1997 Chevrolet Corvette Spark Plug Wire Set Parts
Image
Product
Price
- Red; For Vehicles w/LS Truck Headers; 11.75 in.; 135 Deg. Plug Boot w/Headers
- 409 Spiro-Pro 10.4mm Ignition Wire Set; Red; For Vehicles w/LS Truck Headers; 11.75 in.; 135 Deg. Plug Boot;
- 409 Spiro-Pro 10.4mm Ignition Wire Set
- Product Attributes:
- WARNING CA Proposition 65: Yes
- Boot Type: Spiro Wound
- WARNING CA Proposition 65 Message: Cancer And Reproductive
- Engine: Chevy Ls Gen Iv
- Boot Angle: 135 Degree
-
Features:
- 10.4mm Diameter
- 100 percent Pure Silicone Ignition Wire
- 350 Ohm Per Foot Resistance
- Heat Treated Fiberglass Braid
- Spiro-Wound Core
- Eliminates Radio Frequency Interference
- Red
- 10.4mm high performance ignition wires available for street or race applications. 409 Ignition Wire provides continuous heat protection up to 600º F and 102,000 volts dielectric strength. A tightly woven heat treated fiberglass braid is applied over our 100% pure silicone 8mm ignition wire. A 3rd layer of silicone is extruded making it a 10.4mm diameter.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1997 - Chevrolet Corvette | V | - | 8 Cyl 5.7L | 350 |
- Blue; For Vehicles w/LS Truck Headers; 11.75 in.; 135 Deg. Plug Boot w/Headers
- 409 Spiro-Pro 10.4mm Ignition Wire Set; Blue; For Vehicles w/LS Truck Headers; 11.75 in.; 135 Deg. Plug Boot;
- 409 Spiro-Pro 10.4mm Ignition Wire Set
- Product Attributes:
- WARNING CA Proposition 65: Yes
- Boot Type: Spiro Wound
- WARNING CA Proposition 65 Message: Cancer And Reproductive
- Engine: Chevy Ls Gen Iv
- Boot Angle: 135 Degree
-
Features:
- 10.4mm Diameter
- 100 percent Pure Silicone Ignition Wire
- 350 Ohm Per Foot Resistance
- Heat Treated Fiberglass Braid
- Spiro-Wound Core
- Eliminates Radio Frequency Interference
- Blue
- 10.4mm high performance ignition wires available for street or race applications. 409 Ignition Wire provides continuous heat protection up to 600º F and 102,000 volts dielectric strength. A tightly woven heat treated fiberglass braid is applied over our 100% pure silicone 8mm ignition wire. A 3rd layer of silicone is extruded making it a 10.4mm diameter.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1997 - Chevrolet Corvette | V | - | 8 Cyl 5.7L | 350 |
- Blue; For Vehicles w/LS Truck Headers; 11.75 in.; 135 Deg. Plug Boot w/Headers
- 409 Spiro-Pro 10.4mm Ignition Wire Set; Blue; For Vehicles w/LS Truck Headers; 11.75 in.; 135 Deg. Plug Boot;
- 409 Spiro-Pro 10.4mm Ignition Wire Set
- Product Attributes:
- WARNING CA Proposition 65: Yes
- Boot Type: Spiro Wound
- WARNING CA Proposition 65 Message: Cancer And Reproductive
- Engine: Chevy Ls Gen Iv
- Boot Angle: 135 Degree
-
Features:
- 10.4mm Diameter
- 100 percent Pure Silicone Ignition Wire
- 350 Ohm Per Foot Resistance
- Heat Treated Fiberglass Braid
- Spiro-Wound Core
- Eliminates Radio Frequency Interference
- Blue
- 10.4mm high performance ignition wires available for street or race applications. 409 Ignition Wire provides continuous heat protection up to 600º F and 102,000 volts dielectric strength. A tightly woven heat treated fiberglass braid is applied over our 100% pure silicone 8mm ignition wire. A 3rd layer of silicone is extruded making it a 10.4mm diameter.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1997 - Chevrolet Corvette | V | - | 8 Cyl 5.7L | 350 |
- Red; For Vehicles w/LS Truck Headers; 11.75 in.; 135 Deg. Plug Boot w/Headers
- 409 Spiro-Pro 10.4mm Ignition Wire Set; Red; For Vehicles w/LS Truck Headers; 11.75 in.; 135 Deg. Plug Boot;
- 409 Spiro-Pro 10.4mm Ignition Wire Set
- Product Attributes:
- WARNING CA Proposition 65: Yes
- Boot Type: Spiro Wound
- WARNING CA Proposition 65 Message: Cancer And Reproductive
- Engine: Chevy Ls Gen Iv
- Boot Angle: 135 Degree
-
Features:
- 10.4mm Diameter
- 100 percent Pure Silicone Ignition Wire
- 350 Ohm Per Foot Resistance
- Heat Treated Fiberglass Braid
- Spiro-Wound Core
- Eliminates Radio Frequency Interference
- Red
- 10.4mm high performance ignition wires available for street or race applications. 409 Ignition Wire provides continuous heat protection up to 600º F and 102,000 volts dielectric strength. A tightly woven heat treated fiberglass braid is applied over our 100% pure silicone 8mm ignition wire. A 3rd layer of silicone is extruded making it a 10.4mm diameter.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1997 - Chevrolet Corvette | V | - | 8 Cyl 5.7L | 350 |
