1998 Ford Taurus Radiator Coolant Hose Parts
Choose your Engine for your 1998 Ford Taurus
Image
Product
Price
- Cut to Length, 3"
- Straight Heater Hose (Standard)
- Product Attributes:
- Molded: No
- Working Pressure: 60
- Weight Per Length: 11.70 Lbs./carton
- Centerline Length:
- 15.24
- 15240
- 600
- End 1 Inside Diameter:
- .625
- 16
- Material: Epdm
- End 2 Inside Diameter:
- .625
- 16
-
Features:
- Good resistance to high temperatures for extended periods of time, which prolongs service life
- Meets SAE 20R3 Standard Wall Class D-2 requirements
- Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
- Caution: Do not use for fuel or oil transfer applications
- Get more out of your heater hose with Safety Stripe Heater Hose, constructed for extra-long service life. Intended for use on cars and light trucks, this EPDM hose is unaffected by most coolants, non-oil based coolant additives and high cooling system pressures. (Not recommended for heavy-duty trucks, buses, or off-road construction equipment; use Green Stripe heater hose for these applications.)
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
0K55261B16C, 0K55261B22F, 10023264, 10230417, 10427731, 12322342, 12368235, 12575636, 12600099, 12604941, 12639709, 12639710, 14055JK20A, 15024548, 15051852, 15051853, 15064188, 15064189...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|
| 1998 - Ford Taurus | V | - | Upper - Tee To Water Pump | GAS | 8 Cyl 3.4L | 207 |
- Molded Coolant Hose
- Product Attributes:
- End 3 Inside Diameter: .75
- Branch Quantity: 1
- Modular Components Included: Branch
- Contains Spring: No
- Molded: Yes
- Centerline Length:
- 18.81
- 19
- 478
- End 1 Inside Diameter:
- 1.5
- 38
- Material: Epdm, Plastic
- Modular: Yes
- End 2 Inside Diameter:
- 1.5
- 38
- Quick Connect Fitting Quantity: 0
-
Features:
- Specifically-engineered materials resist collapse under vacuum
- Engineered to resist electrochemical degradation – the leading cause of hose failure
- EPDM tube
- synthetic fiber knit reinforcement, heat-, ozone- and chemical coolant-resistant EPDM cover
- Manufactured with OEM-exact hose components (quick connects, branch connectors/tees, sensors, etc.)
- Meets SAE 20R3 EC Class D1 under 25mm (1 in.) ID, SAE 20R4 EC Class D1 for 25mm (1 in.) ID and over
- Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
- Note: Gates recommends replacing clamps each time a new coolant hose is installed
- Caution: Do not use for fuel or oil transfer applications
- Gates is the Automotive Aftermarket leader in the unique modular assembly coolant hose segment. Gates Modular Coolant Hose is manufactured to fit specific applications and are similar to OEM specifications to include specific essential integrated OE components such as hose branches, quick-connectors, sensors, restrictors, etc.
This Part Fits the Following OEM/Substitute Numbers:
22366M, 22505, 62199, 62289, 71936, 9138, D71936, F7DE 8286 DA, F7DE 8286 EA, F7DE 8286 HA, F7DZ 8286 DA, JF1Z 8286 A, KM-3261, KM-4516, XF12 8B273 AA, XF1Z 8286 AA
Additional Fitment Information:
| Vehicle | Block | CC | Position | Cylinder Head Type | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|---|
| 1998 - Ford Taurus | V | 2986 | Lower | OHV | GAS | 6 Cyl 3.0L | 182 |
- Molded Coolant Hose
- Product Attributes:
- Branch Quantity: 0
- Contains Spring: No
- Molded: Yes
- Centerline Length:
- 22.8
- 579
- End 1 Inside Diameter:
- 1.47
- 37
- Material: Epdm, Plastic
- Modular: No
- End 2 Inside Diameter:
- 1.47
- 37
- Quick Connect Fitting Quantity: 0
-
Features:
- Specifically-engineered materials resist collapse under vacuum
- Engineered to resist electrochemical degradation, the leading cause of hose failure
- Pre-shaped to fit and to ensure perfectly sealed conditions
- EPDM tube
- synthetic fiber knit reinforcement
- heat-, ozone- and chemical coolant-resistant EPDM cover
- Meets requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
- Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
- Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
- Caution: Do not use for fuel or oil transfer applications
- Our Molded Coolant Hoses are manufactured to fit upper, lower, bypass, heater and other coolant applications with OEM-quality specifications, saving you time, money and energy from going to your OE dealer for radiator hose replacements. Gates' molded coolant hose line is the most comprehensive line on the replacement market.
