Image
Product
Price
- Greaseable Super Strength Universal Joint
- Location 1 is a CV Joint Greasable Super Strength U-Joint
- MOOG 280 Greaseable Super Strength Universal Joint for Jeep Grand Cherokee
- Product Attributes:
- Bearing Cap Type: 4 Plain Round Bearings
- Bearing Cap Axis 2 Diameter:
- 1.063
- 27
- Grade Type: Premium
- Length Axis 1:
- 3.22
- 81.7
- Length Axis 2:
- 3.22
- 81.7
- Bearing Type B: Round Plain
- Bearing Cap Axis 1 Diameter:
- 1.063
- 27
- Bearing Type A: Round Plain
- Greaseable: Yes
- U-Joint Identification: 4 Plain Round Bearings
- Length Measurement B: Outside Of Bearing To Outside Of Bearing
- Lube Fitting Location: Flush-type Lube Fitting In Bearing
- Part Description: Universal Joint
- Length Measurement A: Outside Of Bearing To Outside Of Bearing
-
Features:
- BUILT TO LAST -- Rugged design specifically engineered for applications with higher torque and horsepower
- COMPREHENSIVE COVERAGE -- Available for foreign and domestic nameplates
- CORROSION PROTECTION -- Exclusive MICRO SHIELDâ„¢ coating protects against rust and corrosion
- GREASABLE DESIGN -- Bearing cups feature a radial design to allow 360 Degrees lubricant distribution to all bearing surfaces
- KEEPS DIRT OUT -- Abrasion-resistant nitrile seals provide ideal grease retention and protection from under-vehicle contaminants
- RIGOROUS TESTING -- Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
- STRONG AND DURABLE -- Bearing cups are cold-forged, case-hardened and precision ground while steel cross is forged and carburized heat treated for strength and durability
- Backed by superior materials and rigorous testing, MOOG Super Strength universal joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
Additional Fitment Information:
| Vehicle | Position | Drive Type |
|---|---|---|
| 2000 - Dodge Dakota | Front Driveshaft at Transfer Case | 4WD |
- Greaseable Super Strength Universal Joint
- Greasable Super Strength U-Joint
- MOOG 280 Greaseable Super Strength Universal Joint for Jeep Grand Cherokee
- Product Attributes:
- Bearing Cap Type: 4 Plain Round Bearings
- Bearing Cap Axis 2 Diameter:
- 1.063
- 27
- Grade Type: Premium
- Length Axis 1:
- 3.22
- 81.7
- Length Axis 2:
- 3.22
- 81.7
- Bearing Type B: Round Plain
- Bearing Cap Axis 1 Diameter:
- 1.063
- 27
- Bearing Type A: Round Plain
- Greaseable: Yes
- U-Joint Identification: 4 Plain Round Bearings
- Length Measurement B: Outside Of Bearing To Outside Of Bearing
- Lube Fitting Location: Flush-type Lube Fitting In Bearing
- Part Description: Universal Joint
- Length Measurement A: Outside Of Bearing To Outside Of Bearing
-
Features:
- BUILT TO LAST -- Rugged design specifically engineered for applications with higher torque and horsepower
- COMPREHENSIVE COVERAGE -- Available for foreign and domestic nameplates
- CORROSION PROTECTION -- Exclusive MICRO SHIELDâ„¢ coating protects against rust and corrosion
- GREASABLE DESIGN -- Bearing cups feature a radial design to allow 360 Degrees lubricant distribution to all bearing surfaces
- KEEPS DIRT OUT -- Abrasion-resistant nitrile seals provide ideal grease retention and protection from under-vehicle contaminants
- RIGOROUS TESTING -- Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
- STRONG AND DURABLE -- Bearing cups are cold-forged, case-hardened and precision ground while steel cross is forged and carburized heat treated for strength and durability
- Backed by superior materials and rigorous testing, MOOG Super Strength universal joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
This Part Fits the Following OEM/Substitute Numbers:
10153, 10153BF, 10153G, 1143HD, 1143HP, 114513, 114513R, 114513X, 114521HD, 153, 15617322, 20049, 20049P, 20208, 20335, 2100153, 2120153, 2150153...VIEW MORE
Additional Fitment Information:
| Vehicle | Position | Drive Type |
|---|---|---|
| 2000 - Dodge Dakota | Front Driveshaft at Front Axle | 4WD |
- 4 ft.; Silver
- TracRac Utility Rack; 4 ft.; Silver;
- TracRac Utility Rack
-
Features:
- 4 ft. Extension Rack
- Additional 4-foot Utility Rack Base Rail. Allows user to connect the base rails and slide the overhead racks the length of the truck body.