- 8.5mm; Black; Custom Fit To OEM Specifications; Straight Boots
- Custom Spark Plug Wire Set; 8.5mm; Black; Custom Fit To OEM Specifications; Straight Boots;
- Custom Spark Plug Wire Set
- Product Attributes:
- Boot Type: Multi-angle
- Engine: Oem
- Engine Make/Size: Oem
-
Features:
- Custom Fit For Make And Model Listed
- Wires Are Pre-Cut To Exact Specifications
- Bolt-on Performance
- Engineered from the inside out, the 8.5 offers everything you have ever wanted in a wire; incredibly low resistance without electronic interference! In a single 8 inch length of Super Conductor Wire there is only 40 - 50 ohms of resistance! That is the lowest resistance of any helically wound wire. To accomplish this, we use a copper alloy conductor due to its great voltage carrying capabilities. The low resistance results in less loss in spark energy so more reaches the spark plug. The conductor is wound extremely tight around a special center core. So tight in fact, that there is over 40 feet of conductor wrapped into a single foot of plug wire. This winding procedure, combined with a ferro-magnetic impregnated center core, produces an extremely effective Electro Magnetic Interference (EMI) choke. This choke, or suppression capability, keeps the EMI inside the wire where it cannot interfere with other electronics on your vehicle. The outer sleeve that surrounds the conductor assembly is just as impressive. A proprietary blend of silicone and synthetic material produce a sleeve that is highly resistant to high heat as well as abrasion and tears. The MSDs 8.5mm spark plug terminals feature Dual Crimp terminals. As the name implies, the terminals feature two crimps; one for the sleeve of the wire and another separate crimp to grasp the conductor. The MSDs 8.5mm spark plug terminals feature Dual Crimp terminals. As the name implies, the terminals feature two crimps; one for the sleeve of the wire and another separate crimp to grasp the conductor.
Additional Fitment Information:
| Vehicle |
|---|
| 1997 - Chevrolet Corvette |
- 8.5mm; Black; Custom Fit To OEM Specifications; Straight Boots
- Custom Spark Plug Wire Set; 8.5mm; Black; Custom Fit To OEM Specifications; Straight Boots;
- Custom Spark Plug Wire Set
- Product Attributes:
- Boot Type: Multi-angle
- Engine: Oem
- Engine Make/Size: Oem
-
Features:
- Custom Fit For Make And Model Listed
- Wires Are Pre-Cut To Exact Specifications
- Bolt-on Performance
- Engineered from the inside out, the 8.5 offers everything you have ever wanted in a wire; incredibly low resistance without electronic interference! In a single 8 inch length of Super Conductor Wire there is only 40 - 50 ohms of resistance! That is the lowest resistance of any helically wound wire. To accomplish this, we use a copper alloy conductor due to its great voltage carrying capabilities. The low resistance results in less loss in spark energy so more reaches the spark plug. The conductor is wound extremely tight around a special center core. So tight in fact, that there is over 40 feet of conductor wrapped into a single foot of plug wire. This winding procedure, combined with a ferro-magnetic impregnated center core, produces an extremely effective Electro Magnetic Interference (EMI) choke. This choke, or suppression capability, keeps the EMI inside the wire where it cannot interfere with other electronics on your vehicle. The outer sleeve that surrounds the conductor assembly is just as impressive. A proprietary blend of silicone and synthetic material produce a sleeve that is highly resistant to high heat as well as abrasion and tears. The MSDs 8.5mm spark plug terminals feature Dual Crimp terminals. As the name implies, the terminals feature two crimps; one for the sleeve of the wire and another separate crimp to grasp the conductor. The MSDs 8.5mm spark plug terminals feature Dual Crimp terminals. As the name implies, the terminals feature two crimps; one for the sleeve of the wire and another separate crimp to grasp the conductor.
