Shop By Product Matching "280"
Image
Product
Price
- with 1st Design
(w/o Pump Casting Metal- Gasket Material)
Additional Fitment Information:
| Vehicle |
|---|
| 2001 - Buick LeSabre |
Additional Fitment Information:
| Vehicle |
|---|
| 2001 - Buick LeSabre |
- Schrader EZ-sensor Snap-in
- Use 33560 if 33500 is not available Screw torque = 11.5 in-lbs; Valve core torque = 3.5 in-lbs, 0.4Nm Attachment Type: Snap-in Angle Type: Fixed Angled Stem: Fixed angle Plastic Housing Material Nickel-Coated Core
- Programmable for 314.9, 315 and 433MHz Applications
- Product Attributes:
- Washer Included: No
- Mounting Hardware Included: Yes
- Grommets Included: No
- Manufacturer Warranty: 2 Years
- California Prop 65 Warning Label (Text): Warning: This Product Can Expose You To Chemicals Including Lead, Which Is Known To The State Of California To Cause Cancer And Birth Defects And Other Reproductive Harm. For More Information, Go To Www.p65warnings.ca.gov
- Recommended Torque (in/Lbs): 11.5 Inch/lbs.
- Valve Stem Included: Yes
- Monitor Type: Direct
- Real Time Pressure Signal Transmission: Yes
- Attachment Type:
- Snap-fit
- Snap-in
- Mounting Location: Wheel
- Valve Stem Material: Rubber
- Programmed/Programmable: Programmable
- Frequency: 315 / 314.9 / 433
- Activation Type: Not Programmed, Programmable
- Core Material: Nickel-coated
- Recommended Torque (N-m): 1.3 N-m
- Valve Cap Included: Yes
- Valve Color: Black
- Material: Rubber
- Power Source: Battery
-
Features:
- Easy to program and covers the majority of vehicles on the road in North America
- Combines 314.9, 315, and 433 MHz frequencies for improved vehicle coverage
- Engineered and manufactured to OEM design and quality specifcations
- Rubber valve can be replaced by Schrader rubber snap-in valve kit 20018, or with clamp-in fixed aluminum valve stem 34000 (silver) or 34010 (black)
- Compatible with the majority of independent TPMS programming and diagnostic tools on the market
- Always make sure that your TPMS scan and programming tool has the latest software installed to ensure maximum coverage
- Schrader Programmable EZ-sensor with Rubber Snap-In Valve - Must be Programmed to Specific M/M/Y Vehicle
- Sensor comes fully assembled and ready to program and install
- Future-proofed OE quality TPMS product supports new and pending OE technologies
- Schrader EZ-sensor is a programmable sensor that combines 314.9, 315, and 433 MHz frequencies into one SKU. Each EZ-sensor must be programmed before installation and needs a compatible TPMS programming tool.This multi-frequency solution has market-leading vehicle coverage and is compatible with most independent TPMS programming and diagnostics tools. EZ-sensor performs identically to OE replacement TPMS sensors and helps reduce the overall cost of service and optimize inventory levels. EZ-sensor can be interchanged with Schrader replacement rubber snap-in valve stems or fixed angle aluminum clamp-in stems. This sensor is not a DIY product and requires appropriate skills, knowledge, and equipment for service.Schrader has been the leading global manufacturer of valves and sensing solutions for automotive and industrial applications, delivering solutions that protect and perform. Schrader is widely known for the invention of the standard pneumatic tire valve, the same valve used on most motor vehicles in the world.
Additional Fitment Information:
| Vehicle | Region |
|---|---|
| 2001 - Buick LeSabre | Canada |
- Fuel Injector O-Ring Kit
- 0.296 (in) Inside Diameter x 0.574 (in) Outside Diameter
- FEL-PRO ES 70599 Fuel Injector O-Ring Kit for Ford F-150
- Product Attributes:
- Grade Type: Premium
-
Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered for the sealing repair environment
- Unsurpassed quality you can trust
- Validated for fit, form, and function
- Fel-Pro® gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.
-
Suggested Purchase Quantity: 4
- Most jobs typically require 4 of this item.