Additional Fitment Information:
| Vehicle |
|---|
| 2000 - Dodge Dakota |
- 4 ft.; Silver
- TracRac Utility Rack; 4 ft.; Silver;
- TracRac Utility Rack
-
Features:
- 4 ft. Extension Rack
- Additional 4-foot Utility Rack Base Rail. Allows user to connect the base rails and slide the overhead racks the length of the truck body.
Additional Fitment Information:
| Vehicle |
|---|
| 2000 - Dodge Dakota |
Additional Fitment Information:
| Vehicle |
|---|
| 2000 - Dodge Dakota |
- For Truck/SUV; 18000 lb. Capacity
- SEC18 ES Premium Winch; For Truck/SUV; 18000 lb. Capacity;
- SEC18 ES Premium Winch
- Product Attributes:
- Voltage: Na
- Rated Single Line Pull (lbs.): 18000
- WARNING CA Proposition 65: No
-
Features:
- Planetary Gear System For Fast Line Speed
- Automatic Load-Holding Brake
- Free Spooling
- Power In And Out
- Low Electric Current
- Waterproof - Fully Submersible
- Mile Marker's most powerful electric w in. to date: the SEC18(es). With 18,000 pounds of pulling and recovery power, this electric w in. can be utilized in many applications from tow trucks to industrial DC; due to its relatively light weight and wide range of accommodations. The SEC18(es) features fast line speed, is completely sealed, and meets SAE J706 Standards.
Additional Fitment Information:
| Vehicle |
|---|
| 2000 - Dodge Dakota |
- For Truck/SUV; 18000 lb. Capacity
- SEC18 ES Premium Winch; For Truck/SUV; 18000 lb. Capacity;
- SEC18 ES Premium Winch
- Product Attributes:
- Voltage: Na
- Rated Single Line Pull (lbs.): 18000
- WARNING CA Proposition 65: No
-
Features:
- Planetary Gear System For Fast Line Speed
- Automatic Load-Holding Brake
- Free Spooling
- Power In And Out
- Low Electric Current
- Waterproof - Fully Submersible
- Mile Marker's most powerful electric w in. to date: the SEC18(es). With 18,000 pounds of pulling and recovery power, this electric w in. can be utilized in many applications from tow trucks to industrial DC; due to its relatively light weight and wide range of accommodations. The SEC18(es) features fast line speed, is completely sealed, and meets SAE J706 Standards.
Additional Fitment Information:
| Vehicle |
|---|
| 2000 - Dodge Dakota |
Additional Fitment Information:
| Vehicle | Block | CC | Doors | Cylinder Head Type | Fuel Type | Engine | Aspiration | Engine Version | Engine Designation | Valves | Fuel Delivery Type | Bed Length | Sub Model | Engine VIN | Wheel FeedBase | CID |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 2000 - Dodge Dakota | V | - | 2 | OHV | GAS | 8 Cyl 5.9L | Naturally Aspirated | Magnum | - | 16 | FI | 78.0 | Base | Z | 111.9 | 360 |
- Greaseable with 1 Piece Rear Drive Shaft 1 Piece Driveshaft 1.062in Bearing Cap Diameter with 3.219in Outside Snap Ring Dimension
- HGVF
- Product Attributes:
- Bearing Cap Type B: Osr
- Grease Type: N.l.g.i. Grade 2
- Model Number: Spicer 1310/spl22
- Length B (mm): 81.8
- SR(2)Brng Cap to Brng Cap(OSR): 3.219
- Bearing Cap Finish: Ground
- Bearing Cap Type A: Osr
- Pre Greased: N
- Seal Material: Rubber
- Grease Zerk Included: Y
- Coating Type: None
- Greaseable: Y
- Bearing Cap Diameter (2): 1.062
- Bearing Cap Diameter (1): 1.062
- OEM Mfg: Spicer
- OEM Series: 1310/spl22
- Bearing Cap Diameter B (mm): 1.062
- Snap Ring Included: Y
- Grease Fitting Location: One Lube Fitting In Bearing
- Snap Ring Type: External
- Length A (mm): 81.8
- SR(1)Brng Cap to Brng Cap(OSR): 3.219
- Bearing Cap Diameter A (mm): 1.062
-
Suggested Purchase Quantity: 4
- Most jobs typically require 4 of this item.
