features:
- Improved sealing surface for greater leak resistance
- High flexibility for easy installation
- Maximum vehicle coverage with minimum inventory
- Resistant to heat, oil and ozone
- Rated for SAE 20R5 Class D-2 performance
- Temperature Range: up to +257 Deg. F (+125 Deg. C)
- Note: Gates recommends replacing clamps each time a new coolant hose is installed
- Caution: Do not use for fuel or oil transfer applications
- Gates Vulco-Flex II coolant hose is a flexible, durable hose designed to bend in almost any direction. Engineered with improved sealing surface for greater leak resistance, this hose easily replicates the angles and planes of a wide variety of expensive OE coolant hoses for quick, easy, and cost-effective replacement.
This Part Fits the Following OEM/Substitute Numbers:
1082A64H05, 1123, 120, 1713902, 232430, 25257, 31615, 3792911, 4026082, 5023, 52023, 524, 553, 557, 596973, 645001181, 67919, 681640...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | Steering System | CID |
|---|---|---|---|---|---|---|---|
| 1986 - Nissan D21 | L | 2389 | Lower | GAS | 4 Cyl 2.4L | Manual | - |
- This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
- Molded
- Pipe to Thermostat
- Lower (pipe to tstat)
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 1986 - Nissan D21 | V | 2960 | Lower | 6 Cyl 3.0L | 181 |
- Molded
- Radiator to Pipe
- Lower - Radiator to Pipe
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | Drive Type | CID |
|---|---|---|---|---|---|---|
| 1986 - Nissan D21 | V | 2960 | Lower | 6 Cyl 3.0L | 4WD | 181 |
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | Drive Type | CID |
|---|---|---|---|---|---|---|
| 1986 - Nissan D21 | V | 2960 | Lower | 6 Cyl 3.0L | RWD | 181 |
Additional Fitment Information:
| Vehicle | Position | Sub Model | Drive Type |
|---|---|---|---|
| 1986 - Nissan D21 | Lower | XE | 4WD |
Additional Fitment Information:
| Vehicle | Position | Sub Model |
|---|---|---|
| 1986 - Nissan D21 | Lower | XE |
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | Steering System | Drive Type | CID |
|---|---|---|---|---|---|---|---|
| 1986 - Nissan D21 | L | 2389 | Lower | 4 Cyl 2.4L | Manual | 4WD | - |
- Flex Hose
- Flex Radiator Hose - 1-1/4"x20", 1 each, sold by each
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | Drive Type | CID |
|---|---|---|---|---|---|---|
| 1986 - Nissan D21 | L | 2389 | Upper | 4 Cyl 2.4L | 4WD | - |
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | Drive Type | CID |
|---|---|---|---|---|---|---|
| 1986 - Nissan D21 | V | 2960 | Lower | 6 Cyl 3.0L | 4WD | 181 |
- Molded
- Radiator to Pipe
- For certain applications, minor trimming may be required for an exact fit.
- Trim-to-Fit
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | Drive Type | CID |
|---|---|---|---|---|---|---|
| 1986 - Nissan D21 | V | 2960 | Lower | 6 Cyl 3.0L | RWD | 181 |
Showing 1 - 10 of 13 products
Loading...