Image
Product
Price
- This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
- Rear
Additional Fitment Information:
| Vehicle | Position | Body |
|---|---|---|
| 2000 - BMW 323Ci | Rear | Coupe |
- This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
- with Bellows Set of 2
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2000 - BMW 323Ci | Front |
- Front Rear Disc Brake Rotors Kit For BMW 328i 323i 323Ci K8-101280
- CMX Front Rear Disc Brake Rotors Kit For BMW 328i 323i 323Ci K8-101280
- CMX Rotor Kit
- Product Attributes:
- WebNameEbay4: For Bmw 328i 323i 323ci Front Rear Disc Brake Rotors Kit
- ComponentsSummaryRegularWithBrands: 4x Cmx Disc Brake Rotor
- ComponentsSummaryShort: 4x Disc Rotor
- ComponentsSummaryLongWithBrands: 2x Front Cmx Disc Brake Rotor (both Side) + 2x Rear Cmx Disc Brake Rotor (both Side)
- WebNamePlain: Cmx Front Rear Disc Brake Rotors Kit K8-101280
- ComponentsSummaryShortWithBrands: 4x Cmx Disc Rotor
- NumberOfPieces: 4
- ComponentsSummaryLong: 2x Front Disc Brake Rotor (both Side) + 2x Rear Disc Brake Rotor (both Side)
- WebNameLong: Cmx Front Rear Disc Brake Rotors Kit For Bmw 328i 323i 323ci K8-101280
- WebNameShort: Front Rear Disc Brake Rotors Kit For Bmw 328i 323i 323ci K8-101280
- ComponentsSummaryRegular: 4x Disc Brake Rotor
- WebNameRegular: Cmx Front Rear Disc Brake Rotors Kit For Bmw 328i 323i 323ci K8-101280
- WebNameEbay2: [front+rear] Disc Brake Rotors Kit For Bmw 328i 323i 323ci
- WebNameEbay3: Disc Brake Rotors Front Rear Kit For Bmw 328i 323i 323ci
- WebNameEbay: Front Rear Disc Brake Rotors Kit For Bmw 328i 323i 323ci K8-101280
-
Features:
- Engineered with carbon-enhanced XCast™ (G3000) iron castings to achieve an optimal wear resistance, tensile strength and steel hardness providing unmatched braking performance
- 100% Precision Spin and Mill-Balanced for smoother stopping and zero vibration at any speed
- Cross-Hatched smooth surface to improve the pad's ability to grip the rotor surface, especially during initial brake applications or in wet conditions
- Double disc ground finish eliminates lateral run-out and DTV (disk thickness variation) issues on the rotor and improves pad-rotor bed-in
- Tested for maximum tolerance to voluminous amount of constant thermal cycles
- CNC-Machined to the tightest tolerances to guarantee manufacturing precision and accuracy
- Thickness and Metallurgy electronically validated for manufacturing consistency
- Best matched with CMX, TEC, SIM or PPF brake pads
- Kit Includes: 2x Front Disc Brake Rotor (Both Side) + 2x Rear Disc Brake Rotor (Both Side)
- Part Reference Numbers : AG34064 CR34064 PR34064 34004 34064 YH141815C YH141815 120.34029 121.34029 BR34064 BM-725 24886393 24886780 4886393 4886780 74886393 74886780 125277 Q34004 96780 BD125277 AG34228 CR34228 PR34228 34228 YH145474C YH1
- As a leader in the Automotive Braking industry, CMX delivers unrivaled braking solutions that redefine performance, reliability, and safety for your vehicle. CMX offers a comprehensive range of cutting-edge brake components meticulously engineered to meet the demands of do-it-yourself customers, garages and large fleet operators. From high-performance brake pads and rotors, to durable brake drums, reliable brake wheel cylinders, state-of-the-art brake shoes and convenient brake kits, CMX has everything you need to elevate your vehicle's braking system. We delivers the highest standards of quality and reliability for your braking needs, enabling you to drive with confidence, precision, and peace of mind.
Additional Fitment Information:
| Vehicle | Position | Body |
|---|---|---|
| 2000 - BMW 323Ci | Front and Rear | Coupe |
- This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
Additional Fitment Information:
| Vehicle | Position | Body |
|---|---|---|
| 2000 - BMW 323Ci | Rear | Coupe |
Additional Fitment Information:
| Vehicle |
|---|
| 2000 - BMW 323Ci |
Additional Fitment Information:
| Vehicle |
|---|
| 2000 - BMW 323Ci |
- Schrader EZ-sensor Snap-in
- Use 33560 if 33500 is not available Screw torque = 11.5 in-lbs; Valve core torque = 3.5 in-lbs, 0.4Nm Attachment Type: Snap-in Angle Type: Fixed Angled Stem: Fixed angle Plastic Housing Material Nickel-Coated Core
- Programmable for 314.9, 315 and 433MHz Applications
- Product Attributes:
- Washer Included: No
- Mounting Hardware Included: Yes
- Grommets Included: No
- Manufacturer Warranty: 2 Years
- California Prop 65 Warning Label (Text): Warning: This Product Can Expose You To Chemicals Including Lead, Which Is Known To The State Of California To Cause Cancer And Birth Defects And Other Reproductive Harm. For More Information, Go To Www.p65warnings.ca.gov
- Recommended Torque (in/Lbs): 11.5 Inch/lbs.
