Shop By Product Matching "280"

Choose your Engine for your 1959 Chrysler 300


Showing 1 - 10 of 10 products
Image
SKU
Product
Rating
Price

Wix
  • WIX Spin-On Lube Filter
  • Original Equipment Part Number 1719635 Master Pack Version ; Manufacturer OE Recommended Oil Change Intervals
  • Product Attributes:
    • Inner Diameter Top: Closed
    • Outer Diameter Top: 3.661
    • Burst Pressure: 290
    • Duty Type: Ld
    • Bypass Relief Valve Setting: 8-11
    • Flow Rate: 7-9 Gpm
    • Media Material: Synthetic
    • Class: A
    • Outlet: 0.00
    • Anti-Drain Back Valve: Yes
    • Inlet: 0.00
  • Use Wix Premium For Severe Driving -Ideal match for synthetic and high mileage motor oils -Meets of exceeds OE recommended change intervals – up to 15,000 miles -Synthetic blended media provides 99% dirt trapping efficiency -Silicone anti-drainback valve prevents dry starts -Superior performance in stop and go and heavy traffic -Performs well for routine towing -High capacity – ideal for dirty and dusty environments -Long life, tight-fitting gasket -Solid metal end caps provide positive seal.
  • This item must be purchased in quantities of 12

This Part Fits the Following OEM/Substitute Numbers:
0 451 104 001, 0 451 104 063, 0 451 203 001, 0 451 203 001-850, 0 451 203 153, 0 451 203 176, 0 986 452 001, 0 986 452 002, 0 986 AF0 124, 0 986 AF1 077, 00 012 280 22, 00 03 141 914, 00 03 563 591, 00 050 426 21, 00 052 212 72, 00 052 213 13, 00 061 604 48, 00 750 614 09...VIEW MORE

Additional Fitment Information:
Vehicle Block CC Region Engine CID
1959 - Chrysler 300 V 6769 United States 8 Cyl 6.7L 413

Wix
  • WIX Spin-On Lube Filter
  • Original Equipment Part Number 1719635 Also Available In Master Pack Version ; Manufacturer OE Recommended Oil Change Intervals
  • Product Attributes:
    • Inner Diameter Top: Closed
    • Outer Diameter Top: 3.661
    • Duty Type: Ld
    • Micron: 21.00
    • Flow Rate: 7-9 Gpm
    • Class: A
    • Outlet: 0.00
    • Burst Pressure: 290
    • BetaRatio: 2/20=6/20
    • Bypass Relief Valve Setting: 8-11
    • Media Material: Enhanced Cellulose
    • Anti-Drain Back Valve: Yes
    • Inlet: 0.00
  • Use Wix Premium For Severe Driving -Ideal match for synthetic and high mileage motor oils -Meets of exceeds OE recommended change intervals – up to 15,000 miles -Synthetic blended media provides 99% dirt trapping efficiency -Silicone anti-drainback valve prevents dry starts -Superior performance in stop and go and heavy traffic -Performs well for routine towing -High capacity – ideal for dirty and dusty environments -Long life, tight-fitting gasket -Solid metal end caps provide positive seal.

This Part Fits the Following OEM/Substitute Numbers:
0 451 104 001, 0 451 104 003, 0 451 203 001-850, 0 451 203 005, 0 451 203 153, 0 986 452 001, 0 986 452 002, 0 986 AF0 124, 0 986 AF1 077, 00 012 280 22, 00 050 426 21, 00 052 212 72, 00 052 213 13, 00 061 604 48, 00 750 614 09, 00 750 614 11, 00 750 650 49, 00013505015...VIEW MORE

Additional Fitment Information:
Vehicle Block CC Region Engine CID
1959 - Chrysler 300 V 6769 United States 8 Cyl 6.7L 413

Gates
  • W/O A.C.; W/Air Suspension; Cut to fit
  • Molded Coolant Hose
  • Product Attributes:
    • Branch Quantity: 0
    • Contains Spring: No
    • Molded: Yes
    • Centerline Length:
      • 15.1
      • 384
    • End 1 Inside Diameter:
      • 1.5
      • 38
    • Material: Epdm
    • Modular: No
    • End 2 Inside Diameter:
      • 1.5
      • 38
    • Quick Connect Fitting Quantity: 0
  • Features:
    • Specifically-engineered materials resist collapse under vacuum
    • Engineered to resist electrochemical degradation, the leading cause of hose failure
    • Pre-shaped to fit and to ensure perfectly sealed conditions
    • EPDM tube
    • synthetic fiber knit reinforcement
    • heat-, ozone- and chemical coolant-resistant EPDM cover
    • Meets requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
    • Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
    • Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
    • Caution: Do not use for fuel or oil transfer applications
  • Our Molded Coolant Hoses are manufactured to fit upper, lower, bypass, heater and other coolant applications with OEM-quality specifications, saving you time, money and energy from going to your OE dealer for radiator hose replacements. Gates' molded coolant hose line is the most comprehensive line on the replacement market.

