2004 Ford F 150 Radiator Coolant Hose Parts
Choose your Engine for your 2004 Ford F-150
Image
Product
Price
- Molded Coolant Hose
- Product Attributes:
- Branch Quantity: 0
- Contains Spring: No
- Molded: Yes
- Centerline Length:
- 30.3
- 770
- End 1 Inside Diameter:
- 1.75
- 44
- Material: Epdm
- Modular: No
- End 2 Inside Diameter:
- 1.75
- 44
- Quick Connect Fitting Quantity: 0
-
Features:
- Specifically-engineered materials resist collapse under vacuum
- Engineered to resist electrochemical degradation, the leading cause of hose failure
- Pre-shaped to fit and to ensure perfectly sealed conditions
- EPDM tube
- synthetic fiber knit reinforcement
- heat-, ozone- and chemical coolant-resistant EPDM cover
- Meets requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
- Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
- Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
- Caution: Do not use for fuel or oil transfer applications
- Our Molded Coolant Hoses are manufactured to fit upper, lower, bypass, heater and other coolant applications with OEM-quality specifications, saving you time, money and energy from going to your OE dealer for radiator hose replacements. Gates' molded coolant hose line is the most comprehensive line on the replacement market.
This Part Fits the Following OEM/Substitute Numbers:
22863, 26474X, 4L34 8B274 DC, 4L3Z 8260 DA, 62903, 66009, 72248, 7L3Z 8260 A, 9498, E72248, KM 4917, KM-4739
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | Aspiration | CID |
|---|---|---|---|---|---|---|---|
| 2004 - Ford F-150 | V | - | Upper | GAS | 8 Cyl 5.4L | Naturally Aspirated | 330 |
- Molded Coolant Hose
- Product Attributes:
- Branch Quantity: 0
- Contains Spring: No
- Molded: Yes
- Centerline Length:
- 23.7
- 602
- End 1 Inside Diameter:
- 1.5
- 38
- Material: Epdm
- Modular: No
- End 2 Inside Diameter:
- 1.5
- 38
- Quick Connect Fitting Quantity: 0
-
Features:
- Specifically-engineered materials resist collapse under vacuum
- Engineered to resist electrochemical degradation, the leading cause of hose failure
- Pre-shaped to fit and to ensure perfectly sealed conditions
- EPDM tube
- synthetic fiber knit reinforcement
- heat-, ozone- and chemical coolant-resistant EPDM cover
- Meets requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
- Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
- Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
- Caution: Do not use for fuel or oil transfer applications
- Our Molded Coolant Hoses are manufactured to fit upper, lower, bypass, heater and other coolant applications with OEM-quality specifications, saving you time, money and energy from going to your OE dealer for radiator hose replacements. Gates' molded coolant hose line is the most comprehensive line on the replacement market.
This Part Fits the Following OEM/Substitute Numbers:
22859, 26471X, 4L3Z 8286 BC, 62904, 72419, 9494, E72419, KM4738
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | Aspiration | CID |
|---|---|---|---|---|---|---|---|
| 2004 - Ford F-150 | V | - | Lower | GAS | 8 Cyl 5.4L | Naturally Aspirated | 330 |
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2004 - Ford F-150 | Upper |
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2004 - Ford F-150 | Lower |
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2004 - Ford F-150 | Lower |
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2004 - Ford F-150 | Upper |
- Molded Coolant Hose
- Product Attributes:
- End 3 Inside Diameter: .97
- Branch Quantity: 1
- Modular Components Included: Branch
- Contains Spring: No
- Molded: Yes
- Centerline Length:
- 14.76
- 25
- 375
- End 1 Inside Diameter:
- 1.72
- 44
- Material: Epdm, Plastic
- Modular: Yes
- End 2 Inside Diameter:
- 1.72
- 44
- Quick Connect Fitting Quantity: 0
-
Features:
- Specifically-engineered materials resist collapse under vacuum
- Engineered to resist electrochemical degradation – the leading cause of hose failure
- EPDM tube
- synthetic fiber knit reinforcement, heat-, ozone- and chemical coolant-resistant EPDM cover
- Manufactured with OEM-exact hose components (quick connects, branch connectors/tees, sensors, etc.)
- Meets SAE 20R3 EC Class D1 under 25mm (1 in.) ID, SAE 20R4 EC Class D1 for 25mm (1 in.) ID and over
- Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
- Note: Gates recommends replacing clamps each time a new coolant hose is installed
- Caution: Do not use for fuel or oil transfer applications
- Gates is the Automotive Aftermarket leader in the unique modular assembly coolant hose segment. Gates Modular Coolant Hose is manufactured to fit specific applications and are similar to OEM specifications to include specific essential integrated OE components such as hose branches, quick-connectors, sensors, restrictors, etc.
This Part Fits the Following OEM/Substitute Numbers:
22298, 24428L, 2L34 8B273 BA, 2L348B273BA, 3L1Z 8286 BA, 3L3Z 8286 BA, 62121, 62202, 71902, 8931, D71902, F65A 8B273 BD, F65Z 8286 BB, F65Z 8286 BD, F75A 8B273 TB, F85A 8B273 GB, F85Z 8286 GA, KM-3050-A...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | Drive Type | CID |
|---|---|---|---|---|---|---|---|
| 2004 - Ford F-150 | V | - | Lower | GAS | 8 Cyl 5.4L | 4WD | 330 |
Showing 1 - 7 of 7 products
Loading...