- Valve Stem Included: Yes
- Monitor Type: Direct
- Real Time Pressure Signal Transmission: Yes
- Attachment Type:
- Snap-fit
- Snap-in
- Mounting Location: Wheel
- Valve Stem Material: Rubber
- Programmed/Programmable: Programmable
- Frequency: 315 / 314.9 / 433
- Activation Type: Not Programmed, Programmable
- Core Material: Nickel-coated
- Recommended Torque (N-m): 1.3 N-m
- Valve Cap Included: Yes
- Valve Color: Black
- Material: Rubber
- Power Source: Battery
-
Features:
- Easy to program and covers the majority of vehicles on the road in North America
- Combines 314.9, 315, and 433 MHz frequencies for improved vehicle coverage
- Engineered and manufactured to OEM design and quality specifcations
- Rubber valve can be replaced by Schrader rubber snap-in valve kit 20018, or with clamp-in fixed aluminum valve stem 34000 (silver) or 34010 (black)
- Compatible with the majority of independent TPMS programming and diagnostic tools on the market
- Always make sure that your TPMS scan and programming tool has the latest software installed to ensure maximum coverage
- Schrader Programmable EZ-sensor with Rubber Snap-In Valve - Must be Programmed to Specific M/M/Y Vehicle
- Sensor comes fully assembled and ready to program and install
- Future-proofed OE quality TPMS product supports new and pending OE technologies
- Schrader EZ-sensor is a programmable sensor that combines 314.9, 315, and 433 MHz frequencies into one SKU. Each EZ-sensor must be programmed before installation and needs a compatible TPMS programming tool.This multi-frequency solution has market-leading vehicle coverage and is compatible with most independent TPMS programming and diagnostics tools. EZ-sensor performs identically to OE replacement TPMS sensors and helps reduce the overall cost of service and optimize inventory levels. EZ-sensor can be interchanged with Schrader replacement rubber snap-in valve stems or fixed angle aluminum clamp-in stems. This sensor is not a DIY product and requires appropriate skills, knowledge, and equipment for service.Schrader has been the leading global manufacturer of valves and sensing solutions for automotive and industrial applications, delivering solutions that protect and perform. Schrader is widely known for the invention of the standard pneumatic tire valve, the same valve used on most motor vehicles in the world.
Additional Fitment Information:
| Vehicle |
|---|
| 2000 - BMW 323Ci |
- BMW E46 3-Series / 03-05 E85/E86 Z4 High-Performance All-Aluminum Radiator
- E46
- CSF manufactures the most advanced and efficient radiator in the industry for your E46 3-Series/Z4. CSF uses innovative tube and fin technologies with industry-leading testing methods to maximize airflow and heat dissipation.
- Product Attributes:
- Inlet Connector Type: Slip On
- Thermostat Included: No
- Grade Type: Performance
- Inlet Diameter: 1.5 In.
- Mounting Hardware Included: No
- Frame Included: No
- Tank Material: Aluminum
- Internal Engine Oil Cooler: No
- Outlet Diameter: 1.5 In.
- Coolant Hose Outlet Connection Type: Oe Type Connection
- Core Row Quantity: 2
- Radiator Cap Included: No
- Core Width: 17 In.
- Down Flow Or Cross Flow Type: Cross Flow
- Core Thickness: 1.625 In.
- Installation Type: Drop-in Fit Installation
- Inlet Location: Top Left
- Core Material: Aluminum
- Coolant Hose Inlet Connection Type: Oe Type Connection
- Core Height: 22.8125 In.
- Mounting Type: Mounts With Oe Hardware
- Outlet Location: Bottom Right
- Finish/Color: Satin
- Internal Transmission Oil Cooler: No
- Outlet Connector Type: Slip On
-
Features:
- 2-Row 42mm Core (Dual Core) Featuring CSF's Exclusive B-Tube Technology
- Core Features an Ultra-Efficient Fin with 6.5mm Fin Height and Multi-Louvered Design for Maximum Surface Area Contact
- CNC Machined "Quick-Connect" Inlet/Outlet Connections
- CNC Machined Brackets and Fittings for Superb Fit and Durability
- All-Aluminum Race Style Drain Plug
- Smooth Satin Finish
- Drop-in Fit
- The CSF E46 3-Series/Z4 radiator is a true "Drop-in fit" design requiring no modifications to install. OE style brackets are all CNC machined and welded for the best durability possible. Inlet/Outlet connections are designed to match the OE connections so you can reuse OEM hoses or aftermarket. Trust the cooling experts at CSF for the best performing, highest-quality, and most reliable radiators.