Additional Fitment Information:
| Vehicle |
|---|
| 1997 - Chevrolet Corvette |
- 8.5mm; Red; Custom Fit To OEM Specifications; Straight Boots
- Custom Spark Plug Wire Set; 8.5mm; Red; Custom Fit To OEM Specifications; Straight Boots;
- Custom Spark Plug Wire Set
- Product Attributes:
- Boot Type: Multi-angle
- Engine: Oem
-
Features:
- Custom Fit For Make And Model Listed
- Wires Are Pre-Cut To Exact Specifications
- Bolt-on Performance
- Engineered from the inside out, the 8.5 offers everything you have ever wanted in a wire; incredibly low resistance without electronic interference! In a single 8 inch length of Super Conductor Wire there is only 40 - 50 ohms of resistance! That is the lowest resistance of any helically wound wire. To accomplish this, we use a copper alloy conductor due to its great voltage carrying capabilities. The low resistance results in less loss in spark energy so more reaches the spark plug. The conductor is wound extremely tight around a special center core. So tight in fact, that there is over 40 feet of conductor wrapped into a single foot of plug wire. This winding procedure, combined with a ferro-magnetic impregnated center core, produces an extremely effective Electro Magnetic Interference (EMI) choke. This choke, or suppression capability, keeps the EMI inside the wire where it cannot interfere with other electronics on your vehicle. The outer sleeve that surrounds the conductor assembly is just as impressive. A proprietary blend of silicone and synthetic material produce a sleeve that is highly resistant to high heat as well as abrasion and tears. The MSDs 8.5mm spark plug terminals feature Dual Crimp terminals. As the name implies, the terminals feature two crimps; one for the sleeve of the wire and another separate crimp to grasp the conductor. The MSDs 8.5mm spark plug terminals feature Dual Crimp terminals. As the name implies, the terminals feature two crimps; one for the sleeve of the wire and another separate crimp to grasp the conductor.
Additional Fitment Information:
| Vehicle |
|---|
| 1997 - Chevrolet Corvette |
- 8.5mm; Red; Custom Fit To OEM Specifications; Straight Boots
- Custom Spark Plug Wire Set; 8.5mm; Red; Custom Fit To OEM Specifications; Straight Boots;
- Custom Spark Plug Wire Set
- Product Attributes:
- Boot Type: Multi-angle
- Engine: Oem
-
Features:
- Custom Fit For Make And Model Listed
- Wires Are Pre-Cut To Exact Specifications
- Bolt-on Performance
- Engineered from the inside out, the 8.5 offers everything you have ever wanted in a wire; incredibly low resistance without electronic interference! In a single 8 inch length of Super Conductor Wire there is only 40 - 50 ohms of resistance! That is the lowest resistance of any helically wound wire. To accomplish this, we use a copper alloy conductor due to its great voltage carrying capabilities. The low resistance results in less loss in spark energy so more reaches the spark plug. The conductor is wound extremely tight around a special center core. So tight in fact, that there is over 40 feet of conductor wrapped into a single foot of plug wire. This winding procedure, combined with a ferro-magnetic impregnated center core, produces an extremely effective Electro Magnetic Interference (EMI) choke. This choke, or suppression capability, keeps the EMI inside the wire where it cannot interfere with other electronics on your vehicle. The outer sleeve that surrounds the conductor assembly is just as impressive. A proprietary blend of silicone and synthetic material produce a sleeve that is highly resistant to high heat as well as abrasion and tears. The MSDs 8.5mm spark plug terminals feature Dual Crimp terminals. As the name implies, the terminals feature two crimps; one for the sleeve of the wire and another separate crimp to grasp the conductor. The MSDs 8.5mm spark plug terminals feature Dual Crimp terminals. As the name implies, the terminals feature two crimps; one for the sleeve of the wire and another separate crimp to grasp the conductor.
Additional Fitment Information:
| Vehicle |
|---|
| 1997 - Chevrolet Corvette |
Showing 1 - 8 of 8 products
Loading...