Image
Product
Price
- Molded Coolant Hose
- Product Attributes:
- End 3 Inside Diameter: .60
- Branch Quantity: 1
- Modular Components Included: Branch
- Contains Spring: No
- Molded: Yes
- Centerline Length:
- 15
- 23
- 584
- End 1 Inside Diameter:
- 1.35
- 34
- Material: Epdm, Plastic
- Modular: Yes
- End 2 Inside Diameter:
- 1.35
- 34
- Quick Connect Fitting Quantity: 0
-
Features:
- Specifically-engineered materials resist collapse under vacuum
- Engineered to resist electrochemical degradation – the leading cause of hose failure
- EPDM tube
- synthetic fiber knit reinforcement, heat-, ozone- and chemical coolant-resistant EPDM cover
- Manufactured with OEM-exact hose components (quick connects, branch connectors/tees, sensors, etc.)
- Meets SAE 20R3 EC Class D1 under 25mm (1 in.) ID, SAE 20R4 EC Class D1 for 25mm (1 in.) ID and over
- Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
- Note: Gates recommends replacing clamps each time a new coolant hose is installed
- Caution: Do not use for fuel or oil transfer applications
- Gates is the Automotive Aftermarket leader in the unique modular assembly coolant hose segment. Gates Modular Coolant Hose is manufactured to fit specific applications and are similar to OEM specifications to include specific essential integrated OE components such as hose branches, quick-connectors, sensors, restrictors, etc.
This Part Fits the Following OEM/Substitute Numbers:
17421, 24767L, 5058489AC, 5058489AD, 5058489AE, 5058489AF, 66088, 66089, 72574, E72574
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|
| 2010 - Dodge Caliber | L | 2360 | Lower | GAS | 4 Cyl 2.4L | 144 |
- This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
- Molded
Additional Fitment Information:
| Vehicle | Transmission | Position | Sub Model |
|---|---|---|---|
| 2010 - Dodge Caliber | Automatic CVT | Upper | SE |
Additional Fitment Information:
| Vehicle | Block | CC | Transmission | Position | Engine | CID |
|---|---|---|---|---|---|---|
| 2010 - Dodge Caliber | L | 2360 | Manual | Upper | 4 Cyl 2.4L | 144 |
Additional Fitment Information:
| Vehicle | Transmission | Position | Sub Model |
|---|---|---|---|
| 2010 - Dodge Caliber | Automatic CVT | Upper | SE |
Additional Fitment Information:
| Vehicle | Block | CC | Transmission | Position | Engine | CID |
|---|---|---|---|---|---|---|
| 2010 - Dodge Caliber | L | 2360 | Manual | Upper | 4 Cyl 2.4L | 144 |
Additional Fitment Information:
| Vehicle | Block | CC | Transmission | Position | Engine | CID |
|---|---|---|---|---|---|---|
| 2010 - Dodge Caliber | L | 2360 | Manual | Upper | 4 Cyl 2.4L | 144 |
Additional Fitment Information:
| Vehicle | Transmission | Position | Sub Model |
|---|---|---|---|
| 2010 - Dodge Caliber | Automatic CVT | Upper | SE |
Additional Fitment Information:
| Vehicle | Doors | Cylinder Head Type | Valves | Fuel Type | Fuel Delivery Type | Sub Model | Wheel FeedBase | Body | Drive Type | Aspiration | Engine Version |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 2010 - Dodge Caliber | 4 | DOHC | 16 | GAS | FI | Uptown | - | Hatchback | FWD | Naturally Aspirated | GEMA |
- Molded Coolant Hose
- Product Attributes:
- End 3 Inside Diameter: .48
- Branch Quantity: 1
- Modular Components Included: Branch, Outlet, Radiator Fill Tee
- Contains Spring: No
- Molded: Yes
- Centerline Length:
- 35.9
- 912
- End 1 Inside Diameter:
- 1.35
- 34
- Material: Epdm, Plastic, Steel
- Modular: Yes
- End 2 Inside Diameter:
- 1.35
- 34
- Quick Connect Fitting Quantity: 0
-
Features:
- Specifically-engineered materials resist collapse under vacuum
- Engineered to resist electrochemical degradation – the leading cause of hose failure
- EPDM tube
- synthetic fiber knit reinforcement, heat-, ozone- and chemical coolant-resistant EPDM cover
- Manufactured with OEM-exact hose components (quick connects, branch connectors/tees, sensors, etc.)
- Meets SAE 20R3 EC Class D1 under 25mm (1 in.) ID, SAE 20R4 EC Class D1 for 25mm (1 in.) ID and over
- Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
- Note: Gates recommends replacing clamps each time a new coolant hose is installed
- Caution: Do not use for fuel or oil transfer applications
- Gates is the Automotive Aftermarket leader in the unique modular assembly coolant hose segment. Gates Modular Coolant Hose is manufactured to fit specific applications and are similar to OEM specifications to include specific essential integrated OE components such as hose branches, quick-connectors, sensors, restrictors, etc.
This Part Fits the Following OEM/Substitute Numbers:
23193, 26564X, 5058482AD, 5058482AE, 5058482AF, 5058482AG, 5058482AH, 66092, 72627, 9876, E72627, E91352, R43100
Additional Fitment Information:
| Vehicle | Block | CC | Transmission | Position | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|---|
| 2010 - Dodge Caliber | L | 2360 | Automatic CVT | Upper | GAS | 4 Cyl 2.4L | 144 |
Showing 1 - 9 of 9 products
Loading...