Additional Fitment Information:
| Vehicle | Block | CC | Transmission | Position | Engine | CID |
|---|---|---|---|---|---|---|
| 2000 - BMW 323Ci | L | 2494 | Manual | Center | 6 Cyl 2.5L | 152 |
- BMW E46 3-Series / 03-05 E85/E86 Z4 High-Performance All-Aluminum Radiator
- CSF manufactures the most advanced and efficient radiator in the industry for your E46 3-Series/Z4. CSF uses innovative tube and fin technologies with industry-leading testing methods to maximize airflow and heat dissipation.
- Product Attributes:
- Inlet Connector Type: Slip On
- Thermostat Included: No
- Grade Type: Performance
- Inlet Diameter: 1.5 In.
- Mounting Hardware Included: No
- Frame Included: No
- Tank Material: Aluminum
- Internal Engine Oil Cooler: No
- Outlet Diameter: 1.5 In.
- Coolant Hose Outlet Connection Type: Oe Type Connection
- Core Row Quantity: 2
- Radiator Cap Included: No
- Core Width: 17 In.
- Down Flow Or Cross Flow Type: Cross Flow
- Core Thickness: 1.625 In.
- Installation Type: Drop-in Fit Installation
- Inlet Location: Top Left
- Core Material: Aluminum
- Coolant Hose Inlet Connection Type: Oe Type Connection
- Core Height: 22.8125 In.
- Mounting Type: Mounts With Oe Hardware
- Outlet Location: Bottom Right
- Finish/Color: Satin
- Internal Transmission Oil Cooler: No
- Outlet Connector Type: Slip On
-
Features:
- 2-Row 42mm Core (Dual Core) Featuring CSF's Exclusive B-Tube Technology
- Core Features an Ultra-Efficient Fin with 6.5mm Fin Height and Multi-Louvered Design for Maximum Surface Area Contact
- CNC Machined "Quick-Connect" Inlet/Outlet Connections
- CNC Machined Brackets and Fittings for Superb Fit and Durability
- All-Aluminum Race Style Drain Plug
- Smooth Satin Finish
- Drop-in Fit
- The CSF E46 3-Series/Z4 radiator is a true "Drop-in fit" design requiring no modifications to install. OE style brackets are all CNC machined and welded for the best durability possible. Inlet/Outlet connections are designed to match the OE connections so you can reuse OEM hoses or aftermarket. Trust the cooling experts at CSF for the best performing, highest-quality, and most reliable radiators.
This Part Fits the Following OEM/Substitute Numbers:
17119071518
Additional Fitment Information:
| Vehicle | Block | CC | Transmission | Region | Engine | Manuf. Body Code | CID |
|---|---|---|---|---|---|---|---|
| 2000 - BMW 323Ci | L | 2494 | Manual | United States | 6 Cyl 2.5L | E46 | 152 |
- Dark Tint
- Sunroof Wind Deflector; Dark Tint;
- Sunroof Wind Deflector
- Product Attributes:
- Sunroof Type: Fits Oem
- WARNING CA Proposition 65: No
-
Features:
- Excellent Reduction Of In-Cabin Wind Noise
- 4mm Thick Tinted Cast Acrylic
- Fits Sunroof Opening Precisely
- Held In Place With MagiClip Fastening System
- AirCushion Gasket Seals Edge
- Sleek/Sophisticated Look
- Fits Factory Installed Sunroofs
- Lets The Fresh Air In
- The WeatherTech Sunroof Wind Deflector gives you an excellent reduction of in cabin wind noise and air turbulence. It is crafted in Germany from the finest 4mm thick, tinted cast acrylic. Our sunroof deflector fits the sunroof opening precisely, and is held securely in place with the MagiClip vehicle specific fastening system. To protect your vehicles finish, the unique AirCushion gasket seals the edge of the deflector. WeatherTech Sunroof Wind Deflectors sleek and sophisticated look is a great addition to any vehicle. Let the fresh air in. The WeatherTech Sunroof Wind Deflector is manufactured to fit factory installed sunroofs and is not intended nor guaranteed to fit aftermarket installations. WeatherTech(R) Sunroof Wind Deflector are guaranteed against faulty materials and workmanship for a period of three years.
Additional Fitment Information:
| Vehicle |
|---|
| 2000 - BMW 323Ci |
Showing 1 - 10 of 16 products
Loading...