Additional Fitment Information:
Vehicle Block CC Position Fuel Type Engine CID
1959 - Chrysler 300 V - Upper GAS 8 Cyl 6.8L 413

Gates
  • W/A.C.
  • Molded Coolant Hose
  • Product Attributes:
    • Branch Quantity: 0
    • Contains Spring: No
    • Molded: Yes
    • Centerline Length:
      • 15.1
      • 384
    • End 1 Inside Diameter:
      • 1.5
      • 38
    • Material: Epdm
    • Modular: No
    • End 2 Inside Diameter:
      • 1.5
      • 38
    • Quick Connect Fitting Quantity: 0
  • Features:
    • Specifically-engineered materials resist collapse under vacuum
    • Engineered to resist electrochemical degradation, the leading cause of hose failure
    • Pre-shaped to fit and to ensure perfectly sealed conditions
    • EPDM tube
    • synthetic fiber knit reinforcement
    • heat-, ozone- and chemical coolant-resistant EPDM cover
    • Meets requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
    • Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
    • Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
    • Caution: Do not use for fuel or oil transfer applications
  • Our Molded Coolant Hoses are manufactured to fit upper, lower, bypass, heater and other coolant applications with OEM-quality specifications, saving you time, money and energy from going to your OE dealer for radiator hose replacements. Gates' molded coolant hose line is the most comprehensive line on the replacement market.

This Part Fits the Following OEM/Substitute Numbers:
021920, 046, 09844243, 0A0880, 100899, 101337, 11531711321, 1303X00, 134MFT1, 1365619, 14-1642-4, 142-5775, 142-5930, 1433180, 155613A, 15562826, 1616812, 1616813...VIEW MORE

Additional Fitment Information:
Vehicle Block CC Position Fuel Type Engine CID
1959 - Chrysler 300 V - Upper GAS 8 Cyl 6.8L 413

Gates
  • W/O A.C.; W/O Air Suspension; Cut to fit
  • Molded Coolant Hose
  • Product Attributes:
    • Branch Quantity: 0
    • Contains Spring: No
    • Molded: Yes
    • Centerline Length:
      • 15.1
      • 384
    • End 1 Inside Diameter:
      • 1.5
      • 38
    • Material: Epdm
    • Modular: No
    • End 2 Inside Diameter:
      • 1.5
      • 38
    • Quick Connect Fitting Quantity: 0
  • Features:
    • Specifically-engineered materials resist collapse under vacuum
    • Engineered to resist electrochemical degradation, the leading cause of hose failure
    • Pre-shaped to fit and to ensure perfectly sealed conditions
    • EPDM tube
    • synthetic fiber knit reinforcement
    • heat-, ozone- and chemical coolant-resistant EPDM cover
    • Meets requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
    • Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
    • Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
    • Caution: Do not use for fuel or oil transfer applications
  • Our Molded Coolant Hoses are manufactured to fit upper, lower, bypass, heater and other coolant applications with OEM-quality specifications, saving you time, money and energy from going to your OE dealer for radiator hose replacements. Gates' molded coolant hose line is the most comprehensive line on the replacement market.

Additional Fitment Information:
Vehicle Block CC Position Fuel Type Engine CID
1959 - Chrysler 300 V - Upper GAS 8 Cyl 6.8L 413

Motorad
  • 160 Degrees F Alternate Temperature Option
  • Standard

This Part Fits the Following OEM/Substitute Numbers:
12T6B, 13076, 13476, 13706, 1389275, 1391226, 15476, 15706, 1601-290205, 16706, 1672619, 1672620, 1672720, 1734957, 1737915, 206-160, 20660, 2463441...VIEW MORE

Additional Fitment Information:
Vehicle Block CC Engine CID
1959 - Chrysler 300 V 6769 8 Cyl 6.7L 413

National Bearing
  • Taper Bearing Set Includes Cup and Cone
  • Suggested Purchase Quantity: 2
    • Most jobs typically require 2 of this item.

This Part Fits the Following OEM/Substitute Numbers:
0009815805, 0019810805KZ, 009-311-219, 010-409-607, 010409607, 051-3842, 0635 501 008, 102720A, 11055119, 11407629, 11900.21413.01, 1243-33-047, 12541277, 12547209, 1271495, 136903, 142919, 1615339...VIEW MORE

Additional Fitment Information:
Vehicle Position
1959 - Chrysler 300 Front Inner

Pro-Tec
  • PROTEC-NEW Spin-On Lube Filter
  • Original Equipment Part Number 1719635 Also Available In Master Pack Version Also Available In Master Pack Version
  • Product Attributes:
    • Inner Diameter Top: Closed
    • Outer Diameter Top: 3.661
    • Duty Type: Ld
    • Micron: 21.00
    • Flow Rate: 7-9 Gpm
    • Class: A
    • Outlet: 0.00
    • Burst Pressure: 290
    • BetaRatio: 2/20=6/20
    • Bypass Relief Valve Setting: 8-11
    • Media Material: Enhanced Cellulose
    • Anti-Drain Back Valve: Yes
    • Inlet: 0.00
  • Use Protec For Normal Diving- Advanced engine protection- Ideal filter for traditional OE recommended oil change intervals up to 10,000 miles- Cellulose and resin filter media provides up to 96.5% dirt trapping efficiency- Performs well in everyday normal driving conditions such as city and highway travel- Nitrile gasket- Solid metal end caps provide positive seal