This Part Fits the Following OEM/Substitute Numbers:
22242, 24346L, 62138, 71840, 8882, C2242, E71840, F6DE 8B274 DB, F6DZ 8260 A, KM-3026
Additional Fitment Information:
| Vehicle | Block | CC | Position | Cylinder Head Type | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|---|
| 1998 - Ford Taurus | V | 2986 | Upper | OHV | GAS | 6 Cyl 3.0L | 182 |
- Molded Coolant Hose
- Product Attributes:
- End 3 Inside Diameter: 1.5
- End 4 Inside Diameter: .3
- Contains Spring: No
- End 2 Inside Diameter:
- 1.25
- 32
- Quick Connect Fitting Quantity: 0
- Branch Quantity: 0
- Modular Components Included: 2 Outlets
- Molded: Yes
- Centerline Length:
- 15.37
- 38
- 390
- End 1 Inside Diameter:
- 1.25
- 32
- Material: Epdm, Plastic
- Modular: Yes
-
Features:
- Specifically-engineered materials resist collapse under vacuum
- Engineered to resist electrochemical degradation – the leading cause of hose failure
- EPDM tube
- synthetic fiber knit reinforcement, heat-, ozone- and chemical coolant-resistant EPDM cover
- Manufactured with OEM-exact hose components (quick connects, branch connectors/tees, sensors, etc.)
- Meets SAE 20R3 EC Class D1 under 25mm (1 in.) ID, SAE 20R4 EC Class D1 for 25mm (1 in.) ID and over
- Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
- Note: Gates recommends replacing clamps each time a new coolant hose is installed
- Caution: Do not use for fuel or oil transfer applications
- Gates is the Automotive Aftermarket leader in the unique modular assembly coolant hose segment. Gates Modular Coolant Hose is manufactured to fit specific applications and are similar to OEM specifications to include specific essential integrated OE components such as hose branches, quick-connectors, sensors, restrictors, etc.
This Part Fits the Following OEM/Substitute Numbers:
20379S, 22337, 62292, 71937, 8970, C71937, F6DZ 8584 BD, F6DZ8584BD, R16339
Additional Fitment Information:
| Vehicle | Block | CC | Position | Cylinder Head Type | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|---|
| 1998 - Ford Taurus | V | 2968 | Upper - Tee To Engine | DOHC | GAS | 6 Cyl 3.0L | 181 |
Additional Fitment Information:
| Vehicle | Position | Engine VIN |
|---|---|---|
| 1998 - Ford Taurus | Upper | S |
Additional Fitment Information:
| Vehicle | Position | Cylinder Head Type | Fuel Type |
|---|---|---|---|
| 1998 - Ford Taurus | Lower | OHV | GAS |
Additional Fitment Information:
| Vehicle | Position | Engine VIN |
|---|---|---|
| 1998 - Ford Taurus | Lower | S |
Additional Fitment Information:
| Vehicle | Position | Engine VIN |
|---|---|---|
| 1998 - Ford Taurus | Lower | S |
Additional Fitment Information:
| Vehicle | Position | Engine VIN |
|---|---|---|
| 1998 - Ford Taurus | Upper | S |
Additional Fitment Information:
| Vehicle | Position | Fuel Type |
|---|---|---|
| 1998 - Ford Taurus | Upper | FLEX |
Showing 1 - 10 of 12 products
Loading...