This Part Fits the Following OEM/Substitute Numbers:
019.997.13.48112.997, 0199971348112997, 021 198 031 C, 021198031C, 035 906 149 A, 035906149A, 0K2A5-13-253, 0K2A513253, 10031124, 12458114, 12537425, 12570621, 12574292, 12574332, 12575954, 12576479, 12580647, 12581319...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 2001 - Buick LeSabre | V | 3800 | Upper | 6 Cyl 3.8L | 231 |
- For Towing & Hauling AK29 Adapter Kit is Required to Install this Unit when Adapting Air Adjustable Shock Absorbers to Vehicles without Rear Air Leveling System
- Max-Air Air Shock Absorber
This Part Fits the Following OEM/Substitute Numbers:
15211374, 15211375, 15211376, 15211377, 15211378, 15220434, 15786900, 15786901, 15873313, 15873314, 19121822, 19149151, 19208029, 20759946, 20759947, 20759948, 20759949, 22064561...VIEW MORE
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2001 - Buick LeSabre | Rear |
- 13 Row Plate & Fin Engine Oil Cooler Kit with Sandwich Adapter
- 13 Row Plate & Fin Engine Oil Cooler Kit with Sandwich Adapter
- Sandwich Adapter Engine Oil Cooler Kit
- Product Attributes:
- Adapter thread size: 3/4"-16, 13/16"-16, 18x1.5mm, 20x1.5mm, 22x1.5mm
- BTU: 21000
- Adapter o-ring size: 2-3/4, 3-1/2
- Cooler height: 8-7/16
- Cooler inlet dim: 8-1/2
- Adapter inlet size: 3/8 Npt
- Rated functional: 250psi Working / 300psi Burst Strength
- Cooler material: Aluminum
- Adapter thickness: 1-3/4, 2-1/8
-
Features:
- 13 Row Plate & Fin Engine Oil Cooler Kit with Sandwich Adapter
- A step up from the popular tube and fin design this aluminum plate and fin-based oil cooler kit not only reduces oil temperatures to help extend the life of lower end components and oil life, it also helps reduce coolant temperatures in the radiator and cooling system. This universal kit includes engine sandwich adapter, hose and everything you need to install on most passenger vehicles on the road today.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2001 - Buick LeSabre | V | 3800 | 6 Cyl 3.8L | 231 |
- NGK G-Power Platinum Spark Plug
- Gap 0.060"
- G-Power Spark Plug
- Product Attributes:
- Center Electrode Design: Fine Wire
- Center Electrode Insulator Tip Projection:
- 0.16
- 4.0
- Washer Included: No
- Electrical Terminal Type: Non-removable Nut
- Grade Type: Standard Replacement
- Service Number: Tr55gp
- Ground Electrode Tip Material: Nickel
- Short Style Spark Plug: No
- Skirt: No
- Center Electrode Core Material: Copper
- Part Number: Tr55gp
- Resistor Type: Yes
- Stock Number: 3403
- Ground Electrode Tip Design: Trapezoid
- Pre-Gap Size:
- .060
- 1.5
- Ground Electrode Core Material: Nickel
- Material Grade: Platinum
- Center Electrode Projection: Mid Projection
- Seat Type: Tapered
- Ground Electrode Quantity: 1
- Insulator Material: Ceramic
- Hex Size: 5/8" (16mm)
- Reach:
- 0.689
- 17.5
- Center Electrode Tip Material: Platinum
- Skirt Length: 0.0
- Manufacturer Heat Range: 5
- Ground Configuration: J-gap
- Resistance: 5000.0
- Insulator Height:
- 2.07
- 52.5
- Thread Diameter:
- 0.551
- 14.0
-
Features:
- RECOMMENDED USAGE: Lower cost alternative to double precious metal spark plugs or as an upgrade to OE nickel alloy spark plugs
- SINGLE PLATINUM TIP: Fine wire 0.6 millimeter platinum tip center electrode ensures improved durability and a consistently stable spark
- TRAPEZOIDAL CUT GROUND ELECTRODE: Reduces quenching design produces improved ignitability and performance
- PLATINUM ALLOY: G-Power platinum provides exceptional value with increased performance and longer service intervals than factory nickel plugs
- COLD-ROLLED THREADS: Prevents cross-threading and damage to cylinder heads
- SOLID COPPER CORE: 98% pure copper core offers superior heat dissipation, conductivity and ultra wide heat ranges
- NGK G-Power Platinum spark plugs are the best single platinum spark plugs at an economical price. G-Power plugs feature a fine wire platinum center electrode and a trapezoidal cut ground electrode that offers increased durability, improved fuel efficiency, lower emissions, faster starts and quicker acceleration over conventional nickel spark plugs. An excellent upgrade for vehicles which used nickel alloy spark plugs originally. For better performance consider upgrading to a NGK Iridium IX plug. For even greater performance consider upgrading to a NGK RUTHENIUM HX plug.
-
Suggested Purchase Quantity: 8
- Most jobs typically require 8 of this item.
