2021 Ram 1500 Suspension Control Arm Parts
Choose your Submodel for your 2021 Ram 1500
Image
Product
Price
- CONTROL ARMS
- ADDS 3 DEGREES OF CAMBER USES VULCANIZED RUBBER BUSHINGS & A FACTORY LIKE BALL JOINT MAXTRAC SUSPENSION DOES NOT RECOMMEND USING WHEELS WIDER THAN 9" OR WHEELS WITH LESS THAN 4.5" BACKSPACING. DOING SO WILL RESULT IN VOIDING ANY AND ALL MANUFACTURER WARRANTIES
- CAMBER CORRECTION UPPER CONTROL ARMS
- MAXTRAC SUSPENSION'S PART # 352700 IS A PAIR OF FRONT UPPER CONTROL ARMS FORGED FROM ALUMINUM
Additional Fitment Information:
| Vehicle |
|---|
| 2021 - Ram 1500 |
- Suspension Control Arm
- MOOG RK663890 Suspension Control Arm for Ram 1500
-
Features:
- PREMIUM BUSHINGS -- Pre-installed with optimized stiffness to inhibit noise for a comfortable ride
- ENHANCED STRUCTURAL STRENGTH – Material and heat treatment are carefully selected to meet application requirements
- EASY TO INSTALL -- Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
- MOOG premium control arms for foreign and domestic nameplates are engineered for structural strength and corrosion protection.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
520-685, 68264947AA, CMS251147, GS251147
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 2021 - Ram 1500 | V | 2987 | Rear Lower | 6 Cyl 3.0L | 182 |
- 2-3 In. Upper A-arm Pair
- Pair; 2-3 in. w/HD Ball Joints And Bushings Does Not Fit w/Rear Air Ride Models
- UPPER A-ARMS;PR 19 RAM 1500
- Upper A-Arm
- Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: California Residents- Warning: Cancer And-or Other Reproductive Harm. (for More Information Go To Www.p65warnings.ca.gov)
-
Features:
- 2-3 In. Upper A-Arm Pair
- High Strength DOM Tubing Front Upper A-Arms
- Gusset Plate Stiffeners For Added Rigidity And Strength
- OEM Style Rubber Control Arm Bushings
- Upper A-Arm Ball Joint Correction
- Optimize and improve the steering geometry and strength of your vehicle with a pair of Skyjacker Upper Control Arms. With the revised steering geometry you get increased suspension travel, and our Upper control arms are manufactured in-house in the USA. They are made of high-strength DOM tubing to withstand extreme amounts of stress and loads, and a gusset plate stiffener is welded in between the A-arms for added rigidity and strength. You are not only increasing on-road handling but also off-road strength and capability when you choose a set of Skyjacker Upper Control Arms. Our UCA's include an optimum pivot ball joint for improved flexibility and to reduce stress. Ball joints are greasable to increase service life. 100% bolt-on.
Additional Fitment Information:
| Vehicle | Position | Sub Model |
|---|---|---|
| 2021 - Ram 1500 | Front Upper | TRX Launch Edition |
- Red; Forged OE Upgrade; Pair Ball Joint Must Be Greased Prior To Use
- Control Arm; Red; Forged Upper; OE Upgrade; Pair;
- Control Arm
- Product Attributes:
- WARNING CA Proposition 65: No
-
Features:
- 10-Stage Variable Valving
- High Pressure Nitrogen Charged
- Durable One-Piece Design. Take your truck to the next level with Rough Country?ÇÖs most durable Upper Control Arm to date! Rough Country?ÇÖs Forged Upper Control Arms feature a solid, 1-piece design made of forged aluminum for superior strength and durability. This forged design outperforms all other types of arm construction, with no welding weak spots that could bend or break.High Strength Ball Joints. Rough Country?ÇÖs Forged Upper Control Arms feature POM ball joints for a greater range of motion offering more wheel articulation than standard or OE replacements. These ball joints feature a Polyoxymethylene ball race with an extremely low coefficient of friction for longer life, and a larger ball diameter to improve range of motion with a maintenance-free design. Each ball joint is fully greaseable. Rough Country?ÇÖs Forged Upper Control Arms also feature durable rubber bushings rubber bushings for superior quality and durability.\
Additional Fitment Information:
| Vehicle | Position | Sub Model |
|---|---|---|
| 2021 - Ram 1500 | Upper | TRX Launch Edition |
- For 3-3.5 in. Lift; Forged
- Control Arm; For 3-3.5 in. Lift; Forged;
- Control Arm
- Product Attributes:
- WARNING CA Proposition 65: No
-
Features:
- 10-Stage Variable Valving
- High Pressure Nitrogen Charged
- Durable One-Piece Design. Take your truck to the next level with Rough Country?ÇÖs most durable Upper Control Arm to date! Rough Country?ÇÖs Forged Upper Control Arms feature a solid, 1-piece design made of forged aluminum for superior strength and durability. This forged design outperforms all other types of arm construction, with no welding weak spots that could bend or break.\
Additional Fitment Information:
| Vehicle | Position | Sub Model |
|---|---|---|
| 2021 - Ram 1500 | Front Upper | Limited Longhorn |
- For 3-3.5 in. Lift; Forged
- Control Arm; For 3-3.5 in. Lift; Forged;
- Control Arm
- Product Attributes:
- WARNING CA Proposition 65: No
-
Features:
- 10-Stage Variable Valving
- High Pressure Nitrogen Charged
- Durable One-Piece Design. Take your truck to the next level with Rough Country?ÇÖs most durable Upper Control Arm to date! Rough Country?ÇÖs Forged Upper Control Arms feature a solid, 1-piece design made of forged aluminum for superior strength and durability. This forged design outperforms all other types of arm construction, with no welding weak spots that could bend or break.\
Additional Fitment Information:
| Vehicle | Position | Sub Model |
|---|---|---|
| 2021 - Ram 1500 | Rear Upper | Limited Longhorn |
Additional Fitment Information:
| Vehicle |
|---|
| 2021 - Ram 1500 |
- Forged 3-3.5 in. Lift
- Control Arm; Forged Upper; 3-3.5 in. Lift;
- Control Arm
- Product Attributes:
- WARNING CA Proposition 65: No
-
Features:
- Made Of Forged Aluminum For Unsurpassed Strength And Durability
- No Welding Weak Spots
- Corrected Ball Joint Angle For Lifted Applications
- Includes Pom Ball Joints For Greater Range Of Motion And Easier Installation
- Ball Joints Are Fully Greaseable Includes Durable OEM Style Rubber Bushings
- Durable One-Piece Design. Take your truck to the next level with Rough Country?ÇÖs most durable Upper Control Arm to date! Rough Country?ÇÖs Forged Upper Control Arms feature a solid, 1-piece design made of forged aluminum for superior strength and durability. This forged design outperforms all other types of arm construction, with no welding weak spots that could bend or break.\
Additional Fitment Information:
| Vehicle | Position | Sub Model |
|---|---|---|
| 2021 - Ram 1500 | Upper | Limited Longhorn |
- Rear Upper Suspension Control Arm For Ram 1500 Classic Jeep Gladiator
- TOR Rear Upper Suspension Control Arm TOR-CK642932 For Ram 1500 Classic Jeep Gladiator
- TOR
- Product Attributes:
- WebNameEbay4: For Ram 1500 Classic Jeep Rear Upper Suspension Control Arm Tor-ck642932
- ComponentsSummaryRegularWithBrands: Tor Suspension Control Arm
- ComponentsSummaryShort: Suspension Control Arm
- ComponentsSummaryLongWithBrands: 1x Rear Upper Tor Suspension Control Arm
- WebNamePlain: Tor Rear Upper Suspension Control Arm Tor-ck642932
- ComponentsSummaryShortWithBrands: Tor Suspension Control Arm
- NumberOfPieces: 1
- ComponentsSummaryLong: 1x Rear Upper Suspension Control Arm
- WebNameLong: Tor Rear Upper Suspension Control Arm Tor-ck642932 For Ram 1500 Classic Jeep Gladiator
- WebNameShort: Rear Upper Suspension Control Arm Tor-ck642932 For Ram 1500 Classic Jeep Gladiator
- ComponentsSummaryRegular: Suspension Control Arm
- WebNameRegular: Tor Rear Upper Suspension Control Arm Tor-ck642932 For Ram 1500 Classic Jeep Gladiator
- WebNameEbay2: [rear Upper] Suspension Control Arm Tor-ck642932 For Ram 1500 Classic Jeep
- WebNameEbay3: Suspension Control Arm Rear Upper Tor-ck642932 For Ram 1500 Classic Jeep
- WebNameEbay: Rear Upper Suspension Control Arm For Ram 1500 Classic Jeep Gladiator
-
Features:
- Complete Control Assembly Arm Pre-Assembled With Bushings, Mounts & Ball Joints (When Applicable) - No additional parts or tools required for installation
- TOR exclusive USA-engineered metal bearing design enables grease to flow through the bearing to the stud for reduced friction and enhanced strength and stability
- Premium cover plate design allows for tighter tolerances vs traditional cover plate designs, providing a more durable and extended life for the control arm
- TOR engineered steel composition results in a stronger component. Our full-ball metal stud provides 36 degrees of smooth, consistent, rotational movement resulting in more responsive steering