This Part Fits the Following OEM/Substitute Numbers:
1-0153, 1-0153G, 1-0154, 1-0200, 1-0278, 15-153X, 2-0785, 269, 280, 329, 369, 379, 380, 45U0107, 45U0111, 45U0121, 45U0145, 45U0150...VIEW MORE
Additional Fitment Information:
| Vehicle | Position | Drive Type |
|---|---|---|
| 2000 - Dodge Dakota | Front Driveshaft at Front Axle | 4WD |
- Class 3 Trailer Hitch; 2in. Receiver; Select Dodge Dakota (Square Tube Frame)
- 5000lbs. Gross Trailer Weight; 500lbs. Tongue Weight; 8000lbs. Weight Distributing; 800lbs. Weight Distributing Tongue Weight Square Main Body~No Drilling Required~Visibility: Concealed~Install Time 30 Minutes
- CURT 13280 Class 3 Trailer Hitch; 2-Inch Receiver; Square Tube Frame; Fits Select Dodge Dakota
- Class III 2 in. Receiver Hitch
- Product Attributes:
- Gross Trailer Weight: 5000 Lbs.
- Visibility: Concealed
- Weight Carrying Capacity: 5000
- Body Shape: Square
- WD Tongue Weight: 800
- Install Time: 30 Minutes
- WC Tongue Weight: 500
- Weight Distribution: 8000
- Receiver Tube Size: 2.000 In.
-
Features:
- Made w/A Vehicle-Specific Design For A Custom Fit
- Tested For Safety In Accordance w/SAE J684
- Precisely Welded For Superior Strength And Fit
- Protected By A Durable High-Gloss Black Powder Coat Finish
- Co-Cured In A Rust-Resistant Liquid Bonderite Coating
- Strengthened w/A Cast Welded Seamless Collar
- Equipped w/An Open-Back Receiver For Easy Cleaning
- Backed By A Limited Lifetime Warranty
- Made in USA [may include imported hardware]
- Whatever your task at hand -- whether its launching that boat before daybreak, setting up your camper before the rush or getting a final load to the dump before close -- CURT class 3 trailer hitches offer the strength needed for serious towing. They make it easy to hitch up and Bring It, offering a vehicle-specific fit and the weight capacity to handle a variety of trailers. Custom class 3 hitches are the most common type of receiver hitch for pickup trucks and SUVs. Because of their weight range, they are also found on full-size cars, crossovers and minivans. Each custom-fit class 3 hitch package is made for vehicle-specific mounting. This particular kit fits certain years of the Dodge Dakota (see application info to verify vehicle compatibility). It provides a weight carrying capacity of 5,000 lbs. GTW and 500 lbs. TW. It is also compatible with a weight distribution hitch for level towing and a rating of 8,000 lbs. WD and 800 lbs. WDTW. CURT class 3 trailer hitches are typically used to attach and haul utility trailers, boat trailers, campers, snowmobile or ATV haulers and more (NOTE: Never exceed the lowest-rated towing component). Each class 3 hitch has a 2 in. receiver tube and is tested in accordance with SAE J684 for safety. To ensure that CURT class 3 receiver hitches have what it takes for serious trailering, they are designed using a hands-on approach and are constructed with rugged, high-strength steel and precise welding. We also protect our class 3 hitches in a co-cured finish of liquid Bonderite and black powder coat for superior resistance to rust, chipping and UV damage.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | Sub Model | CID |
|---|---|---|---|---|---|---|
| 2000 - Dodge Dakota | V | - | Rear | 8 Cyl 5.9L | SLT | 360 |
Showing 1 - 10 of 53 products
Loading...