- This item must be purchased in quantities of 4
This Part Fits the Following OEM/Substitute Numbers:
12, 14, 3013, 3015, 3015-2, 3401, 3401-2, 3403, 3408, 3408-2, 3983, 3983-2, 41-902, 4511, 6701, 6703, 6706, 6709...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2001 - Buick LeSabre | V | 3800 | 6 Cyl 3.8L | 231 |
- LEVELING COMPRESSOR CONTROL SYSTEM
- 2nd Generation; Incl Compressor/Manifold/Control Box
- Includes Compressor/Manifold/Control Box
- WirelessAIR Leveling Compressor Control System
- Product Attributes:
- Mounting Hardware Included: Yes
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: California: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
-
Features:
- Dual-path control of all brands of air springs
- Heavy-duty 120 PSI 1.03 CFM 9% duty cycle 12V air compressor
- Control your air springs individually from anywhere, at any time
- Compact, wireless handheld controller with LCD display, programmable with up to three user-defined presets and free iOS and Android mobile app easily connects with Bluetooth -enabled manifold
- Easy installation with common mechanics tools
- Two-year limited warranty and 60 day, no questions asked, money-back guarantee
- Offering easy and convenient air pressure adjustment for any brand of aftermarket air spring, the WirelessAir on-board air compressor system from Air Lift is ideal for the elite air spring user. This dual-path WirelessAir(TM) allows users to inflate or deflate each air spring separately, this allows each air spring to be filled to different air pressures, to better handle uneven or top-heavy loads, all powered by a heavy-duty compressor. This second-generation system offers easy control of your air springs through an upgraded, wireless handheld controller or the new mobile app. Installing the system is simple, with no air line or wiring needing to be routed through the cab of the vehicle. The included wiring harness, installation hardware, and a fully illustrated instruction manual ensure that WirelessAir(TM) will be up and running in no time. WirelessAir(TM) is now available with the EZ Mount system, which packages the manifold and heavy-duty compressor into a factory-assembled and tested bracket, making installation even easier. Backed by Air Lift's two-year limited warranty and 60-day, no-questions-asked, money-back guarantee, WirelessAir(TM) can be purchased with peace of mind.
Additional Fitment Information:
| Vehicle |
|---|
| 2001 - Buick LeSabre |
- Front Floor Mats
- Heavy Duty Floor Mats - Front Floor Mats
- Product Attributes:
- CA Prop 65 Type: Cancer And Reproductive
- Location: Front Row
- CA Prop 65: Y
- Category: Heavy Duty Floor Mats
- Fitment: Semi-universal Fit
- Requires Drilling: No
- Driver Position: Left Hand Drive Only
-
Features:
- Easily cleaned with patented Nibs on the reverse side to keep mat from shifting.
- The perimeter edge is raised to help keep all manner of mess contained, right where you want it.
- Our raised ridges help to keep your feet out of the mud, water, and dirt you just tracked in. You’re welcome.
- With the perfect balance of strength and softness, our rubberized DuraGrip™ material delivers no-slip, no-slide, driving confidence no matter what the road brings.
- UniEdge™ creates a wall around the center channel that funnels mud, snow and other liquids into the recessed ribs—containing the mess, until you can yank, dump, wash and repeat.
- Our exclusive StayPut Cleats™ help keep your liner from shifting around underfoot like lesser liners.
- When we say it’s “guaranteed for life” that is exactly what we mean. No hassles, no guff. If you have a problem, we’ll replace it.
- Proudly made in the USA.
- It's unbeatable Husky durability, custom fit to your vehicle, built for a lifetime of abuse. Its DuraGrip™ material stands up to harsh chemicals, while its UniEdge™ and center channel keep mud, snow and liquids contained, until you're ready to remove, wash and hit the road. Its StayPut Cleats™ keep it firmly anchored underfoot, and all Husky Heavy Duty floor mats mats are guaranteed for life. Found on the floors of the toughest trucks, vans and SUVs on earth.
Additional Fitment Information:
| Vehicle | Position | Region |
|---|---|---|
| 2001 - Buick LeSabre | Front | United States |
- Sold In Pairs; B Series; 15.75 in. x 8 in.; Plain Black
- Premier Fit Splashguards; Sold In Pairs; B Series; 15.75 in. x 8 in.; Plain Black;
- Premier Fit Splashguards
-
Features:
- Universal fit to protect your vehicle
- Molded from heavy duty material
- Comes complete with mounting hardware
- Protects vehicle from stonechips and road debris
- All season protection
- For DIY vehicle owners who enjoy the pride and confidence they feel from driving a vehicle that looks brand new, Roadsport Splash Guards provide high-quality, durable solutions to meet every need. Thats because RoadSport Splash Guards are designed with unbreakable materials and have a broad assortment for cars, trucks, SUVs, trailers and RVs so drivers can keep their vehicle looking like new.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2001 - Buick LeSabre | Rear |
Showing 1 - 10 of 15 products
Loading...