- Full-ball type studs use cold-formed manufacturing to reduce imperfections and hold the tightest of tolerances
- Convenient easy access wrench flat allows for the use of a socket for easy installation and removal
- Manufactured with CNC tooling, automated grinding and assembly lines for increased consistency
- Forged, CNC-machined shell leads to high-quality, precision-made performance and additional strength
- Part Reference Numbers : BK643932 CA81606PR CA81606 MS251146 GS251146 CMS251146 CK642932 K642932 RK642932 SEE 2607238 TK642932
- TOR offers the most comprehensible suspension parts on the market. The unmatched performance and robustness coupled with longer lasting components make our supension parts the go-to choice for thousands of mechanical shops in North America. Designed, tested and certified by TOR certified engineers.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
CA81606, CA81606PR, CMS251146, GS251146, RK642932, SEE 2607238
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 2021 - Ram 1500 | V | - | Rear Upper | 8 Cyl 5.7L | 345 |
- Rear Lower Suspension Control Arm For Ram 1500 Classic Jeep Gladiator
- TOR Rear Lower Suspension Control Arm TOR-CK643334 For Ram 1500 Classic Jeep Gladiator
- TOR
- Product Attributes:
- WebNameEbay4: For Ram 1500 Classic Jeep Rear Lower Suspension Control Arm Tor-ck643334
- ComponentsSummaryRegularWithBrands: Tor Suspension Control Arm
- ComponentsSummaryShort: Suspension Control Arm
- ComponentsSummaryLongWithBrands: 1x Rear Lower Tor Suspension Control Arm
- WebNamePlain: Tor Rear Lower Suspension Control Arm Tor-ck643334
- ComponentsSummaryShortWithBrands: Tor Suspension Control Arm
- NumberOfPieces: 1
- ComponentsSummaryLong: 1x Rear Lower Suspension Control Arm
- WebNameLong: Tor Rear Lower Suspension Control Arm Tor-ck643334 For Ram 1500 Classic Jeep Gladiator
- WebNameShort: Rear Lower Suspension Control Arm Tor-ck643334 For Ram 1500 Classic Jeep Gladiator
- ComponentsSummaryRegular: Suspension Control Arm
- WebNameRegular: Tor Rear Lower Suspension Control Arm Tor-ck643334 For Ram 1500 Classic Jeep Gladiator
- WebNameEbay2: [rear Lower] Suspension Control Arm Tor-ck643334 For Ram 1500 Classic Jeep
- WebNameEbay3: Suspension Control Arm Rear Lower Tor-ck643334 For Ram 1500 Classic Jeep
- WebNameEbay: Rear Lower Suspension Control Arm For Ram 1500 Classic Jeep Gladiator
-
Features:
- Complete Control Assembly Arm Pre-Assembled With Bushings, Mounts & Ball Joints (When Applicable) - No additional parts or tools required for installation
- TOR exclusive USA-engineered metal bearing design enables grease to flow through the bearing to the stud for reduced friction and enhanced strength and stability
- Premium cover plate design allows for tighter tolerances vs traditional cover plate designs, providing a more durable and extended life for the control arm
- TOR engineered steel composition results in a stronger component. Our full-ball metal stud provides 36 degrees of smooth, consistent, rotational movement resulting in more responsive steering
- Full-ball type studs use cold-formed manufacturing to reduce imperfections and hold the tightest of tolerances
- Convenient easy access wrench flat allows for the use of a socket for easy installation and removal
- Manufactured with CNC tooling, automated grinding and assembly lines for increased consistency
- Forged, CNC-machined shell leads to high-quality, precision-made performance and additional strength
- Part Reference Numbers : BK643334 CA82505PR CA82505 MS251147 GS251147 CMS251147 CK643334 K643334 RK643334 1741152 2607238 CP5077
- TOR offers the most comprehensible suspension parts on the market. The unmatched performance and robustness coupled with longer lasting components make our supension parts the go-to choice for thousands of mechanical shops in North America. Designed, tested and certified by TOR certified engineers.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
2607238, CA82505, CA82505PR, CMS251147, GS251147, RK643334
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 2021 - Ram 1500 | V | 2987 | Rear Lower | 6 Cyl 3.0L | 182 |
Showing 1 - 10 of 10 products
Loading...