This Part Fits the Following OEM/Substitute Numbers:
0 451 104 001, 0 451 104 003, 0 451 203 001-850, 0 451 203 005, 0 451 203 153, 0 986 452 001, 0 986 452 002, 0 986 AF0 124, 0 986 AF1 077, 0410365, 0410423, 0410563, 0418038, 0418159, 0451103325, 0451104065, 1 986 452 001, 1 986 452 002...VIEW MORE

Additional Fitment Information:
Vehicle Block CC Region Engine CID
1959 - Chrysler 300 V 6769 United States 8 Cyl 6.7L 413

Fram
  • FRAM, PH8A, Oil Filter
  • Spin-on Oil Filter
  • Extra Guard
  • Product Attributes:
    • Reusable: No
    • Grade Type: Regular
    • Replacable Filter: Yes
    • Gasket Inside Diameter: 2.422
    • Non Slip Grip: Yes
    • Gasket Thickness: 0.203
    • Torque Nut: No
    • Attachment Type: Spin-on
    • Burst Pressure: 230.000
    • Gasket Type: Base
    • Housing Color: Orange
    • Inside Thread Diameter: 3/4-16
    • Bypass Relief Valve Setting: 12.000
    • Grade: Advanced
    • Gasket Outside Diameter: 2.797
    • Meets Or Exceeds Original Equipment Manufacturer Specifications: Yes
    • Bypass Relief Valve: Yes
    • Filter Media Material: Cellulose/synthetic Blend
    • Anti-Drain Back Valve: Yes
  • Features:
    • Silicone anti-drain back valve helps ensure safe engine start up
    • SureGrip® technology for easy install and removal
    • Filter media is a blend of fiber and resin that captures 95% of the dirt particles
    • Proven protection for up to 10,000 miles (16,000 kilometers)
    • Engineered for use with synthetic or conventional motor oils
  • FRAM Extra Guard® oil filters deliver advanced engine protection for everyday drivers who perform routine oil changes at OE (original equipment) recommended intervals. Equipped with SureGrip® technology, FRAM Extra Guard® oil filters provide a non-slip surface allowing for easy install and removal. The silicone anti-drain back valve ensures safe engine startups, extending the life of the oil filter for up to 10,000 miles (16,000 kilometers).

This Part Fits the Following OEM/Substitute Numbers:
000-983-0607, 00120-00001, 00120-00012, 02-7088230, 041-0745, 041-8159, 041-8756, 1-5360, 1-829195, 1-8A, 10-00041, 10-00074, 10-00132, 10-00280, 10-00314, 10-00520, 10-00967, 10-50132...VIEW MORE

Additional Fitment Information:
Vehicle Block CC Engine CID
1959 - Chrysler 300 V 6769 8 Cyl 6.7L 413

Fram
  • FRAM, HP1, Oil Filter
  • High Performance Spin-on Oil Filter
  • FRAM HIGH PERFORMANCE
  • Product Attributes:
    • Gasket Inside Diameter: 2.460
    • Non Slip Grip: No
    • Gasket Thickness: 0.0354
    • Torque Nut: No
    • Attachment Type: Spin-on
    • Burst Pressure: 500.000
    • Gasket Type: Base
    • Housing Color: Orange
    • Inside Thread Diameter: 3/4-16
    • Bypass Relief Valve Setting: 22.000
    • Marine Approved: No
    • Grade: Advanced
    • Gasket Outside Diameter: 2.814
    • Bypass Relief Valve: Yes
    • Filter Media Material: Cellulose/synthetic Blend
    • Anti-Drain Back Valve: Yes
  • Features:
    • Low-restriction synthetic blend racing media designed for high oil flow. The media features 94% efficiency @20 microns for excellent engine protection**
    • Silicone anti-drain back valve.
    • Recommended maximum oil flow: 10-18gpm, depending on model***
    • Maximum burst pressure: 350-500psi, depending on model***
    • Maximum operating pressure: 200psi on all models***
    • Compatible with all oil types, this filter is optimized for racing and high-performance street cars
  • FRAM Racing® filters are designed with a heavy-gauge tapping plate and an extra-thick* steel can that is able to withstand the high pressure flexing caused by demanding driving conditions. A spiral-shaped center tube provides protection against collapse, and tough steel end caps add even more durability. A screen-over 22psi filter bypass valve provides additional protection against larger contaminants.** 

This Part Fits the Following OEM/Substitute Numbers:
041-8144, 105000603000, 15590, 185515, 3120MP, 33120, 3609251, 3690251, 85622, 86120MP, 92622, B2-HPG, B252, B253, BF7613, BF992, BT8328, BT8434...VIEW MORE

Additional Fitment Information:
Vehicle Block CC Engine CID
1959 - Chrysler 300 V 6769 8 Cyl 6.7L 413
Showing 1 - 10 of 10